##############################################################################
##############################################################################
###
### Running command:
###
###   /home/biocbuild/R/R/bin/R CMD check --install=check:CBN2Path.install-out.txt --library=/home/biocbuild/R/R/site-library --no-vignettes --timings CBN2Path_1.0.0.tar.gz
###
##############################################################################
##############################################################################


* using log directory ‘/home/biocbuild/bbs-3.22-bioc/meat/CBN2Path.Rcheck’
* using R version 4.5.0 (2025-04-11)
* using platform: aarch64-unknown-linux-gnu
* R was compiled by
    aarch64-unknown-linux-gnu-gcc (GCC) 14.2.0
    GNU Fortran (GCC) 14.2.0
* running under: openEuler 24.03 (LTS)
* using session charset: UTF-8
* using option ‘--no-vignettes’
* checking for file ‘CBN2Path/DESCRIPTION’ ... OK
* this is package ‘CBN2Path’ version ‘1.0.0’
* package encoding: UTF-8
* checking package namespace information ... OK
* checking package dependencies ... OK
* checking if this is a source package ... OK
* checking if there is a namespace ... OK
* checking for hidden files and directories ... NOTE
Found the following hidden files and directories:
  .BBSoptions
These were most likely included in error. See section ‘Package
structure’ in the ‘Writing R Extensions’ manual.
* checking for portable file names ... OK
* checking for sufficient/correct file permissions ... OK
* checking whether package ‘CBN2Path’ can be installed ... OK
* used C compiler: ‘aarch64-unknown-linux-gnu-gcc (GCC) 14.2.0’
* checking installed package size ... OK
* checking package directory ... OK
* checking ‘build’ directory ... OK
* checking DESCRIPTION meta-information ... OK
* checking top-level files ... OK
* checking for left-over files ... OK
* checking index information ... OK
* checking package subdirectories ... NOTE
Found the following CITATION file in a non-standard place:
  CITATION.cff
Most likely ‘inst/CITATION’ should be used instead.
* checking code files for non-ASCII characters ... OK
* checking R files for syntax errors ... OK
* checking whether the package can be loaded ... OK
* checking whether the package can be loaded with stated dependencies ... OK
* checking whether the package can be unloaded cleanly ... OK
* checking whether the namespace can be loaded with stated dependencies ... OK
* checking whether the namespace can be unloaded cleanly ... OK
* checking loading without being on the library search path ... OK
* checking dependencies in R code ... OK
* checking S3 generic/method consistency ... OK
* checking replacement functions ... OK
* checking foreign function calls ... OK
* checking R code for possible problems ... NOTE
bcbn: no visible global function definition for ‘SnowParam’
bcbn: no visible binding for global variable ‘datasets’
ctcbn: no visible global function definition for ‘SnowParam’
generateGeomNodePoint: no visible binding for global variable ‘nodes’
generateGeomNodeText: no visible binding for global variable ‘nodes’
generateGgText: no visible binding for global variable ‘x’
generateGgText: no visible binding for global variable ‘y’
generateGgText: no visible binding for global variable ‘label’
generateMatrixGenotypes : f1 : <anonymous>: no visible global function
  definition for ‘combn’
hcbn: no visible global function definition for ‘SnowParam’
variableCapSize: no visible binding for global variable ‘edges’
variableCapSize: no visible binding for global variable ‘x’
variableCapSize: no visible binding for global variable ‘y’
visualizeCBNModel: no visible binding for global variable ‘name’
visualizeFitnessLandscape: no visible binding for global variable ‘x’
visualizeFitnessLandscape: no visible binding for global variable ‘y’
visualizeFitnessLandscape: no visible binding for global variable
  ‘name’
visualizeProbabilities: no visible binding for global variable ‘name’
Undefined global functions or variables:
  SnowParam combn datasets edges label name nodes x y
Consider adding
  importFrom("utils", "combn")
to your NAMESPACE file.
* checking Rd files ... OK
* checking Rd metadata ... OK
* checking Rd cross-references ... OK
* checking for missing documentation entries ... OK
* checking for code/documentation mismatches ... OK
* checking Rd \usage sections ... OK
* checking Rd contents ... OK
* checking for unstated dependencies in examples ... OK
* checking line endings in shell scripts ... OK
* checking line endings in C/C++/Fortran sources/headers ... OK
* checking line endings in Makefiles ... OK
* checking compilation flags in Makevars ... OK
* checking for GNU extensions in Makefiles ... OK
* checking for portable use of $(BLAS_LIBS) and $(LAPACK_LIBS) ... OK
* checking use of PKG_*FLAGS in Makefiles ... OK
* checking compiled code ... NOTE
Note: information on .o files is not available
* checking files in ‘vignettes’ ... OK
* checking examples ... OK
Examples with CPU (user + system) or elapsed time > 5s
                           user system elapsed
hcbnSingle              113.731  0.562 114.636
visualizeProbabilities   47.435  1.253  48.808
pathProbQuartetBCBN      38.324  0.711  39.134
bcbn                     24.315  1.649  26.009
jensenShannonDivergence  11.949  0.697  12.690
Predictability           11.298  0.582  11.915
pathProbQuartetRCBN       9.349  0.682  10.058
pathProbQuartetHCBN       7.037  0.571   7.629
pathProbQuartetCTCBN      6.685  0.546   7.253
* checking for unstated dependencies in ‘tests’ ... OK
* checking tests ...
  Running ‘testthat.R’
 OK
* checking for unstated dependencies in vignettes ... OK
* checking package vignettes ... OK
* checking running R code from vignettes ... SKIPPED
* checking re-building of vignette outputs ... SKIPPED
* checking PDF version of manual ... OK
* DONE

Status: 4 NOTEs
See
  ‘/home/biocbuild/bbs-3.22-bioc/meat/CBN2Path.Rcheck/00check.log’
for details.

##############################################################################
##############################################################################
###
### Running command:
###
###   /home/biocbuild/R/R/bin/R CMD INSTALL CBN2Path
###
##############################################################################
##############################################################################


* installing to library ‘/home/biocbuild/R/R-4.5.0/site-library’
* installing *source* package ‘CBN2Path’ ...
** this is package ‘CBN2Path’ version ‘1.0.0’
** using staged installation
checking for gcc... /opt/ohpc/pub/compiler/gcc/14.2.0/bin/aarch64-unknown-linux-gnu-gcc -std=gnu23
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether /opt/ohpc/pub/compiler/gcc/14.2.0/bin/aarch64-unknown-linux-gnu-gcc -std=gnu23 accepts -g... yes
checking for /opt/ohpc/pub/compiler/gcc/14.2.0/bin/aarch64-unknown-linux-gnu-gcc -std=gnu23 option to enable C11 features... none needed
checking for gsl-config... /usr/bin/gsl-config
checking if GSL version >= 2.5... yes
configure: creating ./config.status
config.status: creating src/Makevars
** libs
using C compiler: ‘aarch64-unknown-linux-gnu-gcc (GCC) 14.2.0’
/opt/ohpc/pub/compiler/gcc/14.2.0/bin/aarch64-unknown-linux-gnu-gcc -std=gnu23 -I"/home/biocbuild/R/R-4.5.0/include" -DNDEBUG -I/usr/include -I.  -I/usr/local/include    -fPIC  -g -O2  -Wall -Werror=format-security -c bcbn.c -o bcbn.o
bcbn.c: In function ‘bcbn_write_poset’:
bcbn.c:228:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
  228 |     for (j=0; j<n; j++)
      |     ^~~
bcbn.c:232:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
  232 |       fprintf(output, "0 0\n");
      |       ^~~~~~~
bcbn.c: In function ‘bcbn_is_equal_int_matrix’:
bcbn.c:332:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
  332 |     for (j=0; j<n; j++)
      |     ^~~
bcbn.c:336:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
  336 |       return 1;
      |       ^~~~~~
bcbn.c: In function ‘bcbn_free_lattice_children’:
bcbn.c:433:7: warning: unused variable ‘i’ [-Wunused-variable]
  433 |   int i;
      |       ^
bcbn.c: In function ‘bcbn_print_genotype’:
bcbn.c:641:7: warning: unused variable ‘i’ [-Wunused-variable]
  641 |   int i;
      |       ^
bcbn.c: In function ‘bcbn_bfs_order_ideals’:
bcbn.c:691:9: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
  691 |         for (j=0; j<lin_ext_size; j++)
      |         ^~~
bcbn.c:697:11: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
  697 |           if (! is_in)  // add to linear extension:
      |           ^~
bcbn.c: In function ‘bcbn_hamming_distance’:
bcbn.c:794:3: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
  794 |   for(i=0; i<n; i++)
      |   ^~~
bcbn.c:801:5: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
  801 |     free(g);
      |     ^~~~
bcbn.c: In function ‘compute_all_cbn_prob’:
bcbn.c:1056:13: warning: unused variable ‘k’ [-Wunused-variable]
 1056 |   int i,j,c,k;
      |             ^
bcbn.c:1056:9: warning: unused variable ‘j’ [-Wunused-variable]
 1056 |   int i,j,c,k;
      |         ^
bcbn.c: In function ‘bcbn_reduce_to_cover_relations’:
bcbn.c:1212:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 1212 |     for (j=0; j<n; j++)
      |     ^~~
bcbn.c:1219:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 1219 |       while (empty(&q) == FALSE)
      |       ^~~~~
bcbn.c: In function ‘compute_likelihood’:
bcbn.c:1281:15: warning: unused variable ‘likelihood’ [-Wunused-variable]
 1281 |   long double likelihood, likelihood_d;
      |               ^~~~~~~~~~
bcbn.c: In function ‘relocate_theta_i’:
bcbn.c:1367:25: warning: variable ‘x’ set but not used [-Wunused-but-set-variable]
 1367 |   double alpha,beta,var,x;
      |                         ^
bcbn.c:1367:21: warning: unused variable ‘var’ [-Wunused-variable]
 1367 |   double alpha,beta,var,x;
      |                     ^~~
bcbn.c: In function ‘compute_theta_transition_prob’:
bcbn.c:1380:25: warning: variable ‘x’ set but not used [-Wunused-but-set-variable]
 1380 |   double alpha,beta,var,x;
      |                         ^
bcbn.c:1380:21: warning: unused variable ‘var’ [-Wunused-variable]
 1380 |   double alpha,beta,var,x;
      |                     ^~~
bcbn.c: In function ‘propose_new_cover_relation’:
bcbn.c:1449:11: warning: unused variable ‘k’ [-Wunused-variable]
 1449 |   int i,j,k,N_compatible,N_all_comp;
      |           ^
bcbn.c: In function ‘get_tp_for_new_cover_move’:
bcbn.c:1550:35: warning: unused variable ‘k’ [-Wunused-variable]
 1550 |   int i,j,N_all_comp,N_compatible,k;
      |                                   ^
bcbn.c:1550:22: warning: unused variable ‘N_compatible’ [-Wunused-variable]
 1550 |   int i,j,N_all_comp,N_compatible,k;
      |                      ^~~~~~~~~~~~
bcbn.c:1550:11: warning: variable ‘N_all_comp’ set but not used [-Wunused-but-set-variable]
 1550 |   int i,j,N_all_comp,N_compatible,k;
      |           ^~~~~~~~~~
bcbn.c: In function ‘relocate_epsilon’:
bcbn.c:1675:25: warning: unused variable ‘x’ [-Wunused-variable]
 1675 |   double alpha,beta,var,x;
      |                         ^
bcbn.c:1675:21: warning: unused variable ‘var’ [-Wunused-variable]
 1675 |   double alpha,beta,var,x;
      |                     ^~~
bcbn.c:1675:16: warning: unused variable ‘beta’ [-Wunused-variable]
 1675 |   double alpha,beta,var,x;
      |                ^~~~
bcbn.c:1675:10: warning: unused variable ‘alpha’ [-Wunused-variable]
 1675 |   double alpha,beta,var,x;
      |          ^~~~~
bcbn.c: In function ‘propose_new_bcbn_transitive_closure_relation’:
bcbn.c:1755:11: warning: unused variable ‘k’ [-Wunused-variable]
 1755 |   int i,j,k,N_compatible,N_all_comp;
      |           ^
bcbn.c: In function ‘propose_delete_bcbn_transitive_closure_relation’:
bcbn.c:1878:26: warning: variable ‘N_all_comp’ set but not used [-Wunused-but-set-variable]
 1878 |   int i,j,k,N_compatible,N_all_comp;
      |                          ^~~~~~~~~~
bcbn.c:1878:13: warning: unused variable ‘N_compatible’ [-Wunused-variable]
 1878 |   int i,j,k,N_compatible,N_all_comp;
      |             ^~~~~~~~~~~~
bcbn.c:1878:11: warning: unused variable ‘k’ [-Wunused-variable]
 1878 |   int i,j,k,N_compatible,N_all_comp;
      |           ^
bcbn.c: In function ‘get_tp_for_delete_bcbn_transitive_closure_relation_move’:
bcbn.c:1957:7: warning: unused variable ‘c’ [-Wunused-variable]
 1957 |   int c = 0;
      |       ^
bcbn.c:1946:26: warning: variable ‘N_all_comp’ set but not used [-Wunused-but-set-variable]
 1946 |   int i,j,k,N_compatible,N_all_comp;
      |                          ^~~~~~~~~~
bcbn.c:1946:13: warning: unused variable ‘N_compatible’ [-Wunused-variable]
 1946 |   int i,j,k,N_compatible,N_all_comp;
      |             ^~~~~~~~~~~~
bcbn.c:1946:11: warning: unused variable ‘k’ [-Wunused-variable]
 1946 |   int i,j,k,N_compatible,N_all_comp;
      |           ^
bcbn.c: In function ‘get_tp_for_new_bcbn_transitive_closure_relation_move’:
bcbn.c:2008:7: warning: unused variable ‘c’ [-Wunused-variable]
 2008 |   int c = 0;
      |       ^
bcbn.c:1997:26: warning: variable ‘N_all_comp’ set but not used [-Wunused-but-set-variable]
 1997 |   int i,j,k,N_compatible,N_all_comp;
      |                          ^~~~~~~~~~
bcbn.c:1997:13: warning: unused variable ‘N_compatible’ [-Wunused-variable]
 1997 |   int i,j,k,N_compatible,N_all_comp;
      |             ^~~~~~~~~~~~
bcbn.c:1997:11: warning: unused variable ‘k’ [-Wunused-variable]
 1997 |   int i,j,k,N_compatible,N_all_comp;
      |           ^
bcbn.c: In function ‘start_Exp_theta_MH’:
bcbn.c:2362:7: warning: unused variable ‘accepted’ [-Wunused-variable]
 2362 |   int accepted = 0;
      |       ^~~~~~~~
bcbn.c:2358:9: warning: unused variable ‘j’ [-Wunused-variable]
 2358 |   int i,j,k = 0;
      |         ^
bcbn.c:2358:7: warning: unused variable ‘i’ [-Wunused-variable]
 2358 |   int i,j,k = 0;
      |       ^
bcbn.c: In function ‘run_MH_sampler’:
bcbn.c:2620:22: warning: unused variable ‘MH_ratio’ [-Wunused-variable]
 2620 |   long double alpha, MH_ratio;
      |                      ^~~~~~~~
/opt/ohpc/pub/compiler/gcc/14.2.0/bin/aarch64-unknown-linux-gnu-gcc -std=gnu23 -I"/home/biocbuild/R/R-4.5.0/include" -DNDEBUG -I/usr/include -I.  -I/usr/local/include    -fPIC  -g -O2  -Wall -Werror=format-security -c ctcbn.c -o ctcbn.o
In file included from ctcbn.c:3:
ct-cbn.h: In function ‘print_int_array’:
ct-cbn.h:184:7: warning: unused variable ‘j’ [-Wunused-variable]
  184 |   int j;
      |       ^
ct-cbn.h: In function ‘write_poset’:
ct-cbn.h:274:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
  274 |     for (j=1; j<=n; j++)
      |     ^~~
ct-cbn.h:278:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
  278 |       fprintf(output, "0\n");
      |       ^~~~~~~
ct-cbn.h: In function ‘print_genotype’:
ct-cbn.h:803:7: warning: unused variable ‘i’ [-Wunused-variable]
  803 |   int i;
      |       ^
ct-cbn.h: In function ‘bfs_order_ideals’:
ct-cbn.h:853:9: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
  853 |         for (j=0; j<lin_ext_size; j++)
      |         ^~~
ct-cbn.h:859:11: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
  859 |           if (! is_in)  // add to linear extension:
      |           ^~
ct-cbn.h: In function ‘hamming_distance’:
ct-cbn.h:956:3: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
  956 |   for(i=0; i<n; i++)
      |   ^~~
ct-cbn.h:963:5: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
  963 |     free(g);
      |     ^~~~
ct-cbn.h: In function ‘is_after’:
ct-cbn.h:1198:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 1198 |     for ( a=0; a<=M->n; a++ )
      |     ^~~
ct-cbn.h:1201:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 1201 |       return 1;
      |       ^~~~~~
ct-cbn.h: In function ‘is_strict_after’:
ct-cbn.h:1211:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 1211 |     for ( a=0; a<=M->n; a++ )
      |     ^~~
ct-cbn.h:1214:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 1214 |       return 1;
      |       ^~~~~~
ct-cbn.h: In function ‘compute_all_exp’:
ct-cbn.h:1283: warning: ignoring ‘#pragma omp parallel’ [-Wunknown-pragmas]
 1283 | #pragma omp parallel for private(i,c,k,j,g, all_pred_in_k, pred,l)
ct-cbn.h:1318:11: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 1318 |           for (l = 0; l < m; l++)
      |           ^~~
ct-cbn.h:1346:13: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 1346 |             Exp[pos][i] = censexp[pos][i][m-1];
      |             ^~~
ct-cbn.h: In function ‘EM_epsilon’:
ct-cbn.h:1440:7: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 1440 |       for(i = 1; i < m; i++)
      |       ^~~
ct-cbn.h:1447:9: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 1447 |         loglik_new += log (prob_tmp) * D[k].count;
      |         ^~~~~~~~~~
ct-cbn.h: In function ‘compute_loglik’:
ct-cbn.h:1471:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 1471 |     for(i = 1; i < m; i++)
      |     ^~~
ct-cbn.h:1477:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 1477 |       loglik[k] = log (prob_tmp) ;
      |       ^~~~~~
ct-cbn.h: In function ‘MLE’:
ct-cbn.h:1833:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 1833 |     for (k=0; k<N_u; k++)
      |     ^~~
ct-cbn.h:1839:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 1839 |       lambda[i] = (double) N / sum;
      |       ^~~~~~
ct-cbn.h: In function ‘EM’:
ct-cbn.h:1920:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 1920 |     for (k=0; k<N_u; k++)
      |     ^~~
ct-cbn.h:1939:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 1939 |       if (verbose)
      |       ^~
ct-cbn.h: In function ‘violation_map’:
ct-cbn.h:2488:3: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 2488 |   for (i=1; i<=n; i++)
      |   ^~~
ct-cbn.h:2502:5: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 2502 |     qsort(V, idx, sizeof(int *), compare_violation_pairs);  // small violators first
      |     ^~~~~
ct-cbn.h: In function ‘reduce_to_cover_relations’:
ct-cbn.h:2524:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 2524 |     for (j=1; j<=n; j++)
      |     ^~~
ct-cbn.h:2531:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 2531 |       while (empty(&q) == FALSE)
      |       ^~~~~
ct-cbn.h: In function ‘try_edge’:
ct-cbn.h:2741:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 2741 |     for(j=0;j<n*n;j++)
      |     ^~~
ct-cbn.h:2744:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 2744 |       R4[i] = c;
      |       ^~
ct-cbn.h:2784:13: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 2784 |             for(i=1;i<n+1;i++)
      |             ^~~
ct-cbn.h:2790:15: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 2790 |               if(c == 1)
      |               ^~
ct-cbn.h:2943:13: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 2943 |             for(i=1;i<n+1;i++)
      |             ^~~
ct-cbn.h:2949:15: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 2949 |               if(c == 1)
      |               ^~
ct-cbn.h:2721:17: warning: variable ‘alpha_new’ set but not used [-Wunused-but-set-variable]
 2721 |   double alpha, alpha_new;
      |                 ^~~~~~~~~
ct-cbn.h: In function ‘local_search’:
ct-cbn.h:3134:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 3134 |     for(j=1;j<=M->n;j++)
      |     ^~~
ct-cbn.h:3161:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 3161 |       print_double_matrix(loglik_next, M->n, M->n);
      |       ^~~~~~~~~~~~~~~~~~~
ct-cbn.h: In function ‘is_equal_int_matrix’:
ct-cbn.h:3196:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 3196 |     for (j=0; j<n; j++)
      |     ^~~
ct-cbn.h:3200:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 3200 |       return 1;
      |       ^~~~~~
ct-cbn.h: In function ‘ML_path’:
ct-cbn.h:3305:7: warning: variable ‘mut_next’ set but not used [-Wunused-but-set-variable]
 3305 |   int mut_next, index_next;
      |       ^~~~~~~~
ctcbn.c: In function ‘ctcbn_’:
ctcbn.c:88:7: warning: unused variable ‘c’ [-Wunused-variable]
   88 |   int c = 0;
      |       ^
ctcbn.c:84:7: warning: unused variable ‘GPS’ [-Wunused-variable]
   84 |   int GPS = 0;
      |       ^~~
ctcbn.c:79:7: warning: unused variable ‘verbose’ [-Wunused-variable]
   79 |   int verbose = 0;
      |       ^~~~~~~
ctcbn.c: In function ‘hcbn_’:
ctcbn.c:319:7: warning: unused variable ‘c’ [-Wunused-variable]
  319 |   int c = 0;
      |       ^
ctcbn.c:314:7: warning: variable ‘N_iter’ set but not used [-Wunused-but-set-variable]
  314 |   int N_iter = 0;
      |       ^~~~~~
ctcbn.c:313:10: warning: unused variable ‘T’ [-Wunused-variable]
  313 |   double T = REAL(temp)[0];
      |          ^
ctcbn.c:308:7: warning: unused variable ‘t_flag’ [-Wunused-variable]
  308 |   int t_flag = 1;
      |       ^~~~~~
ctcbn.c:306:7: warning: unused variable ‘l_flag’ [-Wunused-variable]
  306 |   int l_flag = 0;
      |       ^~~~~~
ctcbn.c:305:7: warning: unused variable ‘gps_flag’ [-Wunused-variable]
  305 |   int gps_flag = 0;
      |       ^~~~~~~~
ctcbn.c:304:7: warning: variable ‘e_flag’ set but not used [-Wunused-but-set-variable]
  304 |   int e_flag = 0;
      |       ^~~~~~
ctcbn.c:303:7: warning: unused variable ‘f_flag’ [-Wunused-variable]
  303 |   int f_flag = 0;
      |       ^~~~~~
ctcbn.c:302:7: warning: unused variable ‘error_flag’ [-Wunused-variable]
  302 |   int error_flag = 0;
      |       ^~~~~~~~~~
ctcbn.c:468:10: warning: ‘rOutput’ may be used uninitialized [-Wmaybe-uninitialized]
  468 |   return char_to_sexp(rOutput);
      |          ^~~~~~~~~~~~~~~~~~~~~
ctcbn.c:320:9: note: ‘rOutput’ was declared here
  320 |   char* rOutput;
      |         ^~~~~~~
/opt/ohpc/pub/compiler/gcc/14.2.0/bin/aarch64-unknown-linux-gnu-gcc -std=gnu23 -I"/home/biocbuild/R/R-4.5.0/include" -DNDEBUG -I/usr/include -I.  -I/usr/local/include    -fPIC  -g -O2  -Wall -Werror=format-security -c init.c -o init.o
/opt/ohpc/pub/compiler/gcc/14.2.0/bin/aarch64-unknown-linux-gnu-gcc -std=gnu23 -I"/home/biocbuild/R/R-4.5.0/include" -DNDEBUG -I/usr/include -I.  -I/usr/local/include    -fPIC  -g -O2  -Wall -Werror=format-security -c queue.c -o queue.o
/opt/ohpc/pub/compiler/gcc/14.2.0/bin/aarch64-unknown-linux-gnu-gcc -std=gnu23 -shared -L/home/biocbuild/R/R-4.5.0/lib -L/usr/local/lib -o CBN2Path.so bcbn.o ctcbn.o init.o queue.o -L/usr/lib64 -lgsl -lgslcblas -lm -L/home/biocbuild/R/R-4.5.0/lib -lR
installing to /home/biocbuild/R/R-4.5.0/site-library/00LOCK-CBN2Path/00new/CBN2Path/libs
** R
** inst
** byte-compile and prepare package for lazy loading
** help
*** installing help indices
** building package indices
** installing vignettes
** testing if installed package can be loaded from temporary location
** checking absolute paths in shared objects and dynamic libraries
** testing if installed package can be loaded from final location
** testing if installed package keeps a record of temporary installation path
* DONE (CBN2Path)

R version 4.5.0 (2025-04-11) -- "How About a Twenty-Six"
Copyright (C) 2025 The R Foundation for Statistical Computing
Platform: aarch64-unknown-linux-gnu

R is free software and comes with ABSOLUTELY NO WARRANTY.
You are welcome to redistribute it under certain conditions.
Type 'license()' or 'licence()' for distribution details.

R is a collaborative project with many contributors.
Type 'contributors()' for more information and
'citation()' on how to cite R or R packages in publications.

Type 'demo()' for some demos, 'help()' for on-line help, or
'help.start()' for an HTML browser interface to help.
Type 'q()' to quit R.

> # This file is part of the standard setup for testthat.
> # It is recommended that you do not modify it.
> #
> # Where should you do additional test configuration?
> # Learn more about the roles of various files in:
> # * https://r-pkgs.org/testing-design.html#sec-tests-files-overview
> # * https://testthat.r-lib.org/articles/special-files.html
> 
> library(testthat)
> library(CBN2Path)
> 
> test_check("CBN2Path")
chain: 1
0
chain: 2
0
chain: 3
0
chain: 4
0
       V1                V2                  V3                  V4         
 Min.   :0.09609   Min.   :0.0001328   Min.   :0.0008008   Min.   :0.02427  
 1st Qu.:0.75786   1st Qu.:0.2292475   1st Qu.:0.4110350   1st Qu.:0.11179  
 Median :0.87016   Median :0.3936111   Median :0.5599016   Median :0.13877  
 Mean   :0.83187   Mean   :0.4198599   Mean   :0.5613320   Mean   :0.14343  
 3rd Qu.:0.94522   3rd Qu.:0.5881264   3rd Qu.:0.7204446   3rd Qu.:0.17195  
 Max.   :0.99995   Max.   :0.9999645   Max.   :0.9992787   Max.   :0.33084  
       V5         
 Min.   :-12.567  
 1st Qu.: -8.899  
 Median : -8.502  
 Mean   : -8.620  
 3rd Qu.: -8.206  
 Max.   : -7.723  
       V1                V2                  V3                  V4         
 Min.   :0.09626   Min.   :3.498e-05   Min.   :0.0001156   Min.   :0.02675  
 1st Qu.:0.75863   1st Qu.:2.323e-01   1st Qu.:0.4036366   1st Qu.:0.11108  
 Median :0.86970   Median :3.909e-01   Median :0.5617385   Median :0.13893  
 Mean   :0.83287   Mean   :4.172e-01   Mean   :0.5605880   Mean   :0.14179  
 3rd Qu.:0.94351   3rd Qu.:5.836e-01   3rd Qu.:0.7190597   3rd Qu.:0.16846  
 Max.   :0.99997   Max.   :1.000e+00   Max.   :0.9999257   Max.   :0.34959  
       V5         
 Min.   :-13.609  
 1st Qu.: -8.887  
 Median : -8.488  
 Mean   : -8.612  
 3rd Qu.: -8.203  
 Max.   : -7.725  
       V1               V2                 V3                  V4         
 Min.   :0.0865   Min.   :0.000159   Min.   :0.0001637   Min.   :0.01953  
 1st Qu.:0.7508   1st Qu.:0.229377   1st Qu.:0.4129722   1st Qu.:0.11049  
 Median :0.8667   Median :0.392031   Median :0.5691120   Median :0.13803  
 Mean   :0.8287   Mean   :0.417275   Mean   :0.5656735   Mean   :0.14215  
 3rd Qu.:0.9412   3rd Qu.:0.582659   3rd Qu.:0.7233375   3rd Qu.:0.16868  
 Max.   :1.0000   Max.   :0.999899   Max.   :0.9999777   Max.   :0.34939  
       V5         
 Min.   :-13.471  
 1st Qu.: -8.899  
 Median : -8.494  
 Mean   : -8.618  
 3rd Qu.: -8.209  
 Max.   : -7.718  
       V1                V2                  V3                  V4         
 Min.   :0.06064   Min.   :0.0000497   Min.   :0.0004446   Min.   :0.02143  
 1st Qu.:0.76374   1st Qu.:0.2227511   1st Qu.:0.4098770   1st Qu.:0.11203  
 Median :0.87469   Median :0.3838707   Median :0.5612410   Median :0.13892  
 Mean   :0.83645   Mean   :0.4120150   Mean   :0.5606574   Mean   :0.14328  
 3rd Qu.:0.94691   3rd Qu.:0.5800418   3rd Qu.:0.7177179   3rd Qu.:0.17241  
 Max.   :1.00000   Max.   :0.9999658   Max.   :0.9999638   Max.   :0.39072  
       V5         
 Min.   :-15.093  
 1st Qu.: -8.894  
 Median : -8.492  
 Mean   : -8.612  
 3rd Qu.: -8.200  
 Max.   : -7.719  
[1] "Criterion: 1.00058353878581"
Potential scale reduction factors:

     Point est. Upper C.I.
[1,]          1          1
[2,]          1          1
[3,]          1          1
[4,]          1          1
[5,]          1          1

Multivariate psrf

1
[1] "##########################################"
[ FAIL 0 | WARN 2 | SKIP 0 | PASS 9 ]

[ FAIL 0 | WARN 2 | SKIP 0 | PASS 9 ]
> 
> proc.time()
   user  system elapsed 
153.654   1.547 155.560