{{Title|
title=ProxyBOX
}}
{{Header}}
{{#seo:
|description=sys-proxy
|image=Proxybox123.jpg
}}
[[File:Proxybox123.jpg|thumb]]
{{intro|
sys-proxy
}}
Developed for and tested in Qubes Debian / {{kicksecure}} only.
= Introduction =
TODO: write introduction

{{Tunnels_Introduction}}

This is for advanced users only!

Advantage: IP forwarding not required

For background information, see also: [[Dev/Inspiration#Proxy]]

= Setup =
== Template ==
{{Install Package|package=
redsocks
}}

== VM Setup ==
'''1.''' Create a VM <code>sys-proxy</code> with checked <code>provides network</code> based on Debian {{Stable project version based on Debian version short}} Template.

'''2.''' Create a VM <code>anon-proxy</code> which uses <code>net qube</code>: <code>sys-proxy</code>.

== sys-proxy Setup ==
=== redsocks Configuration ===
In <code>sys-proxy</code>.

file: <code>~/redsocks.conf</code>

<pre>
base {
	// debug: connection progress & client list on SIGUSR1
	log_debug = off;

	// info: start and end of client session
	log_info = on;

	/* possible `log' values are:
	 *   stderr
	 *   "file:/path/to/file"
	 *   syslog:FACILITY  facility is any of "daemon", "local0"..."local7"
	 */
	log = "syslog:daemon";

	// detach from console
	daemon = on;

	/* Change uid, gid and root directory, these options require root
	 * privilegies on startup.
	 * Note, your chroot may requre /etc/localtime if you write log to syslog.
	 * Log is opened before chroot & uid changing.
	 */
	user = redsocks;
	group = redsocks;
	// chroot = "/var/chroot";

	/* possible `redirector' values are:
	 *   iptables   - for Linux
	 *   ipf        - for FreeBSD
	 *   pf         - for OpenBSD
	 *   generic    - some generic redirector that MAY work
	 */
	redirector = iptables;
}

redsocks {
	/* `local_ip' defaults to 127.0.0.1 for security reasons,
	 * use 0.0.0.0 if you want to listen on every interface.
	 * `local_*' are used as port to redirect to.
	 */
	// local_ip = 127.0.0.1;
	local_ip = 0.0.0.0;
	local_port = 12345;

	// `ip' and `port' are IP and tcp-port of proxy-server
	// You can also use hostname instead of IP, only one (random)
	// address of multihomed host will be used.
	ip = 127.0.0.1;
	port = 9050;
	// known types: socks4, socks5, http-connect, http-relay
	type = socks5;
	// login = "username";
	// password = "password";
}

redudp {
	// `local_ip' should not be 0.0.0.0 as it's also used for outgoing
	// packets that are sent as replies - and it should be fixed
	// if we want NAT to work properly.
	// local_ip = 127.0.0.1;
	local_ip = 0.0.0.0;
	local_port = 10053;

	// `ip' and `port' of socks5 proxy server.
	ip = 127.0.0.1;
	port = 9050;
	// login = "username";
	// password = "password";

	// kernel does not give us this information, so we have to duplicate it
	// in both iptables rules and configuration file.  By the way, you can
	// set `local_ip' to 127.45.67.89 if you need more than 65535 ports to
	// forward ;-)
	// This limitation may be relaxed in future versions using contrack-tools.
	dest_ip = 192.0.2.2;
	dest_port = 53;

	udp_timeout = 30;
	udp_timeout_stream = 180;
}

dnstc {
	// fake and really dumb DNS server that returns "truncated answer" to
	// every query via UDP, RFC-compliant resolver should repeat same query
	// via TCP in this case.
	// local_ip = 127.0.0.1;
	local_ip = 0.0.0.0;
	local_port = 5300;
}

// you can add more `redsocks' and `redudp' sections if you need.
</pre>

=== Script ===
In <code>sys-proxy</code>.

file: <code>~/firewall</code>

<pre>
#!/bin/bash

set -x
set -e

sysctl -w net.ipv6.conf.all.disable_ipv6=1
sysctl -w net.ipv4.conf.all.forwarding=0

ls /home/user/redsocks.conf /etc/redsocks.conf
cp /home/user/redsocks.conf /etc/redsocks.conf
systemctl --no-pager --full restart redsocks
systemctl --no-pager --full status redsocks

echo "options use-vc
nameserver 1.1.1.1" | tee /etc/resolv.conf

[ -n "$iptables_cmd" ] || iptables_cmd="iptables --wait"
[ -n "$ip6tables_cmd" ] || ip6tables_cmd="ip6tables --wait"

$iptables_cmd -P INPUT DROP
$iptables_cmd -P FORWARD DROP
$iptables_cmd -P OUTPUT DROP

## Flush old rules.
$iptables_cmd -F
$iptables_cmd -X
$iptables_cmd -t nat -F
$iptables_cmd -t nat -X
$iptables_cmd -t mangle -F
$iptables_cmd -t mangle -X

## Allow unlimited traffic on the loopback interface.
$iptables_cmd -A INPUT -i lo -j ACCEPT
$iptables_cmd -A OUTPUT -o lo -j ACCEPT
$iptables_cmd -A OUTPUT --dst 127.0.0.1 -j ACCEPT

## Established incoming connections are accepted.
$iptables_cmd -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT

## Established outgoing connections are accepted.
$iptables_cmd -A OUTPUT -m state --state RELATED,ESTABLISHED -j ACCEPT

#$iptables_cmd -A OUTPUT --dst 1.1.1.1 -p udp --dport 53 -j ACCEPT
#$iptables_cmd -A OUTPUT --dst 1.1.1.1 -p tcp --dport 53 -j ACCEPT

$iptables_cmd -t nat -A OUTPUT --dst 127.0.0.1 -p udp --dport 53 -j ACCEPT
$iptables_cmd -t nat -A OUTPUT --dst 127.0.0.1 -p tcp --dport 53 -j ACCEPT

## redsocks must be allowed to establish direct connections.
$iptables_cmd -A OUTPUT -j ACCEPT -m owner --uid-owner redsocks
$iptables_cmd -t nat -A OUTPUT -j ACCEPT -m owner --uid-owner redsocks

## Used Tor in absence of a stable proxy for testing purposes.
#$iptables_cmd -A OUTPUT -j ACCEPT -m owner --uid-owner debian-tor
#$iptables_cmd -t nat -A OUTPUT -j ACCEPT -m owner --uid-owner debian-tor

## redsocks dnstc
$iptables_cmd -t nat -A OUTPUT -p udp --dport 53 -j REDIRECT --to-port 5300

## redsocks redudp
$iptables_cmd -t nat -A OUTPUT -p udp -j REDIRECT --to-port 10053

## redsocks redsocks
$iptables_cmd -t nat -A OUTPUT -p tcp -j REDIRECT --to-port 12345

$iptables_cmd -A INPUT -i vif+ -j ACCEPT

## Best not interering with DNS resolution from anon-proxy VM.
## redsocks dnstc
## This fixes "nslookup google.com" when the "proxy is Tor".
#$iptables_cmd -t nat -A PREROUTING -i vif+ -p udp --dport 53 -j REDIRECT --to-ports 5300
## redsocks redudp
#$iptables_cmd -t nat -A PREROUTING -i vif+ -p udp -j REDIRECT --to-ports 10053
## Would it make sense to set up a DNS server in sys-proxy?
#$iptables_cmd -t nat -A PREROUTING -i vif+ -p tcp --dport 53 -j REDIRECT --to-ports 53

## redsocks redsocks
$iptables_cmd -t nat -A PREROUTING -i vif+ -p tcp --syn -j REDIRECT --to-ports 12345

## Log blocked traffic for debugging.
$iptables_cmd -A INPUT -j LOG --log-level 4 --log-prefix "iptables blocked input: "
$iptables_cmd -A OUTPUT -j LOG --log-level 4 --log-prefix "iptables blocked output: "
$iptables_cmd -A FORWARD -j LOG --log-level 4 --log-prefix "iptables blocked forward: "

## Reject all other traffic.
$iptables_cmd -A OUTPUT -j REJECT

cat /etc/resolv.conf
</pre>

{{CodeSelect|code=
chmod +x ~/firewall
}}

=== Start ===

In <code>sys-proxy</code>.

{{CodeSelect|code=
sudo ~/firewall
}}

== anon-proxy VM setup ==
In <code>anon-proxy</code> VM.

{{Open with root rights|filename=
/etc/resolv.conf
}}

Public DNS server. Warning: this example uses cloudflare.

{{CodeSelect|code=
options use-vc
nameserver 1.1.1.1
## alternative: Google
#nameserver 8.8.8.8
}}

= Tests =

TCP test:

{{CodeSelect|code=
curl -H 'Host: check.torproject.org' -k https://{{Check.torproject.org IP}}/api/ip
}}

TCP + DNS test:

{{CodeSelect|code=
curl https://check.torproject.org/api/ip
}}

DNS test:

{{CodeSelect|code=
nslookup check.torproject.org
}}

= Leak Testing =
When running <code>sudo systemctl stop tor</code> in <code>sys-proxy</code>, TCP test, TCP + DNS test, as well as DNS test will be dysfuctional.

= Footnotes =
{{reflist|close=1}}

{{Footer}}

[[Category:Documentation]]