##############################################################################
##############################################################################
###
### Running command:
###
###   /home/biocbuild/R/R/bin/R CMD check --install=check:CBN2Path.install-out.txt --library=/home/biocbuild/R/R/site-library --no-vignettes --timings CBN2Path_1.0.0.tar.gz
###
##############################################################################
##############################################################################


* using log directory ‘/home/biocbuild/bbs-3.22-bioc/meat/CBN2Path.Rcheck’
* using R version 4.5.0 (2025-04-11)
* using platform: aarch64-unknown-linux-gnu
* R was compiled by
    aarch64-unknown-linux-gnu-gcc (GCC) 14.2.0
    GNU Fortran (GCC) 14.2.0
* running under: openEuler 24.03 (LTS)
* using session charset: UTF-8
* using option ‘--no-vignettes’
* checking for file ‘CBN2Path/DESCRIPTION’ ... OK
* this is package ‘CBN2Path’ version ‘1.0.0’
* package encoding: UTF-8
* checking package namespace information ... OK
* checking package dependencies ... OK
* checking if this is a source package ... OK
* checking if there is a namespace ... OK
* checking for hidden files and directories ... NOTE
Found the following hidden files and directories:
  .BBSoptions
These were most likely included in error. See section ‘Package
structure’ in the ‘Writing R Extensions’ manual.
* checking for portable file names ... OK
* checking for sufficient/correct file permissions ... OK
* checking whether package ‘CBN2Path’ can be installed ... OK
* used C compiler: ‘aarch64-unknown-linux-gnu-gcc (GCC) 14.2.0’
* checking installed package size ... OK
* checking package directory ... OK
* checking ‘build’ directory ... OK
* checking DESCRIPTION meta-information ... OK
* checking top-level files ... OK
* checking for left-over files ... OK
* checking index information ... OK
* checking package subdirectories ... NOTE
Found the following CITATION file in a non-standard place:
  CITATION.cff
Most likely ‘inst/CITATION’ should be used instead.
* checking code files for non-ASCII characters ... OK
* checking R files for syntax errors ... OK
* checking whether the package can be loaded ... OK
* checking whether the package can be loaded with stated dependencies ... OK
* checking whether the package can be unloaded cleanly ... OK
* checking whether the namespace can be loaded with stated dependencies ... OK
* checking whether the namespace can be unloaded cleanly ... OK
* checking loading without being on the library search path ... OK
* checking dependencies in R code ... OK
* checking S3 generic/method consistency ... OK
* checking replacement functions ... OK
* checking foreign function calls ... OK
* checking R code for possible problems ... NOTE
bcbn: no visible global function definition for ‘SnowParam’
bcbn: no visible binding for global variable ‘datasets’
ctcbn: no visible global function definition for ‘SnowParam’
generateGeomNodePoint: no visible binding for global variable ‘nodes’
generateGeomNodeText: no visible binding for global variable ‘nodes’
generateGgText: no visible binding for global variable ‘x’
generateGgText: no visible binding for global variable ‘y’
generateGgText: no visible binding for global variable ‘label’
generateMatrixGenotypes : f1 : <anonymous>: no visible global function
  definition for ‘combn’
hcbn: no visible global function definition for ‘SnowParam’
variableCapSize: no visible binding for global variable ‘edges’
variableCapSize: no visible binding for global variable ‘x’
variableCapSize: no visible binding for global variable ‘y’
visualizeCBNModel: no visible binding for global variable ‘name’
visualizeFitnessLandscape: no visible binding for global variable ‘x’
visualizeFitnessLandscape: no visible binding for global variable ‘y’
visualizeFitnessLandscape: no visible binding for global variable
  ‘name’
visualizeProbabilities: no visible binding for global variable ‘name’
Undefined global functions or variables:
  SnowParam combn datasets edges label name nodes x y
Consider adding
  importFrom("utils", "combn")
to your NAMESPACE file.
* checking Rd files ... OK
* checking Rd metadata ... OK
* checking Rd cross-references ... OK
* checking for missing documentation entries ... OK
* checking for code/documentation mismatches ... OK
* checking Rd \usage sections ... OK
* checking Rd contents ... OK
* checking for unstated dependencies in examples ... OK
* checking line endings in shell scripts ... OK
* checking line endings in C/C++/Fortran sources/headers ... OK
* checking line endings in Makefiles ... OK
* checking compilation flags in Makevars ... OK
* checking for GNU extensions in Makefiles ... OK
* checking for portable use of $(BLAS_LIBS) and $(LAPACK_LIBS) ... OK
* checking use of PKG_*FLAGS in Makefiles ... OK
* checking compiled code ... NOTE
Note: information on .o files is not available
* checking files in ‘vignettes’ ... OK
* checking examples ... OK
Examples with CPU (user + system) or elapsed time > 5s
                           user system elapsed
hcbnSingle              114.834  0.296 115.388
visualizeProbabilities   46.512  0.442  47.087
pathProbQuartetBCBN      38.335  0.834  39.258
bcbn                     24.225  1.726  25.976
jensenShannonDivergence  11.709  0.734  12.481
Predictability           11.154  0.699  11.883
pathProbQuartetRCBN       9.399  0.878  10.303
pathProbQuartetHCBN       6.849  0.739   7.606
pathProbQuartetCTCBN      6.693  0.674   7.395
* checking for unstated dependencies in ‘tests’ ... OK
* checking tests ...
  Running ‘testthat.R’
 OK
* checking for unstated dependencies in vignettes ... OK
* checking package vignettes ... OK
* checking running R code from vignettes ... SKIPPED
* checking re-building of vignette outputs ... SKIPPED
* checking PDF version of manual ... OK
* DONE

Status: 4 NOTEs
See
  ‘/home/biocbuild/bbs-3.22-bioc/meat/CBN2Path.Rcheck/00check.log’
for details.

##############################################################################
##############################################################################
###
### Running command:
###
###   /home/biocbuild/R/R/bin/R CMD INSTALL CBN2Path
###
##############################################################################
##############################################################################


* installing to library ‘/home/biocbuild/R/R-4.5.0/site-library’
* installing *source* package ‘CBN2Path’ ...
** this is package ‘CBN2Path’ version ‘1.0.0’
** using staged installation
checking for gcc... /opt/ohpc/pub/compiler/gcc/14.2.0/bin/aarch64-unknown-linux-gnu-gcc -std=gnu23
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether /opt/ohpc/pub/compiler/gcc/14.2.0/bin/aarch64-unknown-linux-gnu-gcc -std=gnu23 accepts -g... yes
checking for /opt/ohpc/pub/compiler/gcc/14.2.0/bin/aarch64-unknown-linux-gnu-gcc -std=gnu23 option to enable C11 features... none needed
checking for gsl-config... /usr/bin/gsl-config
checking if GSL version >= 2.5... yes
configure: creating ./config.status
config.status: creating src/Makevars
** libs
using C compiler: ‘aarch64-unknown-linux-gnu-gcc (GCC) 14.2.0’
/opt/ohpc/pub/compiler/gcc/14.2.0/bin/aarch64-unknown-linux-gnu-gcc -std=gnu23 -I"/home/biocbuild/R/R-4.5.0/include" -DNDEBUG -I/usr/include -I.  -I/usr/local/include    -fPIC  -g -O2  -Wall -Werror=format-security -c bcbn.c -o bcbn.o
bcbn.c: In function ‘bcbn_write_poset’:
bcbn.c:228:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
  228 |     for (j=0; j<n; j++)
      |     ^~~
bcbn.c:232:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
  232 |       fprintf(output, "0 0\n");
      |       ^~~~~~~
bcbn.c: In function ‘bcbn_is_equal_int_matrix’:
bcbn.c:332:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
  332 |     for (j=0; j<n; j++)
      |     ^~~
bcbn.c:336:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
  336 |       return 1;
      |       ^~~~~~
bcbn.c: In function ‘bcbn_free_lattice_children’:
bcbn.c:433:7: warning: unused variable ‘i’ [-Wunused-variable]
  433 |   int i;
      |       ^
bcbn.c: In function ‘bcbn_print_genotype’:
bcbn.c:641:7: warning: unused variable ‘i’ [-Wunused-variable]
  641 |   int i;
      |       ^
bcbn.c: In function ‘bcbn_bfs_order_ideals’:
bcbn.c:691:9: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
  691 |         for (j=0; j<lin_ext_size; j++)
      |         ^~~
bcbn.c:697:11: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
  697 |           if (! is_in)  // add to linear extension:
      |           ^~
bcbn.c: In function ‘bcbn_hamming_distance’:
bcbn.c:794:3: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
  794 |   for(i=0; i<n; i++)
      |   ^~~
bcbn.c:801:5: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
  801 |     free(g);
      |     ^~~~
bcbn.c: In function ‘compute_all_cbn_prob’:
bcbn.c:1056:13: warning: unused variable ‘k’ [-Wunused-variable]
 1056 |   int i,j,c,k;
      |             ^
bcbn.c:1056:9: warning: unused variable ‘j’ [-Wunused-variable]
 1056 |   int i,j,c,k;
      |         ^
bcbn.c: In function ‘bcbn_reduce_to_cover_relations’:
bcbn.c:1212:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 1212 |     for (j=0; j<n; j++)
      |     ^~~
bcbn.c:1219:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 1219 |       while (empty(&q) == FALSE)
      |       ^~~~~
bcbn.c: In function ‘compute_likelihood’:
bcbn.c:1281:15: warning: unused variable ‘likelihood’ [-Wunused-variable]
 1281 |   long double likelihood, likelihood_d;
      |               ^~~~~~~~~~
bcbn.c: In function ‘relocate_theta_i’:
bcbn.c:1367:25: warning: variable ‘x’ set but not used [-Wunused-but-set-variable]
 1367 |   double alpha,beta,var,x;
      |                         ^
bcbn.c:1367:21: warning: unused variable ‘var’ [-Wunused-variable]
 1367 |   double alpha,beta,var,x;
      |                     ^~~
bcbn.c: In function ‘compute_theta_transition_prob’:
bcbn.c:1380:25: warning: variable ‘x’ set but not used [-Wunused-but-set-variable]
 1380 |   double alpha,beta,var,x;
      |                         ^
bcbn.c:1380:21: warning: unused variable ‘var’ [-Wunused-variable]
 1380 |   double alpha,beta,var,x;
      |                     ^~~
bcbn.c: In function ‘propose_new_cover_relation’:
bcbn.c:1449:11: warning: unused variable ‘k’ [-Wunused-variable]
 1449 |   int i,j,k,N_compatible,N_all_comp;
      |           ^
bcbn.c: In function ‘get_tp_for_new_cover_move’:
bcbn.c:1550:35: warning: unused variable ‘k’ [-Wunused-variable]
 1550 |   int i,j,N_all_comp,N_compatible,k;
      |                                   ^
bcbn.c:1550:22: warning: unused variable ‘N_compatible’ [-Wunused-variable]
 1550 |   int i,j,N_all_comp,N_compatible,k;
      |                      ^~~~~~~~~~~~
bcbn.c:1550:11: warning: variable ‘N_all_comp’ set but not used [-Wunused-but-set-variable]
 1550 |   int i,j,N_all_comp,N_compatible,k;
      |           ^~~~~~~~~~
bcbn.c: In function ‘relocate_epsilon’:
bcbn.c:1675:25: warning: unused variable ‘x’ [-Wunused-variable]
 1675 |   double alpha,beta,var,x;
      |                         ^
bcbn.c:1675:21: warning: unused variable ‘var’ [-Wunused-variable]
 1675 |   double alpha,beta,var,x;
      |                     ^~~
bcbn.c:1675:16: warning: unused variable ‘beta’ [-Wunused-variable]
 1675 |   double alpha,beta,var,x;
      |                ^~~~
bcbn.c:1675:10: warning: unused variable ‘alpha’ [-Wunused-variable]
 1675 |   double alpha,beta,var,x;
      |          ^~~~~
bcbn.c: In function ‘propose_new_bcbn_transitive_closure_relation’:
bcbn.c:1755:11: warning: unused variable ‘k’ [-Wunused-variable]
 1755 |   int i,j,k,N_compatible,N_all_comp;
      |           ^
bcbn.c: In function ‘propose_delete_bcbn_transitive_closure_relation’:
bcbn.c:1878:26: warning: variable ‘N_all_comp’ set but not used [-Wunused-but-set-variable]
 1878 |   int i,j,k,N_compatible,N_all_comp;
      |                          ^~~~~~~~~~
bcbn.c:1878:13: warning: unused variable ‘N_compatible’ [-Wunused-variable]
 1878 |   int i,j,k,N_compatible,N_all_comp;
      |             ^~~~~~~~~~~~
bcbn.c:1878:11: warning: unused variable ‘k’ [-Wunused-variable]
 1878 |   int i,j,k,N_compatible,N_all_comp;
      |           ^
bcbn.c: In function ‘get_tp_for_delete_bcbn_transitive_closure_relation_move’:
bcbn.c:1957:7: warning: unused variable ‘c’ [-Wunused-variable]
 1957 |   int c = 0;
      |       ^
bcbn.c:1946:26: warning: variable ‘N_all_comp’ set but not used [-Wunused-but-set-variable]
 1946 |   int i,j,k,N_compatible,N_all_comp;
      |                          ^~~~~~~~~~
bcbn.c:1946:13: warning: unused variable ‘N_compatible’ [-Wunused-variable]
 1946 |   int i,j,k,N_compatible,N_all_comp;
      |             ^~~~~~~~~~~~
bcbn.c:1946:11: warning: unused variable ‘k’ [-Wunused-variable]
 1946 |   int i,j,k,N_compatible,N_all_comp;
      |           ^
bcbn.c: In function ‘get_tp_for_new_bcbn_transitive_closure_relation_move’:
bcbn.c:2008:7: warning: unused variable ‘c’ [-Wunused-variable]
 2008 |   int c = 0;
      |       ^
bcbn.c:1997:26: warning: variable ‘N_all_comp’ set but not used [-Wunused-but-set-variable]
 1997 |   int i,j,k,N_compatible,N_all_comp;
      |                          ^~~~~~~~~~
bcbn.c:1997:13: warning: unused variable ‘N_compatible’ [-Wunused-variable]
 1997 |   int i,j,k,N_compatible,N_all_comp;
      |             ^~~~~~~~~~~~
bcbn.c:1997:11: warning: unused variable ‘k’ [-Wunused-variable]
 1997 |   int i,j,k,N_compatible,N_all_comp;
      |           ^
bcbn.c: In function ‘start_Exp_theta_MH’:
bcbn.c:2362:7: warning: unused variable ‘accepted’ [-Wunused-variable]
 2362 |   int accepted = 0;
      |       ^~~~~~~~
bcbn.c:2358:9: warning: unused variable ‘j’ [-Wunused-variable]
 2358 |   int i,j,k = 0;
      |         ^
bcbn.c:2358:7: warning: unused variable ‘i’ [-Wunused-variable]
 2358 |   int i,j,k = 0;
      |       ^
bcbn.c: In function ‘run_MH_sampler’:
bcbn.c:2620:22: warning: unused variable ‘MH_ratio’ [-Wunused-variable]
 2620 |   long double alpha, MH_ratio;
      |                      ^~~~~~~~
/opt/ohpc/pub/compiler/gcc/14.2.0/bin/aarch64-unknown-linux-gnu-gcc -std=gnu23 -I"/home/biocbuild/R/R-4.5.0/include" -DNDEBUG -I/usr/include -I.  -I/usr/local/include    -fPIC  -g -O2  -Wall -Werror=format-security -c ctcbn.c -o ctcbn.o
In file included from ctcbn.c:3:
ct-cbn.h: In function ‘print_int_array’:
ct-cbn.h:184:7: warning: unused variable ‘j’ [-Wunused-variable]
  184 |   int j;
      |       ^
ct-cbn.h: In function ‘write_poset’:
ct-cbn.h:274:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
  274 |     for (j=1; j<=n; j++)
      |     ^~~
ct-cbn.h:278:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
  278 |       fprintf(output, "0\n");
      |       ^~~~~~~
ct-cbn.h: In function ‘print_genotype’:
ct-cbn.h:803:7: warning: unused variable ‘i’ [-Wunused-variable]
  803 |   int i;
      |       ^
ct-cbn.h: In function ‘bfs_order_ideals’:
ct-cbn.h:853:9: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
  853 |         for (j=0; j<lin_ext_size; j++)
      |         ^~~
ct-cbn.h:859:11: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
  859 |           if (! is_in)  // add to linear extension:
      |           ^~
ct-cbn.h: In function ‘hamming_distance’:
ct-cbn.h:956:3: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
  956 |   for(i=0; i<n; i++)
      |   ^~~
ct-cbn.h:963:5: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
  963 |     free(g);
      |     ^~~~
ct-cbn.h: In function ‘is_after’:
ct-cbn.h:1198:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 1198 |     for ( a=0; a<=M->n; a++ )
      |     ^~~
ct-cbn.h:1201:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 1201 |       return 1;
      |       ^~~~~~
ct-cbn.h: In function ‘is_strict_after’:
ct-cbn.h:1211:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 1211 |     for ( a=0; a<=M->n; a++ )
      |     ^~~
ct-cbn.h:1214:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 1214 |       return 1;
      |       ^~~~~~
ct-cbn.h: In function ‘compute_all_exp’:
ct-cbn.h:1283: warning: ignoring ‘#pragma omp parallel’ [-Wunknown-pragmas]
 1283 | #pragma omp parallel for private(i,c,k,j,g, all_pred_in_k, pred,l)
ct-cbn.h:1318:11: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 1318 |           for (l = 0; l < m; l++)
      |           ^~~
ct-cbn.h:1346:13: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 1346 |             Exp[pos][i] = censexp[pos][i][m-1];
      |             ^~~
ct-cbn.h: In function ‘EM_epsilon’:
ct-cbn.h:1440:7: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 1440 |       for(i = 1; i < m; i++)
      |       ^~~
ct-cbn.h:1447:9: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 1447 |         loglik_new += log (prob_tmp) * D[k].count;
      |         ^~~~~~~~~~
ct-cbn.h: In function ‘compute_loglik’:
ct-cbn.h:1471:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 1471 |     for(i = 1; i < m; i++)
      |     ^~~
ct-cbn.h:1477:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 1477 |       loglik[k] = log (prob_tmp) ;
      |       ^~~~~~
ct-cbn.h: In function ‘MLE’:
ct-cbn.h:1833:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 1833 |     for (k=0; k<N_u; k++)
      |     ^~~
ct-cbn.h:1839:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 1839 |       lambda[i] = (double) N / sum;
      |       ^~~~~~
ct-cbn.h: In function ‘EM’:
ct-cbn.h:1920:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 1920 |     for (k=0; k<N_u; k++)
      |     ^~~
ct-cbn.h:1939:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 1939 |       if (verbose)
      |       ^~
ct-cbn.h: In function ‘violation_map’:
ct-cbn.h:2488:3: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 2488 |   for (i=1; i<=n; i++)
      |   ^~~
ct-cbn.h:2502:5: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 2502 |     qsort(V, idx, sizeof(int *), compare_violation_pairs);  // small violators first
      |     ^~~~~
ct-cbn.h: In function ‘reduce_to_cover_relations’:
ct-cbn.h:2524:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 2524 |     for (j=1; j<=n; j++)
      |     ^~~
ct-cbn.h:2531:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 2531 |       while (empty(&q) == FALSE)
      |       ^~~~~
ct-cbn.h: In function ‘try_edge’:
ct-cbn.h:2741:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 2741 |     for(j=0;j<n*n;j++)
      |     ^~~
ct-cbn.h:2744:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 2744 |       R4[i] = c;
      |       ^~
ct-cbn.h:2784:13: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 2784 |             for(i=1;i<n+1;i++)
      |             ^~~
ct-cbn.h:2790:15: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 2790 |               if(c == 1)
      |               ^~
ct-cbn.h:2943:13: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 2943 |             for(i=1;i<n+1;i++)
      |             ^~~
ct-cbn.h:2949:15: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 2949 |               if(c == 1)
      |               ^~
ct-cbn.h:2721:17: warning: variable ‘alpha_new’ set but not used [-Wunused-but-set-variable]
 2721 |   double alpha, alpha_new;
      |                 ^~~~~~~~~
ct-cbn.h: In function ‘local_search’:
ct-cbn.h:3134:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 3134 |     for(j=1;j<=M->n;j++)
      |     ^~~
ct-cbn.h:3161:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 3161 |       print_double_matrix(loglik_next, M->n, M->n);
      |       ^~~~~~~~~~~~~~~~~~~
ct-cbn.h: In function ‘is_equal_int_matrix’:
ct-cbn.h:3196:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 3196 |     for (j=0; j<n; j++)
      |     ^~~
ct-cbn.h:3200:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 3200 |       return 1;
      |       ^~~~~~
ct-cbn.h: In function ‘ML_path’:
ct-cbn.h:3305:7: warning: variable ‘mut_next’ set but not used [-Wunused-but-set-variable]
 3305 |   int mut_next, index_next;
      |       ^~~~~~~~
ctcbn.c: In function ‘ctcbn_’:
ctcbn.c:88:7: warning: unused variable ‘c’ [-Wunused-variable]
   88 |   int c = 0;
      |       ^
ctcbn.c:84:7: warning: unused variable ‘GPS’ [-Wunused-variable]
   84 |   int GPS = 0;
      |       ^~~
ctcbn.c:79:7: warning: unused variable ‘verbose’ [-Wunused-variable]
   79 |   int verbose = 0;
      |       ^~~~~~~
ctcbn.c: In function ‘hcbn_’:
ctcbn.c:319:7: warning: unused variable ‘c’ [-Wunused-variable]
  319 |   int c = 0;
      |       ^
ctcbn.c:314:7: warning: variable ‘N_iter’ set but not used [-Wunused-but-set-variable]
  314 |   int N_iter = 0;
      |       ^~~~~~
ctcbn.c:313:10: warning: unused variable ‘T’ [-Wunused-variable]
  313 |   double T = REAL(temp)[0];
      |          ^
ctcbn.c:308:7: warning: unused variable ‘t_flag’ [-Wunused-variable]
  308 |   int t_flag = 1;
      |       ^~~~~~
ctcbn.c:306:7: warning: unused variable ‘l_flag’ [-Wunused-variable]
  306 |   int l_flag = 0;
      |       ^~~~~~
ctcbn.c:305:7: warning: unused variable ‘gps_flag’ [-Wunused-variable]
  305 |   int gps_flag = 0;
      |       ^~~~~~~~
ctcbn.c:304:7: warning: variable ‘e_flag’ set but not used [-Wunused-but-set-variable]
  304 |   int e_flag = 0;
      |       ^~~~~~
ctcbn.c:303:7: warning: unused variable ‘f_flag’ [-Wunused-variable]
  303 |   int f_flag = 0;
      |       ^~~~~~
ctcbn.c:302:7: warning: unused variable ‘error_flag’ [-Wunused-variable]
  302 |   int error_flag = 0;
      |       ^~~~~~~~~~
ctcbn.c:468:10: warning: ‘rOutput’ may be used uninitialized [-Wmaybe-uninitialized]
  468 |   return char_to_sexp(rOutput);
      |          ^~~~~~~~~~~~~~~~~~~~~
ctcbn.c:320:9: note: ‘rOutput’ was declared here
  320 |   char* rOutput;
      |         ^~~~~~~
/opt/ohpc/pub/compiler/gcc/14.2.0/bin/aarch64-unknown-linux-gnu-gcc -std=gnu23 -I"/home/biocbuild/R/R-4.5.0/include" -DNDEBUG -I/usr/include -I.  -I/usr/local/include    -fPIC  -g -O2  -Wall -Werror=format-security -c init.c -o init.o
/opt/ohpc/pub/compiler/gcc/14.2.0/bin/aarch64-unknown-linux-gnu-gcc -std=gnu23 -I"/home/biocbuild/R/R-4.5.0/include" -DNDEBUG -I/usr/include -I.  -I/usr/local/include    -fPIC  -g -O2  -Wall -Werror=format-security -c queue.c -o queue.o
/opt/ohpc/pub/compiler/gcc/14.2.0/bin/aarch64-unknown-linux-gnu-gcc -std=gnu23 -shared -L/home/biocbuild/R/R-4.5.0/lib -L/usr/local/lib -o CBN2Path.so bcbn.o ctcbn.o init.o queue.o -L/usr/lib64 -lgsl -lgslcblas -lm -L/home/biocbuild/R/R-4.5.0/lib -lR
installing to /home/biocbuild/R/R-4.5.0/site-library/00LOCK-CBN2Path/00new/CBN2Path/libs
** R
** inst
** byte-compile and prepare package for lazy loading
** help
*** installing help indices
** building package indices
** installing vignettes
** testing if installed package can be loaded from temporary location
** checking absolute paths in shared objects and dynamic libraries
** testing if installed package can be loaded from final location
** testing if installed package keeps a record of temporary installation path
* DONE (CBN2Path)

R version 4.5.0 (2025-04-11) -- "How About a Twenty-Six"
Copyright (C) 2025 The R Foundation for Statistical Computing
Platform: aarch64-unknown-linux-gnu

R is free software and comes with ABSOLUTELY NO WARRANTY.
You are welcome to redistribute it under certain conditions.
Type 'license()' or 'licence()' for distribution details.

R is a collaborative project with many contributors.
Type 'contributors()' for more information and
'citation()' on how to cite R or R packages in publications.

Type 'demo()' for some demos, 'help()' for on-line help, or
'help.start()' for an HTML browser interface to help.
Type 'q()' to quit R.

> # This file is part of the standard setup for testthat.
> # It is recommended that you do not modify it.
> #
> # Where should you do additional test configuration?
> # Learn more about the roles of various files in:
> # * https://r-pkgs.org/testing-design.html#sec-tests-files-overview
> # * https://testthat.r-lib.org/articles/special-files.html
> 
> library(testthat)
> library(CBN2Path)
> 
> test_check("CBN2Path")
chain: 1
0
chain: 2
0
chain: 3
0
chain: 4
0
       V1               V2                 V3                  V4         
 Min.   :0.1814   Min.   :0.007509   Min.   :0.0000229   Min.   :0.02232  
 1st Qu.:0.8077   1st Qu.:0.473096   1st Qu.:0.2640654   1st Qu.:0.09139  
 Median :0.8996   Median :0.609141   Median :0.4320635   Median :0.11811  
 Mean   :0.8665   Mean   :0.603820   Mean   :0.4456181   Mean   :0.12126  
 3rd Qu.:0.9569   3rd Qu.:0.741787   3rd Qu.:0.6123647   3rd Qu.:0.14732  
 Max.   :1.0000   Max.   :0.999870   Max.   :0.9999221   Max.   :0.30870  
       V5         
 Min.   :-12.806  
 1st Qu.: -7.836  
 Median : -7.401  
 Mean   : -7.512  
 3rd Qu.: -7.066  
 Max.   : -6.542  
       V1                V2                V3                  V4         
 Min.   :0.03264   Min.   :0.01234   Min.   :0.0001176   Min.   :0.01648  
 1st Qu.:0.80811   1st Qu.:0.47235   1st Qu.:0.2734272   1st Qu.:0.09109  
 Median :0.89808   Median :0.60604   Median :0.4409152   Median :0.11550  
 Mean   :0.86579   Mean   :0.60216   Mean   :0.4547628   Mean   :0.12029  
 3rd Qu.:0.95723   3rd Qu.:0.73678   3rd Qu.:0.6240147   3rd Qu.:0.14563  
 Max.   :0.99998   Max.   :0.99972   Max.   :0.9999353   Max.   :0.30097  
       V5         
 Min.   :-12.541  
 1st Qu.: -7.818  
 Median : -7.393  
 Mean   : -7.501  
 3rd Qu.: -7.059  
 Max.   : -6.533  
       V1               V2                 V3                  V4        
 Min.   :0.2596   Min.   :0.007814   Min.   :0.0001307   Min.   :0.0227  
 1st Qu.:0.8122   1st Qu.:0.476262   1st Qu.:0.2635996   1st Qu.:0.0908  
 Median :0.8977   Median :0.609140   Median :0.4310865   Median :0.1170  
 Mean   :0.8686   Mean   :0.604798   Mean   :0.4451180   Mean   :0.1200  
 3rd Qu.:0.9552   3rd Qu.:0.738529   3rd Qu.:0.6138659   3rd Qu.:0.1436  
 Max.   :1.0000   Max.   :0.999844   Max.   :0.9996195   Max.   :0.3513  
       V5         
 Min.   :-11.891  
 1st Qu.: -7.815  
 Median : -7.395  
 Mean   : -7.503  
 3rd Qu.: -7.062  
 Max.   : -6.536  
       V1                V2                  V3                  V4         
 Min.   :0.01454   Min.   :0.0001773   Min.   :0.0001033   Min.   :0.01786  
 1st Qu.:0.80472   1st Qu.:0.4712821   1st Qu.:0.2668351   1st Qu.:0.09243  
 Median :0.89852   Median :0.6075131   Median :0.4347643   Median :0.11852  
 Mean   :0.86495   Mean   :0.6022320   Mean   :0.4503832   Mean   :0.12168  
 3rd Qu.:0.95564   3rd Qu.:0.7380748   3rd Qu.:0.6192328   3rd Qu.:0.14696  
 Max.   :0.99999   Max.   :0.9996180   Max.   :0.9994796   Max.   :0.34206  
       V5         
 Min.   :-12.944  
 1st Qu.: -7.841  
 Median : -7.410  
 Mean   : -7.517  
 3rd Qu.: -7.072  
 Max.   : -6.534  
[1] "Criterion: 1.00053591099512"
Potential scale reduction factors:

     Point est. Upper C.I.
[1,]          1          1
[2,]          1          1
[3,]          1          1
[4,]          1          1
[5,]          1          1

Multivariate psrf

1
[1] "##########################################"
[ FAIL 0 | WARN 2 | SKIP 0 | PASS 9 ]

[ FAIL 0 | WARN 2 | SKIP 0 | PASS 9 ]
> 
> proc.time()
   user  system elapsed 
151.710   0.815 152.853