# packages

pkgId: 502c4510076dcd7d9b8ade91bbf8e76fd90b291e512a2c8e2fbf63acf0b403bc
name: nvme-snsd
arch: riscv64
version: 1.00.029
epoch: 0
release: 4.oe2503
summary: nvme-snsd service
url: https://gitee.com/openeuler/nvme-snsd
rpm_license: BSD 3-Clause
rpm_group: Applications/System
rpm_buildhost: 951db00d014f
rpm_sourcerpm: nvme-snsd-1.00.029-4.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/nvme-snsd-1.00.029-4.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This is an independently deployable software that can simplify service deployment and configuration while reducing the impact of link failures on services .
  When the storage device goes online, NVMe over Fabric target association/connection will be automatically created. Once a path between the host and the storage
  is not reachable/offline, the device can detect the path change in time and switch the current fault path service to another to reduce the service downtime.


pkgId: 6a57c19bb44c9310a7b6f5f6f169cb68eefe97ccb3125040dae3bea6f080edc7
name: nvmetcli
arch: noarch
version: 0.8
epoch: 0
release: 1.oe2503
summary: A command line interface for the kernel NVMe nvmet
url: ftp://ftp.infradead.org/pub/nvmetcli/
rpm_license: ASL 2.0
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: nvmetcli-0.8-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/nvmetcli-0.8-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  nvmetcli is a program used for viewing, editing, saving,
  and starting a Linux kernel NVMe Target, used for an NVMe-over-Fabrics
  network configuration.  It allows an administrator to export
  a storage resource (such as NVMe devices, files, and volumes)
  to a local block device and expose them to remote systems
  based on the NVMe-over-Fabrics specification from http://www.nvmexpress.org.


pkgId: ff4a23526d85224aebdd1f3a2b1bacfed76c3701d59f43311048895f1a53d6cc
name: objectweb-asm
arch: noarch
version: 8.0.1
epoch: 0
release: 1.oe2503
summary: Java bytecode manipulation and analysis framework
url: http://asm.ow2.org/
rpm_license: BSD
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: objectweb-asm-8.0.1-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/objectweb-asm-8.0.1-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  ASM is an all purpose Java bytecode manipulation and analysis
  framework.  It can be used to modify existing classes or dynamically
  generate classes, directly in binary form.  Provided common
  transformations and analysis algorithms allow to easily assemble
  custom complex transformations and code analysis tools.


pkgId: 59c8aee4bf4cf7158fd684f60b968403acca7e309a3daeb08cb6e8993329358f
name: objectweb-asm3
arch: noarch
version: 3.3.1
epoch: 0
release: 22.oe2503
summary: A bytecode manipulation framework for Java
url: http://asm.ow2.org/
rpm_license: BSD-3-Clause and Apache-2.0
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: objectweb-asm3-3.3.1-22.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/objectweb-asm3-3.3.1-22.oe2503.noarch.rpm
checksum_type: sha256
description:
  ASM is a general Java bytecode manipulation and analysis framework. It can be used directly in
  binary form to modify existing classes or dynamically generate classes. Provides universal
  transformation and analysis algorithms to easily assemble custom complex transformation and
  code analysis tools.


pkgId: be088a8c1eba1f656c01bf1f64e3c7fbe117da8746b4722d565bd6af9a3976ee
name: objenesis
arch: noarch
version: 2.6
epoch: 0
release: 4.oe2503
summary: A Java library to instantiate a new object
url: http://objenesis.org/
rpm_license: ASL 2.0
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: objenesis-2.6-4.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/objenesis-2.6-4.oe2503.noarch.rpm
checksum_type: sha256
description:
  Objenesis is a small Java library that serves one purpose:
  * To instantiate a new object of a particular class.
  Java already supports this dynamic instantiation of classes using Class.newInstance(). However,
  this only works if the class has an appropriate constructor. There are many times when a class
  cannot be instantiated this way, such as when the class contains:
  * Constructors that require arguments.
  * Constructors that have side effects.
  * Constructors that throw exceptions.
  As a result, it is common to see restrictions in libraries stating that classes must require a
  default constructor. Objenesis aims to overcome these restrictions by bypassing the constructor
  on object instantiation.


pkgId: d14106d51b3f2c667d7845f390899b9da935826d7041aa39ff6957dd1f0f313f
name: obs-api-deps
arch: riscv64
version: 2.10.15
epoch: 0
release: 11.oe2503
summary: Holding dependencies required to run the OBS frontend
url: http://www.openbuildservice.org
rpm_license: GPL-2.0-only OR GPL-3.0-only
rpm_group: Unspecified
rpm_buildhost: 8fd1b1f38d24
rpm_sourcerpm: obs-bundled-gems-2.10.15-11.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/obs-api-deps-2.10.15-11.oe2503.riscv64.rpm
checksum_type: sha256
description:
  To simplify splitting the test suite packages off the main package,
  this package is just a meta package used to run and build obs-api


pkgId: 9e760283e15fd870ae2e2be037ec6995d6504c6fa794fdd86cbfde80c3ac4134
name: obs-api-testsuite-deps
arch: riscv64
version: 2.10.15
epoch: 0
release: 11.oe2503
summary: Holding dependencies required to run frontend test suites
url: http://www.openbuildservice.org
rpm_license: GPL-2.0-only OR GPL-3.0-only
rpm_group: Productivity/Networking/Web/Utilities
rpm_buildhost: 8fd1b1f38d24
rpm_sourcerpm: obs-bundled-gems-2.10.15-11.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/obs-api-testsuite-deps-2.10.15-11.oe2503.riscv64.rpm
checksum_type: sha256
description:
  To simplify splitting the test suite packages off the main package,
  this package is just a meta package used to build obs-api testsuite


pkgId: a5b8f0959cd4f90d9bcc08f4ae9f50955c6fd92340fc211623cdf8de652350d3
name: obs-bundled-gems
arch: riscv64
version: 2.10.15
epoch: 0
release: 11.oe2503
summary: The Open Build Service -- Bundled Gems
url: http://www.openbuildservice.org
rpm_license: GPL-2.0-only OR GPL-3.0-only
rpm_group: Unspecified
rpm_buildhost: 8fd1b1f38d24
rpm_sourcerpm: obs-bundled-gems-2.10.15-11.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/obs-bundled-gems-2.10.15-11.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package is useful for the Open Build Service. It will figure out
  denpendent gems, and add them to spec file.


pkgId: d1b66c87a2df3790374659bd3f554d82e2dd3c367e03efe7a9354e2819fb0942
name: obs-server
arch: noarch
version: 2.10.15
epoch: 0
release: 14.oe2503
summary: The Open Build Service -- Server Component
url: http://www.openbuildservice.org
rpm_license: GPL-2.0-only OR GPL-3.0-only
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: obs-server-2.10.15-14.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/obs-server-2.10.15-14.oe2503.noarch.rpm
checksum_type: sha256
description:
  The Open Build Service (OBS) backend is used to store all sources and binaries.
  It also calculates the need for new build jobs and distributes it.


pkgId: 7116149a0ca633de645e6d86f76547feef8bd7cb97c901a4bf53da52866e4aad
name: obs-service-download_files
arch: noarch
version: 0.9.2
epoch: 0
release: 1.oe2503
summary: An OBS source service: download files
url: https://github.com/openSUSE/obs-service-download_files
rpm_license: GPLv2+
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-11
rpm_sourcerpm: obs-service-download_files-0.9.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/obs-service-download_files-0.9.2-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  This is a source service for openEuler Build Service.
  This service downloads all source files and parses all
  spec files needed for building.


pkgId: eb7e9b96f29ee792ecf1c8a056cc46a85b5268bc61ca203f60cccef096683e4e
name: ocaml
arch: riscv64
version: 4.14.1
epoch: 0
release: 3.oe2503
summary: OCaml compiler and programming environment
url: http://www.ocaml.org
rpm_license: LGPL-2.1-only
rpm_group: Unspecified
rpm_buildhost: c8fa9ec93bed
rpm_sourcerpm: ocaml-4.14.1-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/ocaml-4.14.1-3.oe2503.riscv64.rpm
checksum_type: sha256
description:
  OCaml is a high-level, strongly-typed, functional and object-oriented
  programming language from the ML family of languages. This package
  includes runtime environment, X11 support ,Documentation generator
  and emacs.


pkgId: 4a9c33b5d46f6b6a7caf0b596bd1ae96c562c04c56f7eb333b153b3b95439e05
name: ocaml-augeas
arch: riscv64
version: 0.6
epoch: 0
release: 1.oe2503
summary: OCaml bindings for Augeas configuration API
url: https://people.redhat.com/~rjones/augeas/files/
rpm_license: LGPL-2.1-or-later WITH OCaml-LGPL-linking-exception
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: ocaml-augeas-0.6-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/ocaml-augeas-0.6-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Augeas is a unified system for editing arbitrary configuration
  files. This provides complete OCaml bindings for Augeas.


pkgId: 0bdc25335599e177ddc4321ad51ef065daca1c6b56d69c9bdde03ec3f06da66b
name: ocaml-augeas-devel
arch: riscv64
version: 0.6
epoch: 0
release: 1.oe2503
summary: Development files for ocaml-augeas
url: https://people.redhat.com/~rjones/augeas/files/
rpm_license: LGPL-2.1-or-later WITH OCaml-LGPL-linking-exception
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: ocaml-augeas-0.6-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/ocaml-augeas-devel-0.6-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The ocaml-augeas-devel package contains libraries and signature files for
  developing applications that use ocaml-augeas.


pkgId: dd254a481c98db8d7953a51abbb4c2918f65ca89eeb29df73bb7bd1606258b38
name: ocaml-calendar
arch: riscv64
version: 2.04
epoch: 0
release: 19.oe2503
summary: An Objective Caml library for handling dates and times
url: http://calendar.forge.ocamlcore.org/
rpm_license: LGPLv2
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: ocaml-calendar-2.04-19.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/ocaml-calendar-2.04-19.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The Calendar Library (Calendar for short) is an Objective Caml library for handling dates and times
  in your program.

  Calendar mainly implements 3 datatypes:
  Date: year/month/day with support for under-specified dates "year/month" or "year" only and support
  for Gregorian and Julian calendar
  Time: hour/minute/second with support for time zones
  Calendar: Date + Time

  Seconds can be either integers or floats (different implementations are provided). The library also
  comes with:
  Printers and parsers
  Period: an interval between two dates or two times or two calendars


pkgId: eb1eb6716a48f91b49a4904ee09181581c65ecd8e12bd4fbc4015b0b9216e8b1
name: ocaml-calendar-devel
arch: riscv64
version: 2.04
epoch: 0
release: 19.oe2503
summary: Development documents for ocaml-calendar
url: http://calendar.forge.ocamlcore.org/
rpm_license: LGPLv2
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: ocaml-calendar-2.04-19.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/ocaml-calendar-devel-2.04-19.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The package provides libraries and some other development documents for developing applications
  that use ocaml-calendar.


pkgId: 33e146813ded2700f5f8a0479919677e104fd28825a5c12d64dd6290ccba86bb
name: ocaml-camlp4
arch: riscv64
version: 4.14.1
epoch: 0
release: 2.oe2503
summary: Pre-Processor for OCaml
url: https://github.com/ocaml/camlp4
rpm_license: LGPLv2+ with exceptions
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: ocaml-camlp4-4.14.1-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/ocaml-camlp4-4.14.1-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Camlp4 is a Pre-Processor-Pretty-Printer for OCaml, used to parse the
  source file and print some results on the standard output.

  This package contains runtime files.


pkgId: 8d96b78b709aa181dc1e51dcb905ed07c3281370a8532dd7962ed2375564bdef
name: ocaml-cppo
arch: riscv64
version: 1.6.9
epoch: 0
release: 1.oe2503
summary: An equivalent of the C preprocessor for OCaml programs
url: https://github.com/ocaml-community/cppo
rpm_license: BSD
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: ocaml-cppo-1.6.9-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/ocaml-cppo-1.6.9-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Cppo is an equivalent of the C preprocessor for OCaml programs.It allows the definition of simple macros and file inclusion.


pkgId: bc5a41b556c0b8fbac75696088b328505f6cb5a6c2f47e6aff640eaa29e1fd58
name: ocaml-csexp
arch: riscv64
version: 1.5.2
epoch: 0
release: 1.oe2503
summary: Parsing and printing of S-expressions in canonical form
url: https://github.com/ocaml-dune/csexp
rpm_license: MIT
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: ocaml-csexp-1.5.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/ocaml-csexp-1.5.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This project provides minimal support for parsing and printing
  S-expressions in canonical form, which is a very simple and canonical
  binary encoding of S-expressions.


pkgId: d2ffdd94f7e8492df85c4d5873d913727108d0e64c2556a43c2003d6b54e1471
name: ocaml-csexp-devel
arch: riscv64
version: 1.5.2
epoch: 0
release: 1.oe2503
summary: Development files for ocaml-csexp
url: https://github.com/ocaml-dune/csexp
rpm_license: MIT
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: ocaml-csexp-1.5.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/ocaml-csexp-devel-1.5.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The ocaml-csexp-devel package contains libraries and signature files for
  developing applications that use ocaml-csexp.


pkgId: 9e999a1b2b2a8b5204303780bab0cca724e8ab58a1ab9f914c475cf7b78bdd7c
name: ocaml-csv
arch: riscv64
version: 1.7
epoch: 0
release: 6.oe2503
summary: A pure OCaml library to read and write CSV files
url: https://github.com/Chris00/ocaml-csv/
rpm_license: LGPLv2+
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: stl-iscas-9950x
rpm_sourcerpm: ocaml-csv-1.7-6.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/ocaml-csv-1.7-6.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The comma-separated values format -- or CSV for short -- is a simple tabular format supported by
  all major spreadsheets. This library implements pure OCaml functions to read and write files in
  this format (including Excel extensions) as well as some convenience functions to manipulate such
  data.


pkgId: aec7b413a85edef557d896374864ce02d051973644fce6dc0e45f93f8588030c
name: ocaml-csv-devel
arch: riscv64
version: 1.7
epoch: 0
release: 6.oe2503
summary: Development documents for ocaml-csv
url: https://github.com/Chris00/ocaml-csv/
rpm_license: LGPLv2+
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: stl-iscas-9950x
rpm_sourcerpm: ocaml-csv-1.7-6.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/ocaml-csv-devel-1.7-6.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The package provides libraries and some other development documents for developing applications
  that use ocaml-csv.


pkgId: af92bb2ae782cc179abb6a78d356c523a13150b15e32281c794537f4c969b4e8
name: ocaml-curses-devel
arch: riscv64
version: 1.0.11
epoch: 0
release: 1.oe2503
summary: Development files for the ocaml-curses library
url: https://github.com/mbacarella/curses
rpm_license: LGPLv2+
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: ocaml-curses-1.0.11-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/ocaml-curses-devel-1.0.11-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The ocaml-curses-devel package includes header files and libraries necessary
  for the ocaml-curses library.


pkgId: a4d10a5fde85ea5ec9bba3eaf9203218e1312dff2225d149f360a1676e65f173
name: ocaml-devel
arch: riscv64
version: 4.14.1
epoch: 0
release: 3.oe2503
summary: Development files for ocaml
url: http://www.ocaml.org
rpm_license: LGPL-2.1-only
rpm_group: Unspecified
rpm_buildhost: c8fa9ec93bed
rpm_sourcerpm: ocaml-4.14.1-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/ocaml-devel-4.14.1-3.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Development file for ocaml, includes source code for OCaml libraries
  and compiler-libs for development of some OCaml applications.


pkgId: 9de57b5c149fabc9917673f20691390397a594344a82171d36aa099fee2928b5
name: ocaml-dune
arch: riscv64
version: 2.9.1
epoch: 0
release: 2.oe2503
summary: A composable build system for OCaml
url: https://dune.build
rpm_license: MIT and LGPLv2 and LGPLv2 with exceptions and ISC
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: ocaml-dune-2.9.1-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/ocaml-dune-2.9.1-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Dune is a build system designed for OCaml/Reason projects only. It focuses
  on providing the user with a consistent experience and takes care of most of
  the low-level details of OCaml compilation. All you have to do is provide a
  description of your project and Dune will do the rest.

  The scheme it implements is inspired from the one used inside Jane Street and
  adapted to the open source world. It has matured over a long time and is used
  daily by hundred of developers, which means that it is highly tested and
  productive.


pkgId: 2310a2e1ce48c2012e9422f3e33641f4327f6b283765f442160798b4186c9543
name: ocaml-dune-devel
arch: riscv64
version: 2.9.1
epoch: 0
release: 2.oe2503
summary: Development files for ocaml-dune
url: https://dune.build
rpm_license: MIT and LGPLv2 and LGPLv2 with exceptions and ISC
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: ocaml-dune-2.9.1-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/ocaml-dune-devel-2.9.1-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The ocaml-dune-devel package contains libraries and
  signature files for developing applications that use ocaml-dune.


pkgId: 3544de3bf4dd9d8543289896991d275020257fcf8fe465f32e947cd87eeb924d
name: ocaml-dune-emacs
arch: noarch
version: 2.9.1
epoch: 0
release: 2.oe2503
summary: Emacs support for ocaml-dune
url: https://dune.build
rpm_license: ISC
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: ocaml-dune-2.9.1-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/ocaml-dune-emacs-2.9.1-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  The ocaml-dune-devel package contains Emacs integration with the dune build
  system, a mode to edit dune files, and flymake support for dune files.


pkgId: 8a308f551510cb0cfe83cb1a10b77c3952878fccc6427e2fae755d8b4378ee3b
name: ocaml-extlib
arch: riscv64
version: 1.7.9
epoch: 0
release: 1.oe2503
summary: A set of additional useful functions and modules for OCaml
url: https://github.com/ygrek/ocaml-extlib
rpm_license: LGPLv2+ with exceptions
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-02
rpm_sourcerpm: ocaml-extlib-1.7.9-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/ocaml-extlib-1.7.9-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  A complete yet small extension for OCaml standard library (reduced, recommended)

  The purpose of this library is to add new functions to OCaml standard library modules, to modify
  some functions in order to get better performances or safety (tail-recursive) and also to provide
  new modules which should be useful for day to day programming.


pkgId: 0673c686f2ab092cb3bc977b2a8ad2b0308c836710c6ff8208e9909aad072842
name: ocaml-extlib-devel
arch: riscv64
version: 1.7.9
epoch: 0
release: 1.oe2503
summary: Development documents for ocaml-extlib
url: https://github.com/ygrek/ocaml-extlib
rpm_license: LGPLv2+ with exceptions
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-02
rpm_sourcerpm: ocaml-extlib-1.7.9-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/ocaml-extlib-devel-1.7.9-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The package provides libraries and some other development documents for developing applications
  that use ocaml-extlib.


pkgId: a68dcaba07f207ae4060daf485caf25b7c080ec57b67cd997b3f03be072420f9
name: ocaml-fileutils
arch: riscv64
version: 0.6.4
epoch: 0
release: 1.oe2503
summary: API to manipulate files (POSIX like) and filenames
url: https://github.com/gildor478/ocaml-fileutils
rpm_license: LGPLv2 with exceptions
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: ocaml-fileutils-0.6.4-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/ocaml-fileutils-0.6.4-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This library provides an API to perform POSIX like operations on files like:
    mv
    cp
    rm
    mkdir
    touch
    which...

  It also providesa module to manipulate abstract filenames:
    classification
    make_relative: made a filename relative to another
    make_absolute


pkgId: e5df989ecccb1595c02319cd22a8241aa46457c3d198145b4da2d1e8322e34e8
name: ocaml-fileutils-devel
arch: riscv64
version: 0.6.4
epoch: 0
release: 1.oe2503
summary: Development documents for ocaml-fileutils
url: https://github.com/gildor478/ocaml-fileutils
rpm_license: LGPLv2 with exceptions
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: ocaml-fileutils-0.6.4-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/ocaml-fileutils-devel-0.6.4-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The package provides libraries and some other development documents for developing applications
  that use ocaml-fileutils.


pkgId: d7ca36b9105ca44d9b02e6ac8a7578c23373cf819a5cabeaf765be87639685b1
name: ocaml-findlib
arch: riscv64
version: 1.9.8
epoch: 0
release: 1.oe2503
summary: OCaml library manager
url: https://projects.camlcity.org/projects/findlib.html
rpm_license: MIT
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: ocaml-findlib-1.9.8-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/ocaml-findlib-1.9.8-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Findlib is a library manager for Objective Caml. It provides a convention how to store libraries,
  and a file format ("META") to describe the properties of libraries. There is also a tool (ocamlfind)
  for interpreting the META files, so that it is very easy to use libraries in programs and scripts.


pkgId: 88209dbb68bff862c702a125bf3bb5f55670c67b4808eae902e79ed8a0ab3a67
name: ocaml-findlib-devel
arch: riscv64
version: 1.9.8
epoch: 0
release: 1.oe2503
summary: Development documents for ocaml-findlib
url: https://projects.camlcity.org/projects/findlib.html
rpm_license: MIT
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: ocaml-findlib-1.9.8-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/ocaml-findlib-devel-1.9.8-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The package provides libraries and some other development documents for developing applications
  that use ocaml-findlib.


pkgId: 76e34275496c82f53e7e62c4989088dc07b99c9ceebf41930564a4f76ad8a38e
name: ocaml-hivex
arch: riscv64
version: 1.3.23
epoch: 0
release: 1.oe2503
summary: OCaml bindings for hivex
url: http://libguestfs.org/
rpm_license: LGPLv2
rpm_group: Unspecified
rpm_buildhost: 0154261ea4e7
rpm_sourcerpm: hivex-1.3.23-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/ocaml-hivex-1.3.23-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  ocaml-hivex contains OCaml bindings for hivex.

  This is for toplevel and scripting access only.  To compile OCaml
  programs which use hivex you will also need ocaml-hivex-devel.


pkgId: f2bcd5f6d402a8b9ddf800b9fafa8196380fbb4e4274349e420178c85ce875c8
name: ocaml-labltk
arch: riscv64
version: 8.06.14
epoch: 0
release: 1.oe2503
summary: Tcl/Tk interface for OCaml
url: https://github.com/garrigue/labltk
rpm_license: LGPLv2+ with exceptions
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-10
rpm_sourcerpm: ocaml-labltk-8.06.14-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/ocaml-labltk-8.06.14-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  labltk or mlTk is a library for interfacing OCaml with the scripting
  language Tcl/Tk (all versions since 8.0.3, but no betas).


pkgId: 9ac16ed4762ac3b91dedf5156d0d7b28b0a85d7a22d280684713d05489173913
name: ocaml-labltk-devel
arch: riscv64
version: 8.06.14
epoch: 0
release: 1.oe2503
summary: Tcl/Tk interface for OCaml
url: https://github.com/garrigue/labltk
rpm_license: LGPLv2+ with exceptions
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-10
rpm_sourcerpm: ocaml-labltk-8.06.14-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/ocaml-labltk-devel-8.06.14-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  labltk or mlTk is a library for interfacing OCaml with the scripting
  language Tcl/Tk (all versions since 8.0.3, but no betas).
  This package contains the development files.


pkgId: eec1c7a09712df75c6bd040c8809d56d5901eddeeef7c4e73bfd69209b9c1bd5
name: ocaml-libvirt
arch: riscv64
version: 0.6.1.7
epoch: 0
release: 1.oe2503
summary: OCaml binding for libvirt
url: http://libvirt.org/ocaml/
rpm_license: LGPLv2+
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: ocaml-libvirt-0.6.1.7-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/ocaml-libvirt-0.6.1.7-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  OCaml bindings for libvirt, allowing you to write OCaml programs and scripts which control virtualisation features.


pkgId: e5144bf1022463f1e7faf5af1095396ea45f2f18f4553c757fa5d22bccdcb4a6
name: ocaml-ounit
arch: riscv64
version: 2.0.8
epoch: 0
release: 7.oe2503
summary: OUnit is a unit test framework for OCaml
url: http://ounit.forge.ocamlcore.org/
rpm_license: MIT
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: ocaml-ounit-2.0.8-7.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/ocaml-ounit-2.0.8-7.oe2503.riscv64.rpm
checksum_type: sha256
description:
  OUnit is a unit test framework for OCaml. It allows one to easily create unit-tests for OCaml code.
  It is loosely based on HUnit, a unit testing framework for Haskell. It is similar to JUnit, and other
  XUnit testing frameworks.


pkgId: 56a1a4df9327d26b69461911bbb6190fe2aa8ddd30200243ac6b765cac929248
name: ocaml-xml-light
arch: riscv64
version: 2.5
epoch: 0
release: 1.oe2503
summary: Minimal XML parser and printer for OCaml
url: http://tech.motion-twin.com/xmllight.html
rpm_license: LGPLv2+
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: ocaml-xml-light-2.5-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/ocaml-xml-light-2.5-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The package provides functions to parse an XML document into an OCaml data structure and print it back to an XML document.
  It support also DTD parsing and checking, and is entirely written in OCaml, hence it does not require additional C library.


pkgId: a523ed8f38d7bb3db23d281f26051cfbf59a481c47f0af52f72e88f2c4bf2c7a
name: ocaml-xml-light-devel
arch: riscv64
version: 2.5
epoch: 0
release: 1.oe2503
summary: Development files for ocaml-xml-light
url: http://tech.motion-twin.com/xmllight.html
rpm_license: LGPLv2+
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Development/Libraries
rpm_buildhost: OERV-OBS
rpm_sourcerpm: ocaml-xml-light-2.5-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/ocaml-xml-light-devel-2.5-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The ocaml-xml-light-devel package contains libraries and signature files for
  developing applications that use ocaml-xml-light.


pkgId: 48aab3624b287f6f5236e9ed3073803a7e2e5e3dff10c983a9546f9f25f9ec51
name: ocf-devel
arch: noarch
version: 21.6.3.1
epoch: 0
release: 2.oe2503
summary: source code package
url: https://github.com/Open-CAS/ocf
rpm_license: BSD-3-Clause
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: ocf-21.6.3.1-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/ocf-devel-21.6.3.1-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This package contains source code of OCF and can be futher intergrated
  to project to accelerate low performance block storage with high
  performance block storage.


pkgId: d739c7f50c005f010c2889fd71fdb30ed4e6a1ef7d639d65e47bc199cca0609c
name: oddjob
arch: riscv64
version: 0.34.7
epoch: 0
release: 4.oe2503
summary: A D-Bus service which runs odd jobs on behalf of client applications
url: https://pagure.io/oddjob
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: becf869d1036
rpm_sourcerpm: oddjob-0.34.7-4.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/oddjob-0.34.7-4.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The oddjobd service receives requests to do things over the D-Bus system bus.
  Depending on whether or not the requesting user is authorized to have oddjobd
  do what it asked, the daemon will spawn a helper process to actually do the work.
  When the helper exits, oddjobd collects its output and exit status and sends them
  back to the original requester.

  It's kind of like CGI, except it's for D-Bus instead of a web server.


pkgId: 3a6c4ce0e394e9390c392b70044d37261b116b79f1b7331eb2e2889c78631e51
name: ogdi
arch: riscv64
version: 4.1.0
epoch: 0
release: 3.oe2503
summary: Open Geographic Datastore Interface
url: http://ogdi.sourceforge.net/
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: 6e7f87695b81
rpm_sourcerpm: ogdi-4.1.0-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/ogdi-4.1.0-3.oe2503.riscv64.rpm
checksum_type: sha256
description:
  OGDI is an open geographic data storage interface. OGDI is an application
  programming interface (API) that uses standardized access methods in combination
  with GIS software packages (the application) and various geospatial data products.
  OGDI uses a client / server architecture to facilitate the dissemination of
  geospatial data products on any TCP / IP network, and uses a driver-oriented
  approach to facilitate access to several geospatial data products / formats.


pkgId: ea0223ba30127161d10be59fb6b26830c96ffa3931614da935248fc178a8e504
name: oldstandard-sfd-fonts
arch: noarch
version: 2.0.2
epoch: 0
release: 1.oe2503
summary: Old Standard True-Type Fonts
url: https://fontlibrary.org/en/font/old-standard
rpm_license: OFL-1.1
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: oldstandard-sfd-fonts-2.0.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/oldstandard-sfd-fonts-2.0.2-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  The Old Standard font family is an attempt to revive
  a specific type of Modern (classicist) style of serif
  typefaces, very commonly used in various editions
  printed in the late 19th and early 20th century,
  but almost completely  abandoned later.


pkgId: b9195496d5690b02a6d53de9333eb0428550337296d9f3533630bd8f33883037
name: onednn
arch: riscv64
version: 2.6
epoch: 0
release: 2.oe2503
summary: Deep Neural Network Library
url: https://github.com/oneapi-src/oneDNN/
rpm_license: ASL 2.0 and BSD and Boost and MIT
rpm_group: Unspecified
rpm_buildhost: 211d86dd4bce
rpm_sourcerpm: onednn-2.6-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/onednn-2.6-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  one-API Deep Neural Network Library (oneDNN) is an open-source performance
  library for deep learning applications. The library includes basic
  building blocks for neural networks optimized for Intel Architecture
  Processors and Intel Processor Graphics.

  oneDNN is intended for deep learning applications and framework developers
  interested in improving application performance on Intel CPUs and
  GPUs. Deep learning practitioners should use one of the applications
  enabled with oneDNN:


pkgId: 8c39c8484fe3e0760873a53b64414b089e138d6c950ec9a2a899f0279d761c93
name: onednn-devel
arch: riscv64
version: 2.6
epoch: 0
release: 2.oe2503
summary: Development files for onednn
url: https://github.com/oneapi-src/oneDNN/
rpm_license: ASL 2.0 and BSD and Boost and MIT
rpm_group: Unspecified
rpm_buildhost: 211d86dd4bce
rpm_sourcerpm: onednn-2.6-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/onednn-devel-2.6-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The onednn-devel package contains libraries and header files for
  developing applications that use onednn.


pkgId: 793298b4d2e79c2e6024b8c061bc26e5107431b815368c5060656f31d48c235e
name: ongres-scram
arch: noarch
version: 2.1
epoch: 0
release: 2.oe2503
summary: Java Implementation for SCRAM(Salted Challenge Response Authentication Mechanism)
url: https://github.com/ongres/scram
rpm_license: BSD
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: ongres-scram-2.1-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/ongres-scram-2.1-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  Scram is part of the family of Simple Authentication and Security Layer
  authentication mechanisms.It is described as part of RFC 5802 and RFC7677.
  This pachage is a Java implementation.


pkgId: 7f49da0ccff69927758cbae9c3f3de25b5b7ecdf5b8110f48223893215e686c1
name: ongres-stringprep
arch: noarch
version: 1.1
epoch: 0
release: 1.oe2503
summary: RFC 3454 Preparation of Internationalized Strings in pure Java
url: https://github.com/ongres/stringprep
rpm_license: BSD
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: ongres-stringprep-1.1-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/ongres-stringprep-1.1-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  The stringprep protocol does not stand on its own;
  it has to be used by other protocols at precisely-defined
  places in those other protocols.


pkgId: 6aba8c45054459d387356f9795cd129c9a867948a353e7a9edf8d8498a64f1ea
name: oniguruma
arch: riscv64
version: 6.9.9
epoch: 0
release: 1.oe2503
summary: Regular expressions library
url: https://github.com/kkos/oniguruma/
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: 0a40e7c74658
rpm_sourcerpm: oniguruma-6.9.9-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/oniguruma-6.9.9-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Oniguruma is a regular expressions library.
  The characteristics of this library is that different character encoding
  for every regular expression object can be specified.
  (supported APIs: GNU regex, POSIX and Oniguruma native)


pkgId: 44bc3a1a13927f6b1eb1439e4d20f648873483fd6a343f99059a1628c52b18f7
name: oniguruma-devel
arch: riscv64
version: 6.9.9
epoch: 0
release: 1.oe2503
summary: Development files for oniguruma
url: https://github.com/kkos/oniguruma/
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: 0a40e7c74658
rpm_sourcerpm: oniguruma-6.9.9-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/oniguruma-devel-6.9.9-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The oniguruma-devel package contains libraries and header files for
  developing applications that use oniguruma.


pkgId: ef81e9fc3de2c72a7875455876da9cde371655e1e04e878b459749bfc6345c79
name: open-iscsi
arch: riscv64
version: 2.1.5
epoch: 0
release: 14.oe2503
summary: ISCSI software initiator daemon and utility programs
url: http://www.open-iscsi.com
rpm_license: GPLv2+ and BSD
rpm_group: Unspecified
rpm_buildhost: dd7969473d58
rpm_sourcerpm: open-iscsi-2.1.5-14.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/open-iscsi-2.1.5-14.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The Open-iSCSI project is a high-performance, transport independent,
  multi-platform implementation of RFC3720 iSCSI.

  Open-iSCSI is partitioned into user and kernel parts.

  The kernel portion of Open-iSCSI is a from-scratch code
  licensed under GPL. The kernel part implements iSCSI data path
  (that is, iSCSI Read and iSCSI Write), and consists of three
  loadable modules: scsi_transport_iscsi.ko, libiscsi.ko and iscsi_tcp.ko.

  User space contains the entire control plane: configuration
  manager, iSCSI Discovery, Login and Logout processing,
  connection-level error processing, Nop-In and Nop-Out handling,
  and (in the future:) Text processing, iSNS, SLP, Radius, etc.

  The user space Open-iSCSI consists of a daemon process called
  iscsid, and a management utility iscsiadm.


pkgId: e6259e20c2a71a6844104d884c1d668ebc1b4a4c0f23a0e314efde29d1978802
name: open-isns
arch: riscv64
version: 0.102
epoch: 0
release: 2.oe2503
summary: The iSNS server and client programs
url: https://github.com/open-iscsi/open-isns
rpm_license: LGPLv2+
rpm_group: Unspecified
rpm_buildhost: 2804cc95d18f
rpm_sourcerpm: open-isns-0.102-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/open-isns-0.102-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The open-isns package consists of the iSNS server and client programs,
  which is a partial implementation of the iSNS protocol. The iSNS protocol
  is defined in [RFC 4171](http://tools.ietf.org/html/rfc4171) and the
  purpose of which is to allow it automated and convenient to discover, manage,
  and configure iSCSI devices.


pkgId: 3ddc3050514db477a078c4bc304d5042b19ff61e23ecbec89518b9a5cdd15a82
name: open-sans-fonts
arch: noarch
version: 1.10
epoch: 0
release: 11.oe2503
summary: A humanist sans-serif typeface
url: http://www.google.com/fonts/specimen/Open+Sans
rpm_license: ASL 2.0
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-10
rpm_sourcerpm: open-sans-fonts-1.10-11.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/open-sans-fonts-1.10-11.oe2503.noarch.rpm
checksum_type: sha256
description:
  This package provides a humanist sans-serif typeface.It is designed by Steve
  Matteson.This typeface is very legible on screen and at small sizes.It is popular
  in flat design-style web design.


pkgId: 492a38b76205bbaeee6fcce35afc1f1efc713a31d521e8f6bb533c7fc5a41c63
name: openEuler-indexhtml
arch: noarch
version: 7
epoch: 0
release: 15.oe2503
summary: Browser default start page for openEuler
rpm_license: CC-BY-SA-4.0
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: openEuler-indexhtml-7-15.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openEuler-indexhtml-7-15.oe2503.noarch.rpm
checksum_type: sha256
description:
  The indexhtml package contains the welcome page shown by your Web browser,
  which you'll see after you've successfully installed openEuler Linux


pkgId: c5af54b07451f0c8a43aa8d6d2b875762fc51cb4ddbac7c32ba19776868e49a5
name: openEuler-latest-release
arch: riscv64
version: 1.0
epoch: 0
release: 1.oe2503
rpm_license: GPL-1.0-or-later
rpm_group: System/Config
rpm_buildhost: 035342206f33
rpm_sourcerpm: openEuler-latest-release-1.0-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openEuler-latest-release-1.0-1.oe2503.riscv64.rpm
checksum_type: sha256
summary:
  System information like kernelversion, openeulerversion, gccversion, openjdkversion and compile time

description:
  The rpm contains system information, like kernelversion, eulerversion and compile time so on.

  %setup -q


pkgId: 776cd4ca0095af8ff0d618d819cb0d70bacf8b512c3b7724e6daaf82ac6043c0
name: openEuler-logos-httpd
arch: noarch
version: 1.0
epoch: 0
release: 9.oe2503
summary: openEuler-related icons and pictures used by httpd
rpm_license: Licensed only for approved usage, see COPYING for details.
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: openEuler-logos-1.0-9.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openEuler-logos-httpd-1.0-9.oe2503.noarch.rpm
checksum_type: sha256
description:
  The openEuler-logos-httpd package contains image files which incorporate the
  openEuler trademarks (the "Marks").


pkgId: 5398d32441afddedb85af4034a0d2a229b61f0c4776327353d4b942c01405394
name: openal-soft
arch: riscv64
version: 1.24.2
epoch: 0
release: 1.oe2503
summary: A software implementation of the OpenAL 3D audio API
url: https://openal-soft.org/
rpm_license: LGPL-2.0-or-later AND BSD-3-Clause
rpm_group: Unspecified
rpm_buildhost: 7f58f97fd760
rpm_sourcerpm: openal-soft-1.24.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openal-soft-1.24.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  OpenAL Soft is an LGPL-licensed, cross-platform, software implementation of the OpenAL 3D
  audio API. It's forked from the open-sourced Windows version available originally from
  openal.org's SVN repository (now defunct).
  OpenAL provides capabilities for playing audio in a virtual 3D environment. Distance attenuation,
  doppler shift, and directional sound emitters are among the features handled by the API.
  More advanced effects, including air absorption, occlusion, and environmental reverb, are available
  through the EFX extension. It also facilitates streaming audio, multi-channel buffers, and audio capture.


pkgId: 943a4e7cea0d427c560a83350b62ad0083d73ab23a5c007b930715b67d6e7480
name: openal-soft-devel
arch: riscv64
version: 1.24.2
epoch: 0
release: 1.oe2503
summary: Development package for openal-soft
url: https://openal-soft.org/
rpm_license: LGPL-2.0-or-later AND BSD-3-Clause
rpm_group: Unspecified
rpm_buildhost: 7f58f97fd760
rpm_sourcerpm: openal-soft-1.24.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openal-soft-devel-1.24.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains some libraries and header files for the development
  use of openal-soft. It also contains some sample applications for openal-soft.


pkgId: c9c920e584e398c66dd82d342d6426ab13d96b6143b7b8329e504f9bce89dcd1
name: openblas
arch: riscv64
version: 0.3.28
epoch: 0
release: 3.oe2503
summary: An optimized BLAS library based on GotoBLAS2 1.13 BSD version
url: https://github.com/xianyi/OpenBLAS/
rpm_license: BSD-3-Clause
rpm_group: Unspecified
rpm_buildhost: 329ccbce4d5b
rpm_sourcerpm: openblas-0.3.28-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openblas-0.3.28-3.oe2503.riscv64.rpm
checksum_type: sha256
description:
  OpenBLAS is an optimized BLAS library based on GotoBLAS2 1.13 BSD \
  version. The Lab of Parallel Software and Computationla Science, ISCAS \
  supports this project, see: http://www.rdcps.ac.cn


pkgId: 1e89f42d100854403279edc8e7a0158c217f482ed017191c43200c89d57f4abc
name: opencc
arch: riscv64
version: 1.1.7
epoch: 0
release: 2.oe2503
summary: Simplified Chinese Traditional Conversion Library
url: https://github.com/BYVoid/OpenCC
rpm_license: Apache-2.0
rpm_group: Unspecified
rpm_buildhost: 80413ae7ca11
rpm_sourcerpm: opencc-1.1.7-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/opencc-1.1.7-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Opencc is for between Traditional Chinese and Simplified Chinese characters and phrases conversion library.


pkgId: bf1e2b3866fde0c9dd34395e8433bfeed2955bd17083b1708839d9fb627d3605
name: opencore-amr
arch: riscv64
version: 0.1.6
epoch: 0
release: 1.oe2503
summary: OpenCORE Adaptive Multi Rate Narrowband and Wideband speech lib
url: http://sourceforge.net/projects/opencore-amr/
rpm_license: ASL 2.0
rpm_group: Unspecified
rpm_buildhost: 8850536ca83c
rpm_sourcerpm: opencore-amr-0.1.6-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/opencore-amr-0.1.6-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Library of OpenCORE Framework implementation of Adaptive Multi Rate Narrowband
  and Wideband speech codec.


pkgId: 4bc0b766fc3cbb630ab14c53cf3988d72f0dc1457afefa76c2c4c418e7cdded7
name: opencore-amr-devel
arch: riscv64
version: 0.1.6
epoch: 0
release: 1.oe2503
summary: Development files for opencore-amr
url: http://sourceforge.net/projects/opencore-amr/
rpm_license: ASL 2.0
rpm_group: Unspecified
rpm_buildhost: 8850536ca83c
rpm_sourcerpm: opencore-amr-0.1.6-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/opencore-amr-devel-0.1.6-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The opencore-amr-devel package contains libraries and header files for
  developing applications that use opencore-amr.


pkgId: 0f935887878c6a9de022a725ce4c2d72e99ea8c9f8a01b905c258b6517a6ac6f
name: opencryptoki
arch: riscv64
version: 3.24.0
epoch: 0
release: 1.oe2503
summary: PKCS#11 library and tools for Linux
url: https://github.com/opencryptoki/opencryptoki
rpm_license: CPL-1.0
rpm_group: Unspecified
rpm_buildhost: 4cfd7c60122d
rpm_sourcerpm: opencryptoki-3.24.0-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/opencryptoki-3.24.0-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  openCryptoki is an implementation of the PKCS #11 API that allows interfacing to devices
  that hold cryptographic information and perform cryptographic functions.
  openCryptoki provides application portability by isolating the application
  from the details of the cryptographic device.
  Isolating the application also provides an added level of security.
  The openCryptoki API provides a standard programming interface between applications
  and all kinds of portable cryptographic devices.


pkgId: fac835e73bcaf8a9e7b299395e9b3b2fa572e407252f24807b3bceb563ee40f2
name: opencryptoki-devel
arch: riscv64
version: 3.24.0
epoch: 0
release: 1.oe2503
summary: Development files for openCryptoki
url: https://github.com/opencryptoki/opencryptoki
rpm_license: CPL-1.0
rpm_group: Unspecified
rpm_buildhost: 4cfd7c60122d
rpm_sourcerpm: opencryptoki-3.24.0-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/opencryptoki-devel-3.24.0-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package provides development and header files for building
  opencryptoki and PKCS#11 based applications.


pkgId: 307c1143d114a394f129f3d81341832449d7d857b93800de80f30efa90a4549b
name: openeuler-lsb
arch: riscv64
version: 5.0
epoch: 0
release: 1.oe2503
summary: LSB support for linux Standard Base specification
url: http://www.linuxfoundation.org/collaborate/workgroups/lsb
rpm_license: GPLv2
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-11
rpm_sourcerpm: openeuler-lsb-5.0-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openeuler-lsb-5.0-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The Linux Standard Base (LSB) is an attempt to develop a set of
  standards that will increase compatibility among Linux distributions.
  It is designed to be binary-compatible and produce a stable application
  binary interface(ABI) for independent software vendors.


pkgId: de83c7701db25426774289eda754c3a8d2181b83e54ecad48418db42c88830d7
name: openhpi
arch: riscv64
version: 3.8.0
epoch: 0
release: 12.oe2503
summary: Implementation of the Service Availability Forum's Hardware Platform Interface
url: http://www.openhpi.org
rpm_license: BSD-3-Clause
rpm_group: Unspecified
rpm_buildhost: 7d5ddd78cae7
rpm_sourcerpm: openhpi-3.8.0-12.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openhpi-3.8.0-12.oe2503.riscv64.rpm
checksum_type: sha256
description:
  OpenHPI provides an open source implementation of the Service Availability
  Forum (SAF) Hardware Platform Interface (HPI). HPI is an abstracted interface
  for managing computer hardware, typically chassis and rack based servers. HPI
  includes resource modeling; access to and control over sensor, control,
  watchdog, and inventory data associated with resources; abstracted System
  Event Log interfaces; hardware events and alarms; and a managed hotswap
  interface.

  OpenHPI's architecture contains a modular mechanism intended to make adding
  new hardware support easier. Several plugins exist in the OpenHPI source tree
  giving access to various types of hardware. This includes, but is not limited
  to, IPMI based servers, Blade Center, and machines which export data via sysfs.


pkgId: eeaba0388e6e0b8f245c37fdce664b2a2d6996e2caed309d498a5b123d3670c1
name: openjade
arch: riscv64
version: 1.3.2
epoch: 0
release: 62.oe2503
summary: A implementation of DSSSL
url: http://openjade.sourceforge.net/
rpm_license: X11
rpm_group: Unspecified
rpm_buildhost: 7d2ffe64c655
rpm_sourcerpm: openjade-1.3.2-62.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openjade-1.3.2-62.oe2503.riscv64.rpm
checksum_type: sha256
description:
  OpenJade is a project undertaken by the DSSSL community to maintain and extend Jade,
  as well as the related SP suite of SGML/XML processing tools. OpenJade and OpenSP are
  distributed under the same license as Jade.


pkgId: 327b1012c8f263f80c810f97f612a39e9a7951f08b184a43888c7e4e9e3a2a1f
name: openjfx
arch: riscv64
version: 11.0.18.0
epoch: 0
release: 4.oe2503
summary: Rich client application platform for Java
url: http://openjdk.java.net/projects/openjfx/
rpm_license: GPL v2 with exceptions and BSD
rpm_group: Unspecified
rpm_buildhost: c2e8c88e5f4a
rpm_sourcerpm: openjfx-11.0.18.0-4.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openjfx-11.0.18.0-4.oe2503.riscv64.rpm
checksum_type: sha256
description:
  JavaFX/OpenJFX is a set of graphics and media APIs that enables Java
  developers to design, create, test, debug, and deploy rich client
  applications that operate consistently across diverse platforms.

  The media and web module have been removed due to missing dependencies.


pkgId: f850b323a699a2d6e5283d5cb37693c901693fdb8f117580ed09abaf70f7a968
name: openjpa
arch: noarch
version: 2.4.1
epoch: 0
release: 6.oe2503
summary: Java Persistence 2.0 API
url: http://openjpa.apache.org/
rpm_license: BSD and Apache-2.0 and CDDL-1.0 and GPLv2+
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: openeuler-riscv64
rpm_sourcerpm: openjpa-2.4.1-6.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openjpa-2.4.1-6.oe2503.noarch.rpm
checksum_type: sha256
description:
  OpenJPA is Apache's implementation of Sun's Java Persistence 2.0 API
  (JSR-317 JPA 2.0) specification for the transparent persistence of
  Java objects.
  It is an object-relational mapping (ORM) solution for the Java language,
  which simplifies storing objects in databases.


pkgId: 257ddfc7b7cab67e2f00a832440e90ce53bcde86d6c26fe64dd1ca143eb8f71a
name: openjpeg2
arch: riscv64
version: 2.5.3
epoch: 0
release: 1.oe2503
summary: C-Library for JPEG 2000
url: https://github.com/uclouvain/openjpeg
rpm_license: BSD-2-Clause AND MIT
rpm_group: Unspecified
rpm_buildhost: 996ac72a72b0
rpm_sourcerpm: openjpeg2-2.5.3-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openjpeg2-2.5.3-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  OpenJPEG is an open-source JPEG 2000 codec written in C language. It has been developed in order
  to promote the use of JPEG 2000, a still-image compression standard from the Joint Photographic
  Experts Group (JPEG). Since April 2015, it is officially recognized by ISO/IEC and ITU-T as a
  JPEG 2000 Reference Software.


pkgId: ca4a4e12c6a9b0c1caab25c0cde354003e39eb14dd3f636968d2b1254d06525d
name: openjpeg2-devel
arch: riscv64
version: 2.5.3
epoch: 0
release: 1.oe2503
summary: Development files for OpenJPEG 2
url: https://github.com/uclouvain/openjpeg
rpm_license: BSD-2-Clause AND MIT
rpm_group: Unspecified
rpm_buildhost: 996ac72a72b0
rpm_sourcerpm: openjpeg2-2.5.3-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openjpeg2-devel-2.5.3-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The openjpeg2-devel package contains libraries and header files for developing
  applications that use OpenJPEG 2.


pkgId: 0997face2aec37747020300f085da6484034acaef850d82b40aa88adf69bb31a
name: openjpeg2-tools
arch: riscv64
version: 2.5.3
epoch: 0
release: 1.oe2503
summary: OpenJPEG 2 command line tools
url: https://github.com/uclouvain/openjpeg
rpm_license: BSD-2-Clause AND MIT
rpm_group: Unspecified
rpm_buildhost: 996ac72a72b0
rpm_sourcerpm: openjpeg2-2.5.3-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openjpeg2-tools-2.5.3-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Command line tools for JPEG 2000 file manipulation, using OpenJPEG2:
   * opj2_compress
   * opj2_decompress
   * opj2_dump


pkgId: e31368b099ba7813e1c24b080f44ab3e92e62e79981814485b21cdb8e124ab4d
name: openldap
arch: riscv64
version: 2.6.5
epoch: 0
release: 6.oe2503
summary: LDAP support libraries
url: https://www.openldap.org/
rpm_license: OLDAP-2.8
rpm_group: Unspecified
rpm_buildhost: 12122672b7aa
rpm_sourcerpm: openldap-2.6.5-6.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openldap-2.6.5-6.oe2503.riscv64.rpm
checksum_type: sha256
description:
  OpenLDAP is an open source suite of LDAP (Lightweight Directory Access
  Protocol) applications and development tools. LDAP is a set of
  protocols for accessing directory services (usually phone book style
  information, but other information is possible) over the Internet,
  similar to the way DNS (Domain Name System) information is propagated
  over the Internet. The openldap package contains configuration files,
  libraries, and documentation for OpenLDAP.


pkgId: 9c14b180f5b59c796532e7a0c14ed9b35bbc32ea7d7e85858cd03b6ccd819d76
name: openldap-clients
arch: riscv64
version: 2.6.5
epoch: 0
release: 6.oe2503
summary: LDAP client utilities
url: https://www.openldap.org/
rpm_license: OLDAP-2.8
rpm_group: Unspecified
rpm_buildhost: 12122672b7aa
rpm_sourcerpm: openldap-2.6.5-6.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openldap-clients-2.6.5-6.oe2503.riscv64.rpm
checksum_type: sha256
description:
  OpenLDAP is an open-source suite of LDAP (Lightweight Directory Access
  Protocol) applications and development tools. LDAP is a set of
  protocols for accessing directory services (usually phone book style
  information, but other information is possible) over the Internet,
  similar to the way DNS (Domain Name System) information is propagated
  over the Internet. The openldap-clients package contains the client
  programs needed for accessing and modifying OpenLDAP directories.


pkgId: 98deadf6b46f0a0fda17bf5671eb8c868f5518ff8c7538fde0665e16bea874d4
name: openldap-devel
arch: riscv64
version: 2.6.5
epoch: 0
release: 6.oe2503
summary: LDAP development libraries and header files
url: https://www.openldap.org/
rpm_license: OLDAP-2.8
rpm_group: Unspecified
rpm_buildhost: 12122672b7aa
rpm_sourcerpm: openldap-2.6.5-6.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openldap-devel-2.6.5-6.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The openldap-devel package includes the development libraries and
  header files needed for compiling applications that use LDAP
  (Lightweight Directory Access Protocol) internals. LDAP is a set of
  protocols for enabling directory services over the Internet. Install
  this package only if you plan to develop or will need to compile
  customized LDAP clients.


pkgId: ae45e607a34aeea1db8ee7a0f36c6536e93bcf1c7558c70d2338a967d63bef3c
name: openldap-servers
arch: riscv64
version: 2.6.5
epoch: 0
release: 6.oe2503
summary: LDAP server
url: https://www.openldap.org/
rpm_license: OLDAP-2.8
rpm_group: Unspecified
rpm_buildhost: 12122672b7aa
rpm_sourcerpm: openldap-2.6.5-6.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openldap-servers-2.6.5-6.oe2503.riscv64.rpm
checksum_type: sha256
description:
  OpenLDAP is an open-source suite of LDAP (Lightweight Directory Access
  Protocol) applications and development tools. LDAP is a set of
  protocols for accessing directory services (usually phone book style
  information, but other information is possible) over the Internet,
  similar to the way DNS (Domain Name System) information is propagated
  over the Internet. This package contains the slapd server and related files.


pkgId: 044cef724d4a25efd42da2caf6a811a54bf8f3b138387080e10ee9eef6681a1e
name: openmpi
arch: riscv64
version: 5.0.6
epoch: 0
release: 1.oe2503
summary: Open Source High Performance Computing
url: https://www.open-mpi.org/
rpm_license: BSD-3-Clause
rpm_group: Unspecified
rpm_buildhost: 4955ffbd6c32
rpm_sourcerpm: openmpi-5.0.6-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openmpi-5.0.6-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The Open MPI Project is an open source Message Passing Interface
  implementation that is developed and maintained by a consortium
  of academic, research, and industry partners. Open MPI is
  therefore able to combine the expertise, technologies, and
  resources from all across the High Performance Computing
  community in order to build the best MPI library available.


pkgId: 66a478151680d439e695e9daa0afbad05c5eaced8374f35ec361dac8d571bc97
name: opensc
arch: riscv64
version: 0.26.0
epoch: 0
release: 1.oe2503
summary: Smart card library and applications
url: https://github.com/OpenSC/OpenSC/wiki
rpm_license: LGPL-2.1-or-later
rpm_group: Unspecified
rpm_buildhost: 59386656713d
rpm_sourcerpm: opensc-0.26.0-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/opensc-0.26.0-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  OpenSC provides a set of libraries and utilities to work with smart cards.
  Its main focus is on cards that support cryptographic operations, and
  facilitate their use in security applications such as authentication,
  mail encryption and digital signatures. OpenSC implements the standard
  APIs to smart cards, e.g. PKCS#11 API, Windows’ Smart Card Minidriver
  and macOS Tokend.


pkgId: c6cedee802affcb51d8776f9885b138ffe1be5182bfe0c543326a4b31991c7d8
name: openscap
arch: riscv64
version: 1.4.1
epoch: 0
release: 1.oe2503
summary: An open source framework in order to provide a interface for using scap
url: https://www.open-scap.org
rpm_license: LGPL-2.1-or-later
rpm_group: Unspecified
rpm_buildhost: e71ffe786790
rpm_sourcerpm: openscap-1.4.1-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openscap-1.4.1-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Openscap is an open source framework that integrates secure content automation protocols. Its goal is to provide a simple
  and easy to use interface for using scap.


pkgId: 5a4018b0e720b0cceb6ae78f9514558079c6c43a29cfad150e33fc669624d948
name: openscap-devel
arch: riscv64
version: 1.4.1
epoch: 0
release: 1.oe2503
summary: Header files and libraries for development
url: https://www.open-scap.org
rpm_license: LGPL-2.1-or-later
rpm_group: Unspecified
rpm_buildhost: e71ffe786790
rpm_sourcerpm: openscap-1.4.1-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openscap-devel-1.4.1-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The openscap-devel package contains the static libraries, the header files and other development content.


pkgId: 1721b708f57567b6c9536bb6604c176369fb53d036e4a34ad4abd766cacb34aa
name: openslp
arch: riscv64
version: 2.0.0
epoch: 1
release: 27.oe2503
summary: Open-source inplementation of the IETF Service Location Protocol
url: https://sourceforge.net/projects/openslp/
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: 7d9542a74d90
rpm_sourcerpm: openslp-2.0.0-27.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openslp-2.0.0-27.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Service Location Protocol (SLP) is an Internet Engineering Task Force (IETF) standards track protocol\
  that provides a framework to allow networking applications to discover the existence, location,\
  and configuration of networked services in enterprise networks.


pkgId: 1e0c92c4d7c5de492fd17a6e97dc46f2dcebab6eff626a1e3d09dd3027422684
name: opensm
arch: riscv64
version: 3.3.24
epoch: 0
release: 2.oe2503
summary: InfiniBand Subnet Manager and Administrator
url: https://github.com/linux-rdma/opensm
rpm_license: GPL-2.0-only OR Linux-OpenIB
rpm_group: Unspecified
rpm_buildhost: 72c7598fc08a
rpm_sourcerpm: opensm-3.3.24-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/opensm-3.3.24-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  OpenSM provides an implementation for an InfiniBand Subnet Manager and
  Administrator. Such a software entity is required to run for in order
  to initialize the InfiniBand hardware (at least one per each
  InfiniBand subnet).

  The full list of OpenSM features is described in the user manual
  provided in the doc sub directory.


pkgId: a8f52472c5c74cab717a1e4dda72cec4a5fa69f945e9373e34eaf6416e6ec493
name: opensm-devel
arch: riscv64
version: 3.3.24
epoch: 0
release: 2.oe2503
summary: Development files for opensm
url: https://github.com/linux-rdma/opensm
rpm_license: GPL-2.0-only OR Linux-OpenIB
rpm_group: Unspecified
rpm_buildhost: 72c7598fc08a
rpm_sourcerpm: opensm-3.3.24-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/opensm-devel-3.3.24-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains libraries for developing applications that use
  opensm and static version of opensm libraries


pkgId: 3c2a5168535555b6ca30f1f30bcfacebb7259a2648a11982612f8d7d0340eb2e
name: opensp
arch: riscv64
version: 1.5.2
epoch: 0
release: 32.oe2503
summary: SGML and XML parser
url: http://openjade.sourceforge.net/
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: 6cde322aa5c8
rpm_sourcerpm: opensp-1.5.2-32.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/opensp-1.5.2-32.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The OpenSP is an SGML(Standard Generalized Markup Language) System
  Conforming to International Standard ISO 8879.
  The OpenSP package contains a C++ library for using SGML/XML files.


pkgId: cb1e829d695e342d743ff15f86b6d1f37dd8932572a50ee945d9499eccd91d57
name: opensp-devel
arch: riscv64
version: 1.5.2
epoch: 0
release: 32.oe2503
summary: Files for developing applications using OpenSP
url: http://openjade.sourceforge.net/
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: 6cde322aa5c8
rpm_sourcerpm: opensp-1.5.2-32.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/opensp-devel-1.5.2-32.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The opensp-devel package contains header files and
  libtool library for developing applications using OpenSP.


pkgId: 7a697408370d9c8dc70bd09787c066bf09a77af1e495e86eca41a5bb3b18818d
name: openssh
arch: riscv64
version: 9.6p1
epoch: 0
release: 5.oe2503
summary: An open source implementation of SSH protocol version 2
url: http://www.openssh.com/portable.html
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: 757c152f7930
rpm_sourcerpm: openssh-9.6p1-5.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openssh-9.6p1-5.oe2503.riscv64.rpm
checksum_type: sha256
description:
  OpenSSH is the premier connectivity tool for remote login with the SSH protocol. \
  It encrypts all traffic to eliminate eavesdropping, connection hijacking, and \
  other attacks. In addition, OpenSSH provides a large suite of secure tunneling \
  capabilities, several authentication methods, and sophisticated configuration options.


pkgId: 009b61a8aa5793f2509bfada2f4c23910915936134b58e95245f678bd0d7c61d
name: openssh-askpass
arch: riscv64
version: 9.6p1
epoch: 0
release: 5.oe2503
summary: A passphrase dialog for OpenSSH and X
url: http://www.openssh.com/portable.html
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: 757c152f7930
rpm_sourcerpm: openssh-9.6p1-5.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openssh-askpass-9.6p1-5.oe2503.riscv64.rpm
checksum_type: sha256
description:
  OpenSSH is a free version of SSH (Secure SHell), a program for logging
  into and executing commands on a remote machine. This package contains
  an X11 passphrase dialog for OpenSSH.


pkgId: 9fa116860480fd14b13fca582b5a56b2a32b43853e40a58eb96dbed8e9d34192
name: openssh-clients
arch: riscv64
version: 9.6p1
epoch: 0
release: 5.oe2503
summary: An open source SSH client applications
url: http://www.openssh.com/portable.html
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: 757c152f7930
rpm_sourcerpm: openssh-9.6p1-5.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openssh-clients-9.6p1-5.oe2503.riscv64.rpm
checksum_type: sha256
description:
  OpenSSH is a free version of SSH (Secure SHell), a program for logging
  into and executing commands on a remote machine. This package includes
  the clients necessary to make encrypted connections to SSH servers.


pkgId: 7b122e6ad5f14e9dfdd347276a7dcf55586de231f79543dc708873154f8d71d8
name: openssh-server
arch: riscv64
version: 9.6p1
epoch: 0
release: 5.oe2503
summary: An open source SSH server daemon
url: http://www.openssh.com/portable.html
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: 757c152f7930
rpm_sourcerpm: openssh-9.6p1-5.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openssh-server-9.6p1-5.oe2503.riscv64.rpm
checksum_type: sha256
description:
  OpenSSH is a free version of SSH (Secure SHell), a program for logging
  into and executing commands on a remote machine. This package contains
  the secure shell daemon (sshd). The sshd daemon allows SSH clients to
  securely connect to your SSH server.


pkgId: 4d0ff4980b07acf542cabe8b2b3e9e9a8440187d0890413d1beea3d8ce8088d8
name: openssl
arch: riscv64
version: 3.0.12
epoch: 1
release: 16.oe2503
summary: Cryptography and SSL/TLS Toolkit
url: https://www.openssl.org/
rpm_license: OpenSSL and SSLeay
rpm_group: Unspecified
rpm_buildhost: 1f664ef0a328
rpm_sourcerpm: openssl-3.0.12-16.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openssl-3.0.12-16.oe2503.riscv64.rpm
checksum_type: sha256
description:
  OpenSSL is a robust, commercial-grade, and full-featured toolkit for the
  Transport Layer Security (TLS) and Secure Sockets Layer (SSL) protocols.


pkgId: ecdf1529f58540e09e794a4a85a23c7205164209029377c3e215b7afb0c426cc
name: openssl-perl
arch: riscv64
version: 3.0.12
epoch: 1
release: 16.oe2503
summary: Perl scripts provided with OpenSSL
url: https://www.openssl.org/
rpm_license: OpenSSL and SSLeay
rpm_group: Unspecified
rpm_buildhost: 1f664ef0a328
rpm_sourcerpm: openssl-3.0.12-16.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openssl-perl-3.0.12-16.oe2503.riscv64.rpm
checksum_type: sha256
description:
  OpenSSL is a toolkit for supporting cryptography. The openssl-perl
  package provides Perl scripts for converting certificates and keys
  from other formats to the formats used by the OpenSSL toolkit.


pkgId: c1b8b9f8bd105cc108edab9618e53c971d61a22abf56e5b60f6384aac8ff3a64
name: openssl-pkcs11
arch: riscv64
version: 0.4.12
epoch: 0
release: 3.oe2503
summary: A PKCS#11 engine for use with OpenSSL
url: https://github.com/OpenSC/libp11
rpm_license: LGPLv2+ and BSD
rpm_group: Unspecified
rpm_buildhost: 12a01a3a36b7
rpm_sourcerpm: openssl-pkcs11-0.4.12-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openssl-pkcs11-0.4.12-3.oe2503.riscv64.rpm
checksum_type: sha256
description:
  openssl-pkcs11 is an implementation of an engine for OpenSSL. It can be loaded
  using code, config file or command line and will pass any function call by
  OpenSSL to a PKCS#11 module. openssl-pkcs11 is meant to be used with smart
  cards and software for using smart cards in PKCS#11 format, such as OpenSC.


pkgId: 86beb53e76f4237e1ccace727e10dc47cab2139caacf123e7bd3345216d888ab
name: openssl_tpm2_engine
arch: riscv64
version: 2.4.2
epoch: 0
release: 3.oe2503
summary: OpenSSL TPM 2.0 interface engine plugin
url: https://git.kernel.org/pub/scm/linux/kernel/git/jejb/openssl_tpm2_engine.git/
rpm_license: LGPL-2.1-only
rpm_group: Productivity/Security
rpm_buildhost: b4768d9f40be
rpm_sourcerpm: openssl_tpm2_engine-2.4.2-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openssl_tpm2_engine-2.4.2-3.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains a plugin a for OpenSSL which connects it with the
  Trusted Platform Module version 2.0 found on newer machines and a
  create_tpm2_key helper binary to create and extract a TPM key.


pkgId: 89d6708f293686538b2c674581b7fe41fb16db571a1d337afd72cdfe89a8b4f1
name: opentest4j
arch: noarch
version: 1.3.0
epoch: 0
release: 1.oe2503
summary: Open Test Alliance for the JVM
url: https://github.com/ota4j-team/opentest4j
rpm_license: ASL 2.0
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: opentest4j-1.3.0-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/opentest4j-1.3.0-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  Open Test Alliance for the JVM is a minimal common foundation for
  testing libraries on the JVM.  The primary goal of the project is to
  enable testing frameworks like JUnit, TestNG, Spock, etc. and
  third-party assertion libraries like Hamcrest, AssertJ, etc. to use a
  common set of exceptions that IDEs and build tools can support in a
  consistent manner across all testing scenarios -- for example, for
  consistent handling of failed assertions and failed assumptions as
  well as visualization of test execution in IDEs and reports.


pkgId: eb96453af4d7693dbb022e5213a4d129b303e5d392c93734daeb820ce1a33d45
name: openvpn
arch: riscv64
version: 2.6.13
epoch: 0
release: 1.oe2503
summary: A full-featured open source SSL VPN solution
url: https://community.openvpn.net/openvpn
rpm_license: GPL-2.0-or-later and OpenSSL and SSLeay
rpm_group: Unspecified
rpm_buildhost: 5bb2cd2798c7
rpm_sourcerpm: openvpn-2.6.13-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openvpn-2.6.13-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  OpenVPN is a full-featured open source SSL VPN solution that accommodates a wide range of configurations,
  including remote access, site-to-site VPNs, Wi-Fi security, and enterprise-scale remote access solutions with load balancing,
  failover, and fine-grained access-controls. Starting with the fundamental premise that complexity is the enemy of security,
  OpenVPN offers a cost-effective, lightweight alternative to other VPN technologies that is well-adapted for the SME and enterprise markets.


pkgId: cc32018133b469649e5a26e0fb590c2127bc5ffc30b73ee00e5e892d435dee0f
name: openvpn-devel
arch: riscv64
version: 2.6.13
epoch: 0
release: 1.oe2503
summary: Development headers and examples for OpenVPN plug-ins
url: https://community.openvpn.net/openvpn
rpm_license: GPL-2.0-or-later and OpenSSL and SSLeay
rpm_group: Unspecified
rpm_buildhost: 5bb2cd2798c7
rpm_sourcerpm: openvpn-2.6.13-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openvpn-devel-2.6.13-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  OpenVPN can be extended through the --plugin option, which provides possibilities to add specialized authentication,
  user accounting, packet filtering and related features. These plug-ins need to be written in C and
  provides a more low-level and information rich access to similar features as the various script-hooks.


pkgId: 515affdb8397e54269bd94b10c435386a8772b6ffc35842b25c5ddd4a866d4f4
name: openvswitch
arch: riscv64
version: 3.3.1
epoch: 0
release: 1.oe2503
summary: Open vSwitch daemon/database/utilities
url: https://www.openvswitch.org/
rpm_license: ASL 2.0 and LGPLv2+ and SISSL
rpm_group: Unspecified
rpm_buildhost: 4e8072d8abde
rpm_sourcerpm: openvswitch-3.3.1-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openvswitch-3.3.1-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Open vSwitch provides standard network bridging functions and
  support for the OpenFlow protocol for remote per-flow control of
  traffic.


pkgId: fbd5152bf3935e95aac7cbe399438c7594dd1704fa22cb8ba004ad0278925aa7
name: openvswitch-devel
arch: riscv64
version: 3.3.1
epoch: 0
release: 1.oe2503
summary: Open vSwitch OpenFlow development package (library, headers)
url: https://www.openvswitch.org/
rpm_license: ASL 2.0
rpm_group: Unspecified
rpm_buildhost: 4e8072d8abde
rpm_sourcerpm: openvswitch-3.3.1-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openvswitch-devel-3.3.1-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This provides shared library, libopenswitch.so and the openvswitch header
  files needed to build an external application.


pkgId: 863f92ce09429e301182b7369b95c9b6b5f6bfca6875072a161c4018401e26e6
name: openvswitch-testcontroller
arch: riscv64
version: 3.3.1
epoch: 0
release: 1.oe2503
summary: Simple controller for testing OpenFlow setups
url: https://www.openvswitch.org/
rpm_license: ASL 2.0
rpm_group: Unspecified
rpm_buildhost: 4e8072d8abde
rpm_sourcerpm: openvswitch-3.3.1-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openvswitch-testcontroller-3.3.1-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This controller enables OpenFlow switches that connect to it to act as
  MAC-learning Ethernet switches.
  It can be used for initial testing of OpenFlow networks.
  It is not a necessary or desirable part of a production OpenFlow deployment.


pkgId: 6b1e7e7b5a910b99cbe47574a9a54f49bc759bdafb9a7df525c0faf8979ad545
name: openwebbeans
arch: noarch
version: 1.2.8
epoch: 0
release: 2.oe2503
summary: Implementation of the JSR-299 WebBeans
url: http://openwebbeans.apache.org/
rpm_license: ASL 2.0
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: openwebbeans-1.2.8-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openwebbeans-1.2.8-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  OpenWebBeans is an implementation of the JSR-299, Contexts and
  Dependency Injection for the Java EE platform.
  It also already incorporates some features which are part of JSR-346
  but doesn't need API changes as we still use the JCDI-1.0 API. The
  incorporated CDI-1.1 features are mostly parts which are not well defined
  in the CDI-1.0 specification, like Serialisation checks, etc.


pkgId: 317c184d2b2cc70528dd97646c2dd180fcc47344ab3cac32687e044d61a614e5
name: openwebbeans-test
arch: noarch
version: 1.2.8
epoch: 0
release: 2.oe2503
summary: Apache OpenWebBeans CDI Test Framework
url: http://openwebbeans.apache.org/
rpm_license: ASL 2.0
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: openwebbeans-1.2.8-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openwebbeans-test-1.2.8-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This package contains testing support for CDI containers and
  also provides an implementation for OpenWebBeans.


pkgId: ab596e8a88353257f469eaef755fcaf41d191d123d7ef7eaffda5dc29d0a92af
name: openwsman-winrs
arch: riscv64
version: 2.7.2
epoch: 0
release: 1.oe2503
summary: Windows Remote Shell
url: http://www.openwsman.org/
rpm_license: BSD-3-Clause and MIT
rpm_group: Unspecified
rpm_buildhost: a1bf5fd1810a
rpm_sourcerpm: openwsman-2.7.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/openwsman-winrs-2.7.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This is a command line tool for the Windows Remote Shell protocol.
  You can use it to send shell commands to a remote Windows hosts.


pkgId: a9ea22985137c6ebbdc4a4c8ef55299d8e07e16f5654ef95ddd1b5287d3368df
name: options
arch: noarch
version: 1.7
epoch: 0
release: 1.oe2503
summary: Library for managing sets of JVM properties to configure an app or library
url: https://github.com/headius/options
rpm_license: Apache-2.0
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: options-1.7-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/options-1.7-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  Provides a simple mechanism for defining JVM property-based
  configuration for an application or library.


pkgId: 8e1f100589facf70af43d5de923e5c02a0485e390188182752cc212837554c28
name: optipng
arch: riscv64
version: 0.7.8
epoch: 0
release: 1.oe2503
summary: PNG optimizer and converter
url: http://optipng.sourceforge.net/
rpm_license: Zlib
rpm_group: Unspecified
rpm_buildhost: 52b38c7539d5
rpm_sourcerpm: optipng-0.7.8-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/optipng-0.7.8-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  OptiPNG is a PNG optimizer that recompresses image files to a smaller size,
  without losing any information. This program also converts external formats
  (BMP, GIF, PNM and TIFF) to optimized PNG, and performs PNG integrity checks
  and corrections.


pkgId: 085de501ad272186a161db26dc4e3a8ae8cd26382a657d091627cc7a59bf7db5
name: opus
arch: riscv64
version: 1.5.2
epoch: 0
release: 1.oe2503
summary: An audio codec for use in low-delay speech and audio communication
url: https://www.opus-codec.org/
rpm_license: BSD-3-Clause
rpm_group: Unspecified
rpm_buildhost: 8cc7b2ccb591
rpm_sourcerpm: opus-1.5.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/opus-1.5.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Opus is unmatched for interactive speech and music transmission over the
  Internet, but is also intended for storage and streaming applications. It is
  standardized by the Internet Engineering Task Force (IETF) as RFC 6716 which
  incorporated technology from Skype’s SILK codec and Xiph.Org’s CELT codec.


pkgId: e1d4110903e860a80b16a4e355aa817c55e303782f41d26bbf412fca06db4108
name: opusfile
arch: riscv64
version: 0.12
epoch: 0
release: 3.oe2503
summary: A high-level API provides seeking, decode, and playback of Opus streams
url: https://www.opus-codec.org/
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: 264544fc789d
rpm_sourcerpm: opusfile-0.12-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/opusfile-0.12-3.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The opusfile library provides seeking, decode, and playback of Opus streams in the Ogg
  container (.opus files) including over http(s) on posix and windows systems.
  opusfile depends on libopus and libogg.The included opusurl library for http(s) access
  depends on opusfile and openssl.


pkgId: 947a82d1e059db81133f9443ba1da09b535ffb94dcea3f1a79cec06bfb5a59a8
name: orc
arch: riscv64
version: 0.4.40
epoch: 0
release: 1.oe2503
summary: The Oil Run-time Compiler
url: https://gstreamer.freedesktop.org/
rpm_license: BSD-2-Clause AND BSD-3-Clause
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-11
rpm_sourcerpm: orc-0.4.40-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/orc-0.4.40-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Orc is the sucessor to Liboil - The Library of Optimized Inner Loops.
  Orc is a library and set of tools for compiling and executing very
  simple programs that operate on arrays of data.  The "language" is
  a generic assembly language that represents many of the features
  available in SIMD architectures, including saturated addition and
  subtraction, and many arithmetic operations.


pkgId: 9ff1ea1c8a2aac2b04ba364b6df1362dfc8d34e761689443d80a4a2d8d966ae7
name: orca
arch: noarch
version: 46.0
epoch: 0
release: 2.oe2503
summary: Assistive technology for people with visual impairments
url: https://wiki.gnome.org/Projects/Orca
rpm_license: LGPLv2+
rpm_group: Unspecified
rpm_buildhost: f8c01b28da7d
rpm_sourcerpm: orca-46.0-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/orca-46.0-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  Orca is a screen reader that provides access to the graphical desktop via user-customizable combinations of speech and/or braille.
  Orca works with applications and toolkits that support the assistive technology service provider interface (AT-SPI), e.g. the GNOME desktop.


pkgId: 984c986d03df898a10f605d2e76b3840dcd7686c00dae4f7b82dacf97b69088e
name: os-maven-plugin
arch: noarch
version: 1.5.0
epoch: 0
release: 2.oe2503
summary: Maven plugin for generating platform-dependent properties
url: https://github.com/trustin/os-maven-plugin/
rpm_license: ASL 2.0
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: os-maven-plugin-1.5.0-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/os-maven-plugin-1.5.0-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  os-maven-plugin is a Maven extension/plugin that generates various
  useful platform-dependent project properties normalized from
  ${os.name} and ${os.arch}.

  ${os.name} and ${os.arch} are often subtly different between JVM and
  operating system versions or they sometimes contain machine-unfriendly
  characters such as whitespaces. This plugin tries to remove such
  fragmentation so that you can determine the current operating system
  and architecture reliably.


pkgId: 6d381ebe21168acaefa74ce87ebebef93f8591f88f81b41c22f5685c12c8531a
name: os-prober
arch: riscv64
version: 1.81
epoch: 0
release: 1.oe2503
summary: Probe disks on the system for other operating systems
url: http://kitenet.net/~joey/code/os-prober/
rpm_license: GPLv2+ and GPL+
rpm_group: Unspecified
rpm_buildhost: e938037c2728
rpm_sourcerpm: os-prober-1.81-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/os-prober-1.81-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Os-prober can probe disks on the system for other operating systems,
  and add them to the boot loader, so that installing current OS doesn't
  make your other installed OS hard to boot.


pkgId: fc0b05377684571026fc23011c5eb2d77423a647f8b2a3fb6cfd2772811884df
name: osc
arch: noarch
version: 1.11.1
epoch: 0
release: 1.oe2503
summary: The Command Line Interface to work with an Open Build Service
url: https://github.com/openSUSE/osc
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: ea4c293d57cf
rpm_sourcerpm: osc-1.11.1-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/osc-1.11.1-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  The osc is an opensuse-commander with svn like handling.
  It's a command line interface to work with an Open Build Service.


pkgId: 7a7a0e69146a7b1b66aea18dec1555622b37591a3961c7637dc72ba9c63a43c2
name: oscap-anaconda-addon
arch: noarch
version: 1.2.1
epoch: 0
release: 1.oe2503
summary: Anaconda addon integrating OpenSCAP to the installation process
url: https://github.com/OpenSCAP/oscap-anaconda-addon
rpm_license: GPLv2+
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-10
rpm_sourcerpm: oscap-anaconda-addon-1.2.1-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/oscap-anaconda-addon-1.2.1-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  This is an addon that integrates OpenSCAP utilities with the Anaconda installer
  and allows installation of systems following restrictions given by a SCAP
  content.


pkgId: 3599a1c3c6e6791a06fb87312c37e176d534cee0678e763e26adf42678509450
name: oscilloscope
arch: noarch
version: 0.19
epoch: 0
release: 2.oe2503
summary: Generic graphical signal plotting tool
url: https://rt.wiki.kernel.org/index.php/Tuna
rpm_license: GPLv2
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: tuna-0.19-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/oscilloscope-0.19-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  Plot stream of values read from standard input on the screen,
  along with statistics and histograms.

  Allows instant viewing of how signal generators (e.g. loop tests,
  signaltests or even pings) react when using tuna or regular
  chrt & taskket to change their scheduling strategy or real-time priorities.


pkgId: bf2ec895e7403e30ca01d76af98ad2463b874eb3990d7e3787bb5c7bef3fc816
name: osinfo-db
arch: noarch
version: 20240701
epoch: 0
release: 1.oe2503
summary: osinfo database files
url: http://libosinfo.org/
rpm_license: GPL-2.0-or-later
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-10
rpm_sourcerpm: osinfo-db-20240701-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/osinfo-db-20240701-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  osinfo-db provides the database files for use with the libosinfo
  library. It provides information about guest operating systems for
  use with virtualization provisioning tools.


pkgId: 54304887f174f112bacf852aebaacfcf936770822bbd67c92800218d6d4b62f1
name: osinfo-db-tools
arch: riscv64
version: 1.12.0
epoch: 0
release: 2.oe2503
summary: Tools to manage the osinfo database
url: https://libosinfo.org/
rpm_license: GPL-2.0-or-later
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-10
rpm_sourcerpm: osinfo-db-tools-1.12.0-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/osinfo-db-tools-1.12.0-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Osinfo-db-tools contains set of tools to assist administrators and
  developers in managing the osinfo database.


pkgId: 6bbaafcbf229fa69450d4a4995a9fc71ad0768cfe53472afc660bd155d7d2491
name: ostree
arch: riscv64
version: 2025.1
epoch: 0
release: 3.oe2503
summary: A tool like git for operating system binaries
url: https://ostreedev.github.io/ostree/
rpm_license: LGPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: c68f5fd504af
rpm_sourcerpm: ostree-2025.1-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/ostree-2025.1-3.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This project is now known as "libostree", though it is still appropriate to use the previous name: "OSTree"
  (or "ostree"). The focus is on projects which use libostree's shared library, rather than users directly
  invoking the command line tools (except for build systems). However, in most of the rest of the documentation,
  we will use the term "OSTree", since it's slightly shorter, and changing all documentation at once is impractical.


pkgId: cae495d713fa8503fb55d06f2113ed7c9165f4ce4ec3b8058362e629f023221e
name: overpass-fonts
arch: noarch
version: 3.0.5
epoch: 0
release: 2.oe2503
summary: Overpass fonts
url: https://github.com/RedHatBrand/overpass/
rpm_license: OFL-1.1 or LGPLv2+
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: overpass-fonts-3.0.5-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/overpass-fonts-3.0.5-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This package provides free and open source overpass fonts.It is based on the U.S.
  interstate highway road signage type system.


pkgId: 6e13c4b8d9bb9a5d301a74e97d7da811f21c87fc705675777b8715fa7e2f5e55
name: overpass-mono-fonts
arch: noarch
version: 3.0.5
epoch: 0
release: 2.oe2503
summary: Monospace overpass fonts
url: https://github.com/RedHatBrand/overpass/
rpm_license: OFL-1.1 or LGPLv2+
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: overpass-fonts-3.0.5-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/overpass-mono-fonts-3.0.5-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This package provides free and open source overpass fonts.It is based on the U.S.
  interstate highway road signage type system.It is monospace font.


pkgId: 01463616b4d57f9d1c26ab30944df415cfa0e71d0a6297487a1c3bbfe4c61745
name: p11-kit
arch: riscv64
version: 0.25.5
epoch: 0
release: 1.oe2503
summary: Provides a way to load and enumerate PKCS#11 modules.
url: https://p11-glue.freedesktop.org/p11-kit.html
rpm_license: BSD-3-Clause
rpm_group: Unspecified
rpm_buildhost: 7c0adab6e83e
rpm_sourcerpm: p11-kit-0.25.5-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/p11-kit-0.25.5-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Provides a way to load and enumerate PKCS#11 modules.
  Provides a standard configuration setup for installing
  PKCS#11 modules in such a way that they're discoverable.
  Also solves problems with coordinating the use of PKCS#11
  by different components or libraries living in the same process.


pkgId: 7b63b44a0aed46677688ead0d2521ac9b6f3f54f1cdf212ae43eaf7c8ad29847
name: p11-kit-server
arch: riscv64
version: 0.25.5
epoch: 0
release: 1.oe2503
summary: Server and client commands for p11-kit
url: https://p11-glue.freedesktop.org/p11-kit.html
rpm_license: BSD-3-Clause
rpm_group: Unspecified
rpm_buildhost: 7c0adab6e83e
rpm_sourcerpm: p11-kit-0.25.5-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/p11-kit-server-0.25.5-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The p11-kit-server package contains command line tools that enable to
  export PKCS#11 modules through a Unix domain socket.  Note that this
  feature is still experimental.


pkgId: e414a0c028f49fe5e5526cdc14c67905558ace7084d47ad379d1723492623627
name: pacemaker
arch: riscv64
version: 2.1.8
epoch: 0
release: 9.oe2503
summary: Scalable High-Availability cluster resource manager
url: https://www.clusterlabs.org/
rpm_license: GPL-2.0-or-later AND LGPL-2.1-or-later
rpm_group: Unspecified
rpm_buildhost: 4461558cee80
rpm_sourcerpm: pacemaker-2.1.8-9.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pacemaker-2.1.8-9.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Pacemaker is an advanced, scalable High-Availability cluster resource
  manager.

  It supports more than 16 node clusters with significant capabilities
  for managing resources and dependencies.

  It will run scripts at initialization, when machines go up or down,
  when related resources fail and can be configured to periodically check
  resource health.

  Available rpmbuild rebuild options:
    --with(out) : cibsecrets hardening nls pre_release profiling stonithd


pkgId: 9174e35548ac15f0f5902e076014caa66ceca3ae874dd5bb7f7b9706477a191f
name: pacemaker-cli
arch: riscv64
version: 2.1.8
epoch: 0
release: 9.oe2503
summary: Command line tools for controlling Pacemaker clusters
url: https://www.clusterlabs.org/
rpm_license: GPL-2.0-or-later AND LGPL-2.1-or-later
rpm_group: Unspecified
rpm_buildhost: 4461558cee80
rpm_sourcerpm: pacemaker-2.1.8-9.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pacemaker-cli-2.1.8-9.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Pacemaker is an advanced, scalable High-Availability cluster resource
  manager.

  The pacemaker-cli package contains command line tools that can be used
  to query and control the cluster from machines that may, or may not,
  be part of the cluster.


pkgId: 51317676ceccbb9f67f3cc05c49b04455bf33973b365daafc27a51755edb1f55
name: pacemaker-cluster-libs
arch: riscv64
version: 2.1.8
epoch: 0
release: 9.oe2503
summary: Cluster Libraries used by Pacemaker
url: https://www.clusterlabs.org/
rpm_license: GPL-2.0-or-later AND LGPL-2.1-or-later
rpm_group: Unspecified
rpm_buildhost: 4461558cee80
rpm_sourcerpm: pacemaker-2.1.8-9.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pacemaker-cluster-libs-2.1.8-9.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Pacemaker is an advanced, scalable High-Availability cluster resource
  manager.

  The pacemaker-cluster-libs package contains cluster-aware shared
  libraries needed for nodes that will form part of the cluster nodes.


pkgId: 160aec1f8d701ad92c74c03bcb3522ff857f5e8b1e4fff06353039d163b9fc92
name: pacemaker-doc
arch: noarch
version: 2.1.8
epoch: 0
release: 9.oe2503
summary: Documentation for Pacemaker
url: https://www.clusterlabs.org/
rpm_license: CC-BY-SA-4.0
rpm_group: Unspecified
rpm_buildhost: 4461558cee80
rpm_sourcerpm: pacemaker-2.1.8-9.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pacemaker-doc-2.1.8-9.oe2503.noarch.rpm
checksum_type: sha256
description:
  Documentation for Pacemaker.

  Pacemaker is an advanced, scalable High-Availability cluster resource
  manager.


pkgId: 7667cc665d4015f3faca1bfeafc28dbeef47f643d63e9e1631f918359d8fd541
name: pacemaker-libs
arch: riscv64
version: 2.1.8
epoch: 0
release: 9.oe2503
summary: Core Pacemaker libraries
url: https://www.clusterlabs.org/
rpm_license: GPL-2.0-or-later AND LGPL-2.1-or-later
rpm_group: Unspecified
rpm_buildhost: 4461558cee80
rpm_sourcerpm: pacemaker-2.1.8-9.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pacemaker-libs-2.1.8-9.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Pacemaker is an advanced, scalable High-Availability cluster resource
  manager.

  The pacemaker-libs package contains shared libraries needed for cluster
  nodes and those just running the CLI tools.


pkgId: 40dbb439b3146482e062e44745998424c954091cc8ae5a69c654e6fc8f818a96
name: pacemaker-libs-devel
arch: riscv64
version: 2.1.8
epoch: 0
release: 9.oe2503
summary: Pacemaker development package
url: https://www.clusterlabs.org/
rpm_license: GPL-2.0-or-later AND LGPL-2.1-or-later
rpm_group: Unspecified
rpm_buildhost: 4461558cee80
rpm_sourcerpm: pacemaker-2.1.8-9.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pacemaker-libs-devel-2.1.8-9.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Pacemaker is an advanced, scalable High-Availability cluster resource
  manager.

  The pacemaker-libs-devel package contains headers and shared libraries
  for developing tools for Pacemaker.


pkgId: 8f6d828680c7404ebbc62e44b80ae8bcd28092e53043e0c9738918e41d16e4fc
name: pacemaker-remote
arch: riscv64
version: 2.1.8
epoch: 0
release: 9.oe2503
summary: Pacemaker remote executor daemon for non-cluster nodes
url: https://www.clusterlabs.org/
rpm_license: GPL-2.0-or-later AND LGPL-2.1-or-later
rpm_group: Unspecified
rpm_buildhost: 4461558cee80
rpm_sourcerpm: pacemaker-2.1.8-9.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pacemaker-remote-2.1.8-9.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Pacemaker is an advanced, scalable High-Availability cluster resource
  manager.

  The pacemaker-remote package contains the Pacemaker Remote daemon
  which is capable of extending pacemaker functionality to remote
  nodes not running the full corosync/cluster stack.


pkgId: 5b875bc133ae7c3628075d5eb282e2019eef59c7277cc13e21a3e2fad805015b
name: pacemaker-schemas
arch: noarch
version: 2.1.8
epoch: 0
release: 9.oe2503
summary: Schemas and upgrade stylesheets for Pacemaker
url: https://www.clusterlabs.org/
rpm_license: GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: 4461558cee80
rpm_sourcerpm: pacemaker-2.1.8-9.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pacemaker-schemas-2.1.8-9.oe2503.noarch.rpm
checksum_type: sha256
description:
  Schemas and upgrade stylesheets for Pacemaker

  Pacemaker is an advanced, scalable High-Availability cluster resource
  manager.


pkgId: 6b8738f8bb20c17135fd151629b2dfb1fc50ecc130316c72f1e1a0cf0daac51a
name: pakchois
arch: riscv64
version: 0.4
epoch: 0
release: 20.oe2503
summary: The library wraped for PKCS#11
url: http://www.manyfish.co.uk/pakchois/
rpm_license: LGPLv2+
rpm_group: Unspecified
rpm_buildhost: e1ac35c88794
rpm_sourcerpm: pakchois-0.4-20.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pakchois-0.4-20.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The pakchois packaging library aims to provide an object-oriented C interface
  that does not hide any underlying interface and avoids dependencies on any
  cryptography toolkit. It is a PKCK#11 thin wapper libray.


pkgId: bad95903cb424ea9ed75fa75c2a6b29894398fe8fd613ba46b59a9b1abef842d
name: paktype-naqsh-fonts
arch: noarch
version: 6.0
epoch: 0
release: 1.oe2503
summary: Fonts for Arabic from PakType
url: https://sourceforge.net/projects/paktype/
rpm_license: GPLv2 with exceptions
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: paktype-naqsh-fonts-6.0-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/paktype-naqsh-fonts-6.0-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  This package provides paktype-naqsh fonts.It is free for distribution
  under GPL.You can read PakType_Naqsh_Features.pdf to find more information.


pkgId: 8d1eac995ac206e789c4bf7c93cfc2a1a9c7a758a0c6d0dfc21c85ce6b52f22c
name: paktype-naskh-basic-fonts
arch: noarch
version: 6.0
epoch: 0
release: 2.oe2503
summary: Font supporting Arabic Script
url: https://sourceforge.net/projects/paktype/
rpm_license: GPLv2 with exceptions
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-11
rpm_sourcerpm: paktype-naskh-basic-fonts-6.0-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/paktype-naskh-basic-fonts-6.0-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  Unicode based open source OpenType font supporting Arabic Script under the terms \
  of the GNU General Public License as published by the Free Software Foundation.


pkgId: ea3cc065a66b8f344543e942a3f1c6d22c8876376bc9ad188e707a4b59975e90
name: paktype-tehreer-fonts
arch: noarch
version: 6.0
epoch: 0
release: 1.oe2503
summary: Free font for Arabic
url: https://sourceforge.net/projects/paktype/
rpm_license: GPLv2 with exceptions
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: paktype-tehreer-fonts-6.0-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/paktype-tehreer-fonts-6.0-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  A collection of Unicode based open source OpenType fonts supporting Arabic Script
  under the terms of the GNU General Public License as published by the Free Software Foundation.


pkgId: 8825846c2ff957218295dd827b6813e5910db92a4321ee783ebe2448c6342f00
name: pam
arch: riscv64
version: 1.5.3
epoch: 0
release: 9.oe2503
summary: Pluggable Authentication Modules for Linux
url: http://www.linux-pam.org/
rpm_license: BSD-3-Clause AND GPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: db6ecbdd11e8
rpm_sourcerpm: pam-1.5.3-9.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pam-1.5.3-9.oe2503.riscv64.rpm
checksum_type: sha256
description:
  PAM (Pluggable Authentication Modules) is a system of libraries that
  handle the authentication tasks of applications (services) on the system.


pkgId: 55dbc1919762803d2560dcb9f8e6cba41bbb239dc309450ceff1c5c644065334
name: pam_krb5
arch: riscv64
version: 4.11
epoch: 0
release: 1.oe2503
summary: A Pluggable Authentication Module for Kerberos 5
url: https://github.com/rra/pam-krb5
rpm_license: MIT and BSD
rpm_group: System/Libraries
rpm_buildhost: d40d6a242655
rpm_sourcerpm: pam_krb5-4.11-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pam_krb5-4.11-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  pam-krb5 is a Kerberos v5 PAM module for either MIT Kerberos or
  Heimdal.  It supports ticket refreshing by screen savers, configurable
  authorization handling, authentication of non-local accounts for
  network services, password changing, and password expiration, as well
  as all the standard expected PAM features.  It works correctly with
  OpenSSH, even with ChallengeResponseAuthentication and
  PrivilegeSeparation enabled, and supports extensive configuration
  either by PAM options or in krb5.conf or both.  PKINIT is supported
  with recent versions of both MIT Kerberos and Heimdal and FAST is
  supported with recent MIT Kerberos.


pkgId: 5a0b48757b35fdec1454e42a75834682c2c2933de49c7a2de0028cd44f1974ef
name: pam_ssh_agent_auth
arch: riscv64
version: 0.10.4
epoch: 0
release: 4.5.oe2503
summary: PAM module for authentication with ssh-agent
url: http://www.openssh.com/portable.html
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: 757c152f7930
rpm_sourcerpm: openssh-9.6p1-5.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pam_ssh_agent_auth-0.10.4-4.5.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Provides PAM module for the use of authentication with ssh-agent. Through the use of the\
  forwarding of ssh-agent connection it also allows to authenticate with remote ssh-agent \
  instance. The module is most useful for su and sudo service stacks.


pkgId: 850e7708b50b3b48d2e84c1dc96fdbf66c1b812e88a6580fd04ad79f86701c80
name: pam_wrapper
arch: riscv64
version: 1.1.5
epoch: 0
release: 2.oe2503
summary: A tool to test PAM applications and PAM modules
url: http://cwrap.org/
rpm_license: GPL-3.0-or-later
rpm_group: Unspecified
rpm_buildhost: a57981f71e99
rpm_sourcerpm: pam_wrapper-1.1.5-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pam_wrapper-1.1.5-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This component of cwrap allows you to either test your PAM (Linux-PAM
  and OpenPAM) application or module.

  For testing PAM applications, simple PAM module called pam_matrix is
  included. If you plan to test a PAM module you can use the pamtest library,
  which simplifies testing of modules. You can combine it with the cmocka
  unit testing framework or you can use the provided Python bindings to
  write tests for your module in Python.


pkgId: ea53025ca7d13329347c9f77ceead33cb79c375d9f05c9c32c6665f99131c174
name: pango
arch: riscv64
version: 1.52.2
epoch: 0
release: 1.oe2503
summary: System for layout and rendering of internationalized text
url: https://pango.gnome.org/
rpm_license: LGPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: 2001e74f88b7
rpm_sourcerpm: pango-1.52.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pango-1.52.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Pango is a library for laying out and rendering of text, with an emphasis
  on internationalization. Pango can be used anywhere that text layout is needed,
  though most of the work on Pango so far has been done in the context of the
  GTK+ widget toolkit. Pango forms the core of text and font handling for GTK+.

  Pango is designed to be modular; the core Pango layout engine can be used
  with different font backends.

  The integration of Pango with Cairo provides a complete solution with high
  quality text handling and graphics rendering.


pkgId: f5ccd7b25037d662164580189ad749dee4febd83330109fdeb182feeb9440818
name: pango-devel
arch: riscv64
version: 1.52.2
epoch: 0
release: 1.oe2503
summary: Development files for pango
url: https://pango.gnome.org/
rpm_license: LGPL-2.0-or-later
rpm_group: Unspecified
rpm_buildhost: 2001e74f88b7
rpm_sourcerpm: pango-1.52.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pango-devel-1.52.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The pango-devel package includes the header files and developer documentation
  for the pango package.


pkgId: b1b992b1e72c1f05ae58e180b228e6941bde9454ebadac43b8ecccf1184ea767
name: papi
arch: riscv64
version: 7.1.0
epoch: 0
release: 3.oe2503
summary: Performance Application Programming Interface
url: http://icl.cs.utk.edu/papi/
rpm_license: BSD-3-clause
rpm_group: Unspecified
rpm_buildhost: 77adb83b1ee7
rpm_sourcerpm: papi-7.1.0-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/papi-7.1.0-3.oe2503.riscv64.rpm
checksum_type: sha256
description:
  PAPI provides a programmer interface to monitor the performance of
  running programs,and contains the run-time libraries for any application that wishes
  to use PAPI.


pkgId: 7d7c74280b5ccba2f6df3a07354b9308f85461401786c347c2a43f331e102ce1
name: papi-devel
arch: riscv64
version: 7.1.0
epoch: 0
release: 3.oe2503
summary: Header files for the compiling programs with PAPI
url: http://icl.cs.utk.edu/papi/
rpm_license: BSD-3-clause
rpm_group: Unspecified
rpm_buildhost: 77adb83b1ee7
rpm_sourcerpm: papi-7.1.0-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/papi-devel-7.1.0-3.oe2503.riscv64.rpm
checksum_type: sha256
description:
  PAPI-devel provides C header files for specifying PAPI user-space libraries and interfaces,
  a test testuiste for checking PAPI functionality, and static libraries for compiling programs with PAPI.


pkgId: 88451ed8ae00f6b891a421804272cfc7aa3cac5cfd959c9d6471f670e22df972
name: parallel
arch: noarch
version: 20241222
epoch: 0
release: 1.oe2503
summary: Shell tool for executing jobs in parallel
url: https://www.gnu.org/software/parallel/
rpm_license: GPL-3.0-or-later and GFDL-1.3-or-later
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-13
rpm_sourcerpm: parallel-20241222-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/parallel-20241222-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  GNU Parallel is a shell tool for executing jobs in parallel using one or more
  machines. A job is typically a single command or a small script that has to be
  run for each of the lines in the input. The typical input is a list of files, a
  list of hosts, a list of users, or a list of tables.

  If you use xargs today you will find GNU Parallel very easy to use. If you
  write loops in shell, you will find GNU Parallel may be able to replace most of
  the loops and make them run faster by running jobs in parallel. If you use ppss
  or pexec you will find GNU Parallel will often make the command easier to read.

  GNU Parallel also makes sure output from the commands is the same output as you
  would get had you run the commands sequentially. This makes it possible to use
  output from GNU Parallel as input for other programs.

  GNU Parallel is command-line-compatible with moreutils' parallel, but offers
  additional features.


pkgId: 977d310a9df928595a7bc702ea5205e7f2029fb06554c3bae57b3dacb6abaee2
name: paranamer
arch: noarch
version: 2.8
epoch: 0
release: 1.oe2503
summary: Library for accessing non-private method parameter names at run-time
url: https://github.com/paul-hammant/paranamer
rpm_license: BSD
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: paranamer-2.8-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/paranamer-2.8-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  It is a library that allows the parameter names of non-private methods
  and constructors to be accessed at run-time.


pkgId: c738c37487c0ef937f22440aefa30fd3355fcc7749b20886e16d9348ed91c05e
name: paratype-pt-sans-fonts
arch: noarch
version: 20141121
epoch: 0
release: 11.oe2503
summary: A pan-Cyrillic font
url: http://www.paratype.com/public/
rpm_license: OFL-1.1
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: paratype-pt-sans-fonts-20141121-11.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/paratype-pt-sans-fonts-20141121-11.oe2503.noarch.rpm
checksum_type: sha256
description:
  This package includes two narrows styles and the four basic styles fonts.these fonts is belong
  to PT Sans fonts family which is part of the “Public Types of Russian Federation” project.


pkgId: 0d46483eb01db37b7c04605b3b2eeb47876b1d176775a1b2e8d1867b285b1c1a
name: parboiled
arch: noarch
version: 1.1.6
epoch: 0
release: 17.oe2503
summary: A mixed Java/Scala library
url: http://parboiled.org/
rpm_license: ASL 2.0
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: parboiled-1.1.6-17.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/parboiled-1.1.6-17.oe2503.noarch.rpm
checksum_type: sha256
description:
  parboiled is a mixed Java/Scala library providing for lightweight and easy-to-use,
  yet powerful and elegant parsing of arbitrary input text based on Parsing expression
  grammars (PEGs). PEGs are an alternative to context free grammars (CFGs) for formally
  specifying syntax, they make a good replacement for regular expressions and generally
  have quite a few advantages over the "traditional" way of building parsers via CFGs.
  parboiled is released under the Apache License 2.0.


pkgId: e87809ee7abc01c7f336a3c83eeeab64badfb6243f7a407009f03ff5a4bfa564
name: parted
arch: riscv64
version: 3.6
epoch: 0
release: 1.oe2503
summary: The GNU disk partition manipulation program
url: https://www.gnu.org/software/parted/
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: 4cbdcc6504be
rpm_sourcerpm: parted-3.6-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/parted-3.6-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The GNU Parted program allows you to create, destroy, resize, move,
  and copy hard disk partitions. Parted can be used for creating space
  for new operating systems, reorganizing disk usage, and copying data
  to new hard disks.


pkgId: c778ae88fed26f162b1cb3a6baa9a7be98c0c51a09aa7344db8fb8fe79d03e44
name: parted-devel
arch: riscv64
version: 3.6
epoch: 0
release: 1.oe2503
summary: Files for developing apps which will manipulate disk partitions
url: https://www.gnu.org/software/parted/
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: 4cbdcc6504be
rpm_sourcerpm: parted-3.6-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/parted-devel-3.6-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The GNU Parted library is a set of routines for hard disk partition
  manipulation. If you want to develop programs that manipulate disk
  partitions and filesystems using the routines provided by the GNU
  Parted library, you need to install this package.


pkgId: 6ae5e6eada9e3a80517c1c315eb127bb4fc940493ec0feeec478a45536c064f7
name: passenger
arch: riscv64
version: 6.0.22
epoch: 0
release: 2.oe2503
summary: Phusion Passenger application server
url: https://www.phusionpassenger.com
rpm_license: Boost and BSD and MIT and zlib
rpm_group: Unspecified
rpm_buildhost: 0620bb945de5
rpm_sourcerpm: passenger-6.0.22-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/passenger-6.0.22-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Phusion Passenger® is a web server and application server, designed to be fast,
  robust and lightweight. It takes a lot of complexity out of deploying web apps,
  adds powerful enterprise-grade features that are useful in production,
  and makes administration much easier and less complex. It supports Ruby,
  Python, Node.js and Meteor.


pkgId: 3ac8af7187e45816e9fec59dae3cd49fe19d857e12e19394239c7348bf3eccfc
name: passenger-devel
arch: riscv64
version: 6.0.22
epoch: 0
release: 2.oe2503
summary: Phusion Passenger development files
url: https://www.phusionpassenger.com
rpm_license: Boost and BSD and MIT and zlib
rpm_group: Unspecified
rpm_buildhost: 0620bb945de5
rpm_sourcerpm: passenger-6.0.22-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/passenger-devel-6.0.22-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains development files for Phusion Passenger®. Installing this
  package allows it to compile native extensions for non-standard Ruby interpreters,
  and allows Passenger Standalone to use a different Nginx core version.


pkgId: c02e3fd9f0af5e722590ce5ec49df9b8ee53dc6a3e01d0adecb6cac15fb06961
name: passwd
arch: riscv64
version: 0.80
epoch: 0
release: 11.oe2503
summary: An implementation of the password setting/changing utility through PAM and libuser libraries
url: https://pagure.io/passwd
rpm_license: BSD or GPL+
rpm_group: Unspecified
rpm_buildhost: c7eabfb97552
rpm_sourcerpm: passwd-0.80-11.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/passwd-0.80-11.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The package contains an implementation of the password
  setting/changing utility through PAM(Pluggable Authentication
  Modules) and libuser libraries.


pkgId: 7798e35fffff21103194202bfffdd89d723c6422bcd66d8ce20efb1066c09195
name: patch
arch: riscv64
version: 2.7.6
epoch: 0
release: 22.oe2503
summary: Utiliity which applies a patch file to original files.
url: http://www.gnu.org/software/patch/patch.html
rpm_license: GPLv3+
rpm_group: Unspecified
rpm_buildhost: c2f587055595
rpm_sourcerpm: patch-2.7.6-22.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/patch-2.7.6-22.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Patch takes a patch file containing a difference listing produced by the
  diff program and applies those differences to one or more original files,
  producing patched versions.


pkgId: 08ef5e8f668bc8aec7f3302e92adc83dedf949a6ac8204245b5a0e6b33d65eb9
name: patchelf
arch: riscv64
version: 0.16.0
epoch: 0
release: 2.oe2503
summary: A utility for patching ELF binaries
url: http://nixos.org/patchelf.html
rpm_license: GPL-3.0
rpm_group: Unspecified
rpm_buildhost: b82568b38ec9
rpm_sourcerpm: patchelf-0.16.0-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/patchelf-0.16.0-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  PatchELF is a simple utility for modifying an existing ELF executable
  or library.  It can change the dynamic loader ("ELF interpreter")
  of an executable and change the RPATH of an executable or library.


pkgId: afd125ce1ab776f122cbdea0b07458d557dbdabf3f41e4b2a5034c0f3b309849
name: patchutils
arch: riscv64
version: 0.4.2
epoch: 0
release: 1.oe2503
summary: A small collection of programs that operate on patch files
url: http://cyberelk.net/tim/patchutils/
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: 28b629e501f9
rpm_sourcerpm: patchutils-0.4.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/patchutils-0.4.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This is a collection of programs that can manipulate patch files in a variety of ways,
  such as interpolating between two pre-patches, combining two incremental patches, fixing
  line numbers in manually edited patches, and only listing modifications by patches document.


pkgId: 05878c6d3dc2a0542c0ef22233cacfac592e5ff17ee97eacb6edd9183fdaf036
name: pavucontrol
arch: riscv64
version: 5.0
epoch: 0
release: 1.oe2503
summary: The volume control of PulseAudio
url: http://freedesktop.org/software/pulseaudio/pavucontrol
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: d43feb04ed76
rpm_sourcerpm: pavucontrol-5.0-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pavucontrol-5.0-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  PulseAudio Volume Control (pavucontrol) is a simple GTK based volume control
  tool ("mixer") for the PulseAudio sound server. In contrast to classic mixer
  tools this one allows you to control both the volume of hardware devices and
  of each playback stream separately.


pkgId: d4681fe85089bbcce2c35507d6e8d556226629600d9de2f1adbc069d99c9ec1a
name: pax
arch: riscv64
version: 3.4
epoch: 0
release: 36.oe2503
summary: POSIX File System Archiver
url: http://repository.timesys.com/buildsources/p
rpm_license: BSD
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-11
rpm_sourcerpm: pax-3.4-36.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pax-3.4-36.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Pax is the POSIX standard archive tool. It supports the two most common
  forms of standard archive (backup) files - CPIO and TAR.


pkgId: 7f804f587f192e7e08995e15860715e106133951546fa0b5314d4a8b3050a166
name: pbzip2
arch: riscv64
version: 1.1.13
epoch: 0
release: 3.oe2503
summary: Parallel implementation of the bzip2 block-sorting file compressor
url: http://www.compression.ca/pbzip2/
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: 9a58a989d905
rpm_sourcerpm: pbzip2-1.1.13-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pbzip2-1.1.13-3.oe2503.riscv64.rpm
checksum_type: sha256
description:
  PBZIP2 is a parallel implementation of the bzip2 block-sorting file compressor.
  The output of this version should be fully compatible with bzip2 v1.0.2 or newer
  (ie: anything compressed with pbzip2 can be decompressed with bzip2).


pkgId: 8f133243341a7a2f5517f916b8879248728b3cf3cf48515cdb577256ef4a19d2
name: pciutils
arch: riscv64
version: 3.13.0
epoch: 0
release: 1.oe2503
summary: PCI bus related utilities
url: http://atrey.karlin.mff.cuni.cz/~mj/pciutils.shtml
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: 462593dd8199
rpm_sourcerpm: pciutils-3.13.0-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pciutils-3.13.0-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The PCI Utilities are a collection of programs for inspecting and manipulating configuration
  of PCI devices, all based on a common portable library libpci which offers access to the PCI
  configuration space on a variety of operating systems.

  The utilities include:
  lspci
      displays detailed information about all PCI buses and devices in the system
  setpci
      allows reading from and writing to PCI device configuration registers. For example, you
      can adjust the latency timers with it.


pkgId: 832c79f8b3287418144b3bbb65d881a5323270c65b1f7938b21f19df4c81002c
name: pciutils-devel
arch: riscv64
version: 3.13.0
epoch: 0
release: 1.oe2503
summary: Library and Include Files of the PCI utilities
url: http://atrey.karlin.mff.cuni.cz/~mj/pciutils.shtml
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: 462593dd8199
rpm_sourcerpm: pciutils-3.13.0-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pciutils-devel-3.13.0-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the files that are necessary for software
  development using the PCI utilities.


pkgId: fb8fadbf1d22aaf130edbc01da9aa9983317e16d1f601bb4f215d3006a74add2
name: pcp
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: System-level performance monitoring and performance management
url: https://pcp.io
rpm_license: GPL-2.0-or-later AND LGPL-2.1-or-later AND CC-BY-3.0
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Performance Co-Pilot (PCP) provides a framework and services to support
  system-level performance monitoring and performance management.

  The PCP open source release provides a unifying abstraction for all of
  the interesting performance data in a system, and allows client
  applications to easily retrieve and process any subset of that data.


pkgId: 5404d491ac9f76fc97289c904aa9f712cd0d874dfdc0c9d0597968f6da1b77e7
name: pcp-export-pcp2elasticsearch
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot tools for exporting PCP metrics to ElasticSearch
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-export-pcp2elasticsearch-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Performance Co-Pilot (PCP) front-end tools for exporting metric values
  to Elasticsearch - a distributed, RESTful search and analytics engine.
  See https://www.elastic.co/community for further details.


pkgId: f7333097e595eb20de5f4b40b062370b7eaa6d399144b53decdf555ee638cd8a
name: pcp-export-pcp2graphite
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot tools for exporting PCP metrics to Graphite
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-export-pcp2graphite-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Performance Co-Pilot (PCP) front-end tools for exporting metric values
  to graphite (http://graphite.readthedocs.org).


pkgId: da89803add7c55c02948ccf2940b832fa786ef8d2bec9425f6787e2a74901b87
name: pcp-export-pcp2influxdb
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot tools for exporting PCP metrics to InfluxDB
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-export-pcp2influxdb-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Performance Co-Pilot (PCP) front-end tools for exporting metric values
  to InfluxDB (https://influxdata.com/time-series-platform/influxdb).


pkgId: cf7cdd1641af19b213a6cca4d32b98e2107f80a0c147f8bb9a7bd9727ebab4ee
name: pcp-export-pcp2openmetrics
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot tools for exporting PCP metrics in OpenMetrics format
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-export-pcp2openmetrics-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Performance Co-Pilot (PCP) front-end tools for exporting metric values
  in OpenMetrics (https://openmetrics.io/) format.


pkgId: ef9035e04082d76a85d3c59ae69447d4b94665f5d35e01333c09dea0da1347b2
name: pcp-export-pcp2spark
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot tools for exporting PCP metrics to Apache Spark
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-export-pcp2spark-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Performance Co-Pilot (PCP) front-end tools for exporting metric values
  in JSON format to Apache Spark. See https://spark.apache.org/ for
  further details on Apache Spark.


pkgId: fea463465362974bba4a7bbbc2ddc1b5ad554bf6f341f221d5bd494197ea4961
name: pcp-export-pcp2zabbix
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot tools for exporting PCP metrics to Zabbix
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-export-pcp2zabbix-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Performance Co-Pilot (PCP) front-end tools for exporting metric values
  to the Zabbix (https://www.zabbix.org/) monitoring software.


pkgId: 68fa0a3b6462c727af2f091d8bf2df3eb4a8f9ca5b9fdeed3c481ababf78019c
name: pcp-export-zabbix-agent
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Module for exporting PCP metrics to Zabbix agent
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-export-zabbix-agent-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Performance Co-Pilot (PCP) module for exporting metrics from PCP to
  Zabbix via the Zabbix agent - see zbxpcp(3) for further details.


pkgId: 5b834d50304f8f93b7a150b189630804b5e11f50e1ff8eee308e7b1e6c5abe2f
name: pcp-geolocate
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot geographical location metric labels
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-geolocate-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Performance Co-Pilot (PCP) tools that automatically apply metric labels
  containing latitude and longitude, based on IP-address-based lookups.
  Used with live maps to show metric values from different locations.


pkgId: 7adc1011a39557dc53ef4f33cfda913753fdf60c93e7339aab984d854a2118f8
name: pcp-gui
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Visualization tools for the Performance Co-Pilot toolkit
url: https://pcp.io
rpm_license: GPL-2.0-or-later AND LGPL-2.1-or-later AND LGPL-2.1-or-later WITH Qwt-exception-1.0
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-gui-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Visualization tools for the Performance Co-Pilot toolkit.
  The pcp-gui package primarily includes visualization tools for
  monitoring systems using live and archived Performance Co-Pilot
  (PCP) sources.


pkgId: 0e1eca0df9e9556f12efa1683bbb4044ba2686ef0d30e2e29564ac43a6770f62
name: pcp-help
arch: noarch
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Documentation and tutorial for the Performance Co-Pilot
url: https://pcp.io
rpm_license: GPL-2.0-or-later AND CC-BY-3.0
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-help-6.3.2-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  Documentation and tutorial for the Performance Co-Pilot
  Performance Co-Pilot (PCP) provides a framework and services to support
  system-level performance monitoring and performance management.

  The pcp-doc package provides useful information on using and
  configuring the Performance Co-Pilot (PCP) toolkit for system
  level performance management.  It includes tutorials, HOWTOs,
  and other detailed documentation about the internals of core
  PCP utilities and daemons, and the PCP graphical tools.


pkgId: 9e8b52011115f83d262eed56c22dd746d6a34c118549a565245818368db5e35c
name: pcp-import-collectl2pcp
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot tools for importing collectl log files into PCP archive logs
url: https://pcp.io
rpm_license: LGPL-2.1-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-import-collectl2pcp-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Performance Co-Pilot (PCP) front-end tools for importing collectl data
  into standard PCP archive logs for replay with any PCP monitoring tool.


pkgId: 5b2b50118998b1a9757171ff5182bba75701f43605237d323a56d1fc71ade754
name: pcp-import-ganglia2pcp
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot tools for importing ganglia data into PCP archive logs
url: https://pcp.io
rpm_license: LGPL-2.1-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-import-ganglia2pcp-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Performance Co-Pilot (PCP) front-end tools for importing ganglia data
  into standard PCP archive logs for replay with any PCP monitoring tool.


pkgId: b121a3ac27a26fea94e016877dc78dc86881b9353943e1e53e40713323c55c62
name: pcp-import-iostat2pcp
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot tools for importing iostat data into PCP archive logs
url: https://pcp.io
rpm_license: LGPL-2.1-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-import-iostat2pcp-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Performance Co-Pilot (PCP) front-end tools for importing iostat data
  into standard PCP archive logs for replay with any PCP monitoring tool.


pkgId: 376c27cb731bd54cc82b6759c1a05ada9792ef4300c147ecf44fed3b619519cc
name: pcp-import-mrtg2pcp
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot tools for importing MTRG data into PCP archive logs
url: https://pcp.io
rpm_license: LGPL-2.1-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-import-mrtg2pcp-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Performance Co-Pilot (PCP) front-end tools for importing MTRG data
  into standard PCP archive logs for replay with any PCP monitoring tool.


pkgId: 4e74534952c0174b91c8b9229a4bcd423c1c491092b1d8838c1f1259e8976a62
name: pcp-import-sar2pcp
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot tools for importing sar data into PCP archive logs
url: https://pcp.io
rpm_license: LGPL-2.1-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-import-sar2pcp-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Performance Co-Pilot (PCP) front-end tools for importing sar data
  into standard PCP archive logs for replay with any PCP monitoring tool.


pkgId: ac8ee70eab76a8bea731ff3cee0d2eba37b422c4314a245b93cf9247f310f241
name: pcp-pmda-activemq
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for ActiveMQ
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-activemq-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about the ActiveMQ message broker.


pkgId: 4f95f266c189e2b544a491786fa4fcfe552d19834a250d37c198944bcce24691
name: pcp-pmda-amdgpu
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics from AMD GPU devices
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-amdgpu-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  extracting performance metrics from AMDGPU devices.


pkgId: a59945581169b1b52d747475e79c9a627359b0a2f082beaa6a5c770b0bd3a093
name: pcp-pmda-apache
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for the Apache webserver
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-apache-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about the Apache webserver.


pkgId: 34b73c9e02580198f7436ef33447fb1c97c308592ed49f8cc975605eec2186b9
name: pcp-pmda-bash
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for the Bash shell
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-bash-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about the Bash shell.


pkgId: b8738de214be56f8400910ce76ca68c4905784396475a5c7e64ea19fb84e795a
name: pcp-pmda-bcc
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics from eBPF/BCC modules
url: https://pcp.io
rpm_license: Apache-2.0 AND GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-bcc-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  extracting performance metrics from eBPF/BCC Python modules.


pkgId: 920e35bf63a5256b1fc9c77fb69d6c0870b193e24ae29e1aeb574e87e54448e2
name: pcp-pmda-bind2
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for BIND servers
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-bind2-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics from BIND (Berkeley Internet Name Domain).


pkgId: b70bae1c56eb708c40dda980dcdf77f7627d31c7710539f1236e00a5a0090287
name: pcp-pmda-bonding
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for Bonded network interfaces
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-bonding-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about bonded network interfaces.


pkgId: 26b5c4f6a5371d68ef1c1c3add6a57457e5e5a66e5dd0bcfe47c5962a27270be
name: pcp-pmda-bpf
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics from eBPF ELF modules
url: https://pcp.io
rpm_license: Apache-2.0 AND GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-bpf-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  extracting performance metrics from eBPF ELF modules.


pkgId: 62d0b88a761c1895497980eba4b1da2a92e2128633dad12c5830b90be93608aa
name: pcp-pmda-bpftrace
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics from bpftrace scripts
url: https://pcp.io
rpm_license: Apache-2.0 AND GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-bpftrace-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  extracting performance metrics from bpftrace scripts.


pkgId: 4c4e3b7e1d59d28328089201c0f820a99013780f81291b489d57ab7d8a00111b
name: pcp-pmda-cifs
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for the CIFS protocol
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-cifs-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about the Common Internet Filesytem.


pkgId: 3d2a5a4b63ade2c5edecc46b0f60c4c971242ac25dfedec684e4ddd30491ef48
name: pcp-pmda-cisco
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for Cisco routers
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-cisco-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about Cisco routers.


pkgId: b2fc3d3c59ec078bc6b5b9348852a6a90d9604359d56866533c2c7ac8b483cf2
name: pcp-pmda-dbping
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for Database response times and Availablility
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-dbping-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about the Database response times and Availablility.


pkgId: 28b6b66ee916eae63ff77d67017866aa91eb033cf8921e794580cae1421ea75a
name: pcp-pmda-denki
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics dealing with electrical power
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-denki-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics related to the electrical power consumed by and inside
  the system.


pkgId: 60091b9ff0d4d36035027d8d59f9d9da9827954f6db9fb80b7750d4798a52a5b
name: pcp-pmda-dm
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for the Device Mapper Cache and Thin Client
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-dm-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about the Device Mapper Cache and Thin Client.


pkgId: 14664f756aa25a9428b561d4f4bb7ccc319185460874e726baa5f5506b6bbeca
name: pcp-pmda-docker
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics from the Docker daemon
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-docker-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics using the Docker daemon REST API.


pkgId: 5095d243a6ac39543f135ba15b7faade7e0546afc40839c1024dda5a927fc405
name: pcp-pmda-ds389
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for 389 Directory Servers
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-ds389-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about a 389 Directory Server.


pkgId: d067db99292cafd571b5f8328436bcbc7f5523e1201f30ab535b9f0ef9e5147e
name: pcp-pmda-ds389log
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for 389 Directory Server Loggers
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-ds389log-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics from a 389 Directory Server log.


pkgId: fd017149ebe316c10f8fba5c4d4192d9c93694cd0e7eff31f036db02da62aef0
name: pcp-pmda-elasticsearch
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for Elasticsearch
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-elasticsearch-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about Elasticsearch.


pkgId: 94c7624135dc7b2300c6663d52584cdca0ea4f4b35a79c6047ab1a4163eee50d
name: pcp-pmda-farm
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for Seagate FARM Log metrics
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-farm-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metric Domain Agent (PMDA) for
  collecting metrics from Seagate Hard Drive vendor specific Field Accessible
  Reliability Metrics (FARM) Log making use of data from the smartmontools
  package.


pkgId: 98b29a155eeef1f87f9c394e76c94759112a09fe3488ab28c52f9402b8037e50
name: pcp-pmda-gfs2
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for the GFS2 filesystem
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-gfs2-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about the Global Filesystem v2.


pkgId: 6a265c4be5360d9a07744a7d454cae83fd3b1a660ca09cac4c69228105e9a0e5
name: pcp-pmda-gluster
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for the Gluster filesystem
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-gluster-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about the gluster filesystem.


pkgId: 0f9cb9e2ff08a88bb36e4a0ae957cebe1065ce820a65c9c031fffac7a7dfc446
name: pcp-pmda-gpfs
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for GPFS Filesystem
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-gpfs-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about the GPFS filesystem.


pkgId: 0df36f5f4374f4c056d49e192dacb5a82085e9cbbc99a872041f5a3b00b579f1
name: pcp-pmda-gpsd
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for a GPS Daemon
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-gpsd-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about a GPS Daemon.


pkgId: 14bfe00d8633d018444e3b0c3349ce1bd2236b997935e27c4ac8bab436af77dd
name: pcp-pmda-hacluster
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for High Availability Clusters
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-hacluster-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about linux High Availability (HA) Clusters.


pkgId: cabaf4e9b6a6e40f75a658c639bddd84a2d9b8323f3ec6066f8ebf0e83c9b248
name: pcp-pmda-haproxy
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for HAProxy
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-haproxy-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  extracting performance metrics from HAProxy over the HAProxy stats socket.


pkgId: 61651ecc15eb406312a2b2c7c54cb1058add41f8111d6c81845133b3063c2258
name: pcp-pmda-infiniband
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for Infiniband HCAs and switches
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-infiniband-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting Infiniband statistics.  By default, it monitors the local HCAs
  but can also be configured to monitor remote GUIDs such as IB switches.


pkgId: 78049f4eb7bd482cd8a780d33a47b26af62fa85e704baf76eafb643d83e19d3d
name: pcp-pmda-json
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for JSON data
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-json-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics output in JSON.


pkgId: 0ecfb688c576cb32db8cce9ffee544c5026329d7880aaa070eae5973a1a583fa
name: pcp-pmda-libvirt
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics from virtual machines
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-libvirt-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  extracting virtualisation statistics from libvirt about behaviour of guest
  and hypervisor machines.


pkgId: 5f363c54a10f00219721a33e5216a8a60aa9def1cc67fbf371b16f3f26f9e570
name: pcp-pmda-lio
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for the LIO subsystem
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-lio-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package provides a PMDA to gather performance metrics from the kernels
  iSCSI target interface (LIO). The metrics are stored by LIO within the Linux
  kernels configfs filesystem. The PMDA provides per LUN level stats, and a
  summary instance per iSCSI target, which aggregates all LUN metrics within the
  target.


pkgId: 33771fed6af7c8fb42e77706b7da2ad495a71e37516a5a9ab47edabc5e371968
name: pcp-pmda-lmsensors
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for hardware sensors
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-lmsensors-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about the Linux hardware monitoring sensors.


pkgId: 82a981ad97d7a4ee38778f42d078337316d4d274f31cc32a75e7a7fadac53500
name: pcp-pmda-logger
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics from arbitrary log files
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-logger-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics from a specified set of log files (or pipes).  The PMDA
  supports both sampled and event-style metrics.


pkgId: 032b4f13fdc1c3070f7a6b456ac35ed8f8ee843599ca1dbb815c774813cb7ea5
name: pcp-pmda-lustre
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for the Lustre Filesytem
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-lustre-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about the Lustre Filesystem.


pkgId: c15e9f00018ad2db582b3036a9542cf4dd6b9050a5a94ad70ffadbe8c6555970
name: pcp-pmda-lustrecomm
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for the Lustre Filesytem Comms
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-lustrecomm-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about the Lustre Filesystem Comms.


pkgId: 55643464c0b9355d74678cb01b4a9b51215276f48dd66a2337bca4629742aaff
name: pcp-pmda-mailq
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for the sendmail queue
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-mailq-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about email queues managed by sendmail.


pkgId: 39eead503a333002565d75bd97ae4e7a6f8c34171955c61b6d9114772a33ce54
name: pcp-pmda-memcache
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for Memcached
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-memcache-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about Memcached.


pkgId: 6eb0ce559e27ffda36ed3be87ea7029f2d898ff2bbbc6e96fe492a61757c61c3
name: pcp-pmda-mic
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for Intel MIC cards
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-mic-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about Intel MIC cards.


pkgId: f6d60d7084681c8e6469aed17b5861dbe23679a75724adb593d502db3bcf2090
name: pcp-pmda-mongodb
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for MongoDB
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-mongodb-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics from MongoDB.


pkgId: 5884e5299ed3a5472f49f199eaf1b2d6ad8aa1fa428b9915286ec7f3c3b5a4a6
name: pcp-pmda-mounts
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for filesystem mounts
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-mounts-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about filesystem mounts.


pkgId: 09ca2420200fbc90ada23e8f252a142f8bcc6d7b52208d757a1e6da21c6fa1ef
name: pcp-pmda-mysql
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for MySQL
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-mysql-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about the MySQL database.


pkgId: 41b1d40f5ef04ff061c27dd2900c8c34ede65558b588797818efb757085b86a9
name: pcp-pmda-named
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for Named
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-named-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about the Named nameserver.


pkgId: e7237a40d8865fc1496b141a91ee2f587f7abe8ff95f8a22ba24684615fe7588
name: pcp-pmda-netcheck
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for simple network checks
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-netcheck-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics from simple network checks.


pkgId: 7915e8faf6292bbc4132a82a662c906fa3c9eddf71a66dd04f9e366939bb425c
name: pcp-pmda-netfilter
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for Netfilter framework
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-netfilter-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about the Netfilter packet filtering framework.


pkgId: 92ba45c669af03a1a7077df0b143492fbd4c1a8db72e533635a287d24c1718ab
name: pcp-pmda-news
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for Usenet News
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-news-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about Usenet News.


pkgId: af34d3bbb2f3e9feb95fc90a3661dfbd4cc2fd096dfd7425b39a5d7e8162410d
name: pcp-pmda-nfsclient
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for NFS Clients
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-nfsclient-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics for NFS Clients.


pkgId: 0b7aa07e8d1101a5eb56f53cd4f9bd13c348638b0af1a1abd297f278d6ec454e
name: pcp-pmda-nginx
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for the Nginx Webserver
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-nginx-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about the Nginx Webserver.


pkgId: eade566ec0250111ebbf5236ba6c7ea21f947ef08bd72bca70018a1b39a70eac
name: pcp-pmda-nutcracker
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for NutCracker (TwemCache)
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-nutcracker-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics from NutCracker (TwemCache).


pkgId: 44386bfdb766625e82cca842fd082b82e45589f47e18d718dcffd7a097313cae
name: pcp-pmda-nvidia-gpu
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for the Nvidia GPU
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-nvidia-gpu-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about Nvidia GPUs.


pkgId: 108bc71f485e343379ced696f77c3edff8b581f6ee27c78ba0c47d03aafe81c8
name: pcp-pmda-openmetrics
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics from OpenMetrics endpoints
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-openmetrics-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  extracting metrics from OpenMetrics (https://openmetrics.io/) endpoints.


pkgId: cad8900b1875989ff9a6a1c46c5d85f3ae8946966e3b836ab8839e3d39c51451
name: pcp-pmda-openvswitch
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for Open vSwitch
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-openvswitch-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics from Open vSwitch.


pkgId: 5ebd97c73fd52a202033c3f8292c4256c2540af5a0768d07348e1877d711fec8
name: pcp-pmda-oracle
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for the Oracle database
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-oracle-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about the Oracle database.


pkgId: b5788deffeda390426fbf58dd9ae4ae471e19ef10b73c1ba5b7d5df5a1180536
name: pcp-pmda-pdns
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for PowerDNS
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-pdns-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about the PowerDNS.


pkgId: 2d99e06b21d9da46dbfbf93d2091289c685a092d05d3380858984d90d2c08f3a
name: pcp-pmda-perfevent
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for hardware counters
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-perfevent-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting hardware counters statistics through libpfm.


pkgId: 8806c5e79fbc222383381bb51a0d5812fc3329fc8c61c92e2158e141fc6a719f
name: pcp-pmda-podman
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for podman containers
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-podman-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting podman container and pod statistics via the podman REST API.


pkgId: b849e0a6b919997223876e5f479585eb802c992c25eefc210846feedd01bea25
name: pcp-pmda-postfix
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for the Postfix (MTA)
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-postfix-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about the Postfix (MTA).


pkgId: c47f558db994eb63bb0a7e7ce1f0a4d260a59b2a422a5fa1b4d3eb5ae06a7b3e
name: pcp-pmda-postgresql
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for PostgreSQL
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-postgresql-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about the PostgreSQL database.


pkgId: 122760b2759132a038cbe099b138394ba3c65b7b259fbe587fb67eff7b113a46
name: pcp-pmda-rabbitmq
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for RabbitMQ queues
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-rabbitmq-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about RabbitMQ message queues.


pkgId: 5b29b173b41f09b9a284e935f24608d235ca5d60fbfa0120cd8f267dc029a2a7
name: pcp-pmda-redis
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for Redis
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-redis-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics from Redis servers (redis.io).


pkgId: 1b68f49c3edfaad59110ae70df32c88acac58971ecee45acffd9e92b3e52467e
name: pcp-pmda-roomtemp
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for the room temperature
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-roomtemp-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about the room temperature.


pkgId: 792ae6ec8376132b1adef412cb27312cd2f012d5149ee10fbb2c459eb65e25ea
name: pcp-pmda-rsyslog
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for Rsyslog
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-rsyslog-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about Rsyslog.


pkgId: f31f9e6df840ba79cec2ac0c09fa8ec892c92e0802ae3a03dcddee18786ea9db
name: pcp-pmda-samba
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for Samba
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-samba-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about Samba.


pkgId: 0c81b37e0ba52c98fba3535c05579435526bb2b3c8ff3241055f29a3027d5ff9
name: pcp-pmda-sendmail
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for Sendmail
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-sendmail-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about Sendmail traffic.


pkgId: 2617fda67ee7f2cc55705dc75cfa39e6510d4c13c520087c93679b974f0829fd
name: pcp-pmda-shping
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for shell command responses
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-shping-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about quality of service and response time measurements of
  arbitrary shell commands.


pkgId: e8d5505e34fa1c444e9a02299c65a5bb05703fe9e9ed891d995a14f2b5e7fba7
name: pcp-pmda-slurm
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for the SLURM Workload Manager
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-slurm-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics from the SLURM Workload Manager.


pkgId: 0577d44913d1c56d20f3e3d82a43a1c0947b54d48c94c5dbb76a2175f3ad5c7f
name: pcp-pmda-smart
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for S.M.A.R.T values
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-smart-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metric Domain Agent (PMDA) for
  collecting metrics of disk S.M.A.R.T values making use of data from the
  smartmontools package.


pkgId: 23fd9ccd7a52e7adae899468ff46b72cc0faf0914b7c8fe87b184c7e73c67a60
name: pcp-pmda-snmp
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for Simple Network Management Protocol
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-snmp-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about SNMP.


pkgId: b7d368a362d03e6235824024f97b78a5501c2be31d4229a59eb2e54038150071
name: pcp-pmda-sockets
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) per-socket metrics
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-sockets-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metric Domain Agent (PMDA) for
  collecting per-socket statistics, making use of utilities such as 'ss'.


pkgId: dbb85dd3f488ebb0da418731c9b05d3443365ce5dfcf24a42f97a67674c8e43e
name: pcp-pmda-summary
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) summary metrics from pmie
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-summary-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about other installed PMDAs.


pkgId: 9e4e73a193a10ab8a5d44c3e934961fc436ce3b2fd1e263c2947f1ce3dec9a7e
name: pcp-pmda-systemd
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics from the Systemd journal
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-systemd-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics from the Systemd journal.


pkgId: 4259169d1cb2747578017a8ba73644bcb8fd3adb3f2e25b76ecca433f1ba2b6b
name: pcp-pmda-trace
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for application tracing
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-trace-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about trace performance data in applications.


pkgId: d3d3bd9b485705966e8318585c91d084b1be8c1dc8427a9dc9cf800c85794cc5
name: pcp-pmda-unbound
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for the Unbound DNS Resolver
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-unbound-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about the Unbound DNS Resolver.


pkgId: 50ee6ff1b0c8393af40c10a45edcd752271b5e37cfdde1a4dd1ba05ffb5e7f3c
name: pcp-pmda-uwsgi
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics from uWSGI servers
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-uwsgi-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics from uWSGI servers.


pkgId: af46ed14077e7fd09be3f0bbdae0090b90fa73f4450689378f5300b1cdfe57e0
name: pcp-pmda-weblog
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics from web server logs
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-weblog-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about web server logs.


pkgId: 9a36a3b74f1a052a13354793e79a3eb22149dc8efa3053751872545693fa0737
name: pcp-pmda-zimbra
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for Zimbra
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-zimbra-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about Zimbra.


pkgId: 34d0f39c5c55730c676f3556e76218e4e196a344237078314cbb96c23ecd2893
name: pcp-pmda-zswap
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) metrics for compressed swap
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-pmda-zswap-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains the PCP Performance Metrics Domain Agent (PMDA) for
  collecting metrics about compressed swap.


pkgId: f2287297a1b9e34a549c7c353b1f9a78dc9e11ffa959075bf11ebaf693fc7028
name: pcp-selinux
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Selinux policy package
url: https://pcp.io
rpm_license: GPL-2.0-or-later AND CC-BY-3.0
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-selinux-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains SELinux support for PCP.  The package contains
  interface rules, type enforcement and file context adjustments for an
  updated policy package.


pkgId: 1a4f0b2ee581635cbe02151b0116c58183fe52f14b60349678a412c57931e9d4
name: pcp-zeroconf
arch: riscv64
version: 6.3.2
epoch: 0
release: 1.oe2503
summary: Performance Co-Pilot (PCP) Zeroconf Package
url: https://pcp.io
rpm_license: GPL-2.0-or-later
rpm_vendor: openEuler
rpm_group: Unspecified
rpm_buildhost: 12107b0cb1bd
rpm_sourcerpm: pcp-6.3.2-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcp-zeroconf-6.3.2-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This package contains configuration tweaks and files to increase metrics
  gathering frequency, several extended pmlogger configurations, as well as
  automated pmie diagnosis, alerting and self-healing for the localhost.


pkgId: 650929c2d385d8096db5876511d8f6dce0e57f6aee1bc2bb0776782adc69cb47
name: pcre
arch: riscv64
version: 8.45
epoch: 0
release: 6.oe2503
summary: Perl Compatible Regular Expressions
url: http://www.pcre.org/
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: 8b5e6c88d4bd
rpm_sourcerpm: pcre-8.45-6.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcre-8.45-6.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The PCRE library is a set of functions that implement regular expression
  pattern matching using the same syntax and semantics as Perl 5. PCRE has
  its own native API, as well as a set of wrapper functions that correspond
  to the POSIX regular expression API. The PCRE library is free, even for
  building proprietary software.

  PCRE was originally written for the Exim MTA, but is now used by many
  high-profile open source projects, including Apache, PHP, KDE, Postfix,
  and Nmap. PCRE has also found its way into some well known commercial
  products, like Apple Safari. Some other interesting projects using PCRE
  include Chicken, Ferite, Onyx, Hypermail, Leafnode, Askemos, Wenlin, and
  8th.


pkgId: 59ed967b5962348b5b73ab244ce38f35536eeaf39207b377d743dddaa1161a37
name: pcre-devel
arch: riscv64
version: 8.45
epoch: 0
release: 6.oe2503
summary: Development files for pcre
url: http://www.pcre.org/
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: 8b5e6c88d4bd
rpm_sourcerpm: pcre-8.45-6.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcre-devel-8.45-6.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The pcre-devel package contains libraries and header files for
  developing applications that use pcre.


pkgId: bafbac64c1f85b80661e9e43c1e840d65ce3e2e5a01e2249392f37c3012cfea4
name: pcre2
arch: riscv64
version: 10.42
epoch: 0
release: 13.oe2503
summary: Perl Compatible Regular Expressions
url: http://www.pcre.org/
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: 5c865fcb8c4a
rpm_sourcerpm: pcre2-10.42-13.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcre2-10.42-13.oe2503.riscv64.rpm
checksum_type: sha256
description:
  PCRE2 is a re-working of the original PCRE1 library to provide an entirely new
  API. Since its initial release in 2015, there has been further development of
  the code and it now differs from PCRE1 in more than just the API.
  PCRE2 is written in C, and it has its own API. There are three sets of
  functions, one for the 8-bit library, which processes strings of bytes, one for
  the 16-bit library, which processes strings of 16-bit values, and one for the
  32-bit library, which processes strings of 32-bit values. Unlike PCRE1, there
  are no C++ wrappers.

  The distribution does contain a set of C wrapper functions for the 8-bit
  library that are based on the POSIX regular expression API (see the pcre2posix
  man page). These are built into a library called libpcre2-posix. Note that this
  just provides a POSIX calling interface to PCRE2; the regular expressions
  themselves still follow Perl syntax and semantics. The POSIX API is restricted,
  and does not give full access to all of PCRE2's facilities.


pkgId: 48b59eaa7da07263f375e07d7b9bd9e8cb2eb0a5ce7c79f0e4331ad423d5f891
name: pcs
arch: riscv64
version: 0.11.8
epoch: 0
release: 2.oe2503
summary: Pacemaker Configuration System
url: https://github.com/ClusterLabs/pcs
rpm_group: System Environment/Base
rpm_buildhost: 9f35d2b0ff70
rpm_sourcerpm: pcs-0.11.8-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcs-0.11.8-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  pcs is a corosync and pacemaker configuration tool.  It permits users to
  easily view, modify and create pacemaker based clusters.

rpm_license:
  GPL-2.0-only AND Apache-2.0 AND MIT AND BSD-3-Clause AND (BSD-2-Clause OR Ruby) AND (BSD-2-Clause OR GPL-2.0-or-later)


pkgId: 83b2bbd1b8890f21f4999f05f9cd544f203c4ecda15c7b5aa1f60315c6d838d4
name: pcsc-lite
arch: riscv64
version: 2.0.0
epoch: 0
release: 1.oe2503
summary: Middleware to access a smart card using SCard API (PC/SC)
url: https://pcsclite.apdu.fr/
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: 0594dd7b426c
rpm_sourcerpm: pcsc-lite-2.0.0-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pcsc-lite-2.0.0-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  PC/SC Lite is a middleware to access a smart card using SCard API (PC/SC).
  This package contains PC/SC Lite server and other utilities.


pkgId: aba5ede780cd1733febd88cf1bfd110ae592d418fa7a7885699dc6cdbb7c6ea2
name: pdf-renderer
arch: noarch
version: 1.0.5
epoch: 0
release: 1.oe2503
summary: A 100% Java PDF renderer and viewer
url: https://java.net/projects/pdf-renderer/
rpm_license: LGPLv2+ and MIT and BSD
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-10
rpm_sourcerpm: pdf-renderer-1.0.5-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pdf-renderer-1.0.5-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  The PDF Renderer is just what the name implies: an open source,
  all Java library which renders PDF documents to the screen using
  Java2D. Typically this means drawing into a Swing panel, but it
  could also draw to other Graphics2D implementations. It could be
  used to draw on top of PDFs, share them over a network, convert
  PDFs to PNG images, or maybe even project PDFs into a 3D scene.


pkgId: d948b7f63a280d114b2b2be4b92a1c76ffd2d7d4285af48e6b9d125042d78230
name: pdfbox
arch: noarch
version: 2.0.29
epoch: 0
release: 1.oe2503
summary: A Java PDF Library
url: http://pdfbox.apache.org/
rpm_license: ASL 2.0
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: pdfbox-2.0.29-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pdfbox-2.0.29-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  Apache PDFBox is an open source Java PDF library for working with PDF
  documents. This project allows creation of new PDF documents, manipulation of
  existing documents and the ability to extract content from documents. Apache
  PDFBox also includes several command line utilities. Apache PDFBox is
  published under the Apache License v2.0.


pkgId: 655bc36ac6000801a09cb144319321597a4d9b853bcaf994ce25137571a52f06
name: pdfpc
arch: riscv64
version: 4.7.0
epoch: 0
release: 1.oe2503
summary: A GTK based presentation viewer application for GNU/Linux
url: https://pdfpc.github.io/
rpm_license: GPL-3.0-or-later
rpm_group: Unspecified
rpm_buildhost: 25fb154b5893
rpm_sourcerpm: pdfpc-4.7.0-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pdfpc-4.7.0-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  pdfpc is a GTK based presentation viewer application for GNU/Linux which uses
  Keynote like multi-monitor output to provide meta information to the speaker
  during the presentation. It is able to show a normal presentation window on one
  screen, while showing a more sophisticated overview on the other one providing
  information like a picture of the next slide, as well as the left over time
  till the end of the presentation. The input files processed by pdfpc are PDF
  documents, which can be created using nearly any of today's presentation
  software.


pkgId: d2fe8d8f6c16f80ee9cbe33ce3910a7a2a32a8f7d30c83d7f23738d96a4849f0
name: pegdown
arch: noarch
version: 1.4.2
epoch: 0
release: 14.oe2503
summary: A pure Java library for clean and lightweight Markdown processing
url: http://pegdown.org
rpm_license: ASL 2.0
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-02
rpm_sourcerpm: pegdown-1.4.2-14.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/pegdown-1.4.2-14.oe2503.noarch.rpm
checksum_type: sha256
description:
  pegdown is a pure Java library for clean and lightweight Markdown processing
  based on a parboiled PEG parser.
  pegdown is nearly 100% compatible with the original Markdown specification and
  fully passes the original Markdown test suite. On top of the standard Markdown
  feature set pegdown implements a number of extensions similar to what other
  popular Markdown processors offer.


pkgId: fb0e41680417c8bfef903a09b787a07c389ad6551c2ac03003368465365c924d
name: perl
arch: riscv64
version: 5.38.0
epoch: 4
release: 10.oe2503
summary: A highly capable, feature-rich programming language
url: https://www.perl.org/
rpm_group: Unspecified
rpm_buildhost: eac0bd76f7a4
rpm_sourcerpm: perl-5.38.0-10.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-5.38.0-10.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Perl 5 is a highly capable, feature-rich programming language with over 30 years of development.
  Perl 5 runs on over 100 platforms from portables to mainframes and is suitable for both rapid
  prototyping and large scale development projects.

rpm_license:
  (GPL-1.0-or-later or Artistic-1.0-perl) and (GPL-2.0-or-later or Artistic-1.0-perl) and MIT and UCD and Public Domain and BSD


pkgId: db6b0c4b547d102417e1962300cf4796eeb66c8fc65b3ae33d012dca426d01a9
name: perl-Algorithm-Diff
arch: noarch
version: 1.201
epoch: 1
release: 3.oe2503
summary: Compute `intelligent' differences between two files / lists
url: https://metacpan.org/pod/Algorithm::Diff
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: bb88fa4dbb01
rpm_sourcerpm: perl-Algorithm-Diff-1.201-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Algorithm-Diff-1.201-3.oe2503.noarch.rpm
checksum_type: sha256
description:
  This is a module for computing the difference between two files, two strings,
  or any other two lists of things. It uses an intelligent algorithm similar to
  (or identical to) the one used by the Unix "diff" program. It is guaranteed to
  find the *smallest possible* set of differences.


pkgId: abb218105a9a2de36f8ca9fbb6e93265c6a459649cc939e9251d657d2cbd0892
name: perl-Alien-Build
arch: noarch
version: 2.84
epoch: 0
release: 2.oe2503
summary: Alien::Build Perl module
url: https://metacpan.org/release/Alien-Build
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: be433bdf5887
rpm_sourcerpm: perl-Alien-Build-2.84-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Alien-Build-2.84-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This package provides tools for building external (non-CPAN) dependencies
  for CPAN. It is mainly designed to be used at install time of a CPAN
  client, and work closely with Alien::Base which is used at run time.


pkgId: 5e801615b30713706b3f80091fc487edb7ace8b45e7079148d9e7d94af372f20
name: perl-Alien-Build-Plugin-Decode-HTML
arch: noarch
version: 2.84
epoch: 0
release: 2.oe2503
summary: Alien::Build plugin to extract links from HTML
url: https://metacpan.org/release/Alien-Build
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: be433bdf5887
rpm_sourcerpm: perl-Alien-Build-2.84-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Alien-Build-Plugin-Decode-HTML-2.84-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This Alien::Build plugin decodes an HTML file listing into a list of
  candidates for your Prefer plugin.


pkgId: 41f91233d811d67deecc32a0d61f539d4083774be1e309dc19203e1a8fdbd06d
name: perl-Alien-Build-Plugin-Download-GitLab-tests
arch: noarch
version: 0.01
epoch: 0
release: 1.oe2503
summary: Tests for perl-Alien-Build-Plugin-Download-GitLab
url: https://metacpan.org/release/Alien-Build-Plugin-Download-GitLab
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 4aff9a47b8d4
rpm_sourcerpm: perl-Alien-Build-Plugin-Download-GitLab-0.01-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Alien-Build-Plugin-Download-GitLab-tests-0.01-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  Tests from perl-Alien-Build-Plugin-Download-GitLab. Execute them
  with "/usr/libexec/perl-Alien-Build-Plugin-Download-GitLab/test".


pkgId: 0ad59efafe7f269c6e48ff0fa39de3c529d3d994d6b56f688f18a1a95f92e125
name: perl-AnyEvent
arch: noarch
version: 7.17
epoch: 0
release: 4.oe2503
summary: DBI of event loop programming
url: https://search.cpan.org/dist/AnyEvent/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-10
rpm_sourcerpm: perl-AnyEvent-7.17-4.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-AnyEvent-7.17-4.oe2503.noarch.rpm
checksum_type: sha256
description:
  AnyEvent provides a uniform interface to various event loops. This allows
  module authors to use event loop functionality without forcing module users
  to use a specific event loop implementation (since more than one event loop
  cannot coexist peacefully).


pkgId: 6e935f7fcd660c4507e93a2e0a77af796bfc9c3db101a0e0d20717542dbea358
name: perl-App-FatPacker
arch: noarch
version: 0.010008
epoch: 0
release: 3.oe2503
summary: Pack dependencies onto a script file
url: https://metacpan.org/dist/App-FatPacker
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-App-FatPacker-0.010008-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-App-FatPacker-0.010008-3.oe2503.noarch.rpm
checksum_type: sha256
description:
  This tool does all the work of tracing, collecting packlists, extracting
  perl modules in fatlib, and then concatenating them into a packed script.


pkgId: 989c4982de58c090305b9211f001e31c8e86a9e37b016a4228e6b953a7f4d373
name: perl-Archive-Tar
arch: noarch
version: 3.02
epoch: 0
release: 2.oe2503
summary: A module for manipulations of tar archives
url: https://metacpan.org/pod/Archive::Tar
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 48500ee659a4
rpm_sourcerpm: perl-Archive-Tar-3.02-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Archive-Tar-3.02-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  archive::Tar provides an object oriented mechanism for handling tar
  files. It provides class methods for quick and easy files handling
  while also allowing for the creation of tar file objects for custom
  manipulation. If you have the IO::Zlib module installed, Archive::Tar
  will also support compressed or gzipped tar files.


pkgId: 38f29c7bfa24e7bbbee223593237ffc1830b78cdf5aedb52298997de6685a968
name: perl-Archive-Zip
arch: noarch
version: 1.68
epoch: 0
release: 1.oe2503
summary: Perl library for accessing Zip archives
url: https://metacpan.org/release/Archive-Zip
rpm_license: (GPL+ or Artistic) and BSD
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-Archive-Zip-1.68-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Archive-Zip-1.68-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  The Archive::Zip module allows a Perl program to create, manipulate, read, and write Zip archive files.
  Zip archives can be created, or you can read from existing zip files.
  Once created, they can be written to files, streams, or strings.
  Members can be added, removed, extracted, replaced, rearranged, and enumerated.
  They can also be renamed or have their dates, comments, or other attributes queried or modified.
  Their data can be compressed or uncompressed as needed.
  Members can be created from members in existing Zip files, or from existing directories, files, or strings.
  This module uses the Compress::Raw::Zlib library to read and write the compressed streams inside the files.
  One can use Archive::Zip::MemberRead to read the zip file archive members as if they were files.


pkgId: 09919c24234f677b595d5574dd879568cdca80f2c1cdf902f0f52212a5d681b8
name: perl-Authen-SASL
arch: noarch
version: 2.1700
epoch: 0
release: 1.oe2503
summary: Perl's SASL authentication framework
url: https://metacpan.org/release/Authen-SASL
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 491cd3cf67ab
rpm_sourcerpm: perl-Authen-SASL-2.1700-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Authen-SASL-2.1700-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  Authen::SASL::Perl is the pure Perl implementation of SASL mechanisms in the Authen::SASL framework,
  At the time of this writing it provides the client part implementation for the following SASL mechanisms.


pkgId: 382fd9434d6954417d672aadce6a37e406aa2c64e57eb96d254565e23532db77
name: perl-B-COW
arch: riscv64
version: 0.007
epoch: 0
release: 2.oe2503
summary: Additional B helpers to check Copy On Write status
url: https://metacpan.org/release/B-COW
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 39e109413a6c
rpm_sourcerpm: perl-B-COW-0.007-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-B-COW-0.007-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  B::COW provides some naïve additional B helpers to check the Copy On Write
  (COW) status of one SvPV (a Perl string variable).

  A COWed SvPV is sharing its string (the PV) with other SvPVs. It's a (kind of)
  Read Only C string, which would be Copied On Write (COW). More than one SV can
  share the same PV, but when one PV needs to alter it, it would perform a copy
  of it, decreasing the COWREFCNT counter. One SV can then drop the COW flag when
  it's the only one holding a pointer to the PV. The COWREFCNT is stored at the
  end of the PV, after the null byte terminating the string. That value is
  limited to 255: when we reach 255, a new PV would be created.


pkgId: 46196c49631620ca8938435f8edaf3fa41a7a48e7d663b42ab9264825d88923e
name: perl-B-Lint
arch: noarch
version: 1.20
epoch: 0
release: 16.oe2503
summary: perl linter
url: https://metacpan.org/release/B-Lint
rpm_license: GPL-1.0-or-later or Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Development/Libraries
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-B-Lint-1.20-16.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-B-Lint-1.20-16.oe2503.noarch.rpm
checksum_type: sha256
description:
  Provides program checking for Perl programs,equivalent to running Perl with the -w option.
  Named after the Unix lint program for checking C programs.


pkgId: 0808539f72d7d9a00974490dd43bf5aff9f13fc7a83020609c727b1ba53f5b65
name: perl-BSSolv
arch: riscv64
version: 0.17
epoch: 0
release: 3.oe2503
summary: OBS solver and repository management using libsolv
url: https://github.com/openSUSE/perl-BSSolv
rpm_license: GPL-1.0-or-later or Artistic-1.0-perl
rpm_group: Unspecified
rpm_buildhost: bb1b284114f4
rpm_sourcerpm: perl-BSSolv-0.17-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-BSSolv-0.17-3.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This is a support perl module for the OBS backend. It contains functions
  for repository management, dependency solving, package ordering, and meta
  file creation.


pkgId: 4973087d54bb4b186da5b2091bd41660b4cff03d7ed519d8301687be2e64e716
name: perl-Bit-Vector
arch: riscv64
version: 7.4
epoch: 0
release: 15.oe2503
summary: An efficient C library which allows you to handle bit vectors
url: https://metacpan.org/release/Bit-Vector
rpm_license: (GPLv2+ or Artistic) and LGPLv2+
rpm_group: Unspecified
rpm_buildhost: 4e5996ed7da8
rpm_sourcerpm: perl-Bit-Vector-7.4-15.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Bit-Vector-7.4-15.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Bit::Vector - bit vectors of arbitrary length (base class)
  Versatile implementation of bit vectors of arbitrary length
  with efficient and easy-to-use methods for various applications,
  especially sets.Base class for all applications and classes
  using bit vectors as their underlying data type.Provides
  overloaded arithmetic and relational operators for maximum
  comfort.


pkgId: 9e599c1dfe15dc13c31bef31f66f884514dd9bc1f5fa7371754086651ea618eb
name: perl-Business-ISBN
arch: noarch
version: 3.009
epoch: 0
release: 2.oe2503
summary: Work with International Standard Book Numbers
url: https://metacpan.org/release/Business-ISBN
rpm_license: Artistic-2.0
rpm_group: Unspecified
rpm_buildhost: e27d11429ac2
rpm_sourcerpm: perl-Business-ISBN-3.009-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Business-ISBN-3.009-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  There are three modules in this package:
   * Business::ISBN - work with International Standard Book Numbers
   * Business::ISBN10 - work with 10 digit International Standard Book Numbers
   * Business::ISBN13 - work with 13 digit International Standard Book Numbers


pkgId: 4bcb09006bc8726c75cdffcf137230e75167d1cfa33c34e52426823a8915f8f2
name: perl-CGI
arch: noarch
version: 4.67
epoch: 0
release: 1.oe2503
summary: Handle Common Gateway Interface requests and responses
url: https://metacpan.org/release/CGI
rpm_license: Artistic-2.0
rpm_group: Unspecified
rpm_buildhost: 74b1163696bb
rpm_sourcerpm: perl-CGI-4.67-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-CGI-4.67-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  CGI.pm is a stable, complete and mature solution for processing and preparing
  HTTP requests and responses. Major features including processing form submissions,
  file uploads, reading and writing cookies, query string generation and manipulation,
  and processing and preparing HTTP headers.

  CGI.pm performs very well in in a vanilla CGI.pm environment and also comes with
  built-in support for mod_perl and mod_perl2 as well as FastCGI.


pkgId: 3b1fe471d82754de1e0bde77a36ef610f28c8b84f35ccf8452f09912091e49b7
name: perl-CPAN
arch: noarch
version: 2.38
epoch: 0
release: 2.oe2503
summary: Query, download and build perl modules from CPAN sites
url: https://metacpan.org/release/CPAN
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 54ba3b3b83d1
rpm_sourcerpm: perl-CPAN-2.38-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-CPAN-2.38-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  The CPAN module automates or at least simplifies the make and install of
  perl modules and extensions. It includes some primitive searching
  capabilities and knows how to use LWP, HTTP::Tiny, Net::FTP and certain
  external download clients to fetch distributions from the net.

  The CPAN module also supports named and versioned *bundles* of modules.
  Bundles simplify handling of sets of related modules.


pkgId: 9e8fb55ba18ed46d855b179817e7d5ab3b6931a344955c9dec1ddc92982f6d9f
name: perl-CPAN-Changes
arch: noarch
version: 0.400002
epoch: 0
release: 11.oe2503
summary: Read and write Changes files
url: https://metacpan.org/release/CPAN-Changes
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Development/Libraries
rpm_buildhost: OERV-9950x-02
rpm_sourcerpm: perl-CPAN-Changes-0.400002-11.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-CPAN-Changes-0.400002-11.oe2503.noarch.rpm
checksum_type: sha256
description:
  It is standard practice to include a Changes file in your distribution. The purpose of the
  Changes file is to help a user figure out what has changed since the last release.

  People have devised many ways to write the Changes file. A preliminary specification has been
  created (CPAN::Changes::Spec) to encourage module authors to write clear and concise Changes.

  This module will help users programmatically read and write Changes files that conform to the specification.


pkgId: 871fe7de508053abbe42041ae2e02dbf4648431f15bff42c5f6bc17aa43024d5
name: perl-CPAN-Common-Index
arch: noarch
version: 0.010
epoch: 0
release: 1.oe2503
summary: Common library for searching CPAN modules, authors and distributions
url: https://metacpan.org/release/CPAN-Common-Index
rpm_license: Apache-2.0
rpm_group: Unspecified
rpm_buildhost: f9f228a05c19
rpm_sourcerpm: perl-CPAN-Common-Index-0.010-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-CPAN-Common-Index-0.010-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module provides a common library for working with a variety of CPAN
  index services. It is intentionally minimalist, trying to use as few non-
  core modules as possible.


pkgId: 3072d1b0e2d11157a7c9bc0407fb32bc265540ae4ef68503cc9d1202bd4ff4e2
name: perl-CPAN-DistnameInfo
arch: noarch
version: 0.12
epoch: 0
release: 1.oe2503
summary: Extract distribution name and version from a distribution filename
url: http://search.cpan.org/dist/CPAN-DistnameInfo/
rpm_license: GPL-1.0-only or Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Development/Libraries
rpm_buildhost: OERV-9950x-11
rpm_sourcerpm: perl-CPAN-DistnameInfo-0.12-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-CPAN-DistnameInfo-0.12-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  Many online services that are centered around CPAN attempt to
  associate multiple uploads by extracting a distribution name from the
  filename of the upload. For most distributions this is easy as they
  have used ExtUtils::MakeMaker or Module::Build to create the
  distribution, which results in a uniform name. But sadly not all
  uploads are created in this way.


pkgId: 95e9743ff75619da381291377548410978b1d5a7fd6d7c12839bb8e668bf3055
name: perl-CPAN-Meta
arch: noarch
version: 2.150010
epoch: 0
release: 422.oe2503
summary: The distribution metadata for a CPAN dist
url: https://metacpan.org/release/CPAN-Meta
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 6e6d6abf1d3a
rpm_sourcerpm: perl-CPAN-Meta-2.150010-422.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-CPAN-Meta-2.150010-422.oe2503.noarch.rpm
checksum_type: sha256
description:
  Software distributions released to the CPAN include a META.json or,
  for older distributions, META.yml, which describes the distribution,
  its contents, and the requirements for building and installing the distribution.
  The data structure stored in the META.json file is described in CPAN::Meta::Spec.

  CPAN::Meta provides a simple class to represent this distribution metadata (or distmeta),
  along with some helpful methods for interrogating that data.


pkgId: 94b72e8c93a0a7f7292075d942d079c120cab167cfdec3918bac54bf28dcce7e
name: perl-CPAN-Meta-Requirements
arch: noarch
version: 2.143
epoch: 0
release: 3.oe2503
summary: A set of version requirements for a CPAN dist
url: https://metacpan.org/release/CPAN-Meta-Requirements
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 55f1021d104d
rpm_sourcerpm: perl-CPAN-Meta-Requirements-2.143-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-CPAN-Meta-Requirements-2.143-3.oe2503.noarch.rpm
checksum_type: sha256
description:
  A CPAN::Meta::Requirements object models a set of version constraints like those specified in the META.yml
  or META.json files in CPAN distributions, and as defined by CPAN::Meta::Spec; It can be built up by adding
  more and more constraints, and it will reduce them to the simplest representation.
  Logically impossible constraints will be identified immediately by thrown exceptions.


pkgId: 4f642c3a058ca8215e9e8e566f4456a29f052d66d0fb6faf7b992f90ff84be1d
name: perl-CPAN-Meta-YAML
arch: noarch
version: 0.018
epoch: 0
release: 422.oe2503
summary: Read and write a subset of YAML for CPAN Meta files
url: https://metacpan.org/release/CPAN-Meta-YAML
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: d8aae2c8a6e2
rpm_sourcerpm: perl-CPAN-Meta-YAML-0.018-422.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-CPAN-Meta-YAML-0.018-422.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module implements a subset of the YAML specification for use in reading and writing CPAN metadata files
  like META.yml and MYMETA.yml. It should not be used for any other general YAML parsing or generation task.
  NOTE: META.yml (and MYMETA.yml) files should be UTF-8 encoded. Users are responsible for proper encoding and decoding.
  In particular, the read and write methods do not support UTF-8 and should not be used.


pkgId: 09e40a49fc383380717b4e10268ec3710004ccdf1e926dcc3d24a4d4c3a4aacd
name: perl-Canary-Stability
arch: noarch
version: 2013
epoch: 0
release: 5.oe2503
summary: Canary to check perl compatibility for schmorp's modules
url: https://metacpan.org/release/Canary-Stability
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-Canary-Stability-2013-5.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Canary-Stability-2013-5.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module is used by Schmorp's modules during configuration stage to test
  the installed perl for compatibility with this modules.


pkgId: bfce56e0408a97a022260df798bf275ab126f7d61b3d8d1bc4cdc5808feb4715
name: perl-Capture-Tiny
arch: noarch
version: 0.48
epoch: 0
release: 4.oe2503
summary: Capture STDOUT and STDERR from Perl, XS or external programs
url: https://metacpan.org/release/Capture-Tiny
rpm_license: ASL 2.0
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-Capture-Tiny-0.48-4.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Capture-Tiny-0.48-4.oe2503.noarch.rpm
checksum_type: sha256
description:
  Capture::Tiny provides a simple, portable way to capture anything sent to
  STDOUT or STDERR, regardless of whether it comes from Perl, from XS code or
  from an external program. Optionally, output can be teed so that it is
  captured while being passed through to the original handles. Yes, it even
  works on Windows. Stop guessing which of a dozen capturing modules to use
  in any particular situation and just use this one.


pkgId: e2bb4da1d01579b51a23248f9271a855207d8c6a7072140c289a32f65939f9a1
name: perl-Carp
arch: noarch
version: 1.50
epoch: 0
release: 421.oe2503
summary: Alternative warn and die for modules
url: https://metacpan.org/release/Carp
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 250f56da46b5
rpm_sourcerpm: perl-Carp-1.50-421.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Carp-1.50-421.oe2503.noarch.rpm
checksum_type: sha256
description:
  The Carp routines are useful in your own modules because they act like
  die() or warn(), but with a message which is more likely to be useful
  to a user of your module.  In the case of cluck, confess, and longmess
  that context is a summary of every call in the call-stack.  For a shorter
  message you can use carp or croak which report the error as being from
  where your module was called.  There is no guarantee that that is where
  the error was, but it is a good educated guess.


pkgId: 1c7a78603ae86d40d08cccfc29298a8eb939f87de1afaf257163bc881be4e885
name: perl-Carp-Clan
arch: noarch
version: 6.08
epoch: 0
release: 2.oe2503
summary: Report errors from perspective of caller of a "clan" of modules
url: https://metacpan.org/release/Carp-Clan
rpm_license: GPL-1.0-or-later or Artistic-1.0
rpm_group: Unspecified
rpm_buildhost: e953c725e29d
rpm_sourcerpm: perl-Carp-Clan-6.08-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Carp-Clan-6.08-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module is based on "'Carp.pm'" from Perl 5.005_03. It has been modified to skip all package
  names matching the pattern given in the "use" statement inside the "'qw()'" term (or argument list).


pkgId: ea7caa339a47fa9d90b252c85b9895952d871ce90b9c58208879fb2d3df2c499
name: perl-Class-Data-Inheritable
arch: noarch
version: 0.10
epoch: 0
release: 2.oe2503
summary: Inheritable, overridable class data
url: https://metacpan.org/release/Class-Data-Inheritable
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 0cd519c0cb5c
rpm_sourcerpm: perl-Class-Data-Inheritable-0.10-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Class-Data-Inheritable-0.10-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  Class::Data::Inheritable is for creating accessor/mutators to
  class data. That is, if you want to store something about your
  class as a whole (instead of about a single object). This data
  is then inherited by your sub-classes and can be overridden.


pkgId: 10cd67126d9dd33dea578af1b4f1c6bb4d163d78af552e8b3f72746bdfaee68e
name: perl-Class-ISA
arch: noarch
version: 0.36
epoch: 0
release: 2.oe2503
summary: A class's ISA tree to report the search path
url: https://metacpan.org/release/Class-ISA
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-11
rpm_sourcerpm: perl-Class-ISA-0.36-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Class-ISA-0.36-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  Perl-Class-ISA is a Class's ISA tree to report the search path.It provides functions
  that return the list (in order) of names of(super-)classes Perl would search to
  find a method, with no duplicates.


pkgId: 769bbda22766ee543928d68921433127d2049915833c33d840de646d94c0ec71
name: perl-Class-Inspector
arch: noarch
version: 1.36
epoch: 0
release: 3.oe2503
summary: Get information about a class and its structure
url: https://search.cpan.org/dist/Class-Inspector/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-10
rpm_sourcerpm: perl-Class-Inspector-1.36-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Class-Inspector-1.36-3.oe2503.noarch.rpm
checksum_type: sha256
description:
  Class::Inspector allows you to get information about a loaded class.
  Most or all of this information can be found in other ways, but they aren't
  always very friendly, and usually involve a relatively high level of Perl
  wizardry, or strange and unusual looking code. Class::Inspector attempts to
  provide an easier, more friendly interface to this information.


pkgId: 020faf87bef8a0b7d771c0d2e258d0b5c8a797a866f1d42e41dde4b6995e18d6
name: perl-Class-Method-Modifiers
arch: noarch
version: 2.15
epoch: 0
release: 2.oe2503
summary: Provides Moose-like method modifiers
url: https://metacpan.org/release/Class-Method-Modifiers
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 831d5b445153
rpm_sourcerpm: perl-Class-Method-Modifiers-2.15-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Class-Method-Modifiers-2.15-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  Method modifiers are a powerful feature from the CLOS (Common Lisp Object
  System) world.

  'Class::Method::Modifiers' provides three modifiers: 'before', 'around',
  and 'after'. 'before' and 'after' are run just before and after the method
  they modify, but can not really affect that original method. 'around' is
  run in place of the original method, with a hook to easily call that
  original method. See the 'MODIFIERS' section for more details on how the
  particular modifiers work.


pkgId: faa6e1cd41258f4b6864a3366d24fee1c94a9e932af274cf0281a27d3341b975
name: perl-Class-Singleton
arch: noarch
version: 1.6
epoch: 0
release: 2.oe2503
summary: Implementation of a "Singleton" class
url: https://metacpan.org/release/Class-Singleton
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: c82793316312
rpm_sourcerpm: perl-Class-Singleton-1.6-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Class-Singleton-1.6-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This is the Class::Singleton module. A Singleton describes an object class
  that can have only one instance in any system. An example of a Singleton
  might be a print spooler or system registry. This module implements a
  Singleton class from which other classes can be derived. By itself, the
  Class::Singleton module does very little other than manage the
  instantiation of a single object. In deriving a class from
  Class::Singleton, your module will inherit the Singleton instantiation
  method and can implement whatever specific functionality is required.


pkgId: 3b8cc3edeac110a578c7292d0b5fc35f86733a97a49b7059a769c8a69bbe27ad
name: perl-Class-XSAccessor
arch: riscv64
version: 1.19
epoch: 0
release: 20.oe2503
summary: Generate fast XS accessors without runtime compilation
url: https://metacpan.org/release/Class-XSAccessor
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 8efbb9957827
rpm_sourcerpm: perl-Class-XSAccessor-1.19-20.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Class-XSAccessor-1.19-20.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Class::XSAccessor implements fast read, write and read/write accessors in
  XS. Additionally, it can provide predicates such as has_foo() for testing
  whether the attribute foo is defined in the object. It only works with
  objects that are implemented as ordinary hashes. Class::XSAccessor::Array
  implements the same interface for objects that use arrays for their
  internal representation.


pkgId: 2ca5e3494999c87dd1192377e5b4ae49a9f34e26701db919189e561ee6bd77e4
name: perl-Clone
arch: riscv64
version: 0.47
epoch: 0
release: 2.oe2503
summary: Recursively copy Perl datatypes
url: https://search.cpan.org/dist/Clone/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 05fb8dbbbb45
rpm_sourcerpm: perl-Clone-0.47-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Clone-0.47-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This module provides a clone() method which makes recursive copies of
  nested hash, array, scalar and reference types, including tied variables
  and objects.


pkgId: 31116fc0cfabd726b9d51173df85527f55b52eb73520a4ed469ac179f33a5eda
name: perl-Color-Library
arch: noarch
version: 0.021
epoch: 0
release: 2.oe2503
summary: Easy-to-use and comprehensive named-color library
url: https://metacpan.org/release/Color-Library
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-10
rpm_sourcerpm: perl-Color-Library-0.021-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Color-Library-0.021-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  Color::Library is an easy-to-use and comprehensive named-color
  dictionary. Currently provides coverage for WWW (SVG, HTML, CSS) colors,
  X11 colors, and more.


pkgId: 476ef4aa4b6f036b37a1ec4d3cf5fedb624abcf9bcec2d893d6722725adf3938
name: perl-Compress-Bzip2
arch: riscv64
version: 2.28
epoch: 0
release: 2.oe2503
summary: This module provides a Compress::Zlib like Perl interface to the bzip2 library
url: https://metacpan.org/release/Compress-Bzip2
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 183f68b3fd45
rpm_sourcerpm: perl-Compress-Bzip2-2.28-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Compress-Bzip2-2.28-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This module provides a Compress::Zlib like Perl interface to the bzip2 library.
  It uses the low level interface to the bzip2 algorithm, and reimplements all high
  level routines.


pkgId: 512bfc63fed7c06652ab5a8ee1d61d388b4792294326150225ecb84e84ee3700
name: perl-Compress-Raw-Bzip2
arch: riscv64
version: 2.213
epoch: 0
release: 2.oe2503
summary: Low-Level Interface to bzip2 compression library
url: https://metacpan.org/release/Compress-Raw-Bzip2
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: f2f46cff3389
rpm_sourcerpm: perl-Compress-Raw-Bzip2-2.213-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Compress-Raw-Bzip2-2.213-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Compress-Raw-Bzip2 provides the interface to the bzip2 library for the modules
  IO::Compress::Bzip2 and IO::Compress::Bunzip2.


pkgId: 80b537544753694c48a013caf46d2466c40c1827b2c6e50ba40490c34911cce9
name: perl-Config-Any
arch: noarch
version: 0.33
epoch: 0
release: 2.oe2503
summary: Load configuration from different file formats, transparently
url: https://search.cpan.org/dist/Config-Any/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Development/Libraries
rpm_buildhost: OERV-9950x-02
rpm_sourcerpm: perl-Config-Any-0.33-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Config-Any-0.33-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  Config::Any provides a facility for Perl applications and libraries to
  load configuration data from multiple different file formats. It supports
  XML, YAML, JSON, Apache-style configuration, Windows INI files, and even
  Perl code.


pkgId: 0f00a0b507114813de045e4b13a697ec16e2623f00021472bbb6ab67db1aac93
name: perl-Config-AutoConf
arch: noarch
version: 0.320
epoch: 0
release: 2.oe2503
summary: A module to implement some of AutoConf macros in pure Perl
url: https://metacpan.org/release/Config-AutoConf
rpm_license: GPL+ or Artistic
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-Config-AutoConf-0.320-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Config-AutoConf-0.320-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module simulates some of the tasks autoconf macros do.  To detect
  a command, a library and similar.


pkgId: 0f45a5f0337f6b89eab425f3fd70dd99865afff6c39e10ce969bf679f7bdbeb6
name: perl-Config-Extend-MySQL
arch: noarch
version: 0.05
epoch: 0
release: 2.oe2503
summary: Extend your favorite .INI parser module to read MySQL configuration file
url: https://metacpan.org/release/Config-Extend-MySQL
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-02
rpm_sourcerpm: perl-Config-Extend-MySQL-0.05-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Config-Extend-MySQL-0.05-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module extends other Config:: modules so they can read MySQL
  configuration files. It works by slurping and preprocessing the files
  before letting your favorite Config:: module parse the result.


pkgId: dbfc4ad872424f4d3e1b47525c566ca65ddaae6eb2724390f47fffa2bccca37b
name: perl-Config-General
arch: noarch
version: 2.67
epoch: 0
release: 1.oe2503
summary: Generic configuration module for Perl
url: https://metacpan.org/release/Config-General
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 4416a0cdd144
rpm_sourcerpm: perl-Config-General-2.67-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Config-General-2.67-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module opens a config file and parses its contents for
  you. After parsing the module returns a hash structure which contains
  the representation of the config file.
  The format of config files supported by Config::General is inspired by
  the well known Apache config format, in fact, this module is 100%
  read-compatible with Apache config files, but you can also just use simple
  name/value pairs in your config files.
  In addition to the capabilities of an Apache config file it supports
  some enhancements such as here-documents, C-style comments or
  multiline options. It is also possible to save the config back to
  disk, which makes the module a perfect backend for configuration
  interfaces.
  It is possible to use variables in config files and there exists also
  support for object oriented access to the configuration.


pkgId: 1b898ade7923f2ea5110ea74956d7d11a2c41bc54f316d02d687c703ed0071ea
name: perl-Config-IniFiles
arch: noarch
version: 3.000003
epoch: 0
release: 3.oe2503
summary: A module for reading .ini-style configuration files
url: https://metacpan.org/release/Config-IniFiles
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 7b298f42936b
rpm_sourcerpm: perl-Config-IniFiles-3.000003-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Config-IniFiles-3.000003-3.oe2503.noarch.rpm
checksum_type: sha256
description:
  Config::IniFiles is a module intended to make life easier for
  those who rely on flat configuration files.


pkgId: aad92cbff1da8179c837369d9988a7891502ec00eb5c934d36b4877c2caf4c07
name: perl-Config-Perl-V
arch: noarch
version: 0.36
epoch: 0
release: 2.oe2503
summary: A module that will return you the output of 'perl -V' in a structure
url: https://metacpan.org/release/Config-Perl-V
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 648990525ed8
rpm_sourcerpm: perl-Config-Perl-V-0.36-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Config-Perl-V-0.36-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  The command 'perl -V' will return you an excerpt from the %Config hash
  combined with the output of 'perl -V' that is not stored inside %Config,
  but only available to the perl binary itself.


pkgId: 7bb590dccc5b638180566ace5062316f2530b59092829a5c4c7bcea862a96dd2
name: perl-Config-Tiny
arch: noarch
version: 2.30
epoch: 0
release: 2.oe2503
summary: Read/Write .ini style files with as little code as possible
url: http://search.cpan.org/dist/Config-Tiny/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Development/Libraries
rpm_buildhost: OERV-9950x-10
rpm_sourcerpm: perl-Config-Tiny-2.30-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Config-Tiny-2.30-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  Config::Tiny is a Perl class to read and write .ini style
  configuration files with as little code as possible, reducing load
  time and memory overhead.


pkgId: 5f0587812a01bdddfe3d7798781682325d25a20a29ba65060022b2f0c903b4f0
name: perl-Config-ZOMG
arch: noarch
version: 1.000000
epoch: 0
release: 2.oe2503
summary: Catalyst::Plugin::ConfigLoader-style layer over Config::Any
url: https://metacpan.org/release/Config-ZOMG
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-10
rpm_sourcerpm: perl-Config-ZOMG-1.000000-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Config-ZOMG-1.000000-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  Config::ZOMG is a fork of Config::JFDI. It removes a couple of unusual
  features and passes the same tests three times faster than Config::JFDI.

  Config::ZOMG is an implementation of Catalyst::Plugin::ConfigLoader. It will
  scan a directory for files matching a certain name. If such a file is found
  which also matches an extension that Config::Any can read, then the
  configuration from that file will be loaded.


pkgId: c65f1edfc72c16b460073bcfc70f9e4694545ffd2f68e20132259fdb53c01aaf
name: perl-Convert-Base32
arch: noarch
version: 0.06
epoch: 0
release: 2.oe2503
summary: Encoding and decoding of base32 strings
url: http://search.cpan.org/dist/Convert-Base32/
rpm_license: GPL-1.0-only or Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Development/Libraries
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-Convert-Base32-0.06-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Convert-Base32-0.06-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module provides functions to convert string from / to Base32 encoding,
  specified in RACE internet-draft. The Base32 encoding is designed to encode
  non-ASCII characters in DNS-compatible host name parts.


pkgId: 8e73862e5c94189962c2b2804dbec26c63a5bd42c614786b9c9f4ba3d9292fd4
name: perl-Convert-Bencode
arch: noarch
version: 1.03
epoch: 0
release: 3.oe2503
summary: Functions for converting to/from bencoded strings
url: http://search.cpan.org/dist/Convert-Bencode/
rpm_license: GPL-1.0-or-later or Artistic-1.0
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-Convert-Bencode-1.03-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Convert-Bencode-1.03-3.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module provides two functions, bencode and bdecode, which encode and
  decode bencoded strings respectivly.


pkgId: 69a82bd0b7d76d3d6e250dea9b9df5217f465db01b213dc77de33e0afd3e8cc0
name: perl-Crypt-CBC
arch: noarch
version: 2.33
epoch: 0
release: 23.oe2503
summary: Encrypt Data with Cipher Block Chaining Mode
url: https://metacpan.org/release/Crypt-CBC
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-Crypt-CBC-2.33-23.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Crypt-CBC-2.33-23.oe2503.noarch.rpm
checksum_type: sha256
description:
  This is Crypt::CBC, a Perl-only implementation of the cryptographic
  cipher block chaining mode (CBC).  In combination with a block cipher
  such as Crypt::DES or Crypt::IDEA, you can encrypt and decrypt
  messages of arbitrarily long length.  The encrypted messages are
  compatible with the encryption format used by SSLeay.


pkgId: 82ef4a1034c57871f1f5d0b527d170c992b89029f6b32bc93775b739699e1bbe
name: perl-Crypt-GPG
arch: noarch
version: 1.64
epoch: 0
release: 2.oe2503
summary: Perl Object Oriented Interface to GnuPG
url: https://metacpan.org/release/Crypt-GPG
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: e75072a98da0
rpm_sourcerpm: perl-Crypt-GPG-1.64-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Crypt-GPG-1.64-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  The Crypt::GPG module provides access to the functionality of the
  GnuPG v1 (www.gnupg.org) encryption tool through an object oriented
  interface. It provides methods for encryption, decryption, signing,
  signature verification, key generation, key certification, export
  and import.


pkgId: fb3458aff3e4facb9f1cbd82d5a2dfc04750e98914a5256dc99c0580f2483ecd
name: perl-Crypt-IDEA
arch: riscv64
version: 1.10
epoch: 0
release: 2.oe2503
summary: Perl interface to IDEA block cipher
url: https://metacpan.org/release/Crypt-IDEA
rpm_license: BSD with advertising
rpm_group: Unspecified
rpm_buildhost: d2dd241dc29b
rpm_sourcerpm: perl-Crypt-IDEA-1.10-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Crypt-IDEA-1.10-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This perl extension is an implementation of the IDEA block cipher algorithm.
  The module implements the Crypt::BlockCipher interface.
  This implementation is copyright Systemics Ltd (http://www.systemics.com/).


pkgId: 314a752296f0782196f7d7ebb85f13679f7d7925feb6396a4fbf61197b124455
name: perl-Crypt-OpenSSL-Bignum
arch: riscv64
version: 0.09
epoch: 0
release: 7.oe2503
summary: OpenSSL's multiprecision integer arithmetic
url: https://metacpan.org/release/Crypt-OpenSSL-Bignum
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: a2faf4a32236
rpm_sourcerpm: perl-Crypt-OpenSSL-Bignum-0.09-7.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Crypt-OpenSSL-Bignum-0.09-7.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Crypt::OpenSSL::Bignum is an XS perl module designed to provide basic access to the OpenSSL
  multiprecision integer arithmetic libraries.Presently, many though not all of the arithmetic
  operations that OpenSSL provides are exposed to perl.  In addition, this module can be used
  to provide access to bignum values produced by other OpenSSL modules, such as key parameters
  from Crypt::OpenSSL::RSA.
  This module requires that the OpenSSL libraries and header files be installed.


pkgId: 9676f70313c3d1ea48c9ec2db3840856c8d7748f71e6249fe3d9acd0b58665a7
name: perl-Crypt-OpenSSL-Random
arch: riscv64
version: 0.17
epoch: 0
release: 1.oe2503
summary: LibreSSL pseudo-random number generator access
url: https://metacpan.org/release/Crypt-OpenSSL-Random
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Development/Libraries
rpm_buildhost: 5cacc9d7dd4a
rpm_sourcerpm: perl-Crypt-OpenSSL-Random-0.17-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Crypt-OpenSSL-Random-0.17-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  "Crypt::OpenSSL::Random" provides the ability to seed and query the
  OpenSSL and LibreSSL library's pseudo-random number generators.


pkgId: 55ab66dc4f18b73ad8b63a1c68f0f9cbff54007faab4e20dffda6862e738606f
name: perl-Crypt-RC4
arch: noarch
version: 2.02
epoch: 0
release: 2.oe2503
summary: Perl implementation of the RC4 encryption algorithm
url: https://metacpan.org/release/Crypt-RC4
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 7ff1f1590362
rpm_sourcerpm: perl-Crypt-RC4-2.02-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Crypt-RC4-2.02-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  A simple implementation of the RC4 algorithm, developed by RSA Security,
  Inc. Here is the description from RSA's website:

  RC4 is a stream cipher designed by Rivest for RSA Data Security (now RSA
  Security). It is a variable key-size stream cipher with byte-oriented
  operations. The algorithm is based on the use of a random permutation. Analysis
  shows that the period of the cipher is overwhelmingly likely to be greater than
  10100. Eight to sixteen machine operations are required per output byte, and
  the cipher can be expected to run very quickly in software. Independent analysts
  have scrutinized the algorithm and it is considered secure.


pkgId: 22bb193b3b06017b6d52b9169ef30457c59ae02f9be1924a2d577afbf1830450
name: perl-Crypt-URandom
arch: noarch
version: 0.40
epoch: 0
release: 1.oe2503
summary: Provide non blocking randomness
url: http://search.cpan.org/dist/Crypt-URandom/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Development/Libraries
rpm_buildhost: OERV-9950x-10
rpm_sourcerpm: perl-Crypt-URandom-0.40-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Crypt-URandom-0.40-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  This Module is intended to provide an interface to the strongest available
  source of non-blocking randomness on the current platform. Platforms
  currently supported are anything supporting /dev/urandom and versions of
  Windows greater than or equal to Windows 2000.


pkgId: 7a7f5f3fd44636c89bc5e16466df02ea19a1bd7e3b42566941db6ce38548e354
name: perl-Crypt-X509
arch: noarch
version: 0.55
epoch: 0
release: 2.oe2503
summary: Parse a X.509 certificate
url: https://metacpan.org/release/Crypt-X509
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: e0a0f999f607
rpm_sourcerpm: perl-Crypt-X509-0.55-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Crypt-X509-0.55-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  Crypt::X509 parses X.509 certificates. Methods are provided for accessing
  most certificate elements.


pkgId: ac8763b4012065ea64bc929f3bcd4e2bd29922b6697001ec4d82d2ab9ca7558e
name: perl-DBD-CSV
arch: noarch
version: 0.60
epoch: 0
release: 2.oe2503
summary: DBI driver for CSV files
url: https://metacpan.org/release/DBD-CSV
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: e9db73669020
rpm_sourcerpm: perl-DBD-CSV-0.60-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-DBD-CSV-0.60-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  The DBD::CSV module is yet another driver for the DBI (Database
  independent interface for Perl). This one is based on the SQL
  "engine" SQL::Statement and the abstract DBI driver DBD::File
  and implements access to so-called CSV files (Comma separated
  values). Such files are mostly used for exporting MS Access and
  MS Excel data.


pkgId: 7ed796222a13df9d6549c0e2d2a2ec6b3bf34cd7e033f63e8e5019c7a44857a8
name: perl-DBD-MariaDB
arch: riscv64
version: 1.23
epoch: 0
release: 3.oe2503
summary: MariaDB and MySQL driver for the Perl5 Database Interface (DBI)
url: https://github.com/gooddata/DBD-MariaDB/
rpm_license: GPL-1.0-or-later or Artistic-1.0
rpm_group: Development/Libraries
rpm_buildhost: caecf4d58d44
rpm_sourcerpm: perl-DBD-MariaDB-1.23-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-DBD-MariaDB-1.23-3.oe2503.riscv64.rpm
checksum_type: sha256
description:
  DBD::MariaDB is the Perl5 Database Interface driver for MariaDB and MySQL
  databases. In other words: DBD::MariaDB is an interface between the Perl
  programming language and the MariaDB/MySQL programming API that comes with
  the MariaDB/MySQL relational database management system. Most functions
  provided by this programming API are supported. Some rarely used functions
  are missing, mainly because no-one ever requested them. :-)


pkgId: 11791ea2917b93ba9eea7e4d28dc9a4efbd31336c87f0a81c4c8f7b36c5eede8
name: perl-DBD-MySQL
arch: riscv64
version: 4.050
epoch: 0
release: 4.oe2503
summary: Perl [DBI] driver for access to MySQL databases.
url: https://metacpan.org/release/DBD-mysql
rpm_license: GPL-1.0-or-later or Artistic-1.0
rpm_group: Unspecified
rpm_buildhost: 1b2d71ba311c
rpm_sourcerpm: perl-DBD-MySQL-4.050-4.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-DBD-MySQL-4.050-4.oe2503.riscv64.rpm
checksum_type: sha256
description:
  DBD::mysql is the Perl5 Database Interface driver for the MySQL database. In other words: DBD::mysql is an
  interface between the Perl programming language and the MySQL programming API that comes with the MySQL
  relational database management system. Most functions provided by this programming API are supported. Some
  rarely used functions are missing, mainly because no-one ever requested them.


pkgId: 4b3ae88951d2535317641a4bb82797e3aa20a19ea5cc4fd2da3b230d8a6bb842
name: perl-DBD-SQLite
arch: riscv64
version: 1.76
epoch: 0
release: 1.oe2503
summary: DBD::SQLite embeds SQLite database engine into a DBD driver
url: https://metacpan.org/release/DBD-SQLite
rpm_license: (GPL-1.0-or-later or Artistic-1.0) and Public Domain
rpm_group: Unspecified
rpm_buildhost: fe027debe4f8
rpm_sourcerpm: perl-DBD-SQLite-1.76-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-DBD-SQLite-1.76-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  SQLite is a software library that implements a self-sufficient, serverless,
  zero-configuration, transactional SQL database engine.

  SQLite can be integrated with Perl using the Perl DBI module.
  The Perl DBI module is the database access module for the Perl programming language.


pkgId: e9b34124ded0ab129189e628b2f4b101c11537558d2737fd83786794553cfa0f
name: perl-DBI
arch: riscv64
version: 1.646
epoch: 0
release: 1.oe2503
summary: Database independent interface for Perl
url: https://dbi.perl.org/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 5e4ceb9fd617
rpm_sourcerpm: perl-DBI-1.646-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-DBI-1.646-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The DBI is the standard database interface module for Perl.
  It defines a set of methods, variables and conventions that provide
  a consistent database interface independent of the actual database being used.
  It is important to remember that the DBI is just an interface.
  The DBI is a layer of "glue" between an application and one or more database driver modules.
  It is the driver modules which do most of the real work. The DBI provides a standard interface
  and framework for the drivers to operate within.


pkgId: 2ecdaeced6d478c0398975d375739e8f9e816bfda36c20bc4024176d3d4ee23c
name: perl-DB_File
arch: riscv64
version: 1.859
epoch: 0
release: 2.oe2503
summary: Perl5 access to Berkeley DB version 1.x
url: https://metacpan.org/release/DB_File
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: de9dc9bee70a
rpm_sourcerpm: perl-DB_File-1.859-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-DB_File-1.859-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  DB_File is a module which allows Perl programs to make use of the facilities
  provided by Berkeley DB version 1.x (if you have a newer version of DB, you
  will be limited to functionality provided by interface of version 1.x). The
  interface defined here mirrors the Berkeley DB interface closely.


pkgId: 13c751c5449f1eb27644b98556e9af1d0e249268296bd1b835cdf31817093e42
name: perl-Data-Dump
arch: noarch
version: 1.25
epoch: 0
release: 3.oe2503
summary: Pretty printing of data structures
url: https://metacpan.org/release/Data-Dump
rpm_license: GPL-1.0-or-later or Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-Data-Dump-1.25-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Data-Dump-1.25-3.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module provide a few functions that traverse their argument and produces a string as its result.
  The string contains Perl code that, when evaled, produces a deep copy of the original arguments.


pkgId: 5c6e9abca5769a14495220b0358a655a12f11327fc43c2ed14e9b6b36590e0c3
name: perl-Data-Dumper
arch: riscv64
version: 2.183
epoch: 0
release: 3.oe2503
summary: Stringified perl data structures, suitable for both printing and eval
url: https://metacpan.org/release/Data-Dumper
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 701ba2a5d955
rpm_sourcerpm: perl-Data-Dumper-2.183-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Data-Dumper-2.183-3.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Given a list of scalars or reference variables, writes out their contents in perl syntax.
  The references can also be objects. The content of each variable is output in a single Perl statement.
  Handles self-referential structures correctly.
  The return value can be evaled to get back an identical copy of the original reference structure.
  (Please do consider the security implications of eval'ing code from untrusted sources!)


pkgId: 4580a71cf5558c7ab4bc93e3da2b1bb8159d52aa15b1e73e9bff701ceb4ea16c
name: perl-Data-Dumper-Names
arch: noarch
version: 0.03
epoch: 0
release: 2.oe2503
summary: Data::Dumper like module for printing and eval data structures
url: https://metacpan.org/release/Data-Dumper-Names
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-Data-Dumper-Names-0.03-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Data-Dumper-Names-0.03-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  The essential module Data::Dumper is used for printing perl data structures or
  suitable for eval. Data::Dumper::Names dump variables with names and without
  source filter.


pkgId: a6e0e8fda6915613e1713d43fc5c0765cb0cab1d0298efd06e83e31ae9df0d6f
name: perl-Data-Section
arch: noarch
version: 0.200007
epoch: 0
release: 6.oe2503
summary: Read multiple hunks of data out of your DATA section
url: https://metacpan.org/release/Data-Section
rpm_license: GPL+ or Artistic
rpm_group: Unspecified
rpm_buildhost: fb13106b04f3
rpm_sourcerpm: perl-Data-Section-0.200007-6.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Data-Section-0.200007-6.oe2503.noarch.rpm
checksum_type: sha256
description:
  This archive contains the distribution Data-Section,
  version 0.200007:
  read multiple hunks of data out of your DATA section


pkgId: 23f9e47e16617163981c1a8a322fa877219afab36a2b4fe956968c0cd726b40e
name: perl-Data-UUID
arch: riscv64
version: 1.227
epoch: 0
release: 1.oe2503
summary: Perl extension for generating Globally/Universally Unique Identifiers (GUIDs/UUIDs)
url: https://metacpan.org/release/Data-UUID
rpm_license: BSD and MIT
rpm_group: Unspecified
rpm_buildhost: ee055493ca51
rpm_sourcerpm: perl-Data-UUID-1.227-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Data-UUID-1.227-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This module provides a framework for generating UUIDs (Universally Unique Identifiers, also known as
  GUIDs (Globally Unique Identifiers). A UUID is 128 bits long, and is guaranteed to be different from
  all other UUIDs/GUIDs generated until 3400 A.D. UUIDs were originally used in the Network Computing
  System (NCS) and later in the Open Software Foundation's (OSF) Distributed Computing Environment.
  Currently many different technologies rely on UUIDs to provide unique identity for various software
  components, Microsoft COM/DCOM for instance, uses GUIDs very extensively to uniquely identify classes,
  applications and components across network-connected systems.


pkgId: f99571b6bb6883d088b0f21046e96e42b383ec123591b7f19b7ff2ec6017a8ed
name: perl-Data-Uniqid
arch: noarch
version: 0.12
epoch: 0
release: 2.oe2503
summary: Perl extension for simple generating of unique id's
url: https://metacpan.org/release/Data-Uniqid
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 7dfd59481e46
rpm_sourcerpm: perl-Data-Uniqid-0.12-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Data-Uniqid-0.12-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  Data::Uniqid provides three simple routines for generating unique ids.
  These ids are coded with a Base62 system to make them short and handy (e.g.
  to use it as part of a URL).


pkgId: fc9ece18646a537bd192cbf09891429fcb6120fa131431fae5a4b1a8e50e01ec
name: perl-Date-Calc
arch: noarch
version: 6.4
epoch: 0
release: 12.oe2503
summary: Gregorian calendar date calculations
url: https://metacpan.org/release/Date-Calc
rpm_license: GPL+ or Artistic
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-Date-Calc-6.4-12.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Date-Calc-6.4-12.oe2503.noarch.rpm
checksum_type: sha256
description:
  This package consists of a C library and a Perl module (which uses the C library,
  internally) for all kinds of date calculations based on the Gregorian calendar
  (the one used in all western countries today), thereby complying with all
  relevant norms and standards: ISO/R 2015-1971, DIN 1355 and, to some extent,
  ISO 8601 (where applicable).


pkgId: cfd489bc345c07824d997b4191fa9b87d1965b90c579a68f8f18b330c496e28a
name: perl-Date-ISO8601
arch: noarch
version: 0.005
epoch: 0
release: 2.oe2503
summary: Three ISO 8601 numerical calendars
url: https://search.cpan.org/dist/Date-ISO8601/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Development/Libraries
rpm_buildhost: OERV-9950x-10
rpm_sourcerpm: perl-Date-ISO8601-0.005-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Date-ISO8601-0.005-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module places no limit on the range of dates to which it may be applied. All function arguments are permitted to be Math::BigInt or Math::BigRat objects in order to achieve arbitrary range. Native Perl integers are also permitted, as a convenience when the range of dates being handled is known to be sufficiently small.


pkgId: 4b1c0aed8473e27ad8498f556f776fb45d9766614ad83e2ccec777406f005ebe
name: perl-Date-Manip
arch: noarch
version: 6.95
epoch: 0
release: 1.oe2503
summary: Date manipulation routines
url: https://metacpan.org/release/Date-Manip
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-Date-Manip-6.95-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Date-Manip-6.95-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  Date::Manip is a series of modules designed to make any common date/time operation easy to do.
  Operations such as comparing two times,determining a date a given amount of time from another,
  or parsing international times are all easily done. It deals with time as it is used in the
  Gregorian calendar (the one currently in use) with full support for time changes due to daylight
  saving time.
  From the very beginning, the main focus of Date::Manip has been to be able to do ANY desired
  date/time operation easily.Many other modules exist which may do a subset of these operations
  quicker or more efficiently,but no other module can do all of the operations available in Date::Manip.
  Date::Manip has functionality to work with several fundamental types of data.


pkgId: 15dfb60b273ca650bcc624d343b2ce650d736d65cae7906c8bbd1704c3ee64a4
name: perl-DateTime
arch: riscv64
version: 1.65
epoch: 0
release: 2.oe2503
summary: Date and time object for Perl
url: https://metacpan.org/release/DateTime
rpm_license: Artistic-2.0
rpm_group: Unspecified
rpm_buildhost: adccd1a4b301
rpm_sourcerpm: perl-DateTime-1.65-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-DateTime-1.65-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  DateTime is a class for the representation of date/time combinations.  It
  represents the Gregorian calendar, extended backwards in time before its
  creation (in 1582). This is sometimes known as the "proleptic Gregorian
  calendar". In this calendar, the first day of the calendar (the epoch), is the
  first day of year 1, which corresponds to the date which was (incorrectly)
  believed to be the birth of Jesus Christ.


pkgId: 5b605920444bfd5cbed643a2192a4e5db57ee08cb78ffdbf5a0fe1acf791392f
name: perl-DateTime-Format-Builder
arch: noarch
version: 0.83
epoch: 0
release: 3.oe2503
summary: Create DateTime parser classes and objects
url: https://metacpan.org/release/DateTime-Format-Builder
rpm_license: Artistic 2.0 and (GPL-1.0-or-later OR Artistic-1.0-Perl)
rpm_group: Unspecified
rpm_buildhost: f592e6b4dc75
rpm_sourcerpm: perl-DateTime-Format-Builder-0.83-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-DateTime-Format-Builder-0.83-3.oe2503.noarch.rpm
checksum_type: sha256
description:
  DateTime::Format::Builder creates DateTime parsers. Many string formats of
  dates and times are simple and just require a basic regular expression to
  extract the relevant information. Builder provides a simple way to do this
  without writing reams of structural code.

  Builder provides a number of methods, most of which you'll never need, or at
  least rarely need. They're provided more for exposing of the module's innards
  to any sub-classes, or for when you need to do something slightly beyond what
  is expected.


pkgId: f2a3298e805ff96146ace9a9a8d75c4638cdc18335635b6a017f6cf7912ff872
name: perl-DateTime-Format-Strptime
arch: noarch
version: 1.79
epoch: 1
release: 2.oe2503
summary: Parse and format strptime and strftime patterns
url: https://metacpan.org/release/DateTime-Format-Strptime
rpm_license: Artistic-2.0
rpm_group: Unspecified
rpm_buildhost: 509b6861553b
rpm_sourcerpm: perl-DateTime-Format-Strptime-1.79-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-DateTime-Format-Strptime-1.79-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module implements most of strptime(3), the POSIX function that is the
  reverse of strftime(3), for DateTime. While strftime takes a DateTime and a
  pattern and returns a string, strptime takes a string and a pattern and
  returns the DateTime object associated.


pkgId: 91fc59a2ea187630b7c970fac770876a56ddd3df35afa169619f4d2883584a94
name: perl-DateTime-Locale
arch: noarch
version: 1.44
epoch: 0
release: 2.oe2503
summary: Localization support for DateTime.pm
url: https://metacpan.org/release/DateTime-Locale
rpm_license: (GPL-1.0-or-later or Artistic-1.0-Perl) and Unicode-DFS-2015
rpm_group: Unspecified
rpm_buildhost: b53ad0b7d369
rpm_sourcerpm: perl-DateTime-Locale-1.44-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-DateTime-Locale-1.44-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  DateTime::Locale is primarily a factory for the various locale sub-classes.
  It also provides some functions for getting information on all the
  available locales.


pkgId: 122e8b3def70f92fb7ed4e3d8dd6d862106cfccdc6402d2be40eec53d1bcc91c
name: perl-DateTime-TimeZone
arch: noarch
version: 2.62
epoch: 0
release: 2.oe2503
summary: Time zone object base class and factory
url: https://metacpan.org/release/DateTime-TimeZone
rpm_license: (GPL-1.0-or-later OR Artistic-1.0-Perl) and Public Domain
rpm_group: Unspecified
rpm_buildhost: f866cba5e762
rpm_sourcerpm: perl-DateTime-TimeZone-2.62-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-DateTime-TimeZone-2.62-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This class is the base class for all time zone objects. A time zone is
  represented internally as a set of observances, each of which describes the
  offset from GMT for a given time period.


pkgId: 9a2f109c87cb60756fe0e74fea12b96a638bb1fd8b40d4c9d750a9736ac82f42
name: perl-DateTime-TimeZone-SystemV
arch: noarch
version: 0.010
epoch: 0
release: 2.oe2503
summary: System V and POSIX timezone strings
url: https://metacpan.org/release/DateTime-TimeZone-SystemV
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 79cbb7d3f472
rpm_sourcerpm: perl-DateTime-TimeZone-SystemV-0.010-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-DateTime-TimeZone-SystemV-0.010-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  An instance of this class represents a timezone that was specified by means
  of a System V timezone recipe or the POSIX extended form of the same
  syntax. These can express a plain offset from Universal Time, or a system
  of two offsets (standard and daylight saving time) switching on a yearly
  cycle according to certain types of rule.

  This class implements the DateTime::TimeZone interface, so that its instances
  can be used with DateTime objects.


pkgId: 37413cb6c3410193259ff4a1f1f05a94a4198353cd8c20e5d9c65befca1575a9
name: perl-DateTime-TimeZone-Tzfile
arch: noarch
version: 0.011
epoch: 0
release: 2.oe2503
summary: Tzfile (zoneinfo) timezone files
url: https://metacpan.org/release/DateTime-TimeZone-Tzfile
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: c274563e79ed
rpm_sourcerpm: perl-DateTime-TimeZone-Tzfile-0.011-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-DateTime-TimeZone-Tzfile-0.011-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  An instance of this class represents a timezone that was encoded in a file
  in the tzfile(5) format. These can express arbitrary patterns of offsets
  from Universal Time, changing over time. Offsets and change times are
  limited to a resolution of one second.

  This class implements the DateTime::TimeZone interface, so that its instances
  can be used with DateTime objects.


pkgId: 024fd25b7989078a65a1e2f1cfae00a8367c46e4a71ba254246016a8d4187408
name: perl-Devel-CallChecker
arch: riscv64
version: 0.009
epoch: 0
release: 2.oe2503
summary: Custom op checking attached to subroutines
url: https://metacpan.org/release/Devel-CallChecker
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 0cad8ad7ecac
rpm_sourcerpm: perl-Devel-CallChecker-0.009-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Devel-CallChecker-0.009-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This module makes some new features of the Perl 5.14.0 C API available to
  XS modules running on older versions of Perl. The features are centered
  around the function cv_set_call_checker, which allows XS code to attach a
  magical annotation to a Perl subroutine, resulting in resolvable calls to
  that subroutine being mutated at compile time by arbitrary C code. This
  module makes cv_set_call_checker and several supporting functions
  available. (It is possible to achieve the effect of cv_set_call_checker
  from XS code on much earlier Perl versions, but it is painful to achieve
  without the centralized facility.)


pkgId: bc445769896bc5c2c97576242969e5e8b934968dd1b885276174717a81a11beb
name: perl-Devel-Cycle
arch: noarch
version: 1.12
epoch: 0
release: 2.oe2503
summary: Find memory cycles in objects
url: https://search.cpan.org/dist/Devel-Cycle/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Development/Libraries
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-Devel-Cycle-1.12-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Devel-Cycle-1.12-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This is a simple developer's tool for finding circular references in
  objects and other types of references. Because of Perl's reference-count
  based memory management, circular references will cause memory leaks.


pkgId: 010d7501114625fe4c7e063e62c396fb3a4ff4aae739569f1ce45ad64dc5e27e
name: perl-Devel-GlobalDestruction
arch: noarch
version: 0.14
epoch: 0
release: 9.oe2503
summary: Expose PL_dirty, the flag that marks global destruction
url: https://metacpan.org/release/Devel-GlobalDestruction
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 87f251bf95f7
rpm_sourcerpm: perl-Devel-GlobalDestruction-0.14-9.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Devel-GlobalDestruction-0.14-9.oe2503.noarch.rpm
checksum_type: sha256
description:
  Perl's global destruction is a little tricky to deal with with respect to
  finalizers because it's not ordered and objects can sometimes disappear.


pkgId: ed1d37e23014097b8c8a973caf5e0cf40bbdff794eca58996a627a2e4fafdc13
name: perl-Devel-Hide
arch: noarch
version: 0.0015
epoch: 0
release: 2.oe2503
summary: Forces the unavailability of specified Perl modules (for testing)
url: https://metacpan.org/release/Devel-Hide
rpm_license: GPL+ or Artistic
rpm_group: Unspecified
rpm_buildhost: 3c21c06a6e8f
rpm_sourcerpm: perl-Devel-Hide-0.0015-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Devel-Hide-0.0015-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  Given a list of Perl modules/filenames, this module makes require and use
  statements fail (regardless of whether the specified files/modules are
  installed or not).


pkgId: 9d627916a3e162f3261184347a24912969b2dc6feda10d755cecea4266e3f663
name: perl-Devel-LexAlias
arch: riscv64
version: 0.05
epoch: 0
release: 2.oe2503
summary: Alias lexical variables
url: https://metacpan.org/release/Devel-LexAlias
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 9e18c2b1033a
rpm_sourcerpm: perl-Devel-LexAlias-0.05-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Devel-LexAlias-0.05-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Devel::LexAlias provides the ability to alias a lexical variable in a
  subroutines scope to one of your choosing.


pkgId: 9912c7112140fa83de6ed5ee4092e056677d0310ed01b5246fc7b1a8d5ad73ed
name: perl-Devel-PPPort
arch: riscv64
version: 3.71
epoch: 0
release: 2.oe2503
summary: Perl Pollution Portability header generator
url: https://metacpan.org/release/Devel-PPPort
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 72f51035c47f
rpm_sourcerpm: perl-Devel-PPPort-3.71-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Devel-PPPort-3.71-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Perl's API has changed over time, gaining new features, new functions,
  increasing its flexibility, and reducing the impact on the C name space
  environment (reduced pollution). The header file written by this module,
  typically ppport.h, attempts to bring some of the newer Perl API features
  to older versions of Perl, so that you can worry less about keeping track
  of old releases, but users can still reap the benefit.


pkgId: 698ddf3b384908afccde479878de9fb82ded5860bcd0695647c78a466397a247
name: perl-Devel-Size
arch: riscv64
version: 0.84
epoch: 0
release: 2.oe2503
summary: Perl extension for finding the memory usage of Perl variables
url: https://metacpan.org/release/Devel-Size
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 3bfab079ad4a
rpm_sourcerpm: perl-Devel-Size-0.84-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Devel-Size-0.84-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This module figures out the real size of Perl variables in bytes, as accurately as possible.
  Call functions with a reference to the variable you want the size of. If the variable is a
  plain scalar it returns the size of this scalar. If the variable is a hash or an array, use
  a reference when calling.


pkgId: 0b1c11e17fa0bf3f818ff466075372c9e6213742dac8180eae7bbaae6e54af98
name: perl-Devel-StackTrace
arch: noarch
version: 2.05
epoch: 1
release: 1.oe2503
summary: Perl module implementing stack trace and stack trace frame objects
url: https://metacpan.org/release/Devel-StackTrace
rpm_license: Artistic 2.0
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-Devel-StackTrace-2.05-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Devel-StackTrace-2.05-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  The Devel::StackTrace module contains two classes, Devel::StackTrace
  and Devel::StackTraceFrame.  The goal of this object is to encapsulate
  the information that can found through using the caller() function, as
  well as providing a simple interface to this data.

  The Devel::StackTrace object contains a set of Devel::StackTraceFrame
  objects, one for each level of the stack.  The frames contain all the
  data available from caller() as of Perl 5.6.0.


pkgId: 9d1ccb954dee7f8fea2044c1758184bfdd5f969a89e5f21d309bcb95688a2605
name: perl-Digest
arch: noarch
version: 1.20
epoch: 0
release: 4.oe2503
summary: Modules that calculate message digests
url: https://metacpan.org/release/Digest
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 89bb6fa09c69
rpm_sourcerpm: perl-Digest-1.20-4.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Digest-1.20-4.oe2503.noarch.rpm
checksum_type: sha256
description:
  The Digest:: modules calculate digests, also called "fingerprints" or
  "hashes", of some data, called a message. The digest is (usually)
  some small/fixed size string. The actual size of the digest depend of
  the algorithm used. The message is simply a sequence of arbitrary
  bytes or bits.


pkgId: f04b24a635c0769d590401fd2dfbfcc18ca90738b82baeea7695f21d0ec45d3b
name: perl-Digest-HMAC
arch: noarch
version: 1.05
epoch: 0
release: 1.oe2503
summary: Keyed-Hashing for Message Authentication
url: https://metacpan.org/release/Digest-HMAC
rpm_license: GPL+ or Artistic
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-Digest-HMAC-1.05-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Digest-HMAC-1.05-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  HMAC is used for message integrity checks between two parties that share a secret key,
  and works in combination with some other Digest algorithm, usually MD5 or SHA-1.
  The HMAC mechanism is described in RFC 2104.

  HMAC follow the common Digest:: interface, but the constructor takes the secret key
  and the name of some other simple Digest:: as argument.

  The hmac() and hmac_hex() functions and the Digest::HMAC->new() constructor takes an
  optional $blocksize argument as well. The HMAC algorithm assumes the digester to hash
  by iterating a basic compression function on blocks of data and the $blocksize should
  match the byte-length of such blocks.

  The default $blocksize is 64 which is suitable for the MD5 and SHA-1 digest functions.
  For stronger algorithms the blocksize probably needs to be increased.


pkgId: 8f455ef5e02e967ebe35acc58e3fa3e49aa0bda83985a03b59c44ae85941252b
name: perl-Digest-MD4
arch: riscv64
version: 1.9
epoch: 0
release: 3.oe2503
summary: Perl interface to the MD4 Algorithm
url: https://search.cpan.org/dist/Digest-MD4/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Development/Libraries
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-Digest-MD4-1.9-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Digest-MD4-1.9-3.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The Digest::MD4 module allows you to use the RSA Data Security Inc. MD4
  Message Digest algorithm from within Perl programs. The algorithm takes as
  input a message of arbitrary length and produces as output a 128-bit
  "fingerprint" or "message digest" of the input.


pkgId: 9befe4251e887a8a39e228dc45021a5c06c247cd2c416bd8943f20dc6f625502
name: perl-Digest-MD5
arch: riscv64
version: 2.58
epoch: 0
release: 3.oe2503
summary: Perl interface to the MD5 algorithm
url: https://metacpan.org/release/Digest-MD5
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 3850df64b808
rpm_sourcerpm: perl-Digest-MD5-2.58-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Digest-MD5-2.58-3.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The Digest::MD5 module allows you to use the RSA Data Security Inc. MD5
  Message Digest algorithm from within Perl programs. The algorithm takes as
  input a message of arbitrary length and produces as output a 128-bit
  "fingerprint" or "message digest" of the input.


pkgId: d1b45a2198f37c04fe22619f7b4f75f60e69519b6853a902ee69e05f7db55bbf
name: perl-Digest-Perl-MD5
arch: noarch
version: 1.9
epoch: 0
release: 2.oe2503
summary: Digest::Perl::MD5 Perl module
url: https://search.cpan.org/dist/Digest-Perl-MD5/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Development/Libraries
rpm_buildhost: OERV-9950x-02
rpm_sourcerpm: perl-Digest-Perl-MD5-1.9-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Digest-Perl-MD5-1.9-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This modules has the same interface as the much faster Digest::MD5. So you
  can easily exchange them, e.g.


pkgId: fc6f4f77892ccfa0e30ed63e160615a87e4a40efb03646fdb45a8fe267e256e5
name: perl-Digest-SHA
arch: riscv64
version: 6.04
epoch: 1
release: 2.oe2503
summary: Perl extension for SHA-1/224/256/384/512
url: https://metacpan.org/release/Digest-SHA
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: fdc39be0bef6
rpm_sourcerpm: perl-Digest-SHA-6.04-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Digest-SHA-6.04-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Digest::SHA is a complete implementation of the NIST Secure Hash Standard. It
  gives Perl programmers a convenient way to calculate SHA-1, SHA-224, SHA-256,
  SHA-384, SHA-512, SHA-512/224, and SHA-512/256 message digests. The module can
  handle all types of input, including partial-byte data.


pkgId: ae1f398f85d749aca307fd1538d6751b74bab0cbf1ba4ba4ca898f7299a927a2
name: perl-Digest-SHA1
arch: riscv64
version: 2.13
epoch: 0
release: 28.oe2503
summary: Perl interface to the SHA-1 algorithm
url: https://metacpan.org/release/Digest-SHA1
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 675c2685ebc5
rpm_sourcerpm: perl-Digest-SHA1-2.13-28.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Digest-SHA1-2.13-28.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The Digest::SHA1 module allows you to use the NIST SHA-1 message digest algorithm from within
  Perl programs. The algorithm takes as input a message of arbitrary length and produces as output
  a 160-bit "fingerprint" or "message digest" of the input.


pkgId: 3b84609eb4f2a249d92a3359972a6ab164b71f3b9060d96e75f695e6d3ebbbf0
name: perl-Dist-CheckConflicts
arch: noarch
version: 0.11
epoch: 0
release: 2.oe2503
summary: Declare version conflicts for your dist
url: https://metacpan.org/release/Dist-CheckConflicts
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 60b88a7bd746
rpm_sourcerpm: perl-Dist-CheckConflicts-0.11-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Dist-CheckConflicts-0.11-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  One shortcoming of the CPAN clients that currently exist is that they have no
  way of specifying conflicting downstream dependencies of modules. This module
  attempts to work around this issue by allowing you to specify conflicting
  versions of modules separately, and deal with them after the module is done
  installing.

  For instance, say you have a module Foo, and some other module Bar uses Foo. If
  Foo were to change its API in a non-backwards-compatible way, this would cause
  Bar to break until it is updated to use the new API. Foo can't just depend on
  the fixed version of Bar, because this will cause a circular dependency
  (because Bar is already depending on Foo), and this doesn't express intent
  properly anyway - Foo doesn't use Bar at all. The ideal solution would be for
  there to be a way to specify conflicting versions of modules in a way that would
  let CPAN clients update conflicting modules automatically after an existing
  module is upgraded, but until that happens, this module will allow users to do
  this manually.


pkgId: 0bf146e351429188bf4a17c74feeea3456907fcd3e876117fddc4828c6ac5e04
name: perl-DynaLoader-Functions
arch: noarch
version: 0.004
epoch: 0
release: 2.oe2503
summary: Deconstructed dynamic C library loading
url: https://metacpan.org/release/DynaLoader-Functions
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-02
rpm_sourcerpm: perl-DynaLoader-Functions-0.004-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-DynaLoader-Functions-0.004-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module provides a function-based interface to dynamic loading as used
  by Perl. Some details of dynamic loading are very platform-dependent, so
  correct use of these functions requires the programmer to be mindful of the
  space of platform variations.


pkgId: 6ea2e441d551e670f0e06d6bdf71aaccb898a2e7fe2c6c5208162575754ef8e1
name: perl-Encode
arch: riscv64
version: 3.21
epoch: 4
release: 2.oe2503
summary: Character encodings in Perl
url: https://metacpan.org/release/Encode
rpm_license: (GPL-1.0-or-later OR Artistic-1.0-Perl) and Artistic-2.0
rpm_group: Unspecified
rpm_buildhost: 36875890e581
rpm_sourcerpm: perl-Encode-3.21-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Encode-3.21-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The Encode module provides the interface between Perl strings and the rest
  of the system. Perl strings are sequences of characters.


pkgId: a2e937c80e926a2024f9e913e60e19bf96d9fe6b1793c675373f837aa4f3de1f
name: perl-Encode-Detect
arch: riscv64
version: 1.01
epoch: 0
release: 30.oe2503
summary: An Encode::Encoding subclass that detects the encoding of data
url: https://metacpan.org/release/Encode-Detect
rpm_license: MPL-1.1 OR GPL-2.0-or-later OR LGPL-2.0-or-later
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-Encode-Detect-1.01-30.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Encode-Detect-1.01-30.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This Perl module is an Encode::Encoding subclass that uses Encode::Detect::Detector to determine
  the charset of the input data and then decodes it using the encoder of the detected charset.
  It does not require the configuration of a set of expected encodings.


pkgId: 9ec44b1c36cf7230f5209db17f5ad9575b0e2ffe3ea327f5363789fadfeac3ed
name: perl-Encode-HanExtra
arch: riscv64
version: 0.23
epoch: 0
release: 2.oe2503
summary: Extra sets of Chinese encodings
url: https://metacpan.org/release/Encode-HanExtra
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: 8e46e964940c
rpm_sourcerpm: perl-Encode-HanExtra-0.23-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Encode-HanExtra-0.23-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Perl 5.7.3 and later ships with an adequate set of Chinese encodings,
  including the commonly used CP950, CP936 (also known as GBK), Big5 (alias
  for Big5-Eten), Big5-HKSCS, EUC-CN, HZ, and ISO-IR-165.
  However, the numbers of Chinese encodings are staggering, and a complete
  coverage will easily increase the size of perl distribution by several
  megabytes; hence, this CPAN module tries to provide the rest of them.
  If you are using Perl 5.8 or later, Encode::CN and Encode::TW will
  automatically load the extra encodings for you, so there's no need to
  explicitly write use Encode::HanExtra if you are using one of them already.


pkgId: e45337241292af09d0ea47148f285e2763ea048a21556f52f0b97e64e4587f70
name: perl-Encode-IMAPUTF7
arch: noarch
version: 1.05
epoch: 0
release: 4.oe2503
summary: Encode::IMAPUTF7 Perl module
url: https://search.cpan.org/dist/Encode-IMAPUTF7/
rpm_license: GPL-1.0-or-later or Artistic-1.0
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Development/Libraries
rpm_buildhost: OERV-9950x-02
rpm_sourcerpm: perl-Encode-IMAPUTF7-1.05-4.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Encode-IMAPUTF7-1.05-4.oe2503.noarch.rpm
checksum_type: sha256
description:
  IMAP mailbox names are encoded in a modified UTF-7 when names contains
  international characters outside of the printable ASCII range. The
  modified UTF-7 encoding is defined in RFC2060(section 5.1.3).


pkgId: 81c224b33803f659ecaff62356964d1f250b9308c7eccf49d5334bc5f1995cf4
name: perl-Encode-JIS2K
arch: riscv64
version: 0.05
epoch: 0
release: 1.oe2503
summary: JIS X 0212 (aka JIS 2000) Encodings
url: https://metacpan.org/release/Encode-JIS2K
rpm_license: GPL+ or Artistic
rpm_group: Unspecified
rpm_buildhost: 905d2f94b9f0
rpm_sourcerpm: perl-Encode-JIS2K-0.05-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Encode-JIS2K-0.05-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This module implements encodings that covers JIS X 0213 charset (AKA JIS 2000,
  hence the module name).


pkgId: 5b921043674d565375e146457967c720ccc8e58068f02e1396e777beb364236a
name: perl-Encode-Locale
arch: noarch
version: 1.05
epoch: 0
release: 15.oe2503
summary: Determine the interfacing encoding
url: https://metacpan.org/release/Encode-Locale
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-Encode-Locale-1.05-15.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Encode-Locale-1.05-15.oe2503.noarch.rpm
checksum_type: sha256
description:
  The purpose of this Perl module is try determine what encodings should be used
  when interfacing to various external interfaces.


pkgId: 2433a57af5c2f56b21c9f70bab6bbf2a5ade05f744bf4a687df0ad3c8cba0ae0
name: perl-Encode-devel
arch: riscv64
version: 3.21
epoch: 4
release: 2.oe2503
summary: Perl Encode Module Generator
url: https://metacpan.org/release/Encode
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 36875890e581
rpm_sourcerpm: perl-Encode-3.21-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Encode-devel-3.21-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  enc2xs builds a Perl extension for use by Encode from either Unicode Character
  Mapping files (.ucm) or Tcl Encoding Files (.enc). You can use enc2xs to add
  your own encoding to perl. No knowledge of XS is necessary.

  With the encoding pragma, you can write your Perl script in any encoding you
  like (so long as the Encode module supports it) and still enjoy Unicode
  support.

  However, this encoding module is deprecated under perl 5.18. It uses
  a mechanism provided by perl that is deprecated under 5.18 and higher, and may
  be removed in a future version.

  The easiest and the best alternative is to write your script in UTF-8.


pkgId: 2097dff2c6c65ce1d9d1ade7bdc6d9f1f5d29aff8c84200fe4603b1b88d9d712
name: perl-Env
arch: noarch
version: 1.04
epoch: 0
release: 399.oe2503
summary: Perl module that imports environment variables as scalars or arrays
url: https://search.cpan.org/dist/Env/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-Env-1.04-399.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Env-1.04-399.oe2503.noarch.rpm
checksum_type: sha256
description:
  Perl maintains environment variables in a special hash named %ENV. For when
  this access method is inconvenient, the Perl module Env allows environment
  variables to be treated as scalar or array variables.


pkgId: cf9fa230f0a63577f1bc755e5620e972e150db63286d1ad48de8c6de7060f57b
name: perl-Error
arch: noarch
version: 0.17029
epoch: 1
release: 4.oe2503
summary: Error/exception handling in an OO-ish way
url: https://metacpan.org/release/Error
rpm_license: (GPL-1.0-or-later OR Artistic-1.0-Perl) and MIT
rpm_group: Unspecified
rpm_buildhost: d7035591b62d
rpm_sourcerpm: perl-Error-0.17029-4.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Error-0.17029-4.oe2503.noarch.rpm
checksum_type: sha256
description:
  The Error package provides two interfaces.
  Firstly Error provides a procedural interface to exception handling.
  Secondly Error is a base class for errors/exceptions that can either be thrown,
  for subsequent catch, or can simply be recorded.
  Errors in the class Error should not be thrown directly,
  but the user should throw errors from a sub-class of Error.


pkgId: 7d0b8eaac181344221f1522efd0e7e16f3801a058fb05072bb68530e1c0a2c9c
name: perl-Eval-Closure
arch: noarch
version: 0.14
epoch: 0
release: 2.oe2503
summary: Safely and cleanly create closures via string eval
url: https://metacpan.org/release/Eval-Closure
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: c250ebe2be09
rpm_sourcerpm: perl-Eval-Closure-0.14-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Eval-Closure-0.14-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  String eval is often used for dynamic code generation. For instance, Moose uses
  it heavily, to generate inlined versions of accessors and constructors, which
  speeds code up at runtime by a significant amount. String eval is not without
  its issues however - it's difficult to control the scope it's used in (which
  determines which variables are in scope inside the eval), and it can be quite
  slow, especially if doing a large number of evals.

  This module attempts to solve both of those problems. It provides an
  eval_closure function, which evals a string in a clean environment, other than
  a fixed list of specified variables. It also caches the result of the eval, so
  that doing repeated evals of the same source, even with a different
  environment, will be much faster (but note that the description is part of the
  string to be evaled, so it must also be the same (or non-existent) if caching
  is to work properly).


pkgId: f1f1a2e189698dc24aeb862bbb7197e1c15eea31e4c7659a85460fa35a00ff2a
name: perl-Eval-Closure-help
arch: noarch
version: 0.14
epoch: 0
release: 2.oe2503
summary: Safely and cleanly create closures via string eval
url: https://metacpan.org/release/Eval-Closure
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: c250ebe2be09
rpm_sourcerpm: perl-Eval-Closure-0.14-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Eval-Closure-help-0.14-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  String eval is often used for dynamic code generation. For instance, Moose
  uses it heavily, to generate inlined versions of accessors and
  constructors, which speeds code up at runtime by a significant amount.
  String eval is not without its issues however - it's difficult to control
  the scope it's used in (which determines which variables are in scope
  inside the eval), and it's easy to miss compilation errors, since eval
  catches them and sticks them in $@ instead.


pkgId: 82dff0bc144163295d0a0ee836fea535f263e57b0ea958a18f4b4c961a27e425
name: perl-Event-help
arch: riscv64
version: 1.28
epoch: 0
release: 2.oe2503
summary: Event loop processing
url: http://search.cpan.org/dist/Event/
rpm_license: GPL-1.0-only or Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Development/Libraries
rpm_buildhost: OERV-9950x-11
rpm_sourcerpm: perl-Event-1.28-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Event-help-1.28-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This extension aims to provide an simple and optimized event loop for a
  broad class of application.This package provides help docs for perl-Event.


pkgId: d91308292f4e4bb50ea1f0dc209b4d5a1a9e72a199717025272dadc9e948e2e6
name: perl-Exception-Class
arch: noarch
version: 1.45
epoch: 0
release: 2.oe2503
summary: Module that allows you to declare real exception classes in Perl
url: https://metacpan.org/release/Exception-Class
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 0b771fb33d08
rpm_sourcerpm: perl-Exception-Class-1.45-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Exception-Class-1.45-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  Exception::Class allows you to declare exception hierarchies in your
  modules in a "Java-esque" manner.


pkgId: 1b9cc0238d638ee0817d8cc5308724259f8b5f5b69f8c4929a54b64dbbbbbe1b
name: perl-Expect
arch: noarch
version: 1.38
epoch: 0
release: 2.oe2503
summary: EAutomate Interactions with Command Line Programs That Expose a Text Term
url: https://metacpan.org/release/Expect
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 9bb0eb35169c
rpm_sourcerpm: perl-Expect-1.38-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Expect-1.38-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  See an explanation of at https://code-maven.com/expect

  The Expect module is a successor of Comm.pl and a descendent of Chat.pl. It
  more closely resembles the Tcl Expect language than its predecessors. It
  does not contain any of the networking code found in Comm.pl. I suspect
  this would be obsolete anyway given the advent of IO::Socket and external
  tools such as netcat.


pkgId: 6e1c6eaef1c02ed67acf687b23b7b15f377e2353c2a256490b397f33ad4bd6e8
name: perl-Exporter
arch: noarch
version: 5.78
epoch: 0
release: 2.oe2503
summary: Implements default import method for modules
url: https://metacpan.org/release/Exporter
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-Exporter-5.78-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Exporter-5.78-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  The Exporter module implements an import method which allows a module to
  export functions and variables to its users' name spaces. Many modules use
  Exporter rather than implementing their own import method because Exporter
  provides a highly flexible interface, with an implementation optimized for
  the common case.


pkgId: 4c37d19e0e7bc83365282d989bdf45e184e09192ea224e6d1f0b791e4fa44f0a
name: perl-Exporter-Tiny
arch: noarch
version: 1.006002
epoch: 0
release: 2.oe2503
summary: An exporter with the features of Sub::Exporter but only core dependencies
url: https://metacpan.org/release/Exporter-Tiny
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 351e67710d9f
rpm_sourcerpm: perl-Exporter-Tiny-1.006002-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Exporter-Tiny-1.006002-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  Exporter::Tiny supports many of Sub::Exporter's external-facing features
  including renaming imported functions with the -as, -prefix and -suffix
  options; explicit destinations with the into option; and alternative
  installers with the installer option. But it's written in only about 40%
  as many lines of code and with zero non-core dependencies.
  Its internal-facing interface is closer to Exporter.pm, with configuration
  done through the @EXPORT, @EXPORT_OK and %EXPORT_TAGS package variables.


pkgId: 2c9cdad8f0b4c94a214b841589833e022589745b0bf80bf89b604646a3647f38
name: perl-ExtUtils-CBuilder
arch: noarch
version: 0.280236
epoch: 1
release: 2.oe2503
summary: Build the C portions of Perl modules
url: https://metacpan.org/release/ExtUtils-CBuilder
rpm_license: GPL-1.0-or-later or Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: b13550adc6f9
rpm_sourcerpm: perl-ExtUtils-CBuilder-0.280236-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-ExtUtils-CBuilder-0.280236-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module can build the C portions of Perl modules by invoking the
  appropriate compilers and linkers in a cross-platform manner. It was
  motivated by the 'Module::Build' project, but may be useful for other
  purposes as well. However, it is _not_ intended as a general cross-platform
  interface to all your C building needs. That would have been a much more
  ambitious goal!


pkgId: ff99354dcea00372441c9d1da82fbf6fe541bae3d03cfbc60100f650025309d1
name: perl-ExtUtils-CChecker
arch: noarch
version: 0.12
epoch: 0
release: 1.oe2503
summary: Configure-time utilities for using C headers, libraries, or OS features
url: http://search.cpan.org/dist/ExtUtils-CChecker/
rpm_license: GPL-1.0-only OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Development/Libraries
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-ExtUtils-CChecker-0.12-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-ExtUtils-CChecker-0.12-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  Often Perl modules are written to wrap functionality found in existing C
  headers, libraries, or to use OS-specific features. It is useful in the
  Build.PL or Makefile.PL file to check for the existance of these
  requirements before attempting to actually build the module.


pkgId: a76f7d9f69261b3f37b621f1fb0e2752a3b5e5c555c56607b495c885266ef18f
name: perl-ExtUtils-Command
arch: noarch
version: 7.71_02
epoch: 1
release: 1.oe2503
summary: Utilities to replace common UNIX commands in Makefiles
url: https://metacpan.org/release/ExtUtils-MakeMaker
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: a926d49a466a
rpm_sourcerpm: perl-ExtUtils-MakeMaker-7.71_02-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-ExtUtils-Command-7.71_02-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  The module is used to replace common UNIX commands. In all cases the functions work from @ARGV rather than taking arguments.
  This makes them easier to deal with in Makefiles.


pkgId: cfa82be8bacbbe082ba8cf2b51018f8a773279c7cf67e69b084cdf71bd916bfc
name: perl-ExtUtils-Depends
arch: noarch
version: 0.8001
epoch: 0
release: 1.oe2503
summary: Easily build XS extensions that depend on XS extensions
url: https://metacpan.org/release/ExtUtils-Depends
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 68d9de6d574b
rpm_sourcerpm: perl-ExtUtils-Depends-0.8001-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-ExtUtils-Depends-0.8001-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module tries to make it easy to build Perl extensions that use
  functions and typemaps provided by other Perl extensions. This means
  that a Perl extension is treated like a shared library that provides
  also a C and an XS interface besides the Perl one.


pkgId: 6ae9786d85e4e7122c6355cbe18db87afc13e69b6e8cc3edb6f7e3ff45713373
name: perl-ExtUtils-HasCompiler
arch: noarch
version: 0.025
epoch: 0
release: 1.oe2503
summary: Check for the presence of a compiler
url: http://search.cpan.org/dist/ExtUtils-HasCompiler/
rpm_license: GPL+ or Artistic
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Development/Libraries
rpm_buildhost: OERV-9950x-11
rpm_sourcerpm: perl-ExtUtils-HasCompiler-0.025-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-ExtUtils-HasCompiler-0.025-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module tries to check if the current system is capable of compiling,
  linking and loading an XS module.


pkgId: 22dd24739545bcbebefc608491c1a38c59e6a860f84510bcd0860186aadad1eb
name: perl-ExtUtils-InstallPaths
arch: noarch
version: 0.013
epoch: 0
release: 2.oe2503
summary: Build.PL install path logic made easy
url: https://metacpan.org/release/ExtUtils-InstallPaths
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 660100f835aa
rpm_sourcerpm: perl-ExtUtils-InstallPaths-0.013-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-ExtUtils-InstallPaths-0.013-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This package contains the module of ExtUtils::InstallPaths that contains the
  Build.PL file which could make install path easy.


pkgId: 41dbb890abe88ff0bb0a302fedc33f921498581e41beecd1c03f5964a746b378
name: perl-ExtUtils-LibBuilder
arch: noarch
version: 0.08
epoch: 0
release: 2.oe2503
summary: ExtUtils::LibBuilder Perl module
url: https://search.cpan.org/dist/ExtUtils-LibBuilder/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Development/Libraries
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-ExtUtils-LibBuilder-0.08-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-ExtUtils-LibBuilder-0.08-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  Some Perl modules need to ship C libraries together with their Perl code.
  Although there are mechanisms to compile and link (or glue) C code in your
  Perl programs, there isn't a clear method to compile standard, self-
  contained C libraries.


pkgId: 3a493399488d2c715518792ec913c9c11b9529da336520a18ef3f2562f5ab87b
name: perl-ExtUtils-MakeMaker
arch: noarch
version: 7.71_02
epoch: 1
release: 1.oe2503
summary: Create Makefile
url: https://metacpan.org/release/ExtUtils-MakeMaker
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: a926d49a466a
rpm_sourcerpm: perl-ExtUtils-MakeMaker-7.71_02-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-ExtUtils-MakeMaker-7.71_02-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  This utility is designed to write a Makefile for an extension module from a Makefile.PL.
  It is based on the Makefile.SH model provided by Andy Dougherty and the perl5-porters.

  It splits the task of generating the Makefile into several subroutines that can be individually overridden.
  Each subroutine returns the text it wishes to have written to the Makefile.

  As there are various Make programs with incompatible syntax, which use operating system shells, again with incompatible syntax,
  it is important for users of this module to know which flavour of Make a Makefile has been written for so they'll use the correct one
  and won't have to face the possibly bewildering errors resulting from using the wrong one.

  On POSIX systems, that program will likely be GNU Make; on Microsoft Windows, it will be either Microsoft NMake, DMake or GNU Make.
  See the section on the "MAKE" parameter for details.

  ExtUtils::MakeMaker (EUMM) is object oriented. Each directory below the current directory that contains a Makefile.PL is treated as a separate object.
  This makes it possible to write an unlimited number of Makefiles with a single invocation of WriteMakefile().

  All inputs to WriteMakefile are Unicode characters, not just octets. EUMM seeks to handle all of these correctly.
  It is currently still not possible to portably use Unicode characters in module names, because this requires Perl to handle Unicode filenames,
  which is not yet the case on Windows.


pkgId: fc446030c1d2ed444a51bb7925a12aa448d04b953c433ae52e93bd974ffbda55
name: perl-ExtUtils-ParseXS
arch: noarch
version: 3.51
epoch: 2
release: 2.oe2503
summary: Convert Perl XS code into C code
url: https://metacpan.org/pod/ExtUtils::ParseXS
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 57a6c7311e3e
rpm_sourcerpm: perl-ExtUtils-ParseXS-3.51-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-ExtUtils-ParseXS-3.51-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  ExtUtils::ParseXS will compile XS code into C code by embedding the constructs necessary to let C functions manipulate Perl values
  and creates the glue necessary to let Perl access those functions.
  The compiler uses typemaps to determine how to map C function parameters and variables to Perl values.


pkgId: 9d116d755ed6ec05de8faa86e538f2ce131bb14ff9f3b1b148621fb29cb7938c
name: perl-ExtUtils-PkgConfig
arch: noarch
version: 1.16
epoch: 0
release: 2.oe2503
summary: Simplistic interface to pkg-config
url: http://search.cpan.org/dist/ExtUtils-PkgConfig/
rpm_license: LGPL-2.1-only
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Development/Libraries
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-ExtUtils-PkgConfig-1.16-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-ExtUtils-PkgConfig-1.16-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  The pkg-config program retrieves information about installed libraries,
  usually for the purposes of compiling against and linking to them.


pkgId: ea8e0c821e204ffecb964e25dd95a86a87aa3235fd0ead1795190dbe22d4d58b
name: perl-FFI-CheckLib
arch: noarch
version: 0.31
epoch: 0
release: 2.oe2503
summary: FFI::CheckLib Perl module
url: https://metacpan.org/release/FFI-CheckLib
rpm_license: GPL+ or Artistic
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Development/Libraries
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-FFI-CheckLib-0.31-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-FFI-CheckLib-0.31-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This Perl module checks whether a particular dynamic library is available for
  Foreign Function Interface (FFI) to use. It is modeled heavily on
  Devel::CheckLib, but will find dynamic libraries even when development
  packages are not installed. It also provides a find_lib function that will
  return the full path to the found dynamic library, which can be feed directly
  into FFI::Platypus or FFI::Raw.


pkgId: fd933259cff6ba3a5462c32afb09651921eba916d92a82fddc430690b876c0f8
name: perl-Fedora-VSP
arch: noarch
version: 0.001
epoch: 0
release: 10.oe2503
summary: Perl version normalization for RPM
url: https://ppisar.fedorapeople.org/Fedora-VSP/
rpm_license: GPLv3+
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-Fedora-VSP-0.001-10.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Fedora-VSP-0.001-10.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module provides functions for normalizing Perl version strings for
  Red Hat Package (RPM) based Linux distributions.


pkgId: e35b63351ab3d3eedcb21bb0f4b132a29966862da924429b8225a359088b02dd
name: perl-File-BaseDir
arch: noarch
version: 0.09
epoch: 0
release: 3.oe2503
summary: Use the Freedesktop.org base directory specification
url: https://metacpan.org/release/File-BaseDir
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-File-BaseDir-0.09-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-File-BaseDir-0.09-3.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module can be used to find directories and files as specified by the Freedesktop.org Base
  Directory Specification. This specifications gives a mechanism to locate directories for
  configuration, application data and cache data. It is suggested that desktop applications for
  e.g. the Gnome, KDE or Xfce platforms follow this layout. However, the same layout can just
  as well be used for non-GUI applications.


pkgId: 6e530c2c16c4adb7ee21aea4d07c01abdeb98518e80b7554bccbaa760a20db10
name: perl-File-CheckTree
arch: noarch
version: 4.42
epoch: 0
release: 305.oe2503
summary: On a tree to run many file-test checks
url: https://metacpan.org/release/File-CheckTree
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-File-CheckTree-4.42-305.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-File-CheckTree-4.42-305.oe2503.noarch.rpm
checksum_type: sha256
description:
  The package is to run many file-test checks on a tree.
  File::CheckTree::validate() routine takes a single multi-line string consisting of directives,
  each containing a file name plus a file test to try on it. After the file test you may put ||
  die to make it a fatal error if the file test fails. The default is || warn.


pkgId: cd1a5e2ca577173076d39d12b2fd57b0974b57bb844a4b4ca87aa4c22809f92d
name: perl-File-Copy-Recursive
arch: noarch
version: 0.45
epoch: 0
release: 2.oe2503
summary: Perl extension for recursively copying files and directories
url: https://metacpan.org/release/File-Copy-Recursive
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-File-Copy-Recursive-0.45-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-File-Copy-Recursive-0.45-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module has 3 functions, one to copy files only, one to copy directories
  only and one to do either depending on the argument's type.


pkgId: 1f17e3db7558e7f39f7e62f8349d1ee88ad7ac67570b994c9d1a5c9711045a57
name: perl-File-DesktopEntry
arch: noarch
version: 0.22
epoch: 0
release: 12.oe2503
summary: Object to handle .desktop files
url: https://metacpan.org/release/File-DesktopEntry
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-File-DesktopEntry-0.22-12.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-File-DesktopEntry-0.22-12.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module is designed to work with .desktop files. The format of these files is
  specified by the freedesktop "Desktop Entry" specification. This module can parse
  these files but also knows how to run the applications defined by these files.


pkgId: df765f4c53b86706a274cc97a49b3b5e47fec07ea9760ec1322e970aa7c779f6
name: perl-File-FcntlLock
arch: riscv64
version: 0.22
epoch: 0
release: 2.oe2503
summary: File locking with fcntl(2)
url: http://search.cpan.org/dist/File-FcntlLock/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: 39020a6f3c52
rpm_sourcerpm: perl-File-FcntlLock-0.22-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-File-FcntlLock-0.22-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  File locking in Perl is usually done using the flock function.
  Unfortunately, this only allows locks on whole files and is often
  implemented in terms of the flock(2) system function which has some
  shortcomings (especially concerning locks on remotely mounted file systems)
  and slightly different behaviour than fcntl(2).


pkgId: c0d44c80e7fd3d46deb28cfb74e8b4e7eaf4fdef5f38b0198b7a6e28d51e2cd9
name: perl-File-Fetch
arch: noarch
version: 1.04
epoch: 0
release: 2.oe2503
summary: A generic file fetching mechanism
url: https://perldoc.perl.org/File/Fetch.html
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 328279d9455b
rpm_sourcerpm: perl-File-Fetch-1.04-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-File-Fetch-1.04-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  File::Fetch is a generic file fetching mechanism.
  It allows you to fetch any file pointed to by a ftp , http , file , git or rsync uri by a number of different means.
  See the HOW IT WORKS section further down for details.


pkgId: 5ed4eb3c50dc3b7d13eb26b3914866d485f9aac097ce92736771f287fdab54e5
name: perl-File-Find-Rule
arch: noarch
version: 0.34
epoch: 0
release: 4.oe2503
summary: Alternative interface to File::Find
url: https://search.cpan.org/dist/File-Find-Rule/
rpm_license: GPL-1.0-or-later or Artistic-1.0
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Development/Libraries
rpm_buildhost: OERV-9950x-11
rpm_sourcerpm: perl-File-Find-Rule-0.34-4.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-File-Find-Rule-0.34-4.oe2503.noarch.rpm
checksum_type: sha256
description:
  File::Find::Rule is a friendlier interface to File::Find. It allows you to
  build rules which specify the desired files and directories.


pkgId: 9f34dc8e9f9771b199c9176c587c9e2bc051732d86476a3929f51175409d0697
name: perl-File-Find-Rule-Perl
arch: noarch
version: 1.16
epoch: 0
release: 2.oe2503
summary: Common rules for searching for Perl things
url: https://search.cpan.org/dist/File-Find-Rule-Perl/
rpm_license: GPL-1.0-or-later or Artistic-1.0
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Development/Libraries
rpm_buildhost: OERV-9950x-11
rpm_sourcerpm: perl-File-Find-Rule-Perl-1.16-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-File-Find-Rule-Perl-1.16-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  I write a lot of things that muck with Perl files. And it always annoyed
  me that finding "perl files" requires a moderately complex
  File::Find::Rule pattern.


pkgId: 99d1f9b50a56cd25b94b8b9576f3a7e21d4131d7e1d4313d46d994021827e63d
name: perl-File-HomeDir
arch: noarch
version: 1.006
epoch: 0
release: 4.oe2503
summary: A tool to find your home and other directories on any platform
url: https://metacpan.org/release/File-HomeDir
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 804d2957d328
rpm_sourcerpm: perl-File-HomeDir-1.006-4.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-File-HomeDir-1.006-4.oe2503.noarch.rpm
checksum_type: sha256
description:
  File::HomeDir is a module for locating the directories that are "owned"
  by a user (typically your user) and to solve the various issues that
  arise trying to find them consistently across a wide variety of
  platforms.


pkgId: cc2faac5248cd62544a41bb5fad24bc544ed1d5863ea8366f485a8b11e99b58e
name: perl-File-Listing
arch: noarch
version: 6.16
epoch: 0
release: 1.oe2503
summary: Parse directory listing
url: https://metacpan.org/release/File-Listing
rpm_license: GPL+ or Artistic
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-10
rpm_sourcerpm: perl-File-Listing-6.16-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-File-Listing-6.16-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module exports a single function called parse_dir(), which can be used to parse directory listings.


pkgId: 57e02e37a63a23d8fcad0a00a0306c018b80f100ce2c43899689dccb04e4ed58
name: perl-File-MimeInfo
arch: noarch
version: 0.35
epoch: 0
release: 3.oe2503
summary: Implement the freedesktop specification
url: https://metacpan.org/release/File-MimeInfo
rpm_license: GPL-1.0-or-later or Artistic-1.0
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-10
rpm_sourcerpm: perl-File-MimeInfo-0.35-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-File-MimeInfo-0.35-3.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module can be used to determine the mime type of a file; it's a replacement
  for File::MMagic trying to implement the freedesktop specification for using the
  shared mime-info database. The package comes with a script called mimetype that
  can be used as a file(1) work-alike.


pkgId: 8f70776c1385cdd0ddf6ad7f462c0ad2e63b11f6786ac2e8cdb8ea85fedd5a01
name: perl-File-Path
arch: noarch
version: 2.18
epoch: 0
release: 3.oe2503
summary: Create or remove directory trees
url: https://metacpan.org/pod/File::Path
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: b36705fb91ce
rpm_sourcerpm: perl-File-Path-2.18-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-File-Path-2.18-3.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module provides a convenient way to create directories
  of arbitrary depth and to delete an entire directory subtree
  from the filesystem.


pkgId: 173dff98b68182f68cd116bed4f7471bf30bbab5a2a6b72a30b7e450eafa51d4
name: perl-File-ReadBackwards
arch: noarch
version: 1.06
epoch: 0
release: 3.oe2503
summary: Read a file backwards by lines
url: https://metacpan.org/release/File-ReadBackwards
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Development/Libraries
rpm_buildhost: OERV-9950x-10
rpm_sourcerpm: perl-File-ReadBackwards-1.06-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-File-ReadBackwards-1.06-3.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module reads a file backwards line by line. It is simple to use,
  memory efficient and fast. It supports both an object and a tied handle
  interface.


pkgId: 21df6ba7376013623768e6035be2163bcb1560741f86c52353d7106011a6c8a8
name: perl-File-ShareDir
arch: noarch
version: 1.118
epoch: 0
release: 3.oe2503
summary: Locate per-dist and per-module shared files
url: https://metacpan.org/release/File-ShareDir
rpm_license: (GPL-1.0-or-later OR Artistic-1.0-Perl) and Apache-2.0
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-File-ShareDir-1.118-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-File-ShareDir-1.118-3.oe2503.noarch.rpm
checksum_type: sha256
description:
  The intent of File::ShareDir is to provide a companion to Class::Inspector
  and File::HomeDir, modules that take a process that is well-known by
  advanced Perl developers but gets a little tricky, and make it more
  available to the larger Perl community.


pkgId: fa5de980b39e475f15a83561d12493a18ad40070404b0357a8c2d654504f2755
name: perl-File-ShareDir-Install
arch: noarch
version: 0.14
epoch: 0
release: 2.oe2503
summary: Install shared files
url: https://metacpan.org/release/File-ShareDir-Install
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-File-ShareDir-Install-0.14-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-File-ShareDir-Install-0.14-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  File::ShareDir::Install allows you to install read-only data files from a
  distribution. It is a companion module to File::ShareDir, which allows you
  to locate these files after installation.


pkgId: 70917ac675facb7a8274e2e6608910774fcb9d5b942f869c5ce23febe6c2cfa0
name: perl-File-Slurp
arch: noarch
version: 9999.32
epoch: 0
release: 1.oe2503
summary: Simple and Efficient Reading/Writing/Modifying of Complete File
url: https://metacpan.org/release/File-Slurp
rpm_license: GPL+ or Artistic
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-File-Slurp-9999.32-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-File-Slurp-9999.32-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module provides subs that allow you to read or write entire files with
  one simple call. They are designed to be simple to use, have flexible ways
  to pass in or get the file contents and to be very efficient. There is also
  a sub to read in all the files in a directory.


pkgId: aee16c9818869a02d9732a653aaa4757418746689c66ecd5fdb8f77502de951d
name: perl-File-Slurper
arch: noarch
version: 0.014
epoch: 0
release: 1.oe2503
summary: Simple, sane and efficient module to slurp a file
url: https://search.cpan.org/dist/File-Slurper/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Development/Libraries
rpm_buildhost: c0667eb02a54
rpm_sourcerpm: perl-File-Slurper-0.014-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-File-Slurper-0.014-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module provides functions for fast and correct slurping and spewing.
  All functions are optionally exported. All functions throw exceptions on
  errors, write functions don't return any meaningful value.


pkgId: 89fbd09278f9c5cbecb98103f137e6de0886149232cb90ade998ca9cd2f00a9c
name: perl-File-Sync
arch: riscv64
version: 0.11
epoch: 0
release: 21.oe2503
summary: Perl access to fsync() and sync() function calls
url: https://metacpan.org/release/File-Sync
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: f93079fc5f32
rpm_sourcerpm: perl-File-Sync-0.11-21.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-File-Sync-0.11-21.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The fsync() function takes a Perl file handle as its only argument, and
  passes its fileno() to the C function fsync(). It returns undef on failure,
  or true on success.


pkgId: 2c8361275f47eac4be52110aa52d2d1ab5bee14f93cae6c4abcced2d83a66df8
name: perl-File-Temp
arch: noarch
version: 0.2311
epoch: 1
release: 4.oe2503
summary: Return name and handle of a temporary file safely
url: https://metacpan.org/release/File-Temp
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 5dc6fb0252a2
rpm_sourcerpm: perl-File-Temp-0.2311-4.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-File-Temp-0.2311-4.oe2503.noarch.rpm
checksum_type: sha256
description:
  File::Temp can be used to create and open temporary files in a safe way.
  There is both a function interface and an object-oriented interface. The
  File::Temp constructor or the tempfile() function can be used to return the
  name and the open file handle of a temporary file. The tempdir() function
  can be used to create a temporary directory.

  The security aspect of temporary file creation is emphasized such that a
  filehandle and filename are returned together.
  This helps guarantee that a race condition can not occur where the temporary
  file is created by another process between checking for the existence of the
  file and its opening. Additional security levels are provided to check,
  for example, that the sticky bit is set on world writable directories.
  See "safe_level" for more information.

  For compatibility with popular C library functions, Perl implementations of
  the mkstemp() family of functions are provided. These are, mkstemp(),
  mkstemps(), mkdtemp() and mktemp().

  Additionally, implementations of the standard POSIX tmpnam() and tmpfile()
  functions are provided if required.

  Implementations of mktemp(), tmpnam(), and tempnam() are provided, but should
  be used with caution since they return only a filename that was valid when
  function was called, so cannot guarantee that the file will not exist by the
  time the caller opens the filename.

  Filehandles returned by these functions support the seekable methods.


pkgId: 8bffe2a42f8a01d2d5602dd1ca0128304c74ffc4d0df734e32c0a1bfc85ef990
name: perl-File-Which
arch: noarch
version: 1.27
epoch: 0
release: 3.oe2503
summary: Perl implementation of the which utility as an API
url: https://metacpan.org/release/File-Which
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-File-Which-1.27-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-File-Which-1.27-3.oe2503.noarch.rpm
checksum_type: sha256
description:
  File::Which finds the full or relative paths to executable programs on the system. This is
  normally the function of which utility. which is typically implemented as either a program
  or a built in shell command. On some platforms, such as Microsoft Windows it is not provided
  as part of the core operating system. This module provides a consistent API to this
  functionality regardless of the underlying platform.

  The focus of this module is correctness and portability. As a consequence platforms where the
  current directory is implicitly part of the search path such as Microsoft Windows will find
  executables in the current directory, whereas on platforms such as UNIX where this is not the
  case executables in the current directory will only be found if the current directory is
  explicitly added to the path.

  If you need a portable which on the command line in an environment that does not provide it,
  install App::pwhich which provides a command line interface to this API.


pkgId: b51b663490839277a9e87a5b646d42c07ae7d018572112861a02e8c9cd892781
name: perl-File-chdir
arch: noarch
version: 0.1011
epoch: 0
release: 4.oe2503
summary: More sensible way to change directories
url: https://search.cpan.org/dist/File-chdir/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-File-chdir-0.1011-4.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-File-chdir-0.1011-4.oe2503.noarch.rpm
checksum_type: sha256
description:
  Perl's chdir() has the unfortunate problem of being very, very, very
  global. If any part of your program calls chdir() or if any library you
  use calls chdir(), it changes the current working directory for the
  *whole* program.


pkgId: e8ad87a3bf4731b6f3ecbe97ba5aeb730e163a71d12025edf3580014d26d829d
name: perl-File-pushd
arch: noarch
version: 1.016
epoch: 0
release: 7.oe2503
summary: Change directory temporarily for a limited scope
url: https://metacpan.org/release/File-pushd
rpm_license: ASL 2.0
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-10
rpm_sourcerpm: perl-File-pushd-1.016-7.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-File-pushd-1.016-7.oe2503.noarch.rpm
checksum_type: sha256
description:
  File::pushd does a temporary "chdir" that is easily and automatically
  reverted, similar to "pushd" in some Unix command shells. It works by
  creating an object that caches the original working directory. When the
  object is destroyed, the destructor calls "chdir" to revert to the
  original working directory. By storing the object in a lexical variable
  with a limited scope, this happens automatically at the end of the
  scope.

  This is very handy when working with temporary directories for tasks
  like testing; a function is provided to streamline getting a temporary
  directory from File::Temp.

  For convenience, the object stringifies as the canonical form of the
  absolute pathname of the directory entered.

  Warning: if you create multiple "pushd" objects in the same lexical
  scope, their destruction order is not guaranteed and you might not wind
  up in the directory you expect.


pkgId: 8a60e4969c9a0f62ae1de5fcacd10d4a752083d251eef5f37675e89ebbbd386f
name: perl-Filter
arch: riscv64
version: 1.64
epoch: 2
release: 2.oe2503
summary: Perl source filters
url: https://metacpan.org/release/Filter
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: db24472eb7b3
rpm_sourcerpm: perl-Filter-1.64-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Filter-1.64-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Source filters alter the program text of a module before Perl sees it, much as
  a C preprocessor alters the source text of a C program before the compiler
  sees it.


pkgId: 4ef75057f6911934e4b5ac99d18284e151fefd8154649d15e66e2c3fa9e05a17
name: perl-Filter-Simple
arch: noarch
version: 0.94
epoch: 1
release: 3.oe2503
summary: Simplified Perl source filtering
url: https://metacpan.org/release/Filter-Simple
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-10
rpm_sourcerpm: perl-Filter-Simple-0.94-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Filter-Simple-0.94-3.oe2503.noarch.rpm
checksum_type: sha256
description:
  The Filter::Simple Perl module provides a simplified interface to
  Filter::Util::Call; one that is sufficient for most common cases.


pkgId: 2d1c8442a30e79e7878c655c4518a4b0f6fe93defef9ef49968a89e30c3ebc06
name: perl-Font-TTF
arch: noarch
version: 1.06
epoch: 0
release: 9.oe2503
summary: Perl library for modifying TTF font files
url: https://metacpan.org/release/Font-TTF
rpm_license: Artistic 2.0
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-11
rpm_sourcerpm: perl-Font-TTF-1.06-9.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Font-TTF-1.06-9.oe2503.noarch.rpm
checksum_type: sha256
description:
  The package provides perl module for TrueType font hacking. It supports reading,
  processing and writing of the tables.you can do almost anything with a standard
  TrueType font with this module.


pkgId: 59384651326f9aabd909722a3441eee5183e21a9c2ec82307d3ef454b68a2e66
name: perl-Font-TTF-XMLparse
arch: noarch
version: 1.06
epoch: 0
release: 9.oe2503
summary: Parser for XML Font
url: https://metacpan.org/release/Font-TTF
rpm_license: Artistic 2.0
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-11
rpm_sourcerpm: perl-Font-TTF-1.06-9.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Font-TTF-XMLparse-1.06-9.oe2503.noarch.rpm
checksum_type: sha256
description:
  The package provides  a perl module .It contains the support routines for generating
  the TrueType font structures and parsing XML as a result.


pkgId: 7ce2b4eee6fe0d2b81f738f9c2beb52d4aa7d538770c6d7e2e65869fbffbaff7
name: perl-GD
arch: riscv64
version: 2.82
epoch: 0
release: 2.oe2503
summary: A perl5 interface to Thomas Boutell's gd library
url: https://metacpan.org/release/GD
rpm_license: GPL-1.0-or-later OR Artistic-2.0
rpm_group: Unspecified
rpm_buildhost: 54c86124c221
rpm_sourcerpm: perl-GD-2.82-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-GD-2.82-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This is a autoloadable interface module for libgd, a popular library
  for creating and manipulating PNG files.  With this library you can
  create PNG images on the fly or modify existing files.  Features
  include:

  a.  lines, polygons, rectangles and arcs, both filled and unfilled
  b.  flood fills
  c.  the use of arbitrary images as brushes and as tiled fill patterns
  d.  line styling (dashed lines and the like)
  e.  horizontal and vertical text rendering
  f.  support for transparency and interlacing
  g.  support for TrueType font rendering, via libfreetype.
  h.  support for spline curves, via GD::Polyline
  i.  support for symbolic font names, such as "helvetica:italic"
  j.  support for symbolic color names, such as "green", via GD::Simple
  k.  produces output in png, gif, jpeg and xbm format
  l.  produces output in svg format via GD::SVG.


pkgId: 1a66b2593a7b076a7a4c3cae734e1303a4324f94bc50249b59c1830114351631
name: perl-Getopt-Long
arch: noarch
version: 2.58
epoch: 1
release: 2.oe2503
summary: Extended processing of command line options
url: https://metacpan.org/pod/Getopt::Long
rpm_license: GPL-2.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-Getopt-Long-2.58-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Getopt-Long-2.58-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  Module Getopt::Long implements an extended getopt function called
  GetOptions(). This function implements the POSIX standard for command
  line options, with GNU extensions, while still capable of handling
  the traditional one-letter options.


pkgId: a1be181deea906c59e5b3c2f6063ae4d438bf40dbd8eb310740d241328cfa933
name: perl-Glib
arch: riscv64
version: 1.3294
epoch: 0
release: 3.oe2503
summary: Perl wrappers for the GLib utility and Object libraries
url: http://search.cpan.org/dist/Glib/
rpm_license: LGPL-2.1-or-later
rpm_group: Development/Libraries
rpm_buildhost: caac75640b9d
rpm_sourcerpm: perl-Glib-1.3294-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Glib-1.3294-3.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This wrapper attempts to provide a perlish interface while remaining as
  true as possible to the underlying C API, so that any reference materials
  you can find on using GLib may still apply to using the libraries from
  perl. This module also provides facilities for creating wrappers for other
  GObject-based libraries. The "SEE ALSO" section contains pointers to all
  sorts of good information.


pkgId: 6f097969a762409bc96eef03260bd19815e759dc510cab12acbd8e3f5c147948
name: perl-Guard
arch: riscv64
version: 1.023
epoch: 0
release: 4.oe2503
summary: Safe cleanup blocks
url: https://search.cpan.org/dist/Guard/
rpm_license: GPL-1.0-or-later or Artistic-1.0
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Development/Libraries
rpm_buildhost: OERV-9950x-13
rpm_sourcerpm: perl-Guard-1.023-4.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Guard-1.023-4.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This module implements so-called "guards". A guard is something
  (usually an object) that "guards" a resource, ensuring that it is
  cleaned up when expected.


pkgId: 24ff01a3f8f745526d288f14f4dd408de3640fe9c65e7b52b18f6463b678b649
name: perl-HTML-Form
arch: noarch
version: 6.12
epoch: 0
release: 2.oe2503
summary: Class that represents an HTML form element
url: https://metacpan.org/release/HTML-Form
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Development/Libraries
rpm_buildhost: OERV-9950x-02
rpm_sourcerpm: perl-HTML-Form-6.12-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-HTML-Form-6.12-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  Objects of the HTML::Form class represents a single HTML <form> ... </form>
  instance. A form consists of a sequence of inputs that usually have names,
  and which can take on various values. The state of a form can be tweaked
  and it can then be asked to provide HTTP::Request objects that can be
  passed to the request() method of LWP::UserAgent.


pkgId: a72e28a5f191dd5c92fce41c700ca7d9ac2acd3cd440fcfa24be9208c12f1686
name: perl-HTML-Parser
arch: riscv64
version: 3.83
epoch: 0
release: 1.oe2503
summary: HTML parser
url: https://metacpan.org/release/HTML-Parser
rpm_license: GPL+ or Artistic
rpm_group: Unspecified
rpm_buildhost: a2210cad881e
rpm_sourcerpm: perl-HTML-Parser-3.83-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-HTML-Parser-3.83-1.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Objects of the HTML::Parser class will recognize markup and separate it
  from plain text (alias data content) in HTML documents. As different kinds
  of markup and text are recognized, the corresponding event handlers are invoked.


pkgId: ed17aa1af2d0e7fc3dabec8619f7ef9ed63f77cd3c0ac3aa59c384349d19292f
name: perl-HTML-Scrubber
arch: noarch
version: 0.19
epoch: 0
release: 2.oe2503
summary: Perl extension for scrubbing/sanitizing HTML
url: https://search.cpan.org/dist/HTML-Scrubber/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Development/Libraries
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-HTML-Scrubber-0.19-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-HTML-Scrubber-0.19-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  If you want to "scrub" or "sanitize" html input in a reliable and flexible
  fashion, then this module is for you.


pkgId: 65ded60db51556556cef53bfe31be77cba6b72e87e038f15d7671dc754b90621
name: perl-HTML-Tree
arch: noarch
version: 5.07
epoch: 0
release: 2.oe2503
summary: HTML tree handling modules for Perl
url: https://metacpan.org/release/HTML-Tree
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-11
rpm_sourcerpm: perl-HTML-Tree-5.07-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-HTML-Tree-5.07-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This distribution contains a suite of modules for representing,
  creating, and extracting information from HTML syntax trees; there is
  also relevant documentation.  These modules used to be part of the
  libwww-perl distribution, but are now unbundled in order to facilitate
  a separate development track.


pkgId: a3c0cbed40442b3d7928df4e48702b13dacbbcabcca55bc457e72ef246609fa1
name: perl-HTTP-Cookies
arch: noarch
version: 6.11
epoch: 0
release: 1.oe2503
summary: HTTP cookie jars
url: https://metacpan.org/release/HTTP-Cookies
rpm_license: GPL+ or Artistic
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-13
rpm_sourcerpm: perl-HTTP-Cookies-6.11-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-HTTP-Cookies-6.11-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  This class is for objects that represent a "cookie jar" -- that is, a
  database of all the HTTP cookies that a given LWP::UserAgent object
  knows about.


pkgId: a1d706e6173235c40b216ae01d846b3fdd1c4c6b68bc38102c98459428af3cd6
name: perl-HTTP-Daemon
arch: noarch
version: 6.16
epoch: 0
release: 1.oe2503
summary: A simple http server class
url: http://search.cpan.org/dist/HTTP-Daemon/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-11
rpm_sourcerpm: perl-HTTP-Daemon-6.16-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-HTTP-Daemon-6.16-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  Instances of the `HTTP::Daemon' class are HTTP/1.1 servers that listen
  on a socket for incoming requests. The `HTTP::Daemon' is a subclass of
  `IO::Socket::INET', so you can perform socket operations directly on it
  too.

  The accept() method will return when a connection from a client is
  available. The returned value will be an `HTTP::Daemon::ClientConn'
  object which is another `IO::Socket::INET' subclass. Calling the
  get_request() method on this object will read data from the client and
  return an `HTTP::Request' object. The ClientConn object also provide
  methods to send back various responses.

  This HTTP daemon does not fork(2) for you. Your application, i.e. the
  user of the `HTTP::Daemon' is responsible for forking if that is
  desirable. Also note that the user is responsible for generating
  responses that conform to the HTTP/1.1 protocol.


pkgId: d9d697b2ca3e0888b68b640e8145ea26f6ff3274506ff0792b4c63a3d8e5092e
name: perl-HTTP-Date
arch: noarch
version: 6.06
epoch: 0
release: 1.oe2503
summary: Date conversion routines
url: https://metacpan.org/release/HTTP-Date
rpm_license: GPL+ or Artistic
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Development/Libraries
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-HTTP-Date-6.06-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-HTTP-Date-6.06-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module provides functions that deal the date formats used by the HTTP
  protocol (and then some more). Only the first two functions, time2str() and
  str2time(), are exported by default.


pkgId: a8489215f5e9d3e8febcd10cb4e7c51fd9605a1c2a7d2470e585bcdae79fb4d5
name: perl-HTTP-Message
arch: noarch
version: 6.45
epoch: 0
release: 1.oe2503
summary: HTTP style message
url: https://metacpan.org/release/HTTP-Message
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-HTTP-Message-6.45-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-HTTP-Message-6.45-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  An HTTP::Message object contains some headers and a content body.
  The following methods are available:
  $mess = HTTP::Message->new
  $mess = HTTP::Message->new( $headers )
  $mess = HTTP::Message->new( $headers, $content )


pkgId: 53f043e45e166f752ce8252df13a937591639dd1b4205bd53866a8604b7d4daa
name: perl-HTTP-Negotiate
arch: noarch
version: 6.01
epoch: 0
release: 23.oe2503
summary: Choose a variant to serve
url: https://metacpan.org/release/HTTP-Negotiate
rpm_license: GPL+ or Artistic
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-HTTP-Negotiate-6.01-23.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-HTTP-Negotiate-6.01-23.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module provides a complete implementation of the HTTP content negotiation algorithm specified in
  draft-ietf-http-v11-spec-00.ps chapter 12. Content negotiation allows for the selection of a preferred
  content representation based upon attributes of the negotiable variants and the value of the various
  Accept* header fields in the request.


pkgId: 9ff91101e05d03a936ef0a52626954bfec500b2bf5d57d53bc1024f140f6a201
name: perl-HTTP-Server-Simple
arch: noarch
version: 0.52
epoch: 0
release: 2.oe2503
summary: Lightweight HTTP server
url: https://search.cpan.org/dist/HTTP-Server-Simple/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Development/Libraries
rpm_buildhost: OERV-9950x-10
rpm_sourcerpm: perl-HTTP-Server-Simple-0.52-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-HTTP-Server-Simple-0.52-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This is a simple standalone HTTP server. By default, it doesn't thread or
  fork. It does, however, act as a simple frontend which can be used to build
  a standalone web-based application or turn a CGI into one.


pkgId: 48da3bb050f8c2e01bb121635069130773873cd812461567fe2bfc821d263ea8
name: perl-HTTP-Tiny
arch: noarch
version: 0.088
epoch: 0
release: 2.oe2503
summary: A small, simple, correct HTTP/1.1 client
url: https://metacpan.org/release/HTTP-Tiny
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-HTTP-Tiny-0.088-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-HTTP-Tiny-0.088-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This is a very simple HTTP/1.1 client, designed for doing simple requests
  without the overhead of a large framework like LWP::UserAgent.

  It is more correct and more complete than HTTP::Lite. It supports proxies and
  redirection. It also correctly resumes after EINTR.

  If IO::Socket::IP 0.25 or later is installed, HTTP::Tiny will use it instead
  of IO::Socket::INET for transparent support for both IPv4 and IPv6.

  Cookie support requires HTTP::CookieJar or an equivalent class.


pkgId: f9861e422a715be3cd799276ce8fdf3c7e24fdbd0e8a9c3e1fd4182af637213c
name: perl-HTTP-Tinyish
arch: noarch
version: 0.19
epoch: 0
release: 2.oe2503
summary: HTTP::Tiny compatible HTTP client wrappers
url: https://metacpan.org/release/HTTP-Tinyish
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Development/Libraries
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-HTTP-Tinyish-0.19-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-HTTP-Tinyish-0.19-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  HTTP::Tinyish is a wrapper module for HTTP client modules LWP, HTTP::Tiny
  and HTTP client software curl and wget.


pkgId: 4498d5e02e446d85f9b27b2b664b864a0889810e20dcac9647c4b35f2fdf1115
name: perl-Hash-Merge-Simple
arch: noarch
version: 0.051
epoch: 0
release: 1.oe2503
summary: Recursively merge two or more hashes, simply
url: https://metacpan.org/release/Hash-Merge-Simple
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 67466b56814b
rpm_sourcerpm: perl-Hash-Merge-Simple-0.051-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Hash-Merge-Simple-0.051-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  Hash::Merge::Simple will recursively merge two or more hashes and return
  the result as a new hash reference. The merge function will descend and
  merge hashes that exist under the same node in both the left and right
  hash, but doesn't attempt to combine arrays, objects, scalars, or
  anything else. The rightmost hash also takes precedence, replacing
  whatever was in the left hash if a conflict occurs. This code was pretty
  much taken straight from Catalyst::Utils, and modified to handle more
  than 2 hashes at the same time.


pkgId: f02aa1759bc941acf1838a9961996ca964d25a4e20970ca251b33179d1c71379
name: perl-Hook-LexWrap
arch: noarch
version: 0.26
epoch: 0
release: 1.oe2503
summary: Lexically scoped subroutine wrappers
url: http://search.cpan.org/dist/Hook-LexWrap/
rpm_license: GPL+ or Artistic
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Development/Libraries
rpm_buildhost: OERV-9950x-02
rpm_sourcerpm: perl-Hook-LexWrap-0.26-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Hook-LexWrap-0.26-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  Hook::LexWrap allows you to install a pre- or post-wrapper (or both) around
  an existing subroutine. Unlike other modules that provide this capacity
  (e.g. Hook::PreAndPost and Hook::WrapSub), Hook::LexWrap implements
  wrappers in such a way that the standard caller function works correctly
  within the wrapped subroutine.


pkgId: 29efda24cb2853fdc53f4d25f054a7fff4ad014acc16c7ef9691b96bc1f3bf43
name: perl-IO-All
arch: noarch
version: 0.87
epoch: 0
release: 8.oe2503
summary: IO::All Perl module
url: https://metacpan.org/release/IO-All
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: f7308848a030
rpm_sourcerpm: perl-IO-All-0.87-8.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-IO-All-0.87-8.oe2503.noarch.rpm
checksum_type: sha256
description:
  IO::All combines all of the best Perl IO modules into a single Spiffy object
  oriented interface to greatly simplify your everyday Perl IO idioms. It exports
  a single function called "io", which returns a new IO::All object. And that
  object can do it all!

  The IO::All object is a proxy for IO::File, IO::Dir, IO::Socket, IO::String,
  Tie::File, File::Spec, File::Path and File::ReadBackwards; as well as all the
  DBM and MLDBM modules. You can use most of the methods found in these classes
  and in IO::Handle (which they inherit from). IO::All adds dozens of other
  helpful idiomatic methods including file stat and manipulation functions.

  IO::All is pluggable, and modules like IO::All::LWP and IO::All::Mailto add
  even more functionality. Optionally, every IO::All object can be tied to
  itself. This means that you can use most perl IO builtins on it: readline,
  getc, print, printf, syswrite, sysread, close.


pkgId: 16a364ef62929991359b937041920e471924724ae237e6b062fc7350ab4bd355
name: perl-IO-Compress
arch: noarch
version: 2.212
epoch: 0
release: 2.oe2503
summary: Read and write compressed data
url: https://metacpan.org/release/IO-Compress
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: eb9cd29e0f58
rpm_sourcerpm: perl-IO-Compress-2.212-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-IO-Compress-2.212-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This distribution provides a Perl interface to allow reading and writing of
  compressed data created with the zlib and bzip2 libraries.

  IO-Compress supports reading and writing of bzip2, RFC 1950, RFC 1951,
  RFC 1952 (i.e. gzip) and zip files/buffers.

  The following modules used to be distributed separately, but are now
  included with the IO-Compress distribution:
      Compress-Zlib
      IO-Compress-Zlib
      IO-Compress-Bzip2
      IO-Compress-Base


pkgId: b23393d0808637ee5eb14471ead9c2f9873b31ecf8d6a2852761b2c55df4d28d
name: perl-IO-HTML
arch: noarch
version: 1.004
epoch: 0
release: 2.oe2503
summary: Open an HTML file with automatic charset detection
url: https://metacpan.org/release/IO-HTML
rpm_license: GPL+ or Artistic
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-IO-HTML-1.004-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-IO-HTML-1.004-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module opens a file and performs automatic charset detection
  based on the HTML5 algorithm.  You can then pass the filehandle to
  HTML::Parser or a related module (or just read it yourself).


pkgId: 8dde35e79b864770a8b1b0e9313171c62acabcea25eefc4703b92af67d7473a8
name: perl-IO-Multiplex
arch: noarch
version: 1.16
epoch: 0
release: 13.oe2503
summary: Manage IO on many file handles
url: https://metacpan.org/release/IO-Multiplex
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-11
rpm_sourcerpm: perl-IO-Multiplex-1.16-13.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-IO-Multiplex-1.16-13.oe2503.noarch.rpm
checksum_type: sha256
description:
  IO::Multiplex is designed to take the effort out of managing
  multiple file handles. It is essentially a really fancy front end to
  the C<select> system call. In addition to maintaining the C<select>
  loop, it buffers all input and output to/from the file handles. It
  can also accept incoming connections on one or more listen sockets.


pkgId: dbac65f0ea40867887b9d0126fee4c69289893da76ddd6813f898feab986b27c
name: perl-IO-Pipely
arch: noarch
version: 0.006
epoch: 0
release: 1.oe2503
summary: Portably create pipe() or pipe-like handles, one way or another
url: http://search.cpan.org/dist/IO-Pipely/
rpm_license: GPL-1.0-only or Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Development/Libraries
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-IO-Pipely-0.006-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-IO-Pipely-0.006-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  IO::Pipely provides a couple functions to portably create one- and two-way pips and pipe-like socket pairs.


pkgId: e96eb487e5bcde1f8ff39a639793c52438e578b499e53d7d9087dc77eac3eea9
name: perl-IO-Socket-IP
arch: noarch
version: 0.43
epoch: 0
release: 2.oe2503
summary: Drop-in replacement for IO::Socket::INET supporting both IPv4 and IPv6
url: https://metacpan.org/release/IO-Socket-IP
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 871e1864c1b5
rpm_sourcerpm: perl-IO-Socket-IP-0.43-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-IO-Socket-IP-0.43-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module provides a protocol-independent way to use IPv4 and IPv6
  sockets, intended as a replacement for the IO::Socket::INET manpage. Most
  constructor arguments and methods are provided in a backward-compatible
  way.


pkgId: 9c35ba5b25b36daf204e3d853e5044b0169dd060e7fa7e1516b8df282eea86ee
name: perl-IO-Socket-SSL
arch: noarch
version: 2.089
epoch: 0
release: 2.oe2503
summary: Perl library for transparent SSL
url: https://metacpan.org/release/IO-Socket-SSL
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: f7534639ede4
rpm_sourcerpm: perl-IO-Socket-SSL-2.089-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-IO-Socket-SSL-2.089-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  IO::Socket::SSL is a class implementing an object oriented
  interface to SSL sockets. The class is a descendent of
  IO::Socket::INET.


pkgId: 86957b383447219e67c76fd82033af9d0b9a7ddc3fcf58279bcb3894c9a85a28
name: perl-IO-String
arch: noarch
version: 1.08
epoch: 0
release: 35.oe2503
summary: Emulate file interface for in-core strings
url: http://search.cpan.org/dist/IO-String/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-11
rpm_sourcerpm: perl-IO-String-1.08-35.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-IO-String-1.08-35.oe2503.noarch.rpm
checksum_type: sha256
description:
  The IO-String provides the IO::File interface for in-core strings.
  An IO::String object can be attached to a string, and makes it
  just like normal file for reading and writing.


pkgId: 21a8095565900ac0434045e5983c22fa35fa9ebbff49717d0c5628c1d6a9f93f
name: perl-IO-stringy
arch: noarch
version: 2.113
epoch: 0
release: 3.oe2503
summary: I/O on in-core objects for Perl
url: https://metacpan.org/pod/IO::stringy
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-10
rpm_sourcerpm: perl-IO-stringy-2.113-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-IO-stringy-2.113-3.oe2503.noarch.rpm
checksum_type: sha256
description:
  This package provides I/O on in-core objects for Perl,
  such as IO::Scalar, IO::ScalarArray, and IO::Lines.


pkgId: 75737c09eed4fab2e8b0415bb592d58ca02a6f3640e66c1deeb86c71ca38685a
name: perl-IPC-Cmd
arch: noarch
version: 1.04
epoch: 2
release: 5.oe2503
summary: Finding and running system commands made easy
url: https://metacpan.org/release/IPC-Cmd
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-10
rpm_sourcerpm: perl-IPC-Cmd-1.04-5.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-IPC-Cmd-1.04-5.oe2503.noarch.rpm
checksum_type: sha256
description:
  IPC::Cmd allows for the searching and execution of any binary on your system.
  It adheres to verbosity settings and is able to run intereactive.
  It also has an option to capture output/error buffers.


pkgId: 8fdcd1932b6a45906f1ff588cebab7c3488b1ce5c48367d9c5017ec4f19ea931
name: perl-IPC-Run
arch: noarch
version: 20231003.0
epoch: 0
release: 2.oe2503
summary: System() and background procs w/ piping, redirs, ptys (Unix, Win32)
url: https://search.cpan.org/dist/IPC-Run/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Development/Libraries
rpm_buildhost: 7e5c9b6ffe9e
rpm_sourcerpm: perl-IPC-Run-20231003.0-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-IPC-Run-20231003.0-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  IPC::Run allows you to run and interact with child processes using files,
  pipes, and pseudo-ttys. Both system()-style and scripted usages are
  supported and may be mixed. Likewise, functional and OO API styles are both
  supported and may be mixed.


pkgId: 4d3ee37fb29157fdf11ecd612ed1f0c7c18e782d6f7755ab0350580cfbe8a443
name: perl-IPC-Run3
arch: noarch
version: 0.049
epoch: 0
release: 2.oe2503
summary: Run a subprocess in batch mode
url: https://metacpan.org/release/IPC-Run3
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl or BSD
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-IPC-Run3-0.049-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-IPC-Run3-0.049-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module allows you to run a subprocess and redirect stdin, stdout,
  and/or stderr to files and perl data structures. It aims to satisfy 99% of
  the need for using system, qx, and open3 with a simple, extremely Perlish
  API and none of the bloat and rarely used features of IPC::Run.


pkgId: aa76354b67219532d09eb3593e41c4f575b094d19dff8c2ddc34c9a40e0d4194
name: perl-IPC-SysV
arch: riscv64
version: 2.09
epoch: 0
release: 3.oe2503
summary: Object class for SysV as well as the SysV IPC constants and system calls
url: https://metacpan.org/release/IPC-SysV
rpm_license: Artistic-1.0-Perl or GPL-1.0-or-later
rpm_group: Unspecified
rpm_buildhost: 49033df13202
rpm_sourcerpm: perl-IPC-SysV-2.09-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-IPC-SysV-2.09-3.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The SysV-IPC contains three packages

   IPC::Semaphore
   - Provides an object interface to using SysV IPC semaphores

   IPC::Msg
   - Provides an object interface to using SysV IPC messages

   IPC::SysV
   - Provides the constants required to use the system SysV IPC calls.

  Currently there is not object support for SysV shared memory, but
  SysV::SharedMem is a project for the future.


pkgId: 6b68730868e70314ccb27d4741f258fc5f751255e678d222a7044b48377214cb
name: perl-IPC-System-Simple
arch: noarch
version: 1.30
epoch: 0
release: 4.oe2503
summary: Run commands simply, with detailed diagnostics
url: https://search.cpan.org/dist/IPC-System-Simple
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: df5fe0f7e363
rpm_sourcerpm: perl-IPC-System-Simple-1.30-4.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-IPC-System-Simple-1.30-4.oe2503.noarch.rpm
checksum_type: sha256
description:
  Calling Perl's in-built system() function is easy, determining if it was successful is hard.
  Let's face it, $? isn't the nicest variable in the world to play with,
  and even if you do check it, producing a well-formatted error string takes a lot of work.


pkgId: 2e2f92f11fb1aac050f2ae70e41380002e17cc3906c677587abb72e290546021
name: perl-Image-ExifTool
arch: noarch
version: 13.18
epoch: 0
release: 1.oe2503
summary: Utility for reading and writing image meta info
url: https://exiftool.org/
rpm_license: GPL-1.0-or-later or Artistic-1.0
rpm_group: Unspecified
rpm_buildhost: 2006436a2856
rpm_sourcerpm: perl-Image-ExifTool-13.18-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Image-ExifTool-13.18-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  ExifTool is a Perl module with an included command-line application for
  reading and writing meta information in image, audio, and video files.
  It reads EXIF, GPS, IPTC, XMP, JFIF, MakerNotes, GeoTIFF, ICC Profile,
  Photoshop IRB, FlashPix, AFCP, and ID3 meta information from JPG, JP2,
  TIFF, GIF, PNG, MNG, JNG, MIFF, EPS, PS, AI, PDF, PSD, BMP, THM, CRW,
  CR2, MRW, NEF, PEF, ORF, DNG, and many other types of images. ExifTool
  also extracts information from the maker notes of many digital cameras
  by various manufacturers including Canon, Casio, FujiFilm, GE, HP,
  JVC/Victor, Kodak, Leaf, Minolta/Konica-Minolta, Nikon, Olympus/Epson,
  Panasonic/Leica, Pentax/Asahi, Reconyx, Ricoh, Samsung, Sanyo,
  Sigma/Foveon, and Sony.


pkgId: 17a86f3d7a4265959cb38ede3a805116a5146a7bd3db88d73bae0b79dd01065c
name: perl-Import-Into
arch: noarch
version: 1.002005
epoch: 0
release: 3.oe2503
summary: Import packages into other packages
url: https://metacpan.org/release/Import-Into
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-Import-Into-1.002005-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Import-Into-1.002005-3.oe2503.noarch.rpm
checksum_type: sha256
description:
  Writing exporters is a pain. Some use Exporter, some use Sub::Exporter,
  some use Moose::Exporter, some use Exporter::Declare ... and some things are pragmas.

  Exporting on someone else's behalf is harder. The exporters don't provide
  a consistent API for this, and pragmas need to have their import method
  called directly, since they effect the current unit of compilation.

  Import::Into provides global methods to make this painless.


pkgId: eb117c7b44cc7973b303235b3bf43a9138c2d4db11c1828d2956612b528420fd
name: perl-Importer
arch: noarch
version: 0.026
epoch: 0
release: 1.oe2503
summary: Alternative interface to modules that export symbols
url: https://metacpan.org/release/Importer
rpm_license: GPL+ or Artistic
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-Importer-0.026-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Importer-0.026-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  This Perl module acts as a layer between Exporter and modules which consume
  exports. It is feature-compatible with Exporter, plus some much needed
  extras. You can use this to import symbols from any exporter that follows
  Exporters specification. The exporter modules themselves do not need to use
  or inherit from the Exporter module, they just need to set @EXPORT and/or
  other variables.


pkgId: 8247a4ed7da732902f42ce52b2a11ee59d5f9be5a6680262ca99a55f413b11e0
name: perl-JSON
arch: noarch
version: 4.10
epoch: 0
release: 1.oe2503
summary: JSON (JavaScript Object Notation) encoder/decoder
url: https://metacpan.org/release/JSON
rpm_license: GPL+ or Artistic
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-02
rpm_sourcerpm: perl-JSON-4.10-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-JSON-4.10-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module is a thin wrapper for JSON::XS-compatible modules with
  a few additional features. All the backend modules convert a Perl
  data structure to a JSON text and vice versa. This module uses
  JSON::XS by default, and when JSON::XS is not available, falls back
  on JSON::PP, which is in the Perl core since 5.14. If JSON::PP is
  not available either, this module then falls back on JSON::backportPP
  (which is actually JSON::PP in a different .pm file) bundled in the
  same distribution as this module. You can also explicitly specify
  to use Cpanel::JSON::XS, a fork of JSON::XS by Reini Urban.


pkgId: d7afa1153f74ccd97d8b26ef390eee00a273c71ea895703210a2437aa9e676d2
name: perl-JSON-PP
arch: noarch
version: 4.16
epoch: 1
release: 2.oe2503
summary: JSON::XS compatible pure-Perl module.
url: https://metacpan.org/release/JSON-PP
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-JSON-PP-4.16-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-JSON-PP-4.16-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  JSON::PP is a pure perl JSON decoder/encoder, and (almost) compatible to much faster JSON::XS
  written by Marc Lehmann in C. JSON::PP works as a fallback module when you use JSON module without having installed JSON::XS.

  Because of this fallback feature of JSON.pm, JSON::PP tries not to be more JavaScript-friendly than JSON::XS
  (i.e. not to escape extra characters such as U+2028 and U+2029, etc), in order for you not to lose such JavaScript-friendliness
  silently when you use JSON.pm and install JSON::XS for speed or by accident. If you need JavaScript-friendly RFC7159-compliant
  pure perl module, try JSON::Tiny, which is derived from Mojolicious web framework and is also smaller and faster than JSON::PP.


pkgId: 35bab580ab2265eb4a0ad138fabf18b726d5477e166d3c69d4c42c7c15dc3286
name: perl-JSON-XS
arch: riscv64
version: 4.03
epoch: 1
release: 2.oe2503
summary: JSON serializing/de-serializing, done correctly and fast
url: https://metacpan.org/release/JSON-XS
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Development/Libraries
rpm_buildhost: eaf03e2bb14b
rpm_sourcerpm: perl-JSON-XS-4.03-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-JSON-XS-4.03-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This module converts Perl data structures to JSON and vice versa. Its
  primary goal is to be correct and its secondary goal is to be fast. To
  reach the latter goal it was written in C.


pkgId: 404dfa583d3f70dd319fe237f84f6f0af3e11162b2b56bc5898aa46a70e64d35
name: perl-LDAP
arch: noarch
version: 0.68
epoch: 0
release: 3.oe2503
summary: LDAP Perl module
url: https://metacpan.org/release/perl-ldap
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 1e8906b13fa7
rpm_sourcerpm: perl-LDAP-0.68-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-LDAP-0.68-3.oe2503.noarch.rpm
checksum_type: sha256
description:
  Net::LDAP is a collection of modules that implements an LDAP services API
  for Perl programs. The module may be used to search directories or perform
  maintenance functions such as adding, deleting or modifying entries.


pkgId: 9943723e0d248b6a936551ecd91ff2554ddf31a0094833631d68504647b0d136
name: perl-LWP-MediaTypes
arch: noarch
version: 6.04
epoch: 0
release: 4.oe2503
summary: Guess media type for a file or a URL
url: https://metacpan.org/release/LWP-MediaTypes
rpm_license: (GPL+ or Artistic) and Public Domain
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-LWP-MediaTypes-6.04-4.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-LWP-MediaTypes-6.04-4.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module provides functions for handling media (also known as MIME)
  types and encodings. The mapping from file extensions to media types is
  defined by the media.types file. If the ~/.media.types file exists it is
  used instead. For backwards compatibility we will also look for
  ~/.mime.types.


pkgId: 0eed80446d4c0075c4069b977d3bd1feccc10d8fcbba95d2eda11f45f0994514
name: perl-LWP-Protocol-https
arch: noarch
version: 6.14
epoch: 0
release: 1.oe2503
summary: Provides support for using https schemed URLs with LWP
url: https://metacpan.org/pod/LWP::Protocol::https
rpm_license: GPL-1.0-or-later or Artistic-1.0 or Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-LWP-Protocol-https-6.14-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-LWP-Protocol-https-6.14-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  The LWP::Protocol::https module provides support for using https schemed URLs with LWP.\
  This module is a plug-in to the LWP protocol handling, so you don't use it directly.\
  Once the module is installed LWP is able to access sites using HTTP over SSL/TLS.\


pkgId: a2caed86a410ddf9f539ea161c7406be2a1813be5297397f50baa41b466b3da2
name: perl-LaTeX-ToUnicode
arch: noarch
version: 0.55
epoch: 0
release: 2.oe2503
summary: Convert LaTeX commands to Unicode
url: https://metacpan.org/release/LaTeX-ToUnicode
rpm_license: Artistic-1.0 or GPL-1.0-or-later
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Development/Libraries
rpm_buildhost: OERV-9950x-02
rpm_sourcerpm: perl-LaTeX-ToUnicode-0.55-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-LaTeX-ToUnicode-0.55-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module provides a method to convert LaTeX-style markups for accents
  etc. into their Unicode equivalents. It translates commands for special
  characters or accents into their Unicode equivalents and removes
  formatting commands.


pkgId: abf612f1ee84723d4c434ac278bf6a90ad2aa51c65da5c723b429df059918c6a
name: perl-Lingua-Translit
arch: noarch
version: 0.29
epoch: 0
release: 1.oe2503
summary: Transliterates text between writing systems
url: http://search.cpan.org/dist/Lingua-Translit/
rpm_license: GPL-1.0-only or Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Development/Libraries
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-Lingua-Translit-0.29-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Lingua-Translit-0.29-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  Lingua::Translit can be used to convert text from one writing system to
  another, based on national or international transliteration tables. Where
  possible a reverse transliteration is supported.


pkgId: 89c46ffef66c65e355bc71facdcffedf038eeb309e8e91db064f43fcdf33451d
name: perl-List-AllUtils
arch: noarch
version: 0.19
epoch: 0
release: 2.oe2503
summary: Combines List::Util and List::SomeUtils
url: https://metacpan.org/release/List-AllUtils
rpm_license: Artistic-2.0
rpm_group: Unspecified
rpm_buildhost: 7cc47fa4a5f3
rpm_sourcerpm: perl-List-AllUtils-0.19-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-List-AllUtils-0.19-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  Are you sick of trying to remember whether a particular helper is defined
  in List::Util or List::SomeUtils? I sure am. Now you don't have to remember.
  This module will export all of the functions that either of those two
  modules defines.


pkgId: 383a9a68a28450af22d65a2a926967bf17bccbbe0c23bc6244f0fb132e870581
name: perl-List-AllUtils-help
arch: noarch
version: 0.19
epoch: 0
release: 2.oe2503
summary: Combines List::Util, List::SomeUtils and List::UtilsBy in one bite-sized package
url: https://metacpan.org/release/List-AllUtils
rpm_license: Artistic-2.0
rpm_group: Unspecified
rpm_buildhost: 7cc47fa4a5f3
rpm_sourcerpm: perl-List-AllUtils-0.19-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-List-AllUtils-help-0.19-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  Are you sick of trying to remember whether a particular helper is defined
  in List::Util, List::SomeUtils or List::UtilsBy? I sure am. Now you don't
  have to remember. This module will export all of the functions that either
  of those three modules defines.


pkgId: 3c27fd535110e4b846ef6eb6d942234e07dbf5437689068a779e02a3fbbc571b
name: perl-List-MoreUtils
arch: noarch
version: 0.430
epoch: 0
release: 3.oe2503
summary: Provide the stuff missing in List::Util
url: https://metacpan.org/release/List-MoreUtils
rpm_license: (GPL-1.0-or-later OR Artistic-1.0-Perl) and Apache-2.0
rpm_group: Unspecified
rpm_buildhost: c0e4c37ad30d
rpm_sourcerpm: perl-List-MoreUtils-0.430-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-List-MoreUtils-0.430-3.oe2503.noarch.rpm
checksum_type: sha256
description:
  List::MoreUtils provides some trivial but commonly needed functionality on lists which is not going to go into List::Util.
  All of the below functions are implementable in only a couple of lines of Perl code.
  Using the functions from this module however should give slightly better performance as everything is implemented in C.
  The pure-Perl implementation of these functions only serves as a fallback in case the C portions of this module couldn't be compiled on this machine.


pkgId: 9324d1f0be6452247456db49d368c2f933847171e8d0740ad33f240969ebc24b
name: perl-List-MoreUtils-XS
arch: riscv64
version: 0.430
epoch: 0
release: 3.oe2503
summary: Provide compiled List::MoreUtils functions
url: https://metacpan.org/release/List-MoreUtils-XS
rpm_license: (GPL-1.0-or-later OR Artistic-1.0-Perl) and Apache-2.0
rpm_group: Unspecified
rpm_buildhost: 25d637ccae57
rpm_sourcerpm: perl-List-MoreUtils-XS-0.430-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-List-MoreUtils-XS-0.430-3.oe2503.riscv64.rpm
checksum_type: sha256
description:
  List::MoreUtils::XS is a backend for List::MoreUtils. Even if it's possible (because of user wishes)
  to have it practically independent from List::MoreUtils, it technically depend on List::MoreUtils.
  Since it's only a backend, the API is not public and can change without any warning.


pkgId: b3ab08344d81b9661d2fb7a336e73e21d725310d4d1658e905e724f3b1f8d3cd
name: perl-List-SomeUtils
arch: noarch
version: 0.59
epoch: 0
release: 2.oe2503
summary: Provide the stuff missing in List::Util
url: https://metacpan.org/release/List-SomeUtils
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 6735075af7df
rpm_sourcerpm: perl-List-SomeUtils-0.59-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-List-SomeUtils-0.59-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  List::SomeUtils provides some trivial but commonly needed functionality on
  lists which is not going to go into List::Util.


pkgId: 0af072a341301f7db8ca5e064fe66b1fe3de9720214e0005ebac591486400954
name: perl-List-UtilsBy
arch: noarch
version: 0.12
epoch: 0
release: 2.oe2503
summary: Higher-order list utility functions
url: https://metacpan.org/release/List-UtilsBy/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-List-UtilsBy-0.12-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-List-UtilsBy-0.12-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module provides a number of list utility functions, all of which take
  an initial code block to control their behaviour. They are variations on
  similar core perl or List::Util functions of similar names, but which use
  the block to control their behaviour. For example, the core Perl function
  sort takes a list of values and returns them, sorted into order by their
  string value. The "sort_by" function sorts them according to the string
  value returned by the extra function, when given each value.


pkgId: 4b2ea878f2b370b83c609311ed45ae92fb1c90102c3cf690fed2644d609119cc
name: perl-Locale-Codes
arch: noarch
version: 3.81
epoch: 0
release: 2.oe2503
summary: A distribution of modules to handle locale codes
url: https://metacpan.org/release/Locale-Codes
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: da0d3fad358c
rpm_sourcerpm: perl-Locale-Codes-3.81-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Locale-Codes-3.81-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  Locale-Codes is a distribution containing a set of modules designed to
  work with sets of codes which uniquely identify something.


pkgId: 503e0acdc0a12d91509fb723e108185e493d7c5b914a3d27504873ecbf336647
name: perl-Locale-Maketext
arch: noarch
version: 1.33
epoch: 1
release: 2.oe2503
summary: Framework for localization
url: https://metacpan.org/release/Locale-Maketext
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-11
rpm_sourcerpm: perl-Locale-Maketext-1.33-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Locale-Maketext-1.33-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  Locale::Maketext is a framework for software localization; it provides you with the tools
  for organizing and accessing the bits of text and text-processing code that you need for
  producing localized applications.


pkgId: 174ada7eccd2bd6bfa63efba430fef11147970a000afaf95c0ccce096f254321
name: perl-Locale-gettext
arch: riscv64
version: 1.07
epoch: 0
release: 15.oe2503
summary: message handling functions
url: https://metacpan.org/release/gettext
rpm_license: GPL+ or Artistic
rpm_group: Unspecified
rpm_buildhost: 31e685c1e761
rpm_sourcerpm: perl-gettext-1.07-15.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Locale-gettext-1.07-15.oe2503.riscv64.rpm
checksum_type: sha256
description:
  The gettext module permits access from perl to the gettext() family of functions
  for retrieving message strings from databases constructed to internationalize
  software.


pkgId: 169849a85c56188a2ee727b1283db33febd203f7e1aca02fe0af931fd65633f5
name: perl-Log-Dispatch
arch: noarch
version: 2.71
epoch: 0
release: 2.oe2503
summary: Dispatches messages to one or more outputs
url: https://metacpan.org/release/Log-Dispatch
rpm_license: Artistic-2.0
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-Log-Dispatch-2.71-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Log-Dispatch-2.71-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  Log::Dispatch is a suite of OO modules for logging messages to
  multiple outputs, each of which can have a minimum and maximum log
  level.  It is designed to be easily subclassed, both for creating a
  new dispatcher object and particularly for creating new outputs.
  An Apache output is available in perl-Log-Dispatch-ApacheLog package.


pkgId: 21b1e1bb3ff713ae118be5bd55fc07bb593b8ad9c5a445e48288a4469cdb87aa
name: perl-Log-Dispatch-FileRotate
arch: noarch
version: 1.38
epoch: 0
release: 2.oe2503
summary: Log to files that archive/rotate themselves
url: https://metacpan.org/release/Log-Dispatch-FileRotate
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: fefab110babf
rpm_sourcerpm: perl-Log-Dispatch-FileRotate-1.38-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Log-Dispatch-FileRotate-1.38-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module provides a simple object for logging to files under the
  Log::Dispatch::* system, and automatically rotating them according to
  different constraints. This is basically a Log::Dispatch::File wrapper
  with additions.


pkgId: b744d4fe7bd46bc00769f934d962fbf6c6e9ebbb4840e098ac101f9a6912bf20
name: perl-Log-Dispatch-help
arch: noarch
version: 2.71
epoch: 0
release: 2.oe2503
summary: Dispatches messages to one or more outputs
url: https://metacpan.org/release/Log-Dispatch
rpm_license: Artistic-2.0
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-Log-Dispatch-2.71-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Log-Dispatch-help-2.71-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module manages a set of Log::Dispatch::* output objects that can be
  logged to via a unified interface.


pkgId: b8336f8f37e03d3813876c3d2f970c0a56ae3bd45f57fbe26d8f239feafb886b
name: perl-Log-Log4perl
arch: noarch
version: 1.57
epoch: 0
release: 2.oe2503
summary: Log4j implementation for Perl
url: https://metacpan.org/release/Log-Log4perl
rpm_license: GPL-1.0-or-later or Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-10
rpm_sourcerpm: perl-Log-Log4perl-1.57-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Log-Log4perl-1.57-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  Log::Log4perl lets you remote-control and fine-tune the logging
  behavior of your system from the outside. It implements the widely
  popular (Java-based) Log4j logging package in pure Perl.

  To log into RRD database, install perl-Log-Log4perl-Appender-RRDs package.
  To log into a database via DBI, install perl-Log-Log4perl-Appender-DBI package.

  To read log4j XML configuration files, install
  perl-Log-Log4perl-Config-DOMConfigurator package.


pkgId: cf98937e9f97099a5dfbbd8d89e17841707e1273c24f17767dc950ff6e23af75
name: perl-Log-Log4perl-help
arch: noarch
version: 1.57
epoch: 0
release: 2.oe2503
summary: Log4j implementation for Perl
url: https://metacpan.org/release/Log-Log4perl
rpm_license: GPL-1.0-or-later or Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-10
rpm_sourcerpm: perl-Log-Log4perl-1.57-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Log-Log4perl-help-1.57-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  Log::Log4perl lets you remote-control and fine-tune the logging behaviour
  of your system from the outside. It implements the widely popular (Java-
  based) Log4j logging package in pure Perl.


pkgId: 1029f7d647983b8b87885e55bec837361d8e2d2a3e5cd268a75f9914e74a42f7
name: perl-MIME-Base64
arch: riscv64
version: 3.16
epoch: 0
release: 3.oe2503
summary: Encoding and decoding of base64 strings
url: https://metacpan.org/release/MIME-Base64
rpm_license: (GPL-1.0-or-later OR Artistic-1.0-Perl) and MIT
rpm_group: Unspecified
rpm_buildhost: 3e0f9c1d7e7f
rpm_sourcerpm: perl-MIME-Base64-3.16-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-MIME-Base64-3.16-3.oe2503.riscv64.rpm
checksum_type: sha256
description:
  This module provides functions to encode and decode strings into and from the base64 encoding
  specified in RFC 2045 - MIME (Multipurpose Internet Mail Extensions). The base64 encoding is
  designed to represent arbitrary sequences of octets in a form that need not be humanly readable.
  A 65-character subset ([A-Za-z0-9+/=]) of US-ASCII is used, enabling 6 bits to be represented per printable character.


pkgId: c08686dc24b42a5441897c6f7b540bb5ae6e63d7ac32439f2e52d805dffeb1b7
name: perl-MIME-Lite
arch: noarch
version: 3.033
epoch: 0
release: 2.oe2503
summary: MIME::Lite - low-calorie MIME generator
url: https://metacpan.org/release/MIME-Lite
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-11
rpm_sourcerpm: perl-MIME-Lite-3.033-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-MIME-Lite-3.033-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  MIME::Lite is a simple, standalone module which can generate (not parse) MIME messages.
  Specifically, you can use it to output a simple, decent single- or multi-part message which
  may have text or binary attachments. And you do not have to install Mail:: or MIME:: modules.


pkgId: 356cfc25083b5211f00f1f7ef4e1fee0074509a8cc377f02cdc4192244c32cb6
name: perl-MIME-Types
arch: noarch
version: 2.26
epoch: 0
release: 2.oe2503
summary: MIME-types module in Perl
url: https://metacpan.org/release/MIME-Types
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 07fcf4bc1385
rpm_sourcerpm: perl-MIME-Types-2.26-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-MIME-Types-2.26-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This package provides MIME types which are used in many applications.For instance as
  part of e-mail and HTTP traffic, to indicate the type of content that is transmitted.

  This object administers a huge list of known mime-types, combined from various sources.
  For instance, it contains all IANA types and the knowledge of Apache. Probably the most
  complete table on the net!


pkgId: 4ecbd268fa929f2a669c32914e9c5be9622f083b90986fe18c9fe7663e4d4c3d
name: perl-MLDBM
arch: noarch
version: 2.05
epoch: 0
release: 2.oe2503
summary: Store multi-level hash structure in single level tied hash
url: https://metacpan.org/release/MLDBM
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 3543b621ceec
rpm_sourcerpm: perl-MLDBM-2.05-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-MLDBM-2.05-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module can serve as a transparent interface to any TIEHASH package that is
  required to store arbitrary perl data, including nested references. Thus, this
  module can be used for storing references and other arbitrary data within DBM
  databases.


pkgId: e1f37a7f5c53b89887d243dd490b21bd7a618934fb1ba626b9d65405300ac2b8
name: perl-MRO-Compat
arch: noarch
version: 0.15
epoch: 0
release: 1.oe2503
summary: mro::* interface compatibility for Perls < 5.9.5
url: https://metacpan.org/release/MRO-Compat
rpm_license: GPL+ or Artistic
rpm_group: Unspecified
rpm_buildhost: 39fa651890a2
rpm_sourcerpm: perl-MRO-Compat-0.15-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-MRO-Compat-0.15-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  The "mro" namespace provides several utilities for dealing with method
  resolution order and method caching in general in Perl 5.9.5 and higher.

  This module provides those interfaces for earlier versions of Perl (back
  to 5.6.0 anyways).

  It is a harmless no-op to use this module on 5.9.5+. That is to say,
  code which properly uses MRO::Compat will work unmodified on both older
  Perls and 5.9.5+.

  If you're writing a piece of software that would like to use the parts
  of 5.9.5+'s mro:: interfaces that are supported here, and you want
  compatibility with older Perls, this is the module for you.


pkgId: 4cc896fd4d69662d757524fdffbe86300c20aa7b91493bb37dee2409a2d326a5
name: perl-Mail-DKIM
arch: noarch
version: 1.20230212
epoch: 0
release: 1.oe2503
summary: Implements the new Domain Keys Identified Mail (DKIM) standard, and the older Yahoo!
url: http://dkimproxy.sourceforge.net/
rpm_license: GPL-1.0-or-later or Artistic-1.0
rpm_group: Unspecified
rpm_buildhost: cbaadd705a62
rpm_sourcerpm: perl-Mail-DKIM-1.20230212-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Mail-DKIM-1.20230212-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  Mail-DKIM is a Perl module that implements the new Domain Keys Identified Mail (DKIM) standard,
  and the older Yahoo! DomainKeys standard, both of which sign and verify emails
  using digital signatures and DNS records. Mail-DKIM can be used by
  any Perl program that wants to provide support for DKIM and/or DomainKeys.


pkgId: 1d17baf014ee15b0ee22f3ce83bd159fa048d0344dd7d55a027789c74d6b5cfd
name: perl-Mail-IMAPTalk
arch: noarch
version: 4.06
epoch: 0
release: 2.oe2503
summary: IMAP client interface with lots of features
url: https://search.cpan.org/dist/Mail-IMAPTalk/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-10
rpm_sourcerpm: perl-Mail-IMAPTalk-4.06-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Mail-IMAPTalk-4.06-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module communicates with an IMAP server. Each IMAP server command is
  mapped to a method of this object.


pkgId: 4a2ed8d5c48ba452834e63de788c66bfa39eb1f548f7cccfbedf9e60067937ad
name: perl-Mail-Sender
arch: noarch
version: 0.903
epoch: 1
release: 11.oe2503
summary: Module for sending mails with attachments through an SMTP server
url: https://metacpan.org/release/Mail-Sender
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 0d52d3654dab
rpm_sourcerpm: perl-Mail-Sender-0.903-11.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Mail-Sender-0.903-11.oe2503.noarch.rpm
checksum_type: sha256
description:
  Mail::Sender provides an object-oriented interface to sending mails. It directly connects to the mail
  server using IO::Socket.


pkgId: 7e8d5d8cbeca26204e779b931bd66730df8b35cdfc4245b3082af0e3a898950a
name: perl-Mail-Sendmail
arch: noarch
version: 0.80
epoch: 0
release: 3.oe2503
summary: Simple platform independent mailer
url: https://search.cpan.org/dist/Mail-Sendmail/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Development/Libraries
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-Mail-Sendmail-0.80-3.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Mail-Sendmail-0.80-3.oe2503.noarch.rpm
checksum_type: sha256
description:
  Simple platform independent e-mail from your perl script. Only requires
  Perl 5 and a network connection.


pkgId: 26ea52faa16df14c0ca6f89e54b4fcd6c2a0e8ddd37a16ae48759e90705837ef
name: perl-Math-Base-Convert
arch: noarch
version: 0.11
epoch: 0
release: 2.oe2503
summary: Very fast base to base conversion
url: https://metacpan.org/release/Math-Base-Convert
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-02
rpm_sourcerpm: perl-Math-Base-Convert-0.11-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Math-Base-Convert-0.11-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module provides fast functions and methods to convert between
  arbitrary number bases from 2 (binary) thru 65535.


pkgId: d59232b760b62f8a426c8f8f18d98879ec4b5ad3a79e14a19aaeed63e903c249
name: perl-Math-BigInt
arch: noarch
version: 2.0030.03
epoch: 1
release: 2.oe2503
summary: Arbitrary size integer/float math package
url: https://metacpan.org/release/Math-BigInt
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-Math-BigInt-2.0030.03-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Math-BigInt-2.0030.03-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  Math::BigInt provides support for arbitrary precision integers. Overloading is also
  provided for Perl operators.


pkgId: 109dadf8c18daef14c36690bc1b44da94fc4fc147aadfad0cc0db657330fdec0
name: perl-Math-BigInt-FastCalc
arch: riscv64
version: 0.5018
epoch: 0
release: 2.oe2503
summary: Math::BigInt::Calc with some XS for more speed
url: https://metacpan.org/release/Math-BigInt-FastCalc
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: c5c65adfcd01
rpm_sourcerpm: perl-Math-BigInt-FastCalc-0.5018-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Math-BigInt-FastCalc-0.5018-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Math::BigInt::FastCalc inherits from Math::BigInt::Calc.
  Provides support for big integer calculations. Not intended to be used by other modules.
  Other modules which sport the same functions can also be used to support Math::BigInt,
  like Math::BigInt::GMP or Math::BigInt::Pari.


pkgId: 44a1459e333d9517a71da8c89e29f6e14556431d635f27b66b30530ac570c3a8
name: perl-Math-BigInt-FastCalc-tests
arch: riscv64
version: 0.5018
epoch: 0
release: 2.oe2503
summary: Tests for perl-Math-BigInt-FastCalc
url: https://metacpan.org/release/Math-BigInt-FastCalc
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: c5c65adfcd01
rpm_sourcerpm: perl-Math-BigInt-FastCalc-0.5018-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Math-BigInt-FastCalc-tests-0.5018-2.oe2503.riscv64.rpm
checksum_type: sha256
description:
  Tests from perl-Math-BigInt-FastCalc. Execute them with "/usr/libexec/perl-Math-BigInt-FastCalc/test".


pkgId: ae26869b085fdd67e77decb1a59e4380e3861fc36dcd14f94dacb32570898b71
name: perl-Menlo
arch: noarch
version: 1.9019
epoch: 0
release: 1.oe2503
summary: A CPAN client
url: https://metacpan.org/release/Menlo
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: ee8fc79a81eb
rpm_sourcerpm: perl-Menlo-1.9019-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Menlo-1.9019-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  Menlo is a code name for cpanm 2.0, developed with the goal to
  replace cpanm and its back-end with a more flexible, extensible and
  easier to use APIs.


pkgId: 5ea86bb4e99fc042554d8b614b6acb75f8d1a25f8b9150d8bad1f84ad254503a
name: perl-Menlo-Legacy
arch: noarch
version: 1.9022
epoch: 0
release: 1.oe2503
summary: Legacy internal and client support for Menlo
url: https://metacpan.org/release/Menlo-Legacy
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: stl-iscas-9950x
rpm_sourcerpm: perl-Menlo-Legacy-1.9022-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Menlo-Legacy-1.9022-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  Menlo::Legacy is a package to install Menlo::CLI::Compat which is a
  compatibility library that implements the classic version of cpanminus
  internals and behavios. This is so that existing users of cpanm and API
  clients such as Carton, Carmel and App::cpm) can rely on the stable
  features and specific behaviors of cpanm.


pkgId: 9c9eaa8827f1205e29701c9ebb8e6575c3ac2481941055cd9ae279057265ed55
name: perl-Module-Build
arch: noarch
version: 0.42.34
epoch: 2
release: 1.oe2503
summary: Build and install Perl modules
url: https://metacpan.org/release/Module-Build
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 75abe9acbeb8
rpm_sourcerpm: perl-Module-Build-0.42.34-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Module-Build-0.42.34-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  Module::Build is a system for building, testing, and installing Perl modules.
  It is meant to be an alternative to ExtUtils::MakeMaker. Developers may alter
  the behavior of the module through subclassing. It also does not require a make
  on your system - most of the Module::Build code is pure-perl and written in a
  very cross-platform way.


pkgId: c46029021abbdfab32b4e751f9c8c341ddcd81001e40a5c57308eaa8bff7a0f5
name: perl-Module-CPANfile
arch: noarch
version: 1.1004
epoch: 0
release: 2.oe2503
summary: Parse cpanfile
url: https://metacpan.org/release/Module-CPANfile
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-Module-CPANfile-1.1004-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Module-CPANfile-1.1004-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  Module::CPANfile is a tool to handle cpanfile format to load application
  specific dependencies, not just for CPAN distributions.


pkgId: 914435f2976bea2cb4e72a532f89eed1507c6b339c96a35cab1615b0fb2fc4d4
name: perl-Module-CoreList
arch: noarch
version: 5.20241020
epoch: 1
release: 2.oe2503
summary: what modules shipped with versions of perl
url: https://metacpan.org/release/Module-CoreList
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 1f04f7530bf5
rpm_sourcerpm: perl-Module-CoreList-5.20241020-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Module-CoreList-5.20241020-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  Module::CoreList provides information on which core and dual-life modules shipped with each
  version of perl. It provides a number of mechanisms for querying this information. There is
  a utility called corelist provided with this module which is a convenient way of querying
  from the command-line. There is a functional programming API available for programmers to
  query information. Programmers may also query the contained hash structures to find relevant
  information.


pkgId: 23d9476d12272f8039b0df48791f50ae18b09ee1989f81826a6617d990a20c4b
name: perl-Module-Implementation
arch: noarch
version: 0.09
epoch: 0
release: 2.oe2503
summary: Loads one of several alternate underlying implementations for a module
url: https://search.cpan.org/dist/Module-Implementation/
rpm_license: Artistic 2.0
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Development/Libraries
rpm_buildhost: OERV-9950x-11
rpm_sourcerpm: perl-Module-Implementation-0.09-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Module-Implementation-0.09-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module abstracts out the process of choosing one of several underlying
  implementations for a module. This can be used to provide XS and pure Perl
  implementations of a module, or it could be used to load an implementation
  for a given OS or any other case of needing to provide multiple
  implementations.


pkgId: 520d4a9164b69ac913680c9d8013a09ef6344157b41c8c8d8163d7ffdbac8d3d
name: perl-Module-Install
arch: noarch
version: 1.21
epoch: 0
release: 2.oe2503
summary: Standalone, extensible Perl module installer
url: https://metacpan.org/release/Module-Install
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 7bf5d6fd6aa0
rpm_sourcerpm: perl-Module-Install-1.21-2.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Module-Install-1.21-2.oe2503.noarch.rpm
checksum_type: sha256
description:
  Module::Install is a package for writing installers for CPAN (or CPAN-like) distributions
  that are clean, simple, minimalist, act in a strictly correct manner with ExtUtils::MakeMaker,
  and will run on any Perl installation version 5.005 or newer.

  The intent is to make it as easy as possible for CPAN authors (and especially for first-time
  CPAN authors) to have installers that follow all the best practices for distribution
  installation, but involve as much DWIM (Do What I Mean) as possible when writing them.


pkgId: 065e9507a4e4da3e0807888e0a9d6ef6670f3ff8739e665b3f0e0d1e4edd8db0
name: perl-Module-Install-AuthorRequires
arch: noarch
version: 0.02
epoch: 0
release: 19.oe2503
summary: Declarition of author-only dependencies
url: https://metacpan.org/release/Module-Install-AuthorRequires
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-9950x-11
rpm_sourcerpm: perl-Module-Install-AuthorRequires-0.02-19.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Module-Install-AuthorRequires-0.02-19.oe2503.noarch.rpm
checksum_type: sha256
description:
  "author_requires" command provided by this package allows to specify such
  developer specific dependencies in a proper way.


pkgId: 54cfc7040e135096f7b791fd0b5a0c2d300a9a8063a5ae8225631cf471b68649
name: perl-Module-Install-AuthorTests
arch: noarch
version: 0.002
epoch: 0
release: 19.oe2503
summary: Assign tests only run by module authors
url: https://metacpan.org/release/Module-Install-AuthorTests
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-Module-Install-AuthorTests-0.002-19.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Module-Install-AuthorTests-0.002-19.oe2503.noarch.rpm
checksum_type: sha256
description:
  This package is used to assign tests in ./xt directory should be run
  only if the module is being built by an author.


pkgId: 16b23949b583178e11b3f33e70592ad8f2113925072d94f5b5d2e3bc6b0de977
name: perl-Module-Install-AutoLicense
arch: noarch
version: 0.10
epoch: 0
release: 8.oe2503
summary: A Module::Install extension to automatically generate LICENSE files
url: https://metacpan.org/release/Module-Install-AutoLicense
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 5f91874b77a6
rpm_sourcerpm: perl-Module-Install-AutoLicense-0.10-8.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Module-Install-AutoLicense-0.10-8.oe2503.noarch.rpm
checksum_type: sha256
description:
  Module::Install::AutoLicense is a Module::Install extension that generates
  a "LICENSE" file automatically whenever the author runs "Makefile.PL". On
  the user side it does nothing.


pkgId: 74ca5e16568db28c4f04e0b3969c42eefbb56ebd8e92749b2dcf78d5270e5405
name: perl-Module-Install-ExtraTests
arch: noarch
version: 0.008
epoch: 0
release: 1.oe2503
summary: Ignorable, contextual test support for Module::Install
url: https://metacpan.org/release/Module-Install-ExtraTests
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_group: Unspecified
rpm_buildhost: 2343f5be64d6
rpm_sourcerpm: perl-Module-Install-ExtraTests-0.008-1.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Module-Install-ExtraTests-0.008-1.oe2503.noarch.rpm
checksum_type: sha256
description:
  This allows extra_tests; to be declared in Makefile.PL, indicating that the
  test files found in the directory ./xt should be run only in certain
  instances:

    ./xt/author  - run when the tests are being run in an author's working copy
    ./xt/smoke   - run when the dist is being smoked (AUTOMATED_TESTING=1)
    ./xt/release - run during "make disttest"


pkgId: 5d7aa89cc7547952139ee24af042d47aa368fcf02cd54dc4f95d1d8d279c388c
name: perl-Module-Install-GithubMeta
arch: noarch
version: 0.30
epoch: 0
release: 13.oe2503
summary: A Module::Install extension to include GitHub meta information in META.yml
url: https://metacpan.org/release/Module-Install-GithubMeta
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-Module-Install-GithubMeta-0.30-13.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Module-Install-GithubMeta-0.30-13.oe2503.noarch.rpm
checksum_type: sha256
description:
  Module::Install::GithubMeta is a Module::Install extension to include
  GitHub <https://github.com> meta information in "META.yml".

  It automatically detects if the distribution directory is under "git"
  version control and whether the "origin" is a GitHub repository and will
  set the "repository" and "homepage" meta in "META.yml" to the
  appropriate URLs for GitHub.


pkgId: 38ae439ae43895f4771cd615562198d55efd693fe0b247d9565caccfbabbde35
name: perl-Module-Install-ManifestSkip
arch: noarch
version: 0.24
epoch: 0
release: 14.oe2503
summary: Generate a MANIFEST.SKIP file
url: https://metacpan.org/release/Module-Install-ManifestSkip
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: obs://oerv-obs-backend/openEuler:25.03
rpm_group: Unspecified
rpm_buildhost: OERV-OBS
rpm_sourcerpm: perl-Module-Install-ManifestSkip-0.24-14.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Module-Install-ManifestSkip-0.24-14.oe2503.noarch.rpm
checksum_type: sha256
description:
  This module generates a MANIFEST.SKIP file for you (using
  Module::Manifest::Skip) that contains the common files that people do not
  want in their MANIFEST files. The SKIP file is generated each time that you
  (the module author) run Makefile.PL.


pkgId: aec5c85326ea0acd2ec02c6f5a0069cb3d4e5a24a4f6e36c341b923dc72d1f1b
name: perl-Module-Install-ReadmeFromPod
arch: noarch
version: 0.30
epoch: 0
release: 12.oe2503
summary: A Module::Install extension to automatically convert POD to a README
url: https://metacpan.org/release/Module-Install-ReadmeFromPod
rpm_license: GPL+ or Artistic
rpm_group: Unspecified
rpm_buildhost: 3709406d7d11
rpm_sourcerpm: perl-Module-Install-ReadmeFromPod-0.30-12.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Module-Install-ReadmeFromPod-0.30-12.oe2503.noarch.rpm
checksum_type: sha256
description:
  Module::Install::ReadmeFromPod is a Module::Install extension that generates a "README" file automatically
  from an indicated file containing POD, whenever the author runs "Makefile.PL". Several output formats are
  supported: plain-text, HTML, PDF or manpage.


pkgId: f7d70de1e43428a64f5b87bbb2ed63b4149af34212bd2239297957795e4009a2
name: perl-Module-Install-ReadmeMarkdownFromPod
arch: noarch
version: 0.04
epoch: 0
release: 10.oe2503
summary: Create README.mkdn from POD
url: https://metacpan.org/release/Module-Install-ReadmeMarkdownFromPod
rpm_license: GPL+ or Artistic
rpm_group: Unspecified
rpm_buildhost: 3bc252d088cd
rpm_sourcerpm: perl-Module-Install-ReadmeMarkdownFromPod-0.04-10.oe2503.src.rpm
rpm_packager: http://openeuler.org
location_href: Packages/perl-Module-Install-ReadmeMarkdownFromPod-0.04-10.oe2503.noarch.rpm
checksum_type: sha256
description:
  Module::Install::ReadmeMarkdownFromPod is a Module::Install extension that generates a "README.mkdn"
  file automatically from an indicated file containing POD whenever the author runs "Makefile.PL". This
  file is used by GitHub to display nicely formatted information about a repository.


