parallel - build and execute shell command lines from standard input in parallel
parallel [options] [command [arguments]] < list_of_arguments
parallel [options] [command [arguments]] ( ::: arguments | :::+ arguments | :::: argfile(s) | ::::+ argfile(s) ) ...
parallel --semaphore [options] command
#!/usr/bin/parallel --shebang [options] [command [arguments]]
GNU parallel is a shell tool for executing jobs in parallel using one or more computers. A job can be a single command or a small script that has to be run for each of the lines in the input. The typical input is a list of files, a list of hosts, a list of users, a list of URLs, or a list of tables. A job can also be a command that reads from a pipe. GNU parallel can then split the input into blocks and pipe a block into each command in parallel.
If you use xargs and tee today you will find GNU parallel very easy to use as GNU parallel is written to have the same options as xargs. If you write loops in shell, you will find GNU parallel may be able to replace most of the loops and make them run faster by running several jobs in parallel.
GNU parallel makes sure output from the commands is the same output as you would get had you run the commands sequentially. This makes it possible to use output from GNU parallel as input for other programs.
For each line of input GNU parallel will execute command with the line as arguments. If no command is given, the line of input is executed. Several lines will be run in parallel. GNU parallel can often be used as a substitute for xargs or cat | bash.
Start by watching the intro videos for a quick introduction: http://www.youtube.com/playlist?list=PL284C9FF2488BC6D1
Then look at the EXAMPLEs after the list of OPTIONS. That will give you an idea of what GNU parallel is capable of.
Then spend an hour walking through the tutorial (man parallel_tutorial). Your command line will love you for it.
Finally you may want to look at the rest of this manual if you have special needs not already covered.
If you want to know the design decisions behind GNU parallel, try: man parallel_design. This is also a good intro if you intend to change GNU parallel.
Command to execute. If command or the following arguments contain replacement strings (such as {}) every instance will be substituted with the input.
If command is given, GNU parallel solve the same tasks as xargs. If command is not given GNU parallel will behave similar to cat | sh.
The command must be an executable, a script, a composed command, or a function.
Bash functions: export -f the function first or use env_parallel.
Bash aliases: Use env_parallel.
Ksh functions and aliases: Use env_parallel.
Zsh functions: Use env_parallel.
Zsh aliases: No solution.
Fish functions and aliases: Use env_parallel.
Ksh functions and aliases: Use env_parallel.
Pdksh functions and aliases: Use env_parallel.
The command cannot contain the character \257 (macron: ¯).
Input line. This replacement string will be replaced by a full line read from the input source. The input source is normally stdin (standard input), but can also be given with -a, :::, or ::::.
The replacement string {} can be changed with -I.
If the command line contains no replacement strings then {} will be appended to the command line.
Input line without extension. This replacement string will be replaced by the input with the extension removed. If the input line contains . after the last / the last . till the end of the string will be removed and {.} will be replaced with the remaining. E.g. foo.jpg becomes foo, subdir/foo.jpg becomes subdir/foo, sub.dir/foo.jpg becomes sub.dir/foo, sub.dir/bar remains sub.dir/bar. If the input line does not contain . it will remain unchanged.
The replacement string {.} can be changed with --er.
To understand replacement strings see {}.
Basename of input line. This replacement string will be replaced by the input with the directory part removed.
The replacement string {/} can be changed with --basenamereplace.
To understand replacement strings see {}.
Dirname of input line. This replacement string will be replaced by the dir of the input line. See dirname(1).
The replacement string {//} can be changed with --dirnamereplace.
To understand replacement strings see {}.
Basename of input line without extension. This replacement string will be replaced by the input with the directory and extension part removed. It is a combination of {/} and {.}.
The replacement string {/.} can be changed with --basenameextensionreplace.
To understand replacement strings see {}.
Sequence number of the job to run. This replacement string will be replaced by the sequence number of the job being run. It contains the same number as $PARALLEL_SEQ.
The replacement string {#} can be changed with --seqreplace.
To understand replacement strings see {}.
Job slot number. This replacement string will be replaced by the job's slot number between 1 and number of jobs to run in parallel. There will never be 2 jobs running at the same time with the same job slot number.
The replacement string {%} can be changed with --slotreplace.
To understand replacement strings see {}.
Argument from input source n or the n'th argument. This positional replacement string will be replaced by the input from input source n (when used with -a or ::::) or with the n'th argument (when used with -N). If n is negative it refers to the n'th last argument.
To understand replacement strings see {}.
Argument from input source n or the n'th argument without extension. It is a combination of {n} and {.}.
This positional replacement string will be replaced by the input from input source n (when used with -a or ::::) or with the n'th argument (when used with -N). The input will have the extension removed.
To understand positional replacement strings see {n}.
Basename of argument from input source n or the n'th argument. It is a combination of {n} and {/}.
This positional replacement string will be replaced by the input from input source n (when used with -a or ::::) or with the n'th argument (when used with -N). The input will have the directory (if any) removed.
To understand positional replacement strings see {n}.
Dirname of argument from input source n or the n'th argument. It is a combination of {n} and {//}.
This positional replacement string will be replaced by the dir of the input from input source n (when used with -a or ::::) or with the n'th argument (when used with -N). See dirname(1).
To understand positional replacement strings see {n}.
Basename of argument from input source n or the n'th argument without extension. It is a combination of {n}, {/}, and {.}.
This positional replacement string will be replaced by the input from input source n (when used with -a or ::::) or with the n'th argument (when used with -N). The input will have the directory (if any) and extension removed.
To understand positional replacement strings see {n}.
Replace with calculated perl expression. $_ will contain the same as {}. After evaluating perl expression $_ will be used as the value. It is recommended to only change $_ but you have full access to all of GNU parallel's internal functions and data structures. A few convenience functions have been made:
shell quote a string
number of jobs in total
Example:
seq 10 | parallel echo {} + 1 is {= '$_++' =}
parallel csh -c {= '$_="mkdir ".Q($_)' =} ::: '12" dir'
seq 50 | parallel echo job {#} of {= '$_=total_jobs()' =}See also: --rpl --parens
Positional equivalent to {=perl expression=}. To understand positional replacement strings see {n}.
See also: {=perl expression=} {n}.
Use arguments from the command line as input source instead of stdin (standard input). Unlike other options for GNU parallel ::: is placed after the command and before the arguments.
The following are equivalent:
(echo file1; echo file2) | parallel gzip
parallel gzip ::: file1 file2
parallel gzip {} ::: file1 file2
parallel --arg-sep ,, gzip {} ,, file1 file2
parallel --arg-sep ,, gzip ,, file1 file2
parallel ::: "gzip file1" "gzip file2"To avoid treating ::: as special use --arg-sep to set the argument separator to something else. See also --arg-sep.
stdin (standard input) will be passed to the first process run.
If multiple ::: are given, each group will be treated as an input source, and all combinations of input sources will be generated. E.g. ::: 1 2 ::: a b c will result in the combinations (1,a) (1,b) (1,c) (2,a) (2,b) (2,c). This is useful for replacing nested for-loops.
::: and :::: can be mixed. So these are equivalent:
parallel echo {1} {2} {3} ::: 6 7 ::: 4 5 ::: 1 2 3
parallel echo {1} {2} {3} :::: <(seq 6 7) <(seq 4 5) \
:::: <(seq 1 3)
parallel -a <(seq 6 7) echo {1} {2} {3} :::: <(seq 4 5) \
:::: <(seq 1 3)
parallel -a <(seq 6 7) -a <(seq 4 5) echo {1} {2} {3} \
::: 1 2 3
seq 6 7 | parallel -a - -a <(seq 4 5) echo {1} {2} {3} \
::: 1 2 3
seq 4 5 | parallel echo {1} {2} {3} :::: <(seq 6 7) - \
::: 1 2 3Like ::: but linked like --xapply to the previous input source.
Contrary to --xapply values do not wrap: The shortest input source determines the length.
Example:
parallel echo ::: a b c :::+ 1 2 3 ::: X Y :::+ 11 22Another way to write -a argfile1 -a argfile2 ...
::: and :::: can be mixed.
See -a, ::: and --xapply.
Like ::::+ but linked like --xapply to the previous input source.
Contrary to --xapply values do not wrap: The shortest input source determines the length.
Use NUL as delimiter. Normally input lines will end in \n (newline). If they end in \0 (NUL), then use this option. It is useful for processing arguments that may contain \n (newline).
Use input-file as input source. If you use this option, stdin (standard input) is given to the first process run. Otherwise, stdin (standard input) is redirected from /dev/null.
If multiple -a are given, each input-file will be treated as an input source, and all combinations of input sources will be generated. E.g. The file foo contains 1 2, the file bar contains a b c. -a foo -a bar will result in the combinations (1,a) (1,b) (1,c) (2,a) (2,b) (2,c). This is useful for replacing nested for-loops.
See also --xapply and {n}.
Use sep-str instead of :::: as separator string between command and argument files. Useful if :::: is used for something else by the command.
See also: ::::.
Use sep-str instead of ::: as separator string. Useful if ::: is used for something else by the command.
Also useful if you command uses ::: but you still want to read arguments from stdin (standard input): Simply change --arg-sep to a string that is not in the command line.
See also: :::.
Show progress as a progress bar. In the bar is shown: % of jobs completed, estimated seconds left, and number of jobs started.
It is compatible with zenity:
seq 1000 | parallel -j30 --bar '(echo {};sleep 0.1)' \
2> >(zenity --progress --auto-kill) | wcfile will be transferred to each sshlogin before a jobs is started. It will be removed if --cleanup is active. The file may be a script to run or some common base data needed for the jobs. Multiple --bf can be specified to transfer more basefiles. The file will be transferred the same way as --transferfile.
Use the replacement string replace-str instead of {/} for basename of input line.
Use the replacement string replace-str instead of {/.} for basename of input line without extension.
Run command in background thus GNU parallel will not wait for completion of the command before exiting. This is the default if --semaphore is set.
See also: --fg, man sem.
Implies --semaphore.
Print the BibTeX entry for GNU parallel and silence citation notice.
If it is impossible for you to run --bibtex you can use --will-cite.
If you use --will-cite in scripts to be run by others you are making it harder for others to see the citation notice. The development of GNU parallel is indirectly financed through citations, so if your users do not know they should cite then you are making it harder to finance development. However, if you pay 10000 EUR, you should feel free to use --will-cite in scripts.
Size of block in bytes to read at a time. The size can be postfixed with K, M, G, T, P, k, m, g, t, or p which would multiply the size with 1024, 1048576, 1073741824, 1099511627776, 1125899906842624, 1000, 1000000, 1000000000, 1000000000000, or 1000000000000000, respectively.
GNU parallel tries to meet the block size but can be off by the length of one record. For performance reasons size should be bigger than a two records. GNU parallel will warn you and automatically increase the size if you choose a size that is too small.
If you use -N, --block-size should be bigger than N+1 records.
size defaults to 1M.
See --pipe and --pipepart for use of this.
Create a temporary file with content. Normally --pipe/--pipepart will give data to the program on stdin (standard input). With --cat GNU parallel will create a temporary file with the name in {}, so you can do: parallel --pipe --cat wc {}.
Implies --pipe unless --pipepart is used.
See also --fifo.
Remove transferred files. --cleanup will remove the transferred files on the remote computer after processing is done.
find log -name '*gz' | parallel \
--sshlogin server.example.com --transferfile {} \
--return {.}.bz2 --cleanup "zcat {} | bzip -9 >{.}.bz2"With --transferfile {} the file transferred to the remote computer will be removed on the remote computer. Directories created will not be removed - even if they are empty.
With --return the file transferred from the remote computer will be removed on the remote computer. Directories created will not be removed - even if they are empty.
--cleanup is ignored when not used with --transferfile or --return.
Column separator. The input will be treated as a table with regexp separating the columns. The n'th column can be access using {n} or {n.}. E.g. {3} is the 3rd column.
--colsep implies --trim rl.
regexp is a Perl Regular Expression: http://perldoc.perl.org/perlre.html
Compress temporary files. If the output is big and very compressible this will take up less disk space in $TMPDIR and possibly be faster due to less disk I/O.
GNU parallel will try lz4, pigz, lzop, plzip, pbzip2, pxz, gzip, lzma, xz, bzip2, lzip in that order, and use the first available.
Use prg for (de)compressing temporary files. It is assumed that prg -dc will decompress stdin (standard input) to stdout (standard output) unless --decompress-program is given.
Input items are terminated by delim. Quotes and backslash are not special; every character in the input is taken literally. Disables the end-of-file string, which is treated like any other argument. The specified delimiter may be characters, C-style character escapes such as \n, or octal or hexadecimal escape codes. Octal and hexadecimal escape codes are understood as for the printf command. Multibyte characters are not supported.
Use the replacement string replace-str instead of {//} for dirname of input line.
Set the end of file string to eof-str. If the end of file string occurs as a line of input, the rest of the input is not read. If neither -E nor -e is used, no end of file string is used.
Delay starting next job secs seconds. GNU parallel will pause secs seconds after starting each job. secs can be less than 1 second.
Print the job to run on stdout (standard output), but do not run the job. Use -v -v to include the wrapping that GNU Parallel generates (for remote jobs, --tmux, --nice, --pipe, --pipepart, --fifo and --cat). Do not count on this literaly, though, as the job may be scheduled on another computer or the local computer if : is in the list.
This option is a synonym for the -E option. Use -E instead, because it is POSIX compliant for xargs while this option is not. If eof-str is omitted, there is no end of file string. If neither -E nor -e is used, no end of file string is used.
Copy environment variable var. This will copy var to the environment that the command is run in. This is especially useful for remote execution.
In Bash var can also be a Bash function - just remember to export -f the function, see command.
The variable '_' is special. It will copy all exported environment variables except for the ones mentioned in ~/.parallel/ignored_vars.
To copy the full environment (both exported and not exported variables, arrays, and functions) use env_parallel as described under the option command.
See also: --record-env.
Show the estimated number of seconds before finishing. This forces GNU parallel to read all jobs before starting to find the number of jobs. GNU parallel normally only reads the next job to run.
Implies --progress.
See also: --bar, --progress.
Run command in foreground thus GNU parallel will wait for completion of the command before exiting.
Implies --semaphore.
See also --bg, man sem.
Create a temporary fifo with content. Normally --pipe and --pipepart will give data to the program on stdin (standard input). With --fifo GNU parallel will create a temporary fifo with the name in {}, so you can do: parallel --pipe --fifo wc {}.
Beware: If data is not read from the fifo, the job will block forever.
Implies --pipe unless --pipepart is used.
See also --cat.
Remove down hosts. For each remote host: check that login through ssh works. If not: do not use this host.
For performance reasons, this check is performed only at the start and every time --sshloginfile is changed. If an host goes down after the first check, it will go undetected until --sshloginfile is changed; --retries can be used to mitigate this.
Currently you can not put --filter-hosts in a profile, $PARALLEL, /etc/parallel/config or similar. This is because GNU parallel uses GNU parallel to compute this, so you will get an infinite loop. This will likely be fixed in a later release.
Behave like GNU parallel. This option historically took precedence over --tollef. The --tollef option is now retired, and therefore may not be used. --gnu is kept for compatibility.
Group output. Output from each jobs is grouped together and is only printed when the command is finished. stderr (standard error) first followed by stdout (standard output). This takes some CPU time. In rare situations GNU parallel takes up lots of CPU time and if it is acceptable that the outputs from different commands are mixed together, then disabling grouping with -u can speedup GNU parallel by a factor of 10.
--group is the default. Can be reversed with -u.
See also: --line-buffer --ungroup
Print a summary of the options to GNU parallel and exit.
When should GNU parallel terminate? In some situations it makes no sense to run all jobs. GNU parallel should simply give up as soon as a condition is met.
val defaults to never, which runs all jobs no matter what.
val can also take on the form of when,why.
when can be 'now' which means kill all running jobs and halt immediately, or it can be 'soon' which means wait for all running jobs to complete, but start no new jobs.
why can be 'fail=X', 'fail=Y%', 'success=X', or 'success=Y%' where X is the number of jobs that has to fail or succeed before halting, and Y is the percentage of jobs that has to fail or succeed before halting.
Example:
exit when the first job fails. Kill running jobs.
exit when 3 jobs fail, but wait for running jobs to complete.
exit when 3% of the jobs have failed, but wait for running jobs to complete.
exit when a job succeeds. Kill running jobs.
exit when 3 jobs succeeds, but wait for running jobs to complete.
exit when 3% of the jobs have succeeded. Kill running jobs.
For backwards compability these also work:
never
soon,fail=1
now,fail=1
soon,success=1
now,success=1
soon,fail=1-99%
Use regexp as header. For normal usage the matched header (typically the first line: --header '.*\n') will be split using --colsep (which will default to '\t') and column names can be used as replacement variables: {column name}.
For --pipe the matched header will be prepended to each output.
--header : is an alias for --header '.*\n'.
If regexp is a number, it is a fixed number of lines.
Enable hostgroups on arguments. If an argument contains '@' the string after '@' will be removed and treated as a list of hostgroups on which this job is allowed to run. If there is no --sshlogin with a corresponding group, the job will run on any hostgroup.
Example:
parallel --hostgroups \
--sshlogin @grp1/myserver1 -S @grp1+grp2/myserver2 \
--sshlogin @grp3/myserver3 \
echo ::: my_grp1_arg@grp1 arg_for_grp2@grp2 third_arg@grp1+grp3my_grp1_arg may be run on either myserver1 or myserver2, third_arg may be run on either myserver1 or myserver3, but arg_for_grp2 will only be run on myserver2.
See also: --sshlogin.
Use the replacement string replace-str instead of {}.
This option is a synonym for -Ireplace-str if replace-str is specified, and for -I{} otherwise. This option is deprecated; use -I instead.
Logfile for executed jobs. Save a list of the executed jobs to logfile in the following TAB separated format: sequence number, sshlogin, start time as seconds since epoch, run time in seconds, bytes in files transferred, bytes in files returned, exit status, signal, and command run.
For --pipe bytes transferred and bytes returned are number of input and output of bytes.
To convert the times into ISO-8601 strict do:
perl -a -F"\t" -ne \
'chomp($F[2]=`date -d \@$F[2] +%FT%T`); print join("\t",@F)'See also --resume --resume-failed.
Number of jobslots on each machine. Run up to N jobs in parallel. 0 means as many as possible. Default is 100% which will run one job per CPU core on each machine.
If --semaphore is set, the default is 1 thus making a mutex.
Add N to the number of CPU cores. Run this many jobs in parallel. See also --use-cpus-instead-of-cores.
Subtract N from the number of CPU cores. Run this many jobs in parallel. If the evaluated number is less than 1 then 1 will be used. See also --use-cpus-instead-of-cores.
Multiply N% with the number of CPU cores. Run this many jobs in parallel. See also --use-cpus-instead-of-cores.
Read parameter from file. Use the content of procfile as parameter for -j. E.g. procfile could contain the string 100% or +2 or 10. If procfile is changed when a job completes, procfile is read again and the new number of jobs is computed. If the number is lower than before, running jobs will be allowed to finish but new jobs will not be started until the wanted number of jobs has been reached. This makes it possible to change the number of simultaneous running jobs while GNU parallel is running.
Keep sequence of output same as the order of input. Normally the output of a job will be printed as soon as the job completes. Try this to see the difference:
parallel -j4 sleep {}\; echo {} ::: 2 1 4 3
parallel -j4 -k sleep {}\; echo {} ::: 2 1 4 3If used with --onall or --nonall the output will grouped by sshlogin in sorted order.
When used with --pipe: Read records of max-lines.
When used otherwise: Use at most max-lines nonblank input lines per command line. Trailing blanks cause an input line to be logically continued on the next input line.
-L 0 means read one line, but insert 0 arguments on the command line.
Implies -X unless -m, --xargs, or --pipe is set.
When used with --pipe: Read records of max-lines.
When used otherwise: Synonym for the -L option. Unlike -L, the max-lines argument is optional. If max-lines is not specified, it defaults to one. The -l option is deprecated since the POSIX standard specifies -L instead.
-l 0 is an alias for -l 1.
Implies -X unless -m, --xargs, or --pipe is set.
Buffer output on line basis. --group will keep the output together for a whole job. --ungroup allows output to mixup with half a line coming from one job and half a line coming from another job. --line-buffer fits between these two: GNU parallel will print a full line, but will allow for mixing lines of different jobs.
--line-buffer takes more CPU power than than both --group and --ungroup, but can be faster than --group if the CPU is not the limiting factor.
See also: --group --ungroup
Do not start new jobs on a given computer unless the number of running processes on the computer is less than max-load. max-load uses the same syntax as --jobs, so 100% for one per CPU is a valid setting. Only difference is 0 which is interpreted as 0.01.
Use ssh's ControlMaster to make ssh connections faster. Useful if jobs run remote and are very fast to run. This is disabled for sshlogins that specify their own ssh command.
Multiple arguments. Insert as many arguments as the command line length permits.
If {} is not used the arguments will be appended to the line. If {} is used multiple times each {} will be replaced with all the arguments.
Support for --xargs with --sshlogin is limited and may fail.
See also -X for context replace. If in doubt use -X as that will most likely do what is needed.
Multiple arguments. Insert as many arguments as the command line length permits. If multiple jobs are being run in parallel: distribute the arguments evenly among the jobs. Use -j1 or --xargs to avoid this.
If {} is not used the arguments will be appended to the line. If {} is used multiple times each {} will be replaced with all the arguments.
Support for -m with --sshlogin is limited and may fail.
See also -X for context replace. If in doubt use -X as that will most likely do what is needed.
Minimum memory free when starting another job. The size can be postfixed with K, M, G, T, P, k, m, g, t, or p which would multiply the size with 1024, 1048576, 1073741824, 1099511627776, 1125899906842624, 1000, 1000000, 1000000000, 1000000000000, or 1000000000000000, respectively.
If the jobs take up very different amount of RAM, GNU parallel will only start as many as there is memory for. If less than size bytes are free, no more jobs will be started. If less than 50% size bytes are free, the youngest job will be killed, and put back on the queue to be run later.
Print the version GNU parallel and exit. If the current version of GNU parallel is less than version the exit code is 255. Otherwise it is 0.
This is useful for scripts that depend on features only available from a certain version of GNU parallel.
--onall with no arguments. Run the command on all computers given with --sshlogin but take no arguments. GNU parallel will log into --jobs number of computers in parallel and run the job on the computer. -j adjusts how many computers to log into in parallel.
This is useful for running the same command (e.g. uptime) on a list of servers.
Run all the jobs on all computers given with --sshlogin. GNU parallel will log into --jobs number of computers in parallel and run one job at a time on the computer. The order of the jobs will not be changed, but some computers may finish before others.
When using --group the output will be grouped by each server, so all the output from one server will be grouped together.
--joblog will contain an entry for each job on each server, so there will be several job sequence 1.
Instead of printing the output to stdout (standard output) the output of each job is saved in a file and the filename is then printed.
See also: --results
Spread input to jobs on stdin (standard input). Read a block of data from stdin (standard input) and give one block of data as input to one job.
The block size is determined by --block. The strings --recstart and --recend tell GNU parallel how a record starts and/or ends. The block read will have the final partial record removed before the block is passed on to the job. The partial record will be prepended to next block.
If --recstart is given this will be used to split at record start.
If --recend is given this will be used to split at record end.
If both --recstart and --recend are given both will have to match to find a split position.
If neither --recstart nor --recend are given --recend defaults to '\n'. To have no record separator use --recend "".
--files is often used with --pipe.
--pipe maxes out at around 1 GB/s input, and 100 MB/s output. If performance is important use --pipepart.
See also: --recstart, --recend, --fifo, --cat, --pipepart.
Pipe parts of a physical file. --pipepart works similar to --pipe, but is much faster. It has a few limitations:
The file must be a physical (seekable) file (not a stream) and must be given using -a or ::::.
Record counting (-N) and line counting (-L/-l) do not work.
Ignore any --profile, $PARALLEL, and ~/.parallel/config to get full control on the command line (used by GNU parallel internally when called with --sshlogin).
Activate additional replacement strings: {+/} {+.} {+..} {+...} {..} {...} {/..} {/...} {##}. The idea being that '{+foo}' matches the opposite of '{foo}' and {} = {+/}/{/} = {.}.{+.} = {+/}/{/.}.{+.} = {..}.{+..} = {+/}/{/..}.{+..} = {...}.{+...} = {+/}/{/...}.{+...}
{##} is the number of jobs to be run. It is incompatible with -X/-m/--xargs.
Show progress of computations. List the computers involved in the task with number of CPU cores detected and the max number of jobs to run. After that show progress for each computer: number of running jobs, number of completed jobs, and percentage of all jobs done by this computer. The percentage will only be available after all jobs have been scheduled as GNU parallel only read the next job when ready to schedule it - this is to avoid wasting time and memory by reading everything at startup.
By sending GNU parallel SIGUSR2 you can toggle turning on/off --progress on a running GNU parallel process.
See also --eta.
Use at most max-args arguments per command line. Fewer than max-args arguments will be used if the size (see the -s option) is exceeded, unless the -x option is given, in which case GNU parallel will exit.
-n 0 means read one argument, but insert 0 arguments on the command line.
Implies -X unless -m is set.
Use at most max-args arguments per command line. Like -n but also makes replacement strings {1} .. {max-args} that represents argument 1 .. max-args. If too few args the {n} will be empty.
-N 0 means read one argument, but insert 0 arguments on the command line.
This will set the owner of the homedir to the user:
tr ':' '\n' < /etc/passwd | parallel -N7 chown {1} {6}Implies -X unless -m or --pipe is set.
When used with --pipe -N is the number of records to read. This is somewhat slower than --block.
Print the maximal number of characters allowed on the command line and exit (used by GNU parallel itself to determine the line length on remote computers).
Print the number of physical CPUs and exit (used by GNU parallel itself to determine the number of physical CPUs on remote computers).
Print the number of CPU cores and exit (used by GNU parallel itself to determine the number of CPU cores on remote computers).
Overrides an earlier --keep-order (e.g. if set in ~/.parallel/config).
Run the command at this niceness. For simple commands you can just add nice in front of the command. But if the command consists of more sub commands (Like: ls|wc) then prepending nice will not always work. --nice will make sure all sub commands are niced - even on remote servers.
Prompt the user about whether to run each command line and read a line from the terminal. Only run the command line if the response starts with 'y' or 'Y'. Implies -t.
Define start and end parenthesis for {= perl expression =}. The left and the right parenthesis can be multiple characters and are assumed to be the same length. The default is {==} giving {= as the start parenthesis and =} as the end parenthesis.
Another useful setting is ,,,, which would make both parenthesis ,,:
parallel --parens ,,,, echo foo is ,,s/I/O/g,, ::: FIISee also: --rpl {= perl expression =}
Use profile profilename for options. This is useful if you want to have multiple profiles. You could have one profile for running jobs in parallel on the local computer and a different profile for running jobs on remote computers. See the section PROFILE FILES for examples.
profilename corresponds to the file ~/.parallel/profilename.
You can give multiple profiles by repeating --profile. If parts of the profiles conflict, the later ones will be used.
Default: config
Quote command. This will quote the command line so special characters are not interpreted by the shell. See the section QUOTING. Most people will never need this. Quoting is disabled by default.
If the stdin (standard input) only contains whitespace, do not run the command.
If used with --pipe this is slow.
Do not start new jobs on a given computer if there is both swap-in and swap-out activity.
The swap activity is only sampled every 10 seconds as the sampling takes 1 second to do.
Swap activity is computed as (swap-in)*(swap-out) which in practice is a good value: swapping out is not a problem, swapping in is not a problem, but both swapping in and out usually indicates a problem.
--memfree may give better results, so try using that first.
Record current environment variables in ~/.parallel/ignored_vars. This is useful before using --env _.
See also --env.
If --recstart is given startstring will be used to split at record start.
If --recend is given endstring will be used to split at record end.
If both --recstart and --recend are given the combined string endstringstartstring will have to match to find a split position. This is useful if either startstring or endstring match in the middle of a record.
If neither --recstart nor --recend are given then --recend defaults to '\n'. To have no record separator use --recend "".
--recstart and --recend are used with --pipe.
Use --regexp to interpret --recstart and --recend as regular expressions. This is slow, however.
Use --regexp to interpret --recstart and --recend as regular expressions. This is slow, however.
Remove the text matched by --recstart and --recend before piping it to the command.
Only used with --pipe.
Save the output into files. The files will be stored in a directory tree rooted at prefix. Within this directory tree, each command will result in two files: prefix/<ARGS>/stdout and prefix/<ARGS>/stderr, where <ARGS> is a sequence of directories representing the header of the input source (if using --header :) or the number of the input source and corresponding values.
E.g:
parallel --header : --results foo echo {a} {b} \
::: a I II ::: b III IIIIwill generate the files:
foo/a/I/b/III/stderr
foo/a/I/b/III/stdout
foo/a/I/b/IIII/stderr
foo/a/I/b/IIII/stdout
foo/a/II/b/III/stderr
foo/a/II/b/III/stdout
foo/a/II/b/IIII/stderr
foo/a/II/b/IIII/stdoutand
parallel --results foo echo {1} {2} ::: I II ::: III IIIIwill generate the files:
foo/1/I/2/III/stderr
foo/1/I/2/III/stdout
foo/1/I/2/IIII/stderr
foo/1/I/2/IIII/stdout
foo/1/II/2/III/stderr
foo/1/II/2/III/stdout
foo/1/II/2/IIII/stderr
foo/1/II/2/IIII/stdoutIf you do not want the dir structure, try --files --tag instead.
See also --files, --tag, --header, --joblog.
Resumes from the last unfinished job. By reading --joblog or the --results dir GNU parallel will figure out the last unfinished job and continue from there. As GNU parallel only looks at the sequence numbers in --joblog then the input, the command, and --joblog all have to remain unchanged; otherwise GNU parallel may run wrong commands.
See also --joblog, --results, --resume-failed.
Retry all failed and resume from the last unfinished job. By reading --joblog GNU parallel will figure out the failed jobs and run those again. After that it will resume last unfinished job and continue from there. As GNU parallel only looks at the sequence numbers in --joblog then the input, the command, and --joblog all have to remain unchanged; otherwise GNU parallel may run wrong commands.
See also --joblog, --resume.
Retry all failed jobs in joblog. By reading --joblog GNU parallel will figure out the failed jobs and run those again.
--retry-failed ignore the command and arguments: It only looks at the joblog.
See also --joblog, --resume, --resume-failed.
If a job fails, retry it on another computer on which it has not failed. Do this n times. If there are fewer than n computers in --sshlogin GNU parallel will re-use all the computers. This is useful if some jobs fail for no apparent reason (such as network failure).
Transfer files from remote computers. --return is used with --sshlogin when the arguments are files on the remote computers. When processing is done the file filename will be transferred from the remote computer using rsync and will be put relative to the default login dir. E.g.
echo foo/bar.txt | parallel --return {.}.out \
--sshlogin server.example.com touch {.}.outThis will transfer the file $HOME/foo/bar.out from the computer server.example.com to the file foo/bar.out after running touch foo/bar.out on server.example.com.
parallel -S server --trc out/./{}.out touch {}.out ::: in/fileThis will transfer the file in/file.out from the computer server.example.com to the files out/in/file.out after running touch in/file.out on server.
echo /tmp/foo/bar.txt | parallel --return {.}.out \
--sshlogin server.example.com touch {.}.outThis will transfer the file /tmp/foo/bar.out from the computer server.example.com to the file /tmp/foo/bar.out after running touch /tmp/foo/bar.out on server.example.com.
Multiple files can be transferred by repeating the option multiple times:
echo /tmp/foo/bar.txt | parallel \
--sshlogin server.example.com \
--return {.}.out --return {.}.out2 touch {.}.out {.}.out2--return is often used with --transferfile and --cleanup.
--return is ignored when used with --sshlogin : or when not used with --sshlogin.
Normally --pipe will give a single block to each instance of the command. With --round-robin all blocks will at random be written to commands already running. This is useful if the command takes a long time to initialize.
--keep-order will not work with --round-robin as it is impossible to track which input block corresponds to which output.
--round-robin implies --pipe.
Use tag as a replacement string for perl expression. This makes it possible to define your own replacement strings. GNU parallel's 7 replacement strings are implemented as:
--rpl '{} '
--rpl '{#} 1 $_=$job->seq()'
--rpl '{%} 1 $_=$job->slot()'
--rpl '{/} s:.*/::'
--rpl '{//} $Global::use{"File::Basename"} ||= eval "use File::Basename; 1;"; $_ = dirname($_);'
--rpl '{/.} s:.*/::; s:\.[^/.]+$::;'
--rpl '{.} s:\.[^/.]+$::'The --plus replacement strings are implemented as:
--rpl '{+/} s:/[^/]*$::'
--rpl '{+.} s:.*\.::'
--rpl '{+..} s:.*\.([^.]*\.):$1:'
--rpl '{+...} s:.*\.([^.]*\.[^.]*\.):$1:'
--rpl '{..} s:\.[^/.]+$::; s:\.[^/.]+$::'
--rpl '{...} s:\.[^/.]+$::; s:\.[^/.]+$::; s:\.[^/.]+$::'
--rpl '{/..} s:.*/::; s:\.[^/.]+$::; s:\.[^/.]+$::'
--rpl '{/...} s:.*/::; s:\.[^/.]+$::; s:\.[^/.]+$::; s:\.[^/.]+$::'
--rpl '{##} $_=total_jobs()'If the user defined replacement string starts with '{' it can also be used as a positional replacement string (like {2.}).
It is recommended to only change $_ but you have full access to all of GNU parallel's internal functions and data structures.
Here are a few examples:
Is the job sequence even or odd?
--rpl '{odd} $_ = $job->seq() % 2 ? "odd" : "even"'
Pad job sequence with leading zeros to get equal width
--rpl '{0#} $f = "%0".int(1+log(total_jobs())/log(10))."d"; $_=sprintf($f,$job->seq())'
Job sequence counting from 0
--rpl '{#0} $_ = $job->seq() - 1'See also: {= perl expression =} --parens
Use at most max-chars characters per command line, including the command and initial-arguments and the terminating nulls at the ends of the argument strings. The largest allowed value is system-dependent, and is calculated as the argument length limit for exec, less the size of your environment. The default value is the maximum.
Implies -X unless -m is set.
Display the limits on the command-line length which are imposed by the operating system and the -s option. Pipe the input from /dev/null (and perhaps specify --no-run-if-empty) if you don't want GNU parallel to do anything.
Work as a counting semaphore. --semaphore will cause GNU parallel to start command in the background. When the number of jobs given by --jobs is reached, GNU parallel will wait for one of these to complete before starting another command.
--semaphore implies --bg unless --fg is specified.
--semaphore implies --semaphorename `tty` unless --semaphorename is specified.
Used with --fg, --wait, and --semaphorename.
The command sem is an alias for parallel --semaphore.
See also man sem.
Use name as the name of the semaphore. Default is the name of the controlling tty (output from tty).
The default normally works as expected when used interactively, but when used in a script name should be set. $$ or my_task_name are often a good value.
The semaphore is stored in ~/.parallel/semaphores/
Implies --semaphore.
See also man sem.
If secs > 0: If the semaphore is not released within secs seconds, take it anyway.
If secs < 0: If the semaphore is not released within secs seconds, exit.
Implies --semaphore.
See also man sem.
Use the replacement string replace-str instead of {#} for job sequence number.
GNU parallel can be called as a shebang (#!) command as the first line of a script. The content of the file will be treated as inputsource.
Like this:
#!/usr/bin/parallel --shebang -r traceroute
qubes-os.org
debian.org
freenetproject.org--shebang must be set as the first option.
On FreeBSD env is needed:
#!/usr/bin/env -S parallel --shebang -r traceroute
qubes-os.org
debian.org
freenetproject.orgThere are many limitations of shebang (#!) depending on your operating system. See details on http://www.in-ulm.de/~mascheck/various/shebang/
GNU parallel can parallelize scripts by wrapping the shebang line. If the program can be run like this:
cat arguments | parallel the_programthen the script can be changed to:
#!/usr/bin/parallel --shebang-wrap /the/original/parser --with-optionsE.g.
#!/usr/bin/parallel --shebang-wrap /usr/bin/pythonIf the program can be run like this:
cat data | parallel --pipe the_programthen the script can be changed to:
#!/usr/bin/parallel --shebang-wrap --pipe /the/original/parser --with-optionsE.g.
#!/usr/bin/parallel --shebang-wrap --pipe /usr/bin/perl -w--shebang-wrap must be set as the first option.
Does not run the command but quotes it. Useful for making quoted composed commands for GNU parallel.
Shuffle jobs. When having multiple input sources it is hard to randomize jobs. --shuf will generate all jobs, and shuffle them before running them. This is useful to get a quick preview of the results before running the full batch.
Do not use the first line of input (used by GNU parallel itself when called with --shebang).
Use --sqlmaster instead.
Submit jobs via SQL server. DBURL must point to a table, which will contain the same information as --joblog, the values from the input sources (stored in columns V1 .. Vn), and the output (stored in columns Stdout and Stderr).
The table will be dropped and created with the correct amount of V-columns.
--sqlmaster does not run any jobs, but it creates the values for the jobs to be run and wait for them to complete. One or more --sqlworker must be run to actually execute the jobs.
The format of a DBURL is:
[sql:]vendor://[[user][:password]@][host][:port]/[database]/tableE.g.
sql:mysql://hr:hr@localhost:3306/hrdb/jobs
mysql://scott:tiger@my.example.com/pardb/paralleljobs
sql:oracle://scott:tiger@ora.example.com/xe/parjob
postgresql://scott:tiger@pg.example.com/pgdb/parjob
pg:///parjob
sqlite3:///pardb/parjobIt can also be an alias from ~/.sql/aliases:
:myalias mysql:///mydb/paralleljobsShorthand for: --sqlmaster DBURL --sqlworker DBURL.
Execute jobs via SQL server. Read the input sources variables from the table pointed to by DBURL. The command on the command line should be the same as given by --sqlmaster.
GNU parallel defaults to using ssh for remote access. This can be overridden with --ssh. It can also be set on a per server basis (see --sshlogin).
Delay starting next ssh by secs seconds. GNU parallel will pause secs seconds after starting each ssh. secs can be less than 1 seconds.
Distribute jobs to remote computers. The jobs will be run on a list of remote computers.
If hostgroups is given, the sshlogin will be added to that hostgroup. Multiple hostgroups are separated by '+'. The sshlogin will always be added to a hostgroup named the same as sshlogin.
If only the @hostgroup is given, only the sshlogins in that hostgroup will be used. Multiple @hostgroup can be given.
GNU parallel will determine the number of CPU cores on the remote computers and run the number of jobs as specified by -j. If the number ncpu is given GNU parallel will use this number for number of CPU cores on the host. Normally ncpu will not be needed.
An sshlogin is of the form:
[sshcommand [options]] [username@]hostnameThe sshlogin must not require a password (ssh-agent, ssh-copy-id, and sshpass may help with that).
The sshlogin ':' is special, it means 'no ssh' and will therefore run on the local computer.
The sshlogin '..' is special, it read sshlogins from ~/.parallel/sshloginfile
The sshlogin '-' is special, too, it read sshlogins from stdin (standard input).
To specify more sshlogins separate the sshlogins by comma, newline (in the same string), or repeat the options multiple times.
For examples: see --sshloginfile.
The remote host must have GNU parallel installed.
--sshlogin is known to cause problems with -m and -X.
--sshlogin is often used with --transferfile, --return, --cleanup, and --trc.
File with sshlogins. The file consists of sshlogins on separate lines. Empty lines and lines starting with '#' are ignored. Example:
server.example.com
username@server2.example.com
8/my-8-core-server.example.com
2/my_other_username@my-dualcore.example.net
# This server has SSH running on port 2222
ssh -p 2222 server.example.net
4/ssh -p 2222 quadserver.example.net
# Use a different ssh program
myssh -p 2222 -l myusername hexacpu.example.net
# Use a different ssh program with default number of cores
//usr/local/bin/myssh -p 2222 -l myusername hexacpu
# Use a different ssh program with 6 cores
6//usr/local/bin/myssh -p 2222 -l myusername hexacpu
# Assume 16 cores on the local computer
16/:
# Put server1 in hostgroup1
@hostgroup1/server1
# Put myusername@server2 in hostgroup1+hostgroup2
@hostgroup1+hostgroup2/myusername@server2
# Force 4 cores and put 'ssh -p 2222 server3' in hostgroup1
@hostgroup1/4/ssh -p 2222 server3When using a different ssh program the last argument must be the hostname.
Multiple --sshloginfile are allowed.
GNU parallel will first look for the file in current dir; if that fails it look for the file in ~/.parallel.
The sshloginfile '..' is special, it read sshlogins from ~/.parallel/sshloginfile
The sshloginfile '.' is special, it read sshlogins from /etc/parallel/sshloginfile
The sshloginfile '-' is special, too, it read sshlogins from stdin (standard input).
If the sshloginfile is changed it will be re-read when a job finishes though at most once per second. This makes it possible to add and remove hosts while running.
This can be used to have a daemon that updates the sshloginfile to only contain servers that are up:
cp original.slf tmp2.slf
while [ 1 ] ; do
nice parallel --nonall -j0 -k --slf original.slf \
--tag echo | perl 's/\t$//' > tmp.slf
if diff tmp.slf tmp2.slf; then
mv tmp.slf tmp2.slf
fi
sleep 10
done &
parallel --slf tmp2.slf ...Use the replacement string replace-str instead of {%} for job slot number.
Silent. The job to be run will not be printed. This is the default. Can be reversed with -v.
Open terminal tty. If GNU parallel is used for starting an interactive program then this option may be needed. It will start only one job at a time (i.e. -j1), not buffer the output (i.e. -u), and it will open a tty for the job. When the job is done, the next job will get the tty.
You can of course override -j1 and -u.
Tag lines with arguments. Each output line will be prepended with the arguments and TAB (\t). When combined with --onall or --nonall the lines will be prepended with the sshlogin instead.
--tag is ignored when using -u.
Tag lines with a string. Each output line will be prepended with str and TAB (\t). str can contain replacement strings such as {}.
--tagstring is ignored when using -u, --onall, and --nonall.
Termination sequence. When a job is killed due to --timeout, --memfree, --halt, or abnormal termination of GNU parallel, sequence determines how the job is killed. The default is:
TERM,200,TERM,100,TERM,50,KILL,25which sends a TERM signal, waits 200 ms, sends another TERM signal, waits 100 ms, sends another TERM signal, waits 50 ms, sends a KILL signal, waits 25 ms, and exits. GNU parallel discovers if a process dies before the waiting time is up.
Directory for temporary files. GNU parallel normally buffers output into temporary files in /tmp. By setting --tmpdir you can use a different dir for the files. Setting --tmpdir is equivalent to setting $TMPDIR.
Use tmux for output. Start a tmux session and run each job in a window in that session. No other output will be produced.
Time out for command. If the command runs for longer than secs seconds it will get killed with SIGTERM, followed by SIGTERM 200 ms later, followed by SIGKILL 200 ms later.
If secs is followed by a % then the timeout will dynamically be computed as a percentage of the median average runtime. Only values > 100% will make sense.
Print the job to be run on stderr (standard error).
See also -v, -p.
Transfer files to remote computers. Shorthand for: --transferfile {}.
--transferfile is used with --sshlogin to transfer files to the remote computers. The files will be transferred using rsync and will be put relative to the default work dir. If the path contains /./ the remaining path will be relative to the work dir. E.g.
echo foo/bar.txt | parallel \
--sshlogin server.example.com --transferfile {} wcThis will transfer the file foo/bar.txt to the computer server.example.com to the file $HOME/foo/bar.txt before running wc foo/bar.txt on server.example.com.
echo /tmp/foo/bar.txt | parallel \
--sshlogin server.example.com --transferfile {} wcThis will transfer the file /tmp/foo/bar.txt to the computer server.example.com to the file /tmp/foo/bar.txt before running wc /tmp/foo/bar.txt on server.example.com.
echo /tmp/./foo/bar.txt | parallel \
--sshlogin server.example.com --transferfile {} wc {= s:.*/./:./: =}This will transfer the file /tmp/foo/bar.txt to the computer server.example.com to the file foo/bar.txt before running wc ./foo/bar.txt on server.example.com.
--transferfile is often used with --return and --cleanup. A shorthand for --transferfile {} is --transfer.
--transferfile is ignored when used with --sshlogin : or when not used with --sshlogin.
Transfer, Return, Cleanup. Shorthand for:
--transferfile {} --return filename --cleanup
Trim white space in input.
No trim. Input is not modified. This is the default.
Left trim. Remove white space from start of input. E.g. " a bc " -> "a bc ".
Right trim. Remove white space from end of input. E.g. " a bc " -> " a bc".
Both trim. Remove white space from both start and end of input. E.g. " a bc " -> "a bc". This is the default if --colsep is used.
Ungroup output. Output is printed as soon as possible and by passes GNU parallel internal processing. This may cause output from different commands to be mixed thus should only be used if you do not care about the output. Compare these:
seq 4 | parallel -j0 \
'sleep {};echo -n start{};sleep {};echo {}end'
seq 4 | parallel -u -j0 \
'sleep {};echo -n start{};sleep {};echo {}end'It also disables --tag. GNU parallel outputs faster with -u. Compare the speed of these:
parallel seq ::: 300000000 >/dev/null
parallel -u seq ::: 300000000 >/dev/null
parallel --line-buffer seq ::: 300000000 >/dev/nullCan be reversed with --group.
See also: --line-buffer --group
Use the replacement string replace-str instead of {.} for input line without extension.
Count the number of physical CPUs instead of CPU cores. When computing how many jobs to run simultaneously relative to the number of CPU cores you can ask GNU parallel to instead look at the number of physical CPUs. This will make sense for computers that have hyperthreading as two jobs running on one CPU with hyperthreading will run slower than two jobs running on two physical CPUs. Some multi-core CPUs can run faster if only one thread is running per physical CPU. Most users will not need this option.
Verbose. Print the job to be run on stdout (standard output). Can be reversed with --silent. See also -t.
Use -v -v to print the wrapping ssh command when running remotely.
Print the version GNU parallel and exit.
Files transferred using --transferfile and --return will be relative to mydir on remote computers, and the command will be executed in the dir mydir.
The special mydir value ... will create working dirs under ~/.parallel/tmp/ on the remote computers. If --cleanup is given these dirs will be removed.
The special mydir value . uses the current working dir. If the current working dir is beneath your home dir, the value . is treated as the relative path to your home dir. This means that if your home dir is different on remote computers (e.g. if your login is different) the relative path will still be relative to your home dir.
To see the difference try:
parallel -S server pwd ::: ""
parallel --wd . -S server pwd ::: ""
parallel --wd ... -S server pwd ::: ""mydir can contain GNU parallel's replacement strings.
Wait for all commands to complete.
Implies --semaphore.
See also man sem.
Multiple arguments with context replace. Insert as many arguments as the command line length permits. If multiple jobs are being run in parallel: distribute the arguments evenly among the jobs. Use -j1 to avoid this.
If {} is not used the arguments will be appended to the line. If {} is used as part of a word (like pic{}.jpg) then the whole word will be repeated. If {} is used multiple times each {} will be replaced with the arguments.
Normally -X will do the right thing, whereas -m can give unexpected results if {} is used as part of a word.
Support for -X with --sshlogin is limited and may fail.
See also -m.
Exit if the size (see the -s option) is exceeded.
Read multiple input sources like xapply. If multiple input sources are given, one argument will be read from each of the input sources. The arguments can be accessed in the command as {1} .. {n}, so {1} will be a line from the first input source, and {6} will refer to the line with the same line number from the 6th input source.
Compare these two:
parallel echo {1} {2} ::: 1 2 3 ::: a b c
parallel --xapply echo {1} {2} ::: 1 2 3 ::: a b cArguments will be recycled if one input source has more arguments than the others:
parallel --xapply echo {1} {2} {3} \
::: 1 2 ::: I II III ::: a b c d e f gSee also --header.
GNU parallel can work similar to xargs -n1.
To compress all html files using gzip run:
find . -name '*.html' | parallel gzip --bestIf the file names may contain a newline use -0. Substitute FOO BAR with FUBAR in all files in this dir and subdirs:
find . -type f -print0 | parallel -q0 perl -i -pe 's/FOO BAR/FUBAR/g'Note -q is needed because of the space in 'FOO BAR'.
GNU parallel can take the arguments from command line instead of stdin (standard input). To compress all html files in the current dir using gzip run:
parallel gzip --best ::: *.htmlTo convert *.wav to *.mp3 using LAME running one process per CPU core run:
parallel lame {} -o {.}.mp3 ::: *.wavWhen moving a lot of files like this: mv *.log destdir you will sometimes get the error:
bash: /bin/mv: Argument list too longbecause there are too many files. You can instead do:
ls | grep -E '\.log$' | parallel mv {} destdirThis will run mv for each file. It can be done faster if mv gets as many arguments that will fit on the line:
ls | grep -E '\.log$' | parallel -m mv {} destdirTo remove the files pict0000.jpg .. pict9999.jpg you could do:
seq -w 0 9999 | parallel rm pict{}.jpgYou could also do:
seq -w 0 9999 | perl -pe 's/(.*)/pict$1.jpg/' | parallel -m rmThe first will run rm 10000 times, while the last will only run rm as many times needed to keep the command line length short enough to avoid Argument list too long (it typically runs 1-2 times).
You could also run:
seq -w 0 9999 | parallel -X rm pict{}.jpgThis will also only run rm as many times needed to keep the command line length short enough.
If ImageMagick is installed this will generate a thumbnail of a jpg file:
convert -geometry 120 foo.jpg thumb_foo.jpgThis will run with number-of-cpu-cores jobs in parallel for all jpg files in a directory:
ls *.jpg | parallel convert -geometry 120 {} thumb_{}To do it recursively use find:
find . -name '*.jpg' | parallel convert -geometry 120 {} {}_thumb.jpgNotice how the argument has to start with {} as {} will include path (e.g. running convert -geometry 120 ./foo/bar.jpg thumb_./foo/bar.jpg would clearly be wrong). The command will generate files like ./foo/bar.jpg_thumb.jpg.
Use {.} to avoid the extra .jpg in the file name. This command will make files like ./foo/bar_thumb.jpg:
find . -name '*.jpg' | parallel convert -geometry 120 {} {.}_thumb.jpgThis will generate an uncompressed version of .gz-files next to the .gz-file:
parallel zcat {} ">"{.} ::: *.gzQuoting of > is necessary to postpone the redirection. Another solution is to quote the whole command:
parallel "zcat {} >{.}" ::: *.gzOther special shell characters (such as * ; $ > < | >> <<) also need to be put in quotes, as they may otherwise be interpreted by the shell and not given to GNU parallel.
A job can consist of several commands. This will print the number of files in each directory:
ls | parallel 'echo -n {}" "; ls {}|wc -l'To put the output in a file called <name>.dir:
ls | parallel '(echo -n {}" "; ls {}|wc -l) >{}.dir'Even small shell scripts can be run by GNU parallel:
find . | parallel 'a={}; name=${a##*/};' \
'upper=$(echo "$name" | tr "[:lower:]" "[:upper:]");'\
'echo "$name - $upper"'
ls | parallel 'mv {} "$(echo {} | tr "[:upper:]" "[:lower:]")"'Given a list of URLs, list all URLs that fail to download. Print the line number and the URL.
cat urlfile | parallel "wget {} 2>/dev/null || grep -n {} urlfile"Create a mirror directory with the same filenames except all files and symlinks are empty files.
cp -rs /the/source/dir mirror_dir
find mirror_dir -type l | parallel -m rm {} '&&' touch {}Find the files in a list that do not exist
cat file_list | parallel 'if [ ! -e {} ] ; then echo {}; fi'You have a dir with files named as 24 hours in 5 minute intervals: 00:00, 00:05, 00:10 .. 23:55. You want to find the files missing:
parallel [ -f {1}:{2} ] "||" echo {1}:{2} does not exist ::: {00..23} ::: {00..55..5}If the composed command is longer than a line, it becomes hard to read. In Bash you can use functions. Just remember to export -f the function.
doit() {
echo Doing it for $1
sleep 2
echo Done with $1
}
export -f doit
parallel doit ::: 1 2 3
doubleit() {
echo Doing it for $1 $2
sleep 2
echo Done with $1 $2
}
export -f doubleit
parallel doubleit ::: 1 2 3 ::: a bTo do this on remote servers you need to transfer the function using --env:
parallel --env doit -S server doit ::: 1 2 3
parallel --env doubleit -S server doubleit ::: 1 2 3 ::: a bIf your environment (aliases, variables, and functions) is small you can copy the full environment without having to export -f anything. See env_parallel earlier in the man page.
To test a program with different parameters:
tester() {
if (eval "$@") >&/dev/null; then
perl -e 'printf "\033[30;102m[ OK ]\033[0m @ARGV\n"' "$@"
else
perl -e 'printf "\033[30;101m[FAIL]\033[0m @ARGV\n"' "$@"
fi
}
export -f tester
parallel tester my_program ::: arg1 arg2
parallel tester exit ::: 1 0 2 0If my_program fails a red FAIL will be printed followed by the failing command; otherwise a green OK will be printed followed by the command.
Log rotation renames a logfile to an extension with a higher number: log.1 becomes log.2, log.2 becomes log.3, and so on. The oldest log is removed. To avoid overwriting files the process starts backwards from the high number to the low number. This will keep 10 old versions of the log:
seq 9 -1 1 | parallel -j1 mv log.{} log.'{= $_++ =}'
mv log log.1When processing files removing the file extension using {.} is often useful.
Create a directory for each zip-file and unzip it in that dir:
parallel 'mkdir {.}; cd {.}; unzip ../{}' ::: *.zipRecompress all .gz files in current directory using bzip2 running 1 job per CPU core in parallel:
parallel "zcat {} | bzip2 >{.}.bz2 && rm {}" ::: *.gzConvert all WAV files to MP3 using LAME:
find sounddir -type f -name '*.wav' | parallel lame {} -o {.}.mp3Put all converted in the same directory:
find sounddir -type f -name '*.wav' | \
parallel lame {} -o mydir/{/.}.mp3If you have directory with tar.gz files and want these extracted in the corresponding dir (e.g foo.tar.gz will be extracted in the dir foo) you can do:
parallel --plus 'mkdir {..}; tar -C {..} -xf {}' ::: *.tar.gzLet us assume a website stores images like:
http://www.example.com/path/to/YYYYMMDD_##.jpgwhere YYYYMMDD is the date and ## is the number 01-10. This will download images for the past 30 days:
parallel wget http://www.example.com/path/to/'$(date -d "today -{1} days" +%Y%m%d)_{2}.jpg' ::: $(seq 30) ::: $(seq -w 10)$(date -d "today -{1} days" +%Y%m%d) will give the dates in YYYYMMDD with {1} days subtracted.
find . | parallel cp {} \
'../destdir/{= $a=int(10000*rand); $_=`date -r "$_" +%FT%T"$a"`; chomp; =}'{= and =} mark a perl expression. date +%FT%T is the date in ISO8601 with time.
The : in a digital clock blinks. To make every other line have a ':' and the rest a ' ' a perl expression is used to look at the 3rd input source. If the value modudo 2 is 1: Use ":" otherwise use " ":
parallel -k echo {1}'{=3 $_=$_%2?":":" "=}'{2}{3} \
::: {0..12} ::: {0..5} ::: {0..9}This:
parallel --header : echo x{X}y{Y}z{Z} \> x{X}y{Y}z{Z} \
::: X {1..5} ::: Y {01..10} ::: Z {1..5}will generate the files x1y01z1 .. x5y10z5. If you want to aggregate the output grouping on x and z you can do this:
parallel eval 'cat {=s/y01/y*/=} > {=s/y01//=}' ::: *y01*For all values of x and z it runs commands like:
cat x1y*z1 > x1z1So you end up with x1z1 .. x5z5 each containing the content of all values of y.
This script below will crawl and mirror a URL in parallel. It downloads first pages that are 1 click down, then 2 clicks down, then 3; instead of the normal depth first, where the first link link on each page is fetched first.
Run like this:
PARALLEL=-j100 ./parallel-crawl http://gatt.org.yeslab.org/Remove the wget part if you only want a web crawler.
It works by fetching a page from a list of URLs and looking for links in that page that are within the same starting URL and that have not already been seen. These links are added to a new queue. When all the pages from the list is done, the new queue is moved to the list of URLs and the process is started over until no unseen links are found.
#!/bin/bash
# E.g. http://gatt.org.yeslab.org/
URL=$1
# Stay inside the start dir
BASEURL=$(echo $URL | perl -pe 's:#.*::; s:(//.*/)[^/]*:$1:')
URLLIST=$(mktemp urllist.XXXX)
URLLIST2=$(mktemp urllist.XXXX)
SEEN=$(mktemp seen.XXXX)
# Spider to get the URLs
echo $URL >$URLLIST
cp $URLLIST $SEEN
while [ -s $URLLIST ] ; do
cat $URLLIST |
parallel lynx -listonly -image_links -dump {} \; \
wget -qm -l1 -Q1 {} \; echo Spidered: {} \>\&2 |
perl -ne 's/#.*//; s/\s+\d+.\s(\S+)$/$1/ and do { $seen{$1}++ or print }' |
grep -F $BASEURL |
grep -v -x -F -f $SEEN | tee -a $SEEN > $URLLIST2
mv $URLLIST2 $URLLIST
done
rm -f $URLLIST $URLLIST2 $SEENIf the files to be processed are in a tar file then unpacking one file and processing it immediately may be faster than first unpacking all files.
tar xvf foo.tgz | perl -ne 'print $l;$l=$_;END{print $l}' | \
parallel echoThe Perl one-liner is needed to make sure the file is complete before handing it to GNU parallel.
for-loops like this:
(for x in `cat list` ; do
do_something $x
done) | process_outputand while-read-loops like this:
cat list | (while read x ; do
do_something $x
done) | process_outputcan be written like this:
cat list | parallel do_something | process_outputFor example: Find which host name in a list has IP address 1.2.3 4:
cat hosts.txt | parallel -P 100 host | grep 1.2.3.4If the processing requires more steps the for-loop like this:
(for x in `cat list` ; do
no_extension=${x%.*};
do_something $x scale $no_extension.jpg
do_step2 <$x $no_extension
done) | process_outputand while-loops like this:
cat list | (while read x ; do
no_extension=${x%.*};
do_something $x scale $no_extension.jpg
do_step2 <$x $no_extension
done) | process_outputcan be written like this:
cat list | parallel "do_something {} scale {.}.jpg ; do_step2 <{} {.}" |\
process_outputIf the body of the loop is bigger, it improves readability to use a function:
(for x in `cat list` ; do
do_something $x
[... 100 lines that do something with $x ...]
done) | process_output
cat list | (while read x ; do
do_something $x
[... 100 lines that do something with $x ...]
done) | process_outputcan both be rewritten as:
doit() {
x=$1
do_something $x
[... 100 lines that do something with $x ...]
}
export -f doit
cat list | parallel doitNested for-loops like this:
(for x in `cat xlist` ; do
for y in `cat ylist` ; do
do_something $x $y
done
done) | process_outputcan be written like this:
parallel do_something {1} {2} :::: xlist ylist | process_outputNested for-loops like this:
(for colour in red green blue ; do
for size in S M L XL XXL ; do
echo $colour $size
done
done) | sortcan be written like this:
parallel echo {1} {2} ::: red green blue ::: S M L XL XXL | sortdiff is good for finding differences in text files. diff | wc -l gives an indication of the size of the difference. To find the differences between all files in the current dir do:
parallel --tag 'diff {1} {2} | wc -l' ::: * ::: * | sort -nk3This way it is possible to see if some files are closer to other files.
When doing multiple nested for-loops it can be easier to keep track of the loop variable if is is named instead of just having a number. Use --header : to let the first argument be an named alias for the positional replacement string:
parallel --header : echo {colour} {size} ::: colour red green blue ::: size S M L XL XXLThis also works if the input file is a file with columns:
cat addressbook.tsv | \
parallel --colsep '\t' --header : echo {Name} {E-mail address}Using --results the results are saved in /tmp/diffcount*.
parallel --results /tmp/diffcount "diff -U 0 {1} {2} | \
tail -n +3 |grep -v '^@'|wc -l" ::: * ::: *To see the difference between file A and file B look at the file '/tmp/diffcount/1/A/2/B'.
Starting a job on the local machine takes around 10 ms. This can be a big overhead if the job takes very few ms to run. Often you can group small jobs together using -X which will make the overhead less significant. Compare the speed of these:
seq -w 0 9999 | parallel touch pict{}.jpg
seq -w 0 9999 | parallel -X touch pict{}.jpgIf your program cannot take multiple arguments, then you can use GNU parallel to spawn multiple GNU parallels:
seq -w 0 999999 | parallel -j10 --pipe parallel -j0 touch pict{}.jpgIf -j0 normally spawns 252 jobs, then the above will try to spawn 2520 jobs. On a normal GNU/Linux system you can spawn 32000 jobs using this technique with no problems. To raise the 32000 jobs limit raise /proc/sys/kernel/pid_max to 4194303.
When using shell variables you need to quote them correctly as they may otherwise be split on spaces.
Notice the difference between:
V=("My brother's 12\" records are worth <\$\$\$>"'!' Foo Bar)
parallel echo ::: ${V[@]} # This is probably not what you wantand:
V=("My brother's 12\" records are worth <\$\$\$>"'!' Foo Bar)
parallel echo ::: "${V[@]}"When using variables in the actual command that contains special characters (e.g. space) you can quote them using '"$VAR"' or using "'s and -q:
V="Here are two "
parallel echo "'$V'" ::: spaces
parallel -q echo "$V" ::: spacesWhen running jobs that output data, you often do not want the output of multiple jobs to run together. GNU parallel defaults to grouping the output of each job, so the output is printed when the job finishes. If you want full lines to be printed while the job is running you can use --line-buffer. If you want output to be printed as soon as possible you can use -u.
Compare the output of:
parallel traceroute ::: qubes-os.org debian.org freenetproject.org
parallel --line-buffer traceroute ::: qubes-os.org debian.org freenetproject.org
parallel -u traceroute ::: qubes-os.org debian.org freenetproject.orgGNU parallel groups the output lines, but it can be hard to see where the different jobs begin. --tag prepends the argument to make that more visible:
parallel --tag traceroute ::: qubes-os.org debian.org freenetproject.org--tag works with --line-buffer but not with -u:
parallel --tag --line-buffer traceroute \
::: qubes-os.org debian.org freenetproject.orgCheck the uptime of the servers in ~/.parallel/sshloginfile:
parallel --tag -S .. --nonall uptimeNormally the output of a job will be printed as soon as it completes. Sometimes you want the order of the output to remain the same as the order of the input. This is often important, if the output is used as input for another system. -k will make sure the order of output will be in the same order as input even if later jobs end before earlier jobs.
Append a string to every line in a text file:
cat textfile | parallel -k echo {} append_stringIf you remove -k some of the lines may come out in the wrong order.
Another example is traceroute:
parallel traceroute ::: qubes-os.org debian.org freenetproject.orgwill give traceroute of qubes-os.org, debian.org and freenetproject.org, but it will be sorted according to which job completed first.
To keep the order the same as input run:
parallel -k traceroute ::: qubes-os.org debian.org freenetproject.orgThis will make sure the traceroute to qubes-os.org will be printed first.
A bit more complex example is downloading a huge file in chunks in parallel: Some internet connections will deliver more data if you download files in parallel. For downloading files in parallel see: "EXAMPLE: Download 10 images for each of the past 30 days". But if you are downloading a big file you can download the file in chunks in parallel.
To download byte 10000000-19999999 you can use curl:
curl -r 10000000-19999999 http://example.com/the/big/file >file.partTo download a 1 GB file we need 100 10MB chunks downloaded and combined in the correct order.
seq 0 99 | parallel -k curl -r \
{}0000000-{}9999999 http://example.com/the/big/file > filegrep -r greps recursively through directories. On multicore CPUs GNU parallel can often speed this up.
find . -type f | parallel -k -j150% -n 1000 -m grep -H -n STRING {}This will run 1.5 job per core, and give 1000 arguments to grep.
The simplest solution to grep a big file for a lot of regexps is:
grep -f regexps.txt bigfileOr if the regexps are fixed strings:
grep -F -f regexps.txt bigfileThere are 2 limiting factors: CPU and disk I/O. CPU is easy to measure: If the grep takes >90% CPU (e.g. when running top), then the CPU is a limiting factor, and parallelization will speed this up. If not, then disk I/O is the limiting factor, and depending on the disk system it may be faster or slower to parallelize. The only way to know for certain is to measure.
If the CPU is the limiting factor parallelization should be done on the regexps:
cat regexp.txt | parallel --pipe -L1000 --round-robin grep -f - bigfileIf a line matches multiple regexps, the line may be duplicated. The command will start one grep per CPU and read bigfile one time per CPU, but as that is done in parallel, all reads except the first will be cached in RAM. Depending on the size of regexp.txt it may be faster to use --block 10m instead of -L1000. If regexp.txt is too big to fit in RAM, remove --round-robin and adjust -L1000. This will cause bigfile to be read more times.
Some storage systems perform better when reading multiple chunks in parallel. This is true for some RAID systems and for some network file systems. To parallelize the reading of bigfile:
parallel --pipepart --block 100M -a bigfile -k grep -f regexp.txtThis will split bigfile into 100MB chunks and run grep on each of these chunks. To parallelize both reading of bigfile and regexp.txt combine the two using --fifo:
parallel --pipepart --block 100M -a bigfile --fifo cat regexp.txt \
\| parallel --pipe -L1000 --round-robin grep -f - {}If a line matches multiple regexps, the line may be duplicated.
To run commands on a remote computer SSH needs to be set up and you must be able to login without entering a password (The commands ssh-copy-id, ssh-agent, and sshpass may help you do that).
If you need to login to a whole cluster, you typically do not want to accept the host key for every host. You want to accept them the first time and be warned if they are ever changed. To do that:
# Add the servers to the sshloginfile
(echo servera; echo serverb) > .parallel/my_cluster
# Make sure .ssh/config exist
touch .ssh/config
cp .ssh/config .ssh/config.backup
# Disable StrictHostKeyChecking temporarily
(echo 'Host *'; echo StrictHostKeyChecking no) >> .ssh/config
parallel --slf my_cluster --nonall true
# Remove the disabling of StrictHostKeyChecking
mv .ssh/config.backup .ssh/configThe servers in .parallel/my_cluster are now added in .ssh/known_hosts.
To run echo on server.example.com:
seq 10 | parallel --sshlogin server.example.com echoTo run commands on more than one remote computer run:
seq 10 | parallel --sshlogin server.example.com,server2.example.net echoOr:
seq 10 | parallel --sshlogin server.example.com \
--sshlogin server2.example.net echoIf the login username is foo on server2.example.net use:
seq 10 | parallel --sshlogin server.example.com \
--sshlogin foo@server2.example.net echoIf your list of hosts is server1-88.example.net with login foo:
seq 10 | parallel -Sfoo@server{1..88}.example.net echoTo distribute the commands to a list of computers, make a file mycomputers with all the computers:
server.example.com
foo@server2.example.com
server3.example.comThen run:
seq 10 | parallel --sshloginfile mycomputers echoTo include the local computer add the special sshlogin ':' to the list:
server.example.com
foo@server2.example.com
server3.example.com
:GNU parallel will try to determine the number of CPU cores on each of the remote computers, and run one job per CPU core - even if the remote computers do not have the same number of CPU cores.
If the number of CPU cores on the remote computers is not identified correctly the number of CPU cores can be added in front. Here the computer has 8 CPU cores.
seq 10 | parallel --sshlogin 8/server.example.com echoTo recompress gzipped files with bzip2 using a remote computer run:
find logs/ -name '*.gz' | \
parallel --sshlogin server.example.com \
--transfer "zcat {} | bzip2 -9 >{.}.bz2"This will list the .gz-files in the logs directory and all directories below. Then it will transfer the files to server.example.com to the corresponding directory in $HOME/logs. On server.example.com the file will be recompressed using zcat and bzip2 resulting in the corresponding file with .gz replaced with .bz2.
If you want the resulting bz2-file to be transferred back to the local computer add --return {.}.bz2:
find logs/ -name '*.gz' | \
parallel --sshlogin server.example.com \
--transfer --return {.}.bz2 "zcat {} | bzip2 -9 >{.}.bz2"After the recompressing is done the .bz2-file is transferred back to the local computer and put next to the original .gz-file.
If you want to delete the transferred files on the remote computer add --cleanup. This will remove both the file transferred to the remote computer and the files transferred from the remote computer:
find logs/ -name '*.gz' | \
parallel --sshlogin server.example.com \
--transfer --return {.}.bz2 --cleanup "zcat {} | bzip2 -9 >{.}.bz2"If you want run on several computers add the computers to --sshlogin either using ',' or multiple --sshlogin:
find logs/ -name '*.gz' | \
parallel --sshlogin server.example.com,server2.example.com \
--sshlogin server3.example.com \
--transfer --return {.}.bz2 --cleanup "zcat {} | bzip2 -9 >{.}.bz2"You can add the local computer using --sshlogin :. This will disable the removing and transferring for the local computer only:
find logs/ -name '*.gz' | \
parallel --sshlogin server.example.com,server2.example.com \
--sshlogin server3.example.com \
--sshlogin : \
--transfer --return {.}.bz2 --cleanup "zcat {} | bzip2 -9 >{.}.bz2"Often --transfer, --return and --cleanup are used together. They can be shortened to --trc:
find logs/ -name '*.gz' | \
parallel --sshlogin server.example.com,server2.example.com \
--sshlogin server3.example.com \
--sshlogin : \
--trc {.}.bz2 "zcat {} | bzip2 -9 >{.}.bz2"With the file mycomputers containing the list of computers it becomes:
find logs/ -name '*.gz' | parallel --sshloginfile mycomputers \
--trc {.}.bz2 "zcat {} | bzip2 -9 >{.}.bz2"If the file ~/.parallel/sshloginfile contains the list of computers the special short hand -S .. can be used:
find logs/ -name '*.gz' | parallel -S .. \
--trc {.}.bz2 "zcat {} | bzip2 -9 >{.}.bz2"Convert *.mp3 to *.ogg running one process per CPU core on local computer and server2:
parallel --trc {.}.ogg -S server2,: \
'mpg321 -w - {} | oggenc -q0 - -o {.}.ogg' ::: *.mp3To run the command uptime on remote computers you can do:
parallel --tag --nonall -S server1,server2 uptime--nonall reads no arguments. If you have a list of jobs you want run on each computer you can do:
parallel --tag --onall -S server1,server2 echo ::: 1 2 3Remove --tag if you do not want the sshlogin added before the output.
If you have a lot of hosts use '-j0' to access more hosts in parallel.
If the workers are behind a NAT wall, you need some trickery to get to them.
If you can ssh to a jump host, and reach the workers from there, then the obvious solution would be this, but it does not work:
parallel --ssh 'ssh jumphost ssh' -S host1 echo ::: DOES NOT WORKIt does not work because the command is dequoted by ssh twice where as GNU parallel only expects it to be dequoted once.
So instead put this in ~/.ssh/config:
Host host1 host2 host3
ProxyCommand ssh jumphost.domain nc -w 1 %h 22It requires nc(netcat) to be installed on jumphost. With this you can simply:
parallel -S host1,host2,host3 echo ::: This does workIf there is no jumphost but each server has port 22 forwarded from the firewall (e.g. the firewall's port 22001 = port 22 on host1, 22002 = host2, 22003 = host3) then you can use ~/.ssh/config:
Host host1.v
Port 22001
Host host2.v
Port 22002
Host host3.v
Port 22003
Host *.v
Hostname firewallAnd then use host{1..3}.v as normal hosts:
parallel -S host1.v,host2.v,host3.v echo ::: a b cIf ports cannot be forwarded, you need some sort of VPN to traverse the NAT-wall. TOR is one options for that, as it is very easy to get working.
You need to install TOR and setup a hidden service. In torrc put:
HiddenServiceDir /var/lib/tor/hidden_service/
HiddenServicePort 22 127.0.0.1:22Then start TOR: /etc/init.d/tor restart
The TOR hostname is now in /var/lib/tor/hidden_service/hostname and is something similar to izjafdceobowklhz.onion. Now you simply prepend torsocks to ssh:
parallel --ssh 'torsocks ssh' -S izjafdceobowklhz.onion \
-S zfcdaeiojoklbwhz.onion,auclucjzobowklhi.onion echo ::: a b cIf not all hosts are accessible through TOR:
parallel -S 'torsocks ssh izjafdceobowklhz.onion,host2,host3' echo ::: a b crsync is a great tool, but sometimes it will not fill up the available bandwidth. This is often a problem when copying several big files over high speed connections.
The following will start one rsync per big file in src-dir to dest-dir on the server fooserver:
cd src-dir; find . -type f -size +100000 | \
parallel -v ssh fooserver mkdir -p /dest-dir/{//}\; \
rsync -s -Havessh {} fooserver:/dest-dir/{}The dirs created may end up with wrong permissions and smaller files are not being transferred. To fix those run rsync a final time:
rsync -Havessh src-dir/ fooserver:/dest-dir/If you are unable to push data, but need to pull them and the files are called digits.png (e.g. 000000.png) you might be able to do:
seq -w 0 99 | parallel rsync -Havessh fooserver:src-path/*{}.png destdir/Copy files like foo.es.ext to foo.ext:
ls *.es.* | perl -pe 'print; s/\.es//' | parallel -N2 cp {1} {2}The perl command spits out 2 lines for each input. GNU parallel takes 2 inputs (using -N2) and replaces {1} and {2} with the inputs.
Count in binary:
parallel -k echo ::: 0 1 ::: 0 1 ::: 0 1 ::: 0 1 ::: 0 1 ::: 0 1Print the number on the opposing sides of a six sided die:
parallel --xapply -a <(seq 6) -a <(seq 6 -1 1) echo
parallel --xapply echo :::: <(seq 6) <(seq 6 -1 1)Convert files from all subdirs to PNG-files with consecutive numbers (useful for making input PNG's for ffmpeg):
parallel --xapply -a <(find . -type f | sort) \
-a <(seq $(find . -type f|wc -l)) convert {1} {2}.pngAlternative version:
find . -type f | sort | parallel convert {} {#}.pngContent of table_file.tsv:
foo<TAB>bar
baz <TAB> quuxTo run:
cmd -o bar -i foo
cmd -o quux -i bazyou can run:
parallel -a table_file.tsv --colsep '\t' cmd -o {2} -i {1}Note: The default for GNU parallel is to remove the spaces around the columns. To keep the spaces:
parallel -a table_file.tsv --trim n --colsep '\t' cmd -o {2} -i {1}If you want to run the same command with the same arguments 10 times in parallel you can do:
seq 10 | parallel -n0 my_command my_argsGNU parallel can work similar to cat | sh.
A resource inexpensive job is a job that takes very little CPU, disk I/O and network I/O. Ping is an example of a resource inexpensive job. wget is too - if the webpages are small.
The content of the file jobs_to_run:
ping -c 1 10.0.0.1
wget http://example.com/status.cgi?ip=10.0.0.1
ping -c 1 10.0.0.2
wget http://example.com/status.cgi?ip=10.0.0.2
...
ping -c 1 10.0.0.255
wget http://example.com/status.cgi?ip=10.0.0.255To run 100 processes simultaneously do:
parallel -j 100 < jobs_to_runAs there is not a command the jobs will be evaluated by the shell.
To process a big file or some output you can use --pipe to split up the data into blocks and pipe the blocks into the processing program.
If the program is gzip -9 you can do:
cat bigfile | parallel --pipe --recend '' -k gzip -9 > bigfile.gzThis will split bigfile into blocks of 1 MB and pass that to gzip -9 in parallel. One gzip will be run per CPU core. The output of gzip -9 will be kept in order and saved to bigfile.gz
gzip works fine if the output is appended, but some processing does not work like that - for example sorting. For this GNU parallel can put the output of each command into a file. This will sort a big file in parallel:
cat bigfile | parallel --pipe --files sort |\
parallel -Xj1 sort -m {} ';' rm {} >bigfile.sortHere bigfile is split into blocks of around 1MB, each block ending in '\n' (which is the default for --recend). Each block is passed to sort and the output from sort is saved into files. These files are passed to the second parallel that runs sort -m on the files before it removes the files. The output is saved to bigfile.sort.
GNU parallel's --pipe maxes out at around 100 MB/s because every byte has to be copied through GNU parallel. But if bigfile is a real (seekable) file GNU parallel can by-pass the copying and send the parts directly to the program:
parallel --pipepart --block 100m -a bigfile --files sort |\
parallel -Xj1 sort -m {} ';' rm {} >bigfile.sortIf you need to run a massive amount of jobs in parallel, then you will likely hit the filehandle limit which is often around 250 jobs. If you are super user you can raise the limit in /etc/security/limits.conf but you can also use this workaround. The filehandle limit is per process. That means that if you just spawn more GNU parallels then each of them can run 250 jobs. This will spawn up to 2500 jobs:
cat myinput |\
parallel --pipe -N 50 --round-robin -j50 parallel -j50 your_prgThis will spawn up to 62500 jobs (use with caution - you need 64 GB RAM to do this, and you may need to increase /proc/sys/kernel/pid_max):
cat myinput |\
parallel --pipe -N 250 --round-robin -j250 parallel -j250 your_prgThe command sem is an alias for parallel --semaphore.
A counting semaphore will allow a given number of jobs to be started in the background. When the number of jobs are running in the background, GNU sem will wait for one of these to complete before starting another command. sem --wait will wait for all jobs to complete.
Run 10 jobs concurrently in the background:
for i in *.log ; do
echo $i
sem -j10 gzip $i ";" echo done
done
sem --waitA mutex is a counting semaphore allowing only one job to run. This will edit the file myfile and prepends the file with lines with the numbers 1 to 3.
seq 3 | parallel sem sed -i -e 'i{}' myfileAs myfile can be very big it is important only one process edits the file at the same time.
Name the semaphore to have multiple different semaphores active at the same time:
seq 3 | parallel sem --id mymutex sed -i -e 'i{}' myfileAssume a script is called from cron or from a web service, but only one instance can be run at a time. With sem and --shebang-wrap the script can be made to wait for other instances to finish. Here in bash:
#!/usr/bin/sem --shebang-wrap -u --id $0 --fg /bin/bash
echo This will run
sleep 5
echo exclusivelyHere perl:
#!/usr/bin/sem --shebang-wrap -u --id $0 --fg /usr/bin/perl
print "This will run ";
sleep 5;
print "exclusively\n";Here python:
#!/usr/local/bin/sem --shebang-wrap -u --id $0 --fg /usr/bin/python
import time
print "This will run ";
time.sleep(5)
print "exclusively";You can use GNU parallel to start interactive programs like emacs or vi:
cat filelist | parallel --tty -X emacs
cat filelist | parallel --tty -X viIf there are more files than will fit on a single command line, the editor will be started again with the remaining files.
sudo requires a password to run a command as root. It caches the access, so you only need to enter the password again if you have not used sudo for a while.
The command:
parallel sudo echo ::: This is a bad ideais no good, as you would be prompted for the sudo password for each of the jobs. You can either do:
sudo echo This
parallel sudo echo ::: is a good ideaor:
sudo parallel echo ::: This is a good ideaThis way you only have to enter the sudo password once.
GNU parallel can work as a simple job queue system or batch manager. The idea is to put the jobs into a file and have GNU parallel read from that continuously. As GNU parallel will stop at end of file we use tail to continue reading:
true >jobqueue; tail -n+0 -f jobqueue | parallelTo submit your jobs to the queue:
echo my_command my_arg >> jobqueueYou can of course use -S to distribute the jobs to remote computers:
true >jobqueue; tail -n+0 -f jobqueue | parallel -S ..If you keep this running for a long time, jobqueue will grow. A way of removing the jobs already run is by making GNU parallel stop when it hits a special value and then restart. To use --eof to make GNU parallel exit, tail also needs to be forced to exit:
true >jobqueue;
while true; do
tail -n+0 -f jobqueue |
(parallel -E StOpHeRe -S ..; echo GNU Parallel is now done;
perl -e 'while(<>){/StOpHeRe/ and last};print <>' jobqueue > j2;
(seq 1000 >> jobqueue &);
echo Done appending dummy data forcing tail to exit)
echo tail exited;
mv j2 jobqueue
doneIn some cases you can run on more CPUs and computers during the night:
# Day time
echo 50% > jobfile
cp day_server_list ~/.parallel/sshloginfile
# Night time
echo 100% > jobfile
cp night_server_list ~/.parallel/sshloginfile
tail -n+0 -f jobqueue | parallel --jobs jobfile -S ..GNU Parallel discovers if jobfile or ~/.parallel/sshloginfile changes.
There is a a small issue when using GNU parallel as queue system/batch manager: You have to submit JobSlot number of jobs before they will start, and after that you can submit one at a time, and job will start immediately if free slots are available. Output from the running or completed jobs are held back and will only be printed when JobSlots more jobs has been started (unless you use --ungroup or -u, in which case the output from the jobs are printed immediately). E.g. if you have 10 jobslots then the output from the first completed job will only be printed when job 11 has started, and the output of second completed job will only be printed when job 12 has started.
If you have a dir in which users drop files that needs to be processed you can do this on GNU/Linux (If you know what inotifywait is called on other platforms file a bug report):
inotifywait -q -m -r -e MOVED_TO -e CLOSE_WRITE --format %w%f my_dir |\
parallel -u echoThis will run the command echo on each file put into my_dir or subdirs of my_dir.
You can of course use -S to distribute the jobs to remote computers:
inotifywait -q -m -r -e MOVED_TO -e CLOSE_WRITE --format %w%f my_dir |\
parallel -S .. -u echoIf the files to be processed are in a tar file then unpacking one file and processing it immediately may be faster than first unpacking all files. Set up the dir processor as above and unpack into the dir.
Using GNU Parallel as dir processor has the same limitations as using GNU Parallel as queue system/batch manager.
GNU parallel is very liberal in quoting. You only need to quote characters that have special meaning in shell:
( ) $ ` ' " < > ; | \and depending on context these needs to be quoted, too:
~ & # ! ? space * {Therefore most people will never need more quoting than putting '\' in front of the special characters.
Often you can simply put \' around every ':
perl -ne '/^\S+\s+\S+$/ and print $ARGV,"\n"' filecan be quoted:
parallel perl -ne \''/^\S+\s+\S+$/ and print $ARGV,"\n"'\' ::: fileHowever, when you want to use a shell variable you need to quote the $-sign. Here is an example using $PARALLEL_SEQ. This variable is set by GNU parallel itself, so the evaluation of the $ must be done by the sub shell started by GNU parallel:
seq 10 | parallel -N2 echo seq:\$PARALLEL_SEQ arg1:{1} arg2:{2}If the variable is set before GNU parallel starts you can do this:
VAR=this_is_set_before_starting
echo test | parallel echo {} $VARPrints: test this_is_set_before_starting
It is a little more tricky if the variable contains more than one space in a row:
VAR="two spaces between each word"
echo test | parallel echo {} \'"$VAR"\'Prints: test two spaces between each word
If the variable should not be evaluated by the shell starting GNU parallel but be evaluated by the sub shell started by GNU parallel, then you need to quote it:
echo test | parallel VAR=this_is_set_after_starting \; echo {} \$VARPrints: test this_is_set_after_starting
It is a little more tricky if the variable contains space:
echo test |\
parallel VAR='"two spaces between each word"' echo {} \'"$VAR"\'Prints: test two spaces between each word
$$ is the shell variable containing the process id of the shell. This will print the process id of the shell running GNU parallel:
seq 10 | parallel echo $$And this will print the process ids of the sub shells started by GNU parallel.
seq 10 | parallel echo \$\$If the special characters should not be evaluated by the sub shell then you need to protect it against evaluation from both the shell starting GNU parallel and the sub shell:
echo test | parallel echo {} \\\$VARPrints: test $VAR
GNU parallel can protect against evaluation by the sub shell by using -q:
echo test | parallel -q echo {} \$VARPrints: test $VAR
This is particularly useful if you have lots of quoting. If you want to run a perl script like this:
perl -ne '/^\S+\s+\S+$/ and print $ARGV,"\n"' fileIt needs to be quoted like one of these:
ls | parallel perl -ne '/^\\S+\\s+\\S+\$/\ and\ print\ \$ARGV,\"\\n\"'
ls | parallel perl -ne \''/^\S+\s+\S+$/ and print $ARGV,"\n"'\'Notice how spaces, \'s, "'s, and $'s need to be quoted. GNU parallel can do the quoting by using option -q:
ls | parallel -q perl -ne '/^\S+\s+\S+$/ and print $ARGV,"\n"'However, this means you cannot make the sub shell interpret special characters. For example because of -q this WILL NOT WORK:
ls *.gz | parallel -q "zcat {} >{.}"
ls *.gz | parallel -q "zcat {} | bzip2 >{.}.bz2"because > and | need to be interpreted by the sub shell.
If you get errors like:
sh: -c: line 0: syntax error near unexpected token
sh: Syntax error: Unterminated quoted string
sh: -c: line 0: unexpected EOF while looking for matching `''
sh: -c: line 1: syntax error: unexpected end of filethen you might try using -q.
If you are using bash process substitution like <(cat foo) then you may try -q and prepending command with bash -c:
ls | parallel -q bash -c 'wc -c <(echo {})'Or for substituting output:
ls | parallel -q bash -c \
'tar c {} | tee >(gzip >{}.tar.gz) | bzip2 >{}.tar.bz2'Conclusion: To avoid dealing with the quoting problems it may be easier just to write a small script or a function (remember to export -f the function) and have GNU parallel call that.
If you want a list of the jobs currently running you can run:
killall -USR1 parallelGNU parallel will then print the currently running jobs on stderr (standard error).
If you regret starting a lot of jobs you can simply break GNU parallel, but if you want to make sure you do not have half-completed jobs you should send the signal SIGTERM to GNU parallel:
killall -TERM parallelThis will tell GNU parallel to not start any new jobs, but wait until the currently running jobs are finished before exiting.
The environment variable $PARALLEL_PID is set by GNU parallel and is visible to the jobs started from GNU parallel. This makes it possible for the jobs to communicate directly to GNU parallel. Remember to quote the $, so it gets evaluated by the correct shell.
Example: If each of the jobs tests a solution and one of jobs finds the solution the job can tell GNU parallel not to start more jobs by: kill -TERM $PARALLEL_PID. This only works on the local computer.
Use this shell the shell for the commands run by GNU Parallel:
$PARALLEL_SHELL. If undefined use:
The shell that started GNU Parallel. If that cannot be determined:
$SHELL. If undefined use:
/bin/sh
GNU parallel defaults to using ssh for remote access. This can be overridden with $PARALLEL_SSH, which again can be overridden with --ssh. It can also be set on a per server basis (see --sshlogin).
$PARALLEL_SEQ will be set to the sequence number of the job running. Remember to quote the $, so it gets evaluated by the correct shell.
Example:
seq 10 | parallel -N2 \
echo seq:'$'PARALLEL_SEQ arg1:{1} arg2:{2}Directory for temporary files. See: --tmpdir.
The environment variable $PARALLEL will be used as default options for GNU parallel. If the variable contains special shell characters (e.g. $, *, or space) then these need to be to be escaped with \.
Example:
cat list | parallel -j1 -k -v ls
cat list | parallel -j1 -k -v -S"myssh user@server" lscan be written as:
cat list | PARALLEL="-kvj1" parallel ls
cat list | PARALLEL='-kvj1 -S myssh\ user@server' \
parallel echoNotice the \ in the middle is needed because 'myssh' and 'user@server' must be one argument.
The global configuration file /etc/parallel/config, followed by user configuration file ~/.parallel/config (formerly known as .parallelrc) will be read in turn if they exist. Lines starting with '#' will be ignored. The format can follow that of the environment variable $PARALLEL, but it is often easier to simply put each option on its own line.
Options on the command line take precedence, followed by the environment variable $PARALLEL, user configuration file ~/.parallel/config, and finally the global configuration file /etc/parallel/config.
Note that no file that is read for options, nor the environment variable $PARALLEL, may contain retired options such as --tollef.
If --profile set, GNU parallel will read the profile from that file rather than the global or user configuration files. You can have multiple --profiles.
Example: Profile for running a command on every sshlogin in ~/.ssh/sshlogins and prepend the output with the sshlogin:
echo --tag -S .. --nonall > ~/.parallel/n
parallel -Jn uptimeExample: Profile for running every command with -j-1 and nice
echo -j-1 nice > ~/.parallel/nice_profile
parallel -J nice_profile bzip2 -9 ::: *Example: Profile for running a perl script before every command:
echo "perl -e '\$a=\$\$; print \$a,\" \",'\$PARALLEL_SEQ',\" \";';" \
> ~/.parallel/pre_perl
parallel -J pre_perl echo ::: *Note how the $ and " need to be quoted using \.
Example: Profile for running distributed jobs with nice on the remote computers:
echo -S .. nice > ~/.parallel/dist
parallel -J dist --trc {.}.bz2 bzip2 -9 ::: *Exit status depends on --halt-on-error if one of these are used: success=X, success=Y%, fail=Y%.
All jobs ran without error. If success=X is used: X jobs ran without error. If success=Y% is used: Y% of the jobs ran without error.
Some of the jobs failed. The exit status gives the number of failed jobs. If Y% is used the exit status is the percentage of jobs that failed.
More than 100 jobs failed.
Other error.
Killed by Ctrl-C, timeout, not enough memory or similar.
$job->skip() was called in {= =}.
Job is ready to run (set by --sqlmaster).
Job is taken by worker (set by --sqlworker).
If fail=1 is used, the exit status will be the exit status of the failing job.
There are a lot programs with some of the functionality of GNU parallel. GNU parallel strives to include the best of the functionality without sacrificing ease of use.
The following features are in some of the comparable tools:
Inputs I1. Arguments can be read from stdin I2. Arguments can be read from a file I3. Arguments can be read from multiple files I4. Arguments can be read from command line I5. Arguments can be read from a table I6. Arguments can be read from the same file using #! (shebang) I7. Line oriented input as default (Quoting of special chars not needed)
Manipulation of input M1. Composed command M2. Multiple arguments can fill up an execution line M3. Arguments can be put anywhere in the execution line M4. Multiple arguments can be put anywhere in the execution line M5. Arguments can be replaced with context M6. Input can be treated as the complete command line
Outputs O1. Grouping output so output from different jobs do not mix O2. Send stderr (standard error) to stderr (standard error) O3. Send stdout (standard output) to stdout (standard output) O4. Order of output can be same as order of input O5. Stdout only contains stdout (standard output) from the command O6. Stderr only contains stderr (standard error) from the command
Execution E1. Running jobs in parallel E2. List running jobs E3. Finish running jobs, but do not start new jobs E4. Number of running jobs can depend on number of cpus E5. Finish running jobs, but do not start new jobs after first failure E6. Number of running jobs can be adjusted while running
Remote execution R1. Jobs can be run on remote computers R2. Basefiles can be transferred R3. Argument files can be transferred R4. Result files can be transferred R5. Cleanup of transferred files R6. No config files needed R7. Do not run more than SSHD's MaxStartups can handle R8. Configurable SSH command R9. Retry if connection breaks occasionally
Semaphore S1. Possibility to work as a mutex S2. Possibility to work as a counting semaphore
Legend - = no x = not applicable ID = yes
As every new version of the programs are not tested the table may be outdated. Please file a bug-report if you find errors (See REPORTING BUGS).
parallel: I1 I2 I3 I4 I5 I6 I7 M1 M2 M3 M4 M5 M6 O1 O2 O3 O4 O5 O6 E1 E2 E3 E4 E5 E6 R1 R2 R3 R4 R5 R6 R7 R8 R9 S1 S2
xargs: I1 I2 - - - - - - M2 M3 - - - - O2 O3 - O5 O6 E1 - - - - - - - - - - x - - - - -
find -exec: - - - x - x - - M2 M3 - - - - - O2 O3 O4 O5 O6 - - - - - - - - - - - - - - - - x x
make -j: - - - - - - - - - - - - - O1 O2 O3 - x O6 E1 - - - E5 - - - - - - - - - - - -
ppss: I1 I2 - - - - I7 M1 - M3 - - M6 O1 - - x - - E1 E2 ?E3 E4 - - R1 R2 R3 R4 - - ?R7 ? ? - -
pexec: I1 I2 - I4 I5 - - M1 - M3 - - M6 O1 O2 O3 - O5 O6 E1 - - E4 - E6 R1 - - - - R6 - - - S1 -
xjobs: TODO - Please file a bug-report if you know what features xjobs supports (See REPORTING BUGS).
prll: TODO - Please file a bug-report if you know what features prll supports (See REPORTING BUGS).
dxargs: TODO - Please file a bug-report if you know what features dxargs supports (See REPORTING BUGS).
mdm/middelman: TODO - Please file a bug-report if you know what features mdm/middelman supports (See REPORTING BUGS).
xapply: TODO - Please file a bug-report if you know what features xapply supports (See REPORTING BUGS).
paexec: TODO - Please file a bug-report if you know what features paexec supports (See REPORTING BUGS).
ladon: TODO - Please file a bug-report if you know what features ladon supports (See REPORTING BUGS).
ClusterSSH: TODO - Please file a bug-report if you know what features ClusterSSH supports (See REPORTING BUGS).
xargs offers some of the same possibilities as GNU parallel.
xargs deals badly with special characters (such as space, \, ' and "). To see the problem try this:
touch important_file
touch 'not important_file'
ls not* | xargs rm
mkdir -p "My brother's 12\" records"
ls | xargs rmdir
touch 'c:\windows\system32\clfs.sys'
echo 'c:\windows\system32\clfs.sys' | xargs ls -lYou can specify -0, but many input generators are not optimized for using NUL as separator but are optimized for newline as separator. E.g head, tail, awk, ls, echo, sed, tar -v, perl (-0 and \0 instead of \n), locate (requires using -0), find (requires using -print0), grep (requires user to use -z or -Z), sort (requires using -z).
GNU parallel's newline separation can be emulated with:
cat | xargs -d "\n" -n1 command
xargs can run a given number of jobs in parallel, but has no support for running number-of-cpu-cores jobs in parallel.
xargs has no support for grouping the output, therefore output may run together, e.g. the first half of a line is from one process and the last half of the line is from another process. The example Parallel grep cannot be done reliably with xargs because of this. To see this in action try:
parallel perl -e '\$a=\"1{}\"x10000000\;print\ \$a,\"\\n\"' '>' {} \
::: a b c d e f
ls -l a b c d e f
parallel -kP4 -n1 grep 1 > out.par ::: a b c d e f
echo a b c d e f | xargs -P4 -n1 grep 1 > out.xargs-unbuf
echo a b c d e f | \
xargs -P4 -n1 grep --line-buffered 1 > out.xargs-linebuf
echo a b c d e f | xargs -n1 grep 1 > out.xargs-serial
ls -l out*
md5sum out*xargs has no support for keeping the order of the output, therefore if running jobs in parallel using xargs the output of the second job cannot be postponed till the first job is done.
xargs has no support for running jobs on remote computers.
xargs has no support for context replace, so you will have to create the arguments.
If you use a replace string in xargs (-I) you can not force xargs to use more than one argument.
Quoting in xargs works like -q in GNU parallel. This means composed commands and redirection require using bash -c.
ls | parallel "wc {} >{}.wc"
ls | parallel "echo {}; ls {}|wc"becomes (assuming you have 8 cores)
ls | xargs -d "\n" -P8 -I {} bash -c "wc {} >{}.wc"
ls | xargs -d "\n" -P8 -I {} bash -c "echo {}; ls {}|wc"find -exec offer some of the same possibilities as GNU parallel.
find -exec only works on files. So processing other input (such as hosts or URLs) will require creating these inputs as files. find -exec has no support for running commands in parallel.
make -j can run jobs in parallel, but requires a crafted Makefile to do this. That results in extra quoting to get filename containing newline to work correctly.
make -j computes a dependency graph before running jobs. Jobs run by GNU parallel does not depend on eachother.
(Very early versions of GNU parallel were coincidently implemented using make -j).
ppss is also a tool for running jobs in parallel.
The output of ppss is status information and thus not useful for using as input for another command. The output from the jobs are put into files.
The argument replace string ($ITEM) cannot be changed. Arguments must be quoted - thus arguments containing special characters (space '"&!*) may cause problems. More than one argument is not supported. File names containing newlines are not processed correctly. When reading input from a file null cannot be used as a terminator. ppss needs to read the whole input file before starting any jobs.
Output and status information is stored in ppss_dir and thus requires cleanup when completed. If the dir is not removed before running ppss again it may cause nothing to happen as ppss thinks the task is already done. GNU parallel will normally not need cleaning up if running locally and will only need cleaning up if stopped abnormally and running remote (--cleanup may not complete if stopped abnormally). The example Parallel grep would require extra postprocessing if written using ppss.
For remote systems PPSS requires 3 steps: config, deploy, and start. GNU parallel only requires one step.
Here are the examples from ppss's manual page with the equivalent using GNU parallel:
1 ./ppss.sh standalone -d /path/to/files -c 'gzip '
1 find /path/to/files -type f | parallel gzip
2 ./ppss.sh standalone -d /path/to/files -c 'cp "$ITEM" /destination/dir '
2 find /path/to/files -type f | parallel cp {} /destination/dir
3 ./ppss.sh standalone -f list-of-urls.txt -c 'wget -q '
3 parallel -a list-of-urls.txt wget -q
4 ./ppss.sh standalone -f list-of-urls.txt -c 'wget -q "$ITEM"'
4 parallel -a list-of-urls.txt wget -q {}
5 ./ppss config -C config.cfg -c 'encode.sh ' -d /source/dir -m 192.168.1.100 -u ppss -k ppss-key.key -S ./encode.sh -n nodes.txt -o /some/output/dir --upload --download ; ./ppss deploy -C config.cfg ; ./ppss start -C config
5 # parallel does not use configs. If you want a different username put it in nodes.txt: user@hostname
5 find source/dir -type f | parallel --sshloginfile nodes.txt --trc {.}.mp3 lame -a {} -o {.}.mp3 --preset standard --quiet
6 ./ppss stop -C config.cfg
6 killall -TERM parallel
7 ./ppss pause -C config.cfg
7 Press: CTRL-Z or killall -SIGTSTP parallel
8 ./ppss continue -C config.cfg
8 Enter: fg or killall -SIGCONT parallel
9 ./ppss.sh status -C config.cfg
9 killall -SIGUSR2 parallel
pexec is also a tool for running jobs in parallel.
Here are the examples from pexec's info page with the equivalent using GNU parallel:
1 pexec -o sqrt-%s.dat -p "$(seq 10)" -e NUM -n 4 -c -- \ 'echo "scale=10000;sqrt($NUM)" | bc'
1 seq 10 | parallel -j4 'echo "scale=10000;sqrt({})" | bc > sqrt-{}.dat'
2 pexec -p "$(ls myfiles*.ext)" -i %s -o %s.sort -- sort
2 ls myfiles*.ext | parallel sort {} ">{}.sort"
3 pexec -f image.list -n auto -e B -u star.log -c -- \ 'fistar $B.fits -f 100 -F id,x,y,flux -o $B.star'
3 parallel -a image.list \ 'fistar {}.fits -f 100 -F id,x,y,flux -o {}.star' 2>star.log
4 pexec -r *.png -e IMG -c -o - -- \ 'convert $IMG ${IMG%.png}.jpeg ; "echo $IMG: done"'
4 ls *.png | parallel 'convert {} {.}.jpeg; echo {}: done'
5 pexec -r *.png -i %s -o %s.jpg -c 'pngtopnm | pnmtojpeg'
5 ls *.png | parallel 'pngtopnm < {} | pnmtojpeg > {}.jpg'
6 for p in *.png ; do echo ${p%.png} ; done | \ pexec -f - -i %s.png -o %s.jpg -c 'pngtopnm | pnmtojpeg'
6 ls *.png | parallel 'pngtopnm < {} | pnmtojpeg > {.}.jpg'
7 LIST=$(for p in *.png ; do echo ${p%.png} ; done) pexec -r $LIST -i %s.png -o %s.jpg -c 'pngtopnm | pnmtojpeg'
7 ls *.png | parallel 'pngtopnm < {} | pnmtojpeg > {.}.jpg'
8 pexec -n 8 -r *.jpg -y unix -e IMG -c \ 'pexec -j -m blockread -d $IMG | \ jpegtopnm | pnmscale 0.5 | pnmtojpeg | \ pexec -j -m blockwrite -s th_$IMG'
8 Combining GNU parallel and GNU sem.
8 ls *jpg | parallel -j8 'sem --id blockread cat {} | jpegtopnm |' \ 'pnmscale 0.5 | pnmtojpeg | sem --id blockwrite cat > th_{}'
8 If reading and writing is done to the same disk, this may be faster as only one process will be either reading or writing:
8 ls *jpg | parallel -j8 'sem --id diskio cat {} | jpegtopnm |' \ 'pnmscale 0.5 | pnmtojpeg | sem --id diskio cat > th_{}'
xjobs is also a tool for running jobs in parallel. It only supports running jobs on your local computer.
xjobs deals badly with special characters just like xargs. See the section DIFFERENCES BETWEEN xargs AND GNU Parallel.
Here are the examples from xjobs's man page with the equivalent using GNU parallel:
1 ls -1 *.zip | xjobs unzip
1 ls *.zip | parallel unzip
2 ls -1 *.zip | xjobs -n unzip
2 ls *.zip | parallel unzip >/dev/null
3 find . -name '*.bak' | xjobs gzip
3 find . -name '*.bak' | parallel gzip
4 ls -1 *.jar | sed 's/\(.*\)/\1 > \1.idx/' | xjobs jar tf
4 ls *.jar | parallel jar tf {} '>' {}.idx
5 xjobs -s script
5 cat script | parallel
6 mkfifo /var/run/my_named_pipe; xjobs -s /var/run/my_named_pipe & echo unzip 1.zip >> /var/run/my_named_pipe; echo tar cf /backup/myhome.tar /home/me >> /var/run/my_named_pipe
6 mkfifo /var/run/my_named_pipe; cat /var/run/my_named_pipe | parallel & echo unzip 1.zip >> /var/run/my_named_pipe; echo tar cf /backup/myhome.tar /home/me >> /var/run/my_named_pipe
prll is also a tool for running jobs in parallel. It does not support running jobs on remote computers.
prll encourages using BASH aliases and BASH functions instead of scripts. GNU parallel supports scripts directly, functions if they are exported using export -f, and aliases if using env_parallel described earlier.
prll generates a lot of status information on stderr (standard error) which makes it harder to use the stderr (standard error) output of the job directly as input for another program.
Here is the example from prll's man page with the equivalent using GNU parallel:
prll -s 'mogrify -flip $1' *.jpg
parallel mogrify -flip ::: *.jpgdxargs is also a tool for running jobs in parallel.
dxargs does not deal well with more simultaneous jobs than SSHD's MaxStartups. dxargs is only built for remote run jobs, but does not support transferring of files.
middleman(mdm) is also a tool for running jobs in parallel.
Here are the shellscripts of http://mdm.berlios.de/usage.html ported to GNU parallel:
seq 19 | parallel buffon -o - | sort -n > result
cat files | parallel cmd
find dir -execdir sem cmd {} \;xapply can run jobs in parallel on the local computer.
Here are the examples from xapply's man page with the equivalent using GNU parallel:
1 xapply '(cd %1 && make all)' */
1 parallel 'cd {} && make all' ::: */
2 xapply -f 'diff %1 ../version5/%1' manifest | more
2 parallel diff {} ../version5/{} < manifest | more
3 xapply -p/dev/null -f 'diff %1 %2' manifest1 checklist1
3 parallel --xapply diff {1} {2} :::: manifest1 checklist1
4 xapply 'indent' *.c
4 parallel indent ::: *.c
5 find ~ksb/bin -type f ! -perm -111 -print | xapply -f -v 'chmod a+x' -
5 find ~ksb/bin -type f ! -perm -111 -print | parallel -v chmod a+x
6 find */ -... | fmt 960 1024 | xapply -f -i /dev/tty 'vi' -
6 sh <(find */ -... | parallel -s 1024 echo vi)
6 find */ -... | parallel -s 1024 -Xuj1 vi
7 find ... | xapply -f -5 -i /dev/tty 'vi' - - - - -
7 sh <(find ... |parallel -n5 echo vi)
7 find ... |parallel -n5 -uj1 vi
8 xapply -fn "" /etc/passwd
8 parallel -k echo < /etc/passwd
9 tr ':' '\012' < /etc/passwd | xapply -7 -nf 'chown %1 %6' - - - - - - -
9 tr ':' '\012' < /etc/passwd | parallel -N7 chown {1} {6}
10 xapply '[ -d %1/RCS ] || echo %1' */
10 parallel '[ -d {}/RCS ] || echo {}' ::: */
11 xapply -f '[ -f %1 ] && echo %1' List | ...
11 parallel '[ -f {} ] && echo {}' < List | ...
apply can build command lines based on a template and arguments - very much like GNU parallel. apply does not run jobs in parallel. apply does not use an argument separator (like :::); instead the template must be the first argument.
Here are the examples from https://www-01.ibm.com/support/knowledgecenter/ssw_aix_71/com.ibm.aix.cmds1/apply.htm
1. To obtain results similar to those of the ls command, enter:
apply echo *
parallel echo ::: *2. To compare the file named a1 to the file named b1, and the file named a2 to the file named b2, enter:
apply -2 cmp a1 b1 a2 b2
parallel -N2 cmp ::: a1 b1 a2 b23. To run the who command five times, enter:
apply -0 who 1 2 3 4 5
parallel -N0 who ::: 1 2 3 4 54. To link all files in the current directory to the directory /usr/joe, enter:
apply 'ln %1 /usr/joe' *
parallel ln {} /usr/joe ::: *paexec can run jobs in parallel on both the local and remote computers.
paexec requires commands to print a blank line as the last output. This means you will have to write a wrapper for most programs.
paexec has a job dependency facility so a job can depend on another job to be executed successfully. Sort of a poor-man's make.
Here are the examples from paexec's example catalog with the equivalent using GNU parallel:
../../paexec -s -l -c "`pwd`/1_div_X_cmd" -n +1 <<EOF [...]
parallel echo {} '|' `pwd`/1_div_X_cmd <<EOF [...] ../../paexec -lp -c "`pwd`/all_substr_cmd" -n +3 <<EOF [...]
parallel echo {} '|' `pwd`/all_substr_cmd <<EOF [...] ../../paexec -c "env CC=gcc CFLAGS=-O2 `pwd`/cc_wrapper_cmd" \
-n 'host1 host2' \
-t '/usr/bin/ssh -x' <<EOF [...]
parallel echo {} '|' "env CC=gcc CFLAGS=-O2 `pwd`/cc_wrapper_cmd" \
-S host1,host2 <<EOF [...]
# This is not exactly the same, but avoids the wrapper
parallel gcc -O2 -c -o {.}.o {} \
-S host1,host2 <<EOF [...] ../../paexec -lp -c "`pwd`/toupper_cmd" -n +10 <<EOF [...]
parallel echo {} '|' ./toupper_cmd <<EOF [...]
# Without the wrapper:
parallel echo {} '| awk {print\ toupper\(\$0\)}' <<EOF [...]map sees it as a feature to have less features and in doing so it also handles corner cases incorrectly. A lot of GNU parallel's code is to handle corner cases correctly on every platform, so you will not get a nasty surprise if a user for example saves a file called: My brother's 12" records.txt
map's example showing how to deal with special characters fails on special characters:
echo "The Cure" > My\ brother\'s\ 12\"\ records
ls | \
map 'echo -n `gzip < "%" | wc -c`; echo -n '*100/'; wc -c < "%"' | bcIt works with GNU parallel:
ls | \
parallel 'echo -n `gzip < {} | wc -c`; echo -n '*100/'; wc -c < {}' | bcAnd you can even get the file name prepended:
ls | \
parallel --tag '(echo -n `gzip < {} | wc -c`'*100/'; wc -c < {}) | bc'map has no support for grouping. So this gives the wrong results without any warnings:
parallel perl -e '\$a=\"1{}\"x10000000\;print\ \$a,\"\\n\"' '>' {} \
::: a b c d e f
ls -l a b c d e f
parallel -kP4 -n1 grep 1 > out.par ::: a b c d e f
map -p 4 'grep 1' a b c d e f > out.map-unbuf
map -p 4 'grep --line-buffered 1' a b c d e f > out.map-linebuf
map -p 1 'grep --line-buffered 1' a b c d e f > out.map-serial
ls -l out*
md5sum out*The documentation shows a workaround, but not only does that mix stdout (standard output) with stderr (standard error) it also fails completely for certain jobs (and may even be considered less readable):
parallel echo -n {} ::: 1 2 3
map -p 4 'echo -n % 2>&1 | sed -e "s/^/$$:/"' 1 2 3 | sort | cut -f2- -d:maps replacement strings (% %D %B %E) can be simulated in GNU parallel by putting this in ~/.parallel/config:
--rpl '%'
--rpl '%D $_=::shell_quote(::dirname($_));'
--rpl '%B s:.*/::;s:\.[^/.]+$::;'
--rpl '%E s:.*\.::'map cannot handle bundled options: map -vp 0 echo this fails
map does not have an argument separator on the command line, but uses the first argument as command. This makes quoting harder which again may affect readability. Compare:
map -p 2 perl\\\ -ne\\\ \\\'/^\\\\S+\\\\s+\\\\S+\\\$/\\\ and\\\ print\\\ \\\$ARGV,\\\"\\\\n\\\"\\\' *
parallel -q perl -ne '/^\S+\s+\S+$/ and print $ARGV,"\n"' ::: *map can do multiple arguments with context replace, but not without context replace:
parallel --xargs echo 'BEGIN{'{}'}END' ::: 1 2 3map does not set exit value according to whether one of the jobs failed:
parallel false ::: 1 || echo Job failed
map false 1 || echo Never runmap requires Perl v5.10.0 making it harder to use on old systems.
map has no way of using % in the command (GNU Parallel has -I to specify another replacement string than {}).
By design map is option incompatible with xargs, it does not have remote job execution, a structured way of saving results, multiple input sources, progress indicator, configurable record delimiter (only field delimiter), logging of jobs run with possibility to resume, keeping the output in the same order as input, --pipe processing, and dynamically timeouts.
ladon can run multiple jobs on files in parallel.
ladon only works on files and the only way to specify files is using a quoted glob string (such as \*.jpg). It is not possible to list the files manually.
As replacement strings it uses FULLPATH DIRNAME BASENAME EXT RELDIR RELPATH
These can be simulated using GNU parallel by putting this in ~/.parallel/config:
--rpl 'FULLPATH $_=::shell_quote($_);chomp($_=qx{readlink -f $_});'
--rpl 'DIRNAME $_=::shell_quote(::dirname($_));chomp($_=qx{readlink -f $_});'
--rpl 'BASENAME s:.*/::;s:\.[^/.]+$::;'
--rpl 'EXT s:.*\.::'
--rpl 'RELDIR $_=::shell_quote($_);chomp(($_,$c)=qx{readlink -f $_;pwd});s:\Q$c/\E::;$_=::dirname($_);'
--rpl 'RELPATH $_=::shell_quote($_);chomp(($_,$c)=qx{readlink -f $_;pwd});s:\Q$c/\E::;'ladon deals badly with filenames containing " and newline, and it fails for output larger than 200k:
ladon '*' -- seq 36000 | wcIt is assumed that the '--rpl's above are put in ~/.parallel/config and that it is run under a shell that supports '**' globbing (such as zsh):
1 ladon "**/*.txt" -- echo RELPATH
1 parallel echo RELPATH ::: **/*.txt
2 ladon "~/Documents/**/*.pdf" -- shasum FULLPATH >hashes.txt
2 parallel shasum FULLPATH ::: ~/Documents/**/*.pdf >hashes.txt
3 ladon -m thumbs/RELDIR "**/*.jpg" -- convert FULLPATH -thumbnail 100x100^ -gravity center -extent 100x100 thumbs/RELPATH
3 parallel mkdir -p thumbs/RELDIR\; convert FULLPATH -thumbnail 100x100^ -gravity center -extent 100x100 thumbs/RELPATH ::: **/*.jpg
4 ladon "~/Music/*.wav" -- lame -V 2 FULLPATH DIRNAME/BASENAME.mp3
4 parallel lame -V 2 FULLPATH DIRNAME/BASENAME.mp3 ::: ~/Music/*.wav
ClusterSSH solves a different problem than GNU parallel.
ClusterSSH opens a terminal window for each computer and using a master window you can run the same command on all the computers. This is typically used for administrating several computers that are almost identical.
GNU parallel runs the same (or different) commands with different arguments in parallel possibly using remote computers to help computing. If more than one computer is listed in -S GNU parallel may only use one of these (e.g. if there are 8 jobs to be run and one computer has 8 cores).
GNU parallel can be used as a poor-man's version of ClusterSSH:
parallel --nonall -S server-a,server-b do_stuff foo bar
Because of the way newline is quoted this will not work:
echo 1,2,3 | parallel -vkd, "echo 'a{}b'"However, these will all work:
echo 1,2,3 | parallel -vkd, echo a{}b
echo 1,2,3 | parallel -vkd, "echo 'a'{}'b'"
echo 1,2,3 | parallel -vkd, "echo 'a'"{}"'b'"GNU parallel is slow at starting up - around 250 ms the first time and 150 ms after that.
Starting a job on the local machine takes around 10 ms. This can be a big overhead if the job takes very few ms to run. Often you can group small jobs together using -X which will make the overhead less significant. Or you can run multiple GNU parallels as described in EXAMPLE: Speeding up fast jobs.
When using multiple computers GNU parallel opens ssh connections to them to figure out how many connections can be used reliably simultaneously (Namely SSHD's MaxStartups). This test is done for each host in serial, so if your --sshloginfile contains many hosts it may be slow.
If your jobs are short you may see that there are fewer jobs running on the remove systems than expected. This is due to time spent logging in and out. -M may help here.
A single disk can normally read data faster if it reads one file at a time instead of reading a lot of files in parallel, as this will avoid disk seeks. However, newer disk systems with multiple drives can read faster if reading from multiple files in parallel.
If the jobs are of the form read-all-compute-all-write-all, so everything is read before anything is written, it may be faster to force only one disk access at the time:
sem --id diskio cat file | compute | sem --id diskio cat > fileIf the jobs are of the form read-compute-write, so writing starts before all reading is done, it may be faster to force only one reader and writer at the time:
sem --id read cat file | compute | sem --id write cat > fileIf the jobs are of the form read-compute-read-compute, it may be faster to run more jobs in parallel than the system has CPUs, as some of the jobs will be stuck waiting for disk access.
The current implementation of --nice is too pessimistic in the max allowed command length. It only uses a little more than half of what it could. This affects -X and -m. If this becomes a real problem for you file a bug-report.
If you get:
Can't exec "command": No such file or directoryor:
open3: exec of by command failedit may be because command is not known, but it could also be because command is an alias or a function. If it is a function you need to export -f the function first. An alias will only work if you use env_parallel described earlier.
Report bugs to <bug-parallel@gnu.org> or https://savannah.gnu.org/bugs/?func=additem&group=parallel
See a perfect bug report on https://lists.gnu.org/archive/html/bug-parallel/2015-01/msg00000.html
Your bug report should always include:
The error message you get (if any).
The complete output of parallel --version. If you are not running the latest released version (see http://ftp.gnu.org/gnu/parallel/) you should specify why you believe the problem is not fixed in that version.
A minimal, complete, and verifiable example (See description on http://stackoverflow.com/help/mcve).
It should be a complete example that others can run that shows the problem including all files needed to run the example. This should preferably be small and simple, so try to remove as many options as possible. A combination of yes, seq, cat, echo, and sleep can reproduce most errors. If your example requires large files, see if you can make them by something like seq 1000000 > file or yes | head -n 10000000 > file. If your example requires remote execution, see if you can use localhost - maybe using another login.
The output of your example. If your problem is not easily reproduced by others, the output might help them figure out the problem.
Whether you have watched the intro videos (http://www.youtube.com/playlist?list=PL284C9FF2488BC6D1), walked through the tutorial (man parallel_tutorial), and read the EXAMPLE section in the man page (man parallel - search for EXAMPLE:).
If you suspect the error is dependent on your environment or distribution, please see if you can reproduce the error on one of these VirtualBox images: http://sourceforge.net/projects/virtualboximage/files/
Specifying the name of your distribution is not enough as you may have installed software that is not in the VirtualBox images.
If you cannot reproduce the error on any of the VirtualBox images above, see if you can build a VirtualBox image on which you can reproduce the error. If not you should assume the debugging will be done through you. That will put more burden on you and it is extra important you give any information that help. In general the problem will be fixed faster and with less work for you if you can reproduce the error on a VirtualBox.
When using GNU parallel for a publication please cite:
O. Tange (2011): GNU Parallel - The Command-Line Power Tool, ;login: The USENIX Magazine, February 2011:42-47.
This helps funding further development; and it won't cost you a cent. If you pay 10000 EUR you should feel free to use GNU Parallel without citing.
Copyright (C) 2007-10-18 Ole Tange, http://ole.tange.dk
Copyright (C) 2008,2009,2010 Ole Tange, http://ole.tange.dk
Copyright (C) 2010,2011,2012,2013,2014,2015,2016 Ole Tange, http://ole.tange.dk and Free Software Foundation, Inc.
Parts of the manual concerning xargs compatibility is inspired by the manual of xargs from GNU findutils 4.4.2.
Copyright (C) 2007,2008,2009,2010,2011,2012,2013,2014,2015,2016 Free Software Foundation, Inc.
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or at your option any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>.
Permission is granted to copy, distribute and/or modify this documentation under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, with no Front-Cover Texts, and with no Back-Cover Texts. A copy of the license is included in the file fdl.txt.
You are free:
to copy, distribute and transmit the work
to adapt the work
Under the following conditions:
You must attribute the work in the manner specified by the author or licensor (but not in any way that suggests that they endorse you or your use of the work).
If you alter, transform, or build upon this work, you may distribute the resulting work only under the same, similar or a compatible license.
With the understanding that:
Any of the above conditions can be waived if you get permission from the copyright holder.
Where the work or any of its elements is in the public domain under applicable law, that status is in no way affected by the license.
In no way are any of the following rights affected by the license:
Your fair dealing or fair use rights, or other applicable copyright exceptions and limitations;
The author's moral rights;
Rights other persons may have either in the work itself or in how the work is used, such as publicity or privacy rights.
For any reuse or distribution, you must make clear to others the license terms of this work.
A copy of the full license is included in the file as cc-by-sa.txt.
GNU parallel uses Perl, and the Perl modules Getopt::Long, IPC::Open3, Symbol, IO::File, POSIX, and File::Temp. For remote usage it also uses rsync with ssh.
ssh(1), rsync(1), find(1), xargs(1), dirname(1), make(1), pexec(1), ppss(1), xjobs(1), prll(1), dxargs(1), mdm(1)