[[ accessorsfileFormat and dateFormat options
to addRecordings to allow for easier ways to deal with file
formats I don’t know about-Bug fix for bindStudies when duplicate event names are
detected it wouldnt check that the new candidate name already existed,
so it could create more unknown duplicates
Bug fixes for calculateAverageSpectra - returning
safely with all-NA events instead of erroring
Added snrVals output to
calculateAverageSpectra
Big with all 0 wav clips in calculateAverageSpectra
causing errors
Oops changing fix so that only non-noise clips with all 0 get dropped
addRecordingsupdateFiles paths in some edge
casesfuture
package frameworkAdding runIciReview function and better
functionality for runDepthReview
Finally adding default option to
PAMpalSettings and addFunction to just use all
defaults (mostly for my convenience when testing and the values dont
matter)
calculateEchoDepthmode='fixed' option to
processPgDetections that lets users create fixed time
length events, processing all data similar to
mode='recording' but organizing into uniform time
chunksplotDataExplorer to use shiny
instead of manipulate since the manipulate version stopped
working a long time agoaddWaveHeight, calculateEchoDepth,
filterEchoDepths, and runDepthReviewDropping stringr dependency
Adding CSV option for addHydrophoneDepth
Bugfix for addNotes
Added fillZeroes option to
getClipData
plotGram works with gaps in data
Adding cmap options to plotGram and
calculateAverageSpectra
Adding various image control options to
plotGram
Updated filter to work more consistently with
complicated queries
Added check for processing mode='time' where it
would previously crash if $db was a folder, not a
file
calculateAverageSpectra was not properly scaling the
power spectrum, giving values ~50 dB higher than it shouldexport_annomate bugged file writing\(c)
usage in matchTimeDataaddSettingsaddRecordingsProbably about time this was 1.0.0, just in time for a paper!
Updating front page readme
NA valuesaddMeasures and getMeasures
functionstimeJoin from matchTimeData so
other packages can usegrouping='clickTrain' when processing with
mode='db'. Events have prefix CT instead of OE or DGL. By
default mode='db' will process all three of
grouping=c('event', 'detGroup', 'clickTrain')sampleDetector function to subsample by
detectoraddFPOD and getFPODData functions
to deal with adding/getting FPOD data from AcousticStudiesUpdating getClipData and
writeEventClips to have a fixLength option
that allows users to create clips of a fixed length using just the
buffer argument
Allowing processPgDetections to take multiple
label arguments to specify different table columns if using
both DG and OE events in same db
Updating markAnnotated to give warnings on NA values
instead of failing
Updating roccaWhistleCalcs to avoid divide by zero
NA/Inf values
markAnnotated function to flag whether or not
detections are within annotation boxesAdding matchTimeData function to add arbitrary data
to AcousticStudies
Bug fixes for some random stuff
Updated to warnings in addGps to now be less
overwhelming
Fixed bug for displaying some notes after combining with
bindStudies
addGps now adds gpsUncertainty which
says how many meters since to the closest GPS point. Useful to catch
points where we have interpolated a lot.
Adding addAnnotation and related functions for
annomate exporting
Explicitly marking joins that are expected to have multiple
matches re: dplyr::join’s new behavior
Smol change to not grab unnecessary columns in
addGps
Big speed improvements for processing with
mode='time' and mode='recording'
Converting all paths to use ‘/’ instead of ‘\’
Found out updateFiles was unuseably slow, so I fixed
it. I dunno, maybe 1000x faster depending on how many files you
have?
Removing the $source item in the
settings slot for each AcousticEvent. These
were not used for anything, and when the source was wav files it would
end up with a huge repetitive list for every event. Ended up taking up a
huge amount of memory, removing this results in
AcousticStudys that are half the size.
Updated filter function for a 2x speed increase.
Turns out quos(…) is expensive when you need to do it thousands of
times, so now passing along the character version of dots
when we can instead of recomputing it.
JK pdate again filter is actually 10x faster. Way
better to pull out all the data into a single df and then just reassign
everything to the proper event
Updated localizations slot to use more standardized
names for imported PGTargetMotion locs. Currently using latitude,
longitude, perpDist, perpDistErr, depth, depthErr. These seem like good
standard localization columns going forward. Changed the
ppVars()$tarMoCols to pull in only columns corresponding to
these, and added new ppVars()$locCols to reflect new
standard column names
Added addNote, getNotes,
removeNote functions for adding and viewing notes. Can be
added to study or event, and will print when they are printed.
addDatabase not working properly for directory of
dbsaddGps when using a dataframe as the
source, thresh argument was not doing anythingmyGram function used for power spectrum
calculations to normalize by average window energy instead of
average window amplitude because we are almost always using
power spectraaddHydrophoneDepth to be able to take numeric
input for constant depthChanging added column fro depth to
hpDepth in addHydrophoneDepth
writeEventClips now has a filter option
to apply low/high/bandpass filters
getSr and matchSR functions were not
working properly in some edge cases
changed getDetectorData to return db
for more usefulness
getBinaryData returns UIDs in the order
given
mode='db' to not repeat UIDs within
a single eventMissed a bug in new addRecordings
addBinaries now works with vector of
folders
Changing addRecordings to return NA values when
reads are not possible instead of omitting
Some fixes to plotGram - previously whistle contours
could plot at wrong frequnecy and time scale could be thrown
off
addDatabase can now accept a folder containing
databases
cepstrum calculations handled better internally
Detection Group Localiser had changed in PAMGuard - reworked code to work with new naming scheme and fail less often if some tables are missing
filter has more regular behavior - no longer returns
NULL if no detections are present, was previously causing
odd behavior in loops
Event order is now preserved when doing
mode='time'
Added functions nDetections, nClicks,
nWhistles, nCepstrum, nGPL that
get total number of detections in an event or study
getICI for type='data' returns one big
dataframe instead of lists of lists of dataframes
Added showBreaks option to
calculateAverageSpectra to toggle showing line breaks for
multiple events in concatenated spectrogram
Added bindStudies function to combine multiple
AcousticStudy objects
Trying to stabilize processing against minor errors - should no longer crash entire processing if one piece of binary data fails, will try again instead
Trying to fix some crashes with missing Sound Acquisition data
Bug with mode='time' where sample rate could be read
in as a character, causing crashes
calculateAverageSpectra would have problems when
doing multiple events that had detections with repeated UIDs
matchEnvData now has a depth parameter
to specify depth or range of depths to match
Store and print total processing time for
processPgDetections
PAMpalSettings
callAdded support for GPL Detector data!
Added processDate to ancillary info of each
study
Removing some unnecessary package dependencies
testClick from 192kHz to 500kHz to
avoid unnecessary errors when trying to add filters > 96kHzbrightness and contrast parameters
to calculateAverageSpectra. These only affect the
concatenated spectra plot. Also added a ylim parameter for
the mean spectra plot.calculateAverageSpectra, previously was
not working with event names as an argument for evNumcalculateAverageSpectra was always computing noise
spectrum cuz I’m bad at stuff
Bug fix for addRecordings with certain
SoundAcquisition table setups
getBinaryData was improperly complaining about
multiple matches
checkStudy complains about too many things, shush
alreadyNormalizing some paths internally
checkStudy checks for NA values and reports
Small bug in addRecordings that wasn’t assigning
startSample properly for separate wav files
Trying to re-work how we can consistently access SR after
processing. Functions should now be able to automatically tell if a
decimated sample rate is appropriate
(calculateAverageSpectra and writeEventClips
mainly) for clicks in binaries as long as XML settings have been added
with addSettings before processing.
PAMpalSettings has new parameter
settings to add XML settings without an additional call to
addSettings
filter works better with detector names
Grouping in mode='recording' wasn’t working well
when recordings were processed with “Merge contiguous files” checked,
fixed now
writeEventClips works with decimated data now with
useSample = TRUE
Added more info to loadPamguardXML. Now loads in
click sweep classifier type data as well as pre-filter and trigger
filter data
standardClickCalcs no longer fails if upper end of
filter >= to Nyquist
processPgDetections with mode='time'
can run successfully if no Sound_Acquisition table is present by
providing columns db and sr the grouping file
(db not needed if processing a single database)
processPgDetections with mode='db' can
run successfully if no Sound_Acquisition table is present, will ask for
sample rate during processing
Missed some function warnings with new warning system
calculateAverageSpectra now draws lines breaking up
events in concatenated spectrogram if plotting multiple events at
once
plotGram now uses start and end times based on the
start of the event, not the recording
standardClickCalcs incorrectly had outputs labelled
centerHz_3dB and centerHz_10dB when units were
actually in kilohertz. Names have been changed to
centerkHz_3dB and centerkHz_10dB
calculateAverageSpectra has a few new features.
plot can be a vector of lenght two specifying which of the
two plots to create, useful when only one is desired. New parameters
mode and decimate added. mode
allows users to specify 'spec'(default) or
'ceps' to calculate either spectrum or cepstrum of signal.
decimate reduces the samplerate of the signal by an integer
factor before calculations, this can be especially useful for cepstrum
data.
Fixed bug in processPgDetetions for detection group
localiser data crashing with an error related to tarMoCols,
and also updated code to automatically check for event labels. Will look
for (in order) Text_Annotation column, column with
species in the name, column with label in the
name, or column with id in the name. If none of these
exist, defaults to the first non-standard column present in the
database.
filter has new special case to filter by detector
names
processPgDetections rare bug fix with processing bad
event grouping files for mode='time' and
mode='recording'
getBinaryData can now select for detection type,
other functions updated to use this
filter works better with species, in particular can
do is.na(species) now
addHydrophoneDepth function added that will try to
read depth data from a database
processPgDetections for mode='db' now
adds target motion localizations if they are present and stores in the
localizations slot of events
addRecordings stores some sample number and
samplerate data
writeEventClips has new option
useSample to try and use the startSample values stored in
binary files instead of just UTC times
addRecordings tries to use to get start sample data
from database
Fixed bug where processPgDetections would crash if
no comment field was present
calculateICI error fixed when exactly two detections
were present for a detector
export_banter reports names of event level measures
it finds
Switching from using eventUID to event ID for all labeling and
id() purposes
Added ability to work with Pamguard’s XML settings files with
functions addSettings, removeSettings, and
loadPamguardXML. Currently this lets PAMpal
tell if a decimator was in use and adjust the sample rate accordingly,
no longer need to manually set the sr_hz parameter for
standardClickCalcs if XML settings have been added to the
pps.
PAMpalSettings objects now have a
@settings slot to accommodate this addition, older objects
will need to have this slot manually added or they will give warnings of
Not a validObject(), no slot of name "settings" for this object of class "PAMpalsettings"
Added updatePamObject function to deal with updating
S4 classes created in older versions of PAMpal
Added message on load to warn about updating objects
Added new warning system that captures warnings during processing
and function calls and stores them in the ancillary slot of
the AcousticStudy object. These can be accessed with the
new getWarnings function
calculateICI keeps UID info with the datacalculateAverageSpectra has a sort
option to sort clicks by peak frequency in the concatenated
spectrogram
processPgDetections with mode='time'
does a better job of parsing sample rates from database
Added mode='recording' to
processPgDetections that will group events by the start and
end times of wav files used
processPgDetections will try to auotmatically
determine an appropriate mode if none specified
processPgDetections with mode='db' now
reads in the comment column of the database and stores in the
ancillary() slot of each event
addRecordings reads in an extra format of dates
[0-9]{14}_[0-9]{3}
Channels for clicks are read in separately from
standardClickCalcs, now these will be saved even if no calc
functions are present along with UID and UTC
checkStudy behaves better if run on a study with no
events
calculateAverageSpectra doesn’t fail on high SNR
values anymore
plotWaveform and friends have a length argument and
will now attempt to get sample rate values from the
AcousticStudy object if possible
getBinaryData tries to get sample rate
better
plotGram added in preliminary form. Plots
spectrograms and cepstrograms of events, can also overlay WMD detections
onto plot.
calculateAverageSpectra - more improvements. Noise
shouldnt fail anymore, added SNR threshold argument, returns all noise
data and UIDs. Output names changed from all and
average to allSpec and
avgSpec.calculateAverageSpectra has a channel argument,
better color scaling for concatenated spectrogram, and a beta version of
average noise floor
processPgDetections will now automatically use
mode='time' if a grouping argument is provided
and is either a dataframe or a valid filepath
processPgDetections now properly updates progress
bar for mode='time' when some binary files have no data or
are not within any events, previously would not get to 100% or would
jump
calculateAverageSpectra now averages in exponential
space rather than in dB space, and plots are created in separate
plotting windows. The norm option now just scales to a
maximum dB value of 0Multiple functions that tried to match files against a list would
fail if filepaths contained “\” as file separators, these have been
changed to use fixed=TRUE so that this no longer
happens
Can now set function parameters for functions being adding during
the initial call to PAMpalSettings and
addFunction instead of being forced to go through
interactive menus
Cepstrum module can now be named “BurstPulse” or “Burst Pulse” in
addition to “Cepstrum” to be recognized by PAMpal
Function checker was set up poorly and would unintentially write to global env on some failed checks
calculateAverageSpectra was not passing along manual
sr input properly
processPgDetections with mode='time'
handles date converting better, will no longer fail with Excel rounding
12:10:00 to 12:10. Also removed some unnecessary interactive steps, will
now stop and ask user to provide instead of asking user to provide
during call
Fixed bug in calculateICI if large values were
present rounding would lead to bad answers. Now filters results by
z-score < 2 before taking ICI to get rid of outlier large
values
Fixed bug in writeEventClips that was undoing buffer
in the wrong direction if the buffered time was not present in any of
your wav files, would previously get a false warning of “cant find wav
file”
Updated how warnings work for writeEventClips, now
always reported even on failure
Adding filter options to calculateAverageSpectra
similar to standardClickCalcs
Fixed bug where processing with mode='time' was
leaving in full binary path names instead of just file basename, messing
up other stuff like getBinaryData. Fixed and temporary
adjustment to getBinaryData made
getBinaryData was not doing a good job if binaries
had the same name. It do better now
processPgDetections will only store file names that
it actually used instead of all possible matching file names, related to
other binary fix.
Added getICI, getClickData,
getWhistleData, and getCepstrumData as easier
accessors
Updating webpage with calculateICI and
getDetectorData guides
writeEventClips now attaches clip times with
_YYYYMMDDHHMMSS_mmm to the end of file nameswriteWignerData warns about bad directories instead
of crashing
filter fixed for bug in species and database
filtering if these keywords were present on the right hand side of the
call
writeWignerData functionnewUIDs not getting used properly for some users because they were integer64
fixed bug with writeEventClips not reporting all
file names if multiple databases present
addRecordings prints some failure warnings
filter for databases also removes those databasess
from the files(x)$db
writeEventClips updated to use channel
argument
R and package version now stored in studies when created
standardClickCalcs now uses “channelMap” from
binaries to assign correct channel if it is present instead of
defaulting to Channel 1 & 2
export_banter warning messagaes cleaned up
Removed extra “Peak 3dB” and “Peak 10dB” values from
standardClickCalcs
filter now works with a special case for
database and also works for any environmental variables
added
Updating some docs for GitHub pages website
Adding calculateAverageSpectra back
Modified processPgDetections for
mode='db' to work with a possible “newUID” column from
PAMmisc’s updateUID function. Also does a better job of matching if
there are multiple possible binary files.
addGps now asks if you want to add gps data to your
database if it has none
Better warning messages for processing data
writeEventClips modified to work with events or
individual detections
addRecordings function added to deal with keeping
track of wav recordings in a study
Name changed to PAMpal because pamr was taken on
CRAN
Lots of prep for CRAN submission
Changes to standardClickCalcs so it doesnt crash if
peak frequency is 0, happens if lower filter bound is 0
Added updateFiles function to update file locations
of a study object if you have changed computers or moved folders
around
Added checkStudy function to do some sanity checking
for possible issues after data is processed. Currently only checks for
peak freq of 0 which would mean you probably want a different filter
value or add a calibration function
Added test datasets to inst/extdata to go along with added testthat support
NEW FUN FUNCTION calculateAverageSpectra! Calcultes
and plots average spectra from an event! Woohoo!
Fixed issue with export_banter not finding ancillary
measures properly
matchEnvData compatible with update in
PAMmisc package, works with custom functions now
setSpecies handles things more gracefully without
provided method argument
Changed setSpecies to choose insted of stop when
multiple methods provided (default)
Added filter method that works like dplyr’s filter
for detections in an object. Has a special case when specifying
species or Species that will filter an
AcousticStudy object by the species listed in the
$id spot of each species slot
Also added first version of addAnnotation function,
it asks a lot of questions for now
AcousticStudy [ accessor changed to
return another AcousticStudy after subsetting the events in
that study
writeEventClipsFixed bug in addGps that could create duplicate rows
after adding gps to your data. Would occur if two GPS entries occurred
within the same second, now adds milliseconds before matching so that
this is avoided.
Added support for SoundTrap files for
writeEventClips with
format='soundtrap'
Added better progress bar for mode='db' that is
based on binary files not databases
Added writeEventClips function for creating wav
clips of events. Currently needs some adjustments but should work for
Pamguard data if your selection of wav files definitely covers all of
your events
Fixed bug where click detectors were being improperly named if a matched classifier was present in the binary file
matchEnvData
extends a function of the same name in the “PAMmisc” package (as of
PAMmisc v1.4.1). This lets you download environmental data and match it
to your AcousticStudy and AcousticEvent
objectsexport_banter if an event had exactly 1
detection fixedexport_banter for list of
AcousticStudy objects not propagated event names
properlyexport_banter can take list of
AcousticStudy objects now, and fixed a bug where NA values
were being introducedSkip over binaries with no UIDs in
mode='db'
mode='db' was not properly passing along an ID if
you supply it
export_banter now lists which measures were
NA in the $na dataframe output
egClicksError message in processPgDetections for
mode='db' now reports db and binary file failed on
better
Changed folder choosing funciton for addBinaries,
previous version was windows-only and would not properly start in
current working directory
addDatabase now prints added databases for
reference
setSpecies now has method = 'reassign'
that can reassign species id to new ones provided in a dataframeprocessPgDetctions bug fixed when encountering a binary
with 0 detectionsprocessPgDetections shouldnt crash on empty binary file
that also didnt finish writing the header and footer for
mode='time'processPgDetections handles binary files that never
finished writing without a mysterious crash now. Should only affect
mode='time'.standardClickCalcs changed to have a
filterfrom_khz and filterto_khz option so that
a bandpass filter can be applied. If only a highpass filter is desired
simply leave filterto_khz as the default
NULLaddCalibration reworked slightly again, created
calibration function now takes frequency in Hz as input and outputs dB
correction to add instead of taking in result of seewave::spec and
outputting corrected spec. This makes it more flexible and means we
aren’t calculating spectrum twice for no reason
standardClickCalcs adjusted to use new calibration,
and temporarily has a new parameter calculated - dBPP -
which is the peak to peak value as traditionally defined in acoustics.
This is mostly for testing comparability to other Matlab based code of
new calibration stuff. Also the spectrum is never rescaled to a max of 0
like it was previously, hopefully should represent accurate SPL levels
with new calibration code
addCalibration now asks for units of your calibration,
and should properly add or subtract this value from calculated spectrum
depending on units selectedexport_banter now has an option to split your data into
training and test sets by specifying a proportion for the
training argument, and now puts out a pretty table showing
a summary of your events and speciesprocessPgDetections has some minor updates to improve
clarity when binary files or databases aren’t found using
mode='time'getPgDetections has now been re-named to
processPgDetections to more accurately reflect what it is
doing. Functions starting with get___ will be used just for
accessing data
showWaveform and related functions have been renamed
to plotWaveform
General naming consistency overhaul - sr and
db should now be used in place of sampleRate
and database wherever these were previously used, and this
should be the naming convention going forward. This means included
functions will need to be re-added (they previously relied on it being
named sampleRate), and any custom functions should expect
data to contain the item sr and not
sampleRate
AcousticStudy class has been added. This will now be
the class of object returned by processPgDetections, it
stores your list of AcousticEvent objects with other
important data.
Any data processed in previous versions will need to be re-run,
and all functions in older PAMrSettings files will need to
be removed and re-added
New Function: calculateICI calculates the
inter-click interval of click data, and stores it in the
ancillary slot of an AcousticEvent.
New Function: plotDataExplorer creates an
interactive plot to allow users to explore the data in an
AcousticStudy, AcousticEvent, or
data.frame. Plot can be colored or facetted by any columns
that are characters or factors, and any numeric columns can be plotted
with ggplot’s geom_density
New Function: getDetectorData gathers all detector
data into single data frames for each detector type
('click', 'whistle', and
'cepstrum') for easier manipulation
Detector dataframes in AcousticEvents now have a
'calltype' associated with them, currently one of
’whistle', 'click', or
'cepstrum'. This allows for future fun stuff to
happen
getBinaryData will now attempt to get the
appropriate sample rate for each data point, either from the settings or
matching by time using the database file if more than one sample rate
was in your data.
Many speed improvements - click calculations should take about
half the time, and processPgDetections with
mode='time' will now skip over binaries that are outside of
the time range of specified events
getPgDetections no longer has an option
mode='all', and it is no longer necessary to supply a
sample rate for mode='time'. It will now attempt to match
events to a correct database used on time stamps, the match the
appropriate sample rate the same way that mode='db' does.
If a manual sample rate needs to be applied it should now be entered
into the grouping table
Functions addBinaries and addDatabase
can now add files from another PAMrSettings object, and
will report how many files have been added when finishing
export_banter will now attempt to find event level
measures in the 'measures' item in the
ancillary slot of each AcousticEvent.
export_banter no longer has a reportNA
option, any NA values that are removed are now always saved
to a separate 'na' item in the list output. The function
also reports how many detections were processed.
addGps now also stores all of the gps data loaded
into the gps slot of the AcousticStudy instead
of only adding coordinates to detections
getPgDetections will name events with database appended
for method = 'db' instead of just event ID number to ensure
uniqueness across multiple databasessetSpecies can now use a dataframe for
method = 'manual', and has a top secret option for SRexport_banter with options to exclude certain
species and to export data without species codes to use for prediction
only instead of training a banter modelBetter error tracking when functions cause
getPgDetections to crash
Now reads in angles and angleErrors from click data
export_banter allows you to specify certain columns
to not export
'time' mode for getPgDetections will
now report a sample event time so you can see if times are being
converted properly from your csv before proceeding with
calculations
Fixed an issue where getPgDetections would not work
if both Detection Group Localizer and Offline Click events were present
in a database.
Renamed eventType and Text_Annotation
columns from event databases to eventLabel within detection
dataframes so there is consistency between the two
Removed some unnecessary columns from detection dataframes,
including detectorName, sampleRate,
Id, parentUID, and
comment
Fixed a bug in how getBinaryData was checking for
multiple matches on the same UID
'db'Added an id slot to AcousticEvent
objects. Note that this will cause existing AcousticEvent
objects to behave poorly until they have their id slot
created / updated using the new setIdSlot
function.
Added setIdSlot function to update older
AcousticEvent objects to the new format
Changed event naming for mode='time' in
getPgDetections. Will now only append numbers if event is
not unique, and will also insert an underscore before the
number
export_banter now properly checks for cases when
there are no detectors in an event instead of crashing
confusingly
export_banter no longer using list
names to index and create unique event namesexport_banter now removes NA rows, and has reportNA
option to see which ones are NA
Detector names have spaces replaced with _ to avoid weird issues later
Dealing with zero detection events better for
export_banter
Temporary fix for click calculations with lots of zeroes in wave form - no more NA
standardClickCalcs now supports manual input of sample
rate. Default argument is 'auto', which will read from the
database. User can supply a numeric value for sample rate in hertz
instead.Added a check in addDatabase to see if all files are
actually .sqlite3 databases
Added a tryCatch in getPgDetections for
mode db so that it shouldn’t stop completely when
encountering an error and lose all previously analysed DBs
seewave::spec, it can produce
NA values for the frequency if the input wave is long. Adjusted parts
standardClickCalcs and addCalibration to work
around this.getPgDetections changed to work by specifying a
mode as an argument instead of calling separate functions.
Can now create events using a csv or dataframe with start and end times
specified.
Changed export_banter to export a list with named
item detectors instead of detections, no other
functional change.
Added setSpecies functions for assigning species
classifications to AcousticEvents.
Changed getDbData to default to looking for both
OfflineEvents tables and DetectionGroupLocaliser tables, will still only
load one if a specific type is provided for
grouping.
Added addCalibration, applyCalibration,
and findCalibration functions, as well as a
plot method that will show the calibration function used.
See the Calibration section above for more details.
Fixed a bug in removeFunction that would cause the
incorrect number of functions to show in certain cases, and that would
cause all functions to be removed when only one was selected.
standardClickCalcs has been adjusted to work with
the new calibration methods. See Calibration section above for
more details.
Added addGps function for adding matching GPS data
to your detections. This allows you to supply a dataframe of Lat/Long
locations with timestamps to match to your detections.
Added showWaveform, showSpectrogram,
and showWigner functions that allow you to easily plot the
waveform, spectrogram, or wigner plot of a detection in an
AcousticEvent object by selecting the UID(s) you want to
investigate further. getBinaryData is also added as a
helper function for these, lets you easily get the binary file data for
a single detection.
standardClickCalcs now supports supplying a
Wave class object as input
Rocca (roccaWhistleCalcs) and cepstrum
(standardCepstrumCalcs) functions added. These are also
added by default to a new PRS.
changed AcousticEvent class slot name from
specClass to species