curs_initscr(3x) Library calls curs_initscr(3x)
initscr, newterm, endwin, isendwin, set_term, delscreen - initialize,
manipulate, or tear down curses terminal interface
#include <curses.h>
WINDOW * initscr(void);
int endwin(void);
bool isendwin(void);
SCREEN * newterm(const char * type, FILE * outf, FILE * inf);
SCREEN * set_term(SCREEN * new);
void delscreen(SCREEN * sp);
initscr determines the terminal type and initializes the library's
SCREEN, WINDOW, and other data structures. It is normally the first
curses function call a program performs. However, an application with
unusual needs might employ a few other curses functions beforehand:
o slk_init(3x) to set up soft-label keys;
o filter(3x) if the program is designed to operate in a process
pipeline;
o ripoffline(3x) to reserve up to five lines at the top and/or bottom
of the screen from management by stdscr, the standard curses
window; and
o use_env(3x) and/or use_tioctl(3x) to configure use of the process
environment and operating system's terminal driver, respectively,
when determining the dimensions of the terminal display.
Further, a curses program might call newterm prior to or instead of
initscr in two specialized cases described in its subsection below.
initscr causes the first refresh(3x) call to clear the screen. If
errors occur, initscr writes an appropriate diagnostic message to the
standard error stream and exits; otherwise, it returns a pointer to
stdscr.
An application that manages multiple terminals should call newterm once
for each such device instead of initscr. newterm's arguments are
o the type of the associated terminal, or NULL to use the TERM
environment variable;
o an output stream outf connected to the terminal; and
o an input stream inf connected to the terminal. It returns a
variable of structure type SCREEN *, which should be saved for
later use with set_term and delscreen.
newterm passes the file descriptor of the output stream to the terminfo
function setupterm(3x), which returns a pointer to a TERMINAL structure
that newterm stores in the SCREEN it returns to the application.
An application that needs to inspect a terminal type's capabilities, so
that it can continue to run in a line-oriented mode if the terminal
cannot support a screen-oriented program, would also use newterm. If
at most one terminal connection is needed, the programmer could perform
such a capability test, decide which mode in which to operate, then
call delscreen on the pointer returned by newterm, and proceed with
either initscr or a non-curses interface.
The program must also call endwin for each terminal being used before
exiting from curses. If newterm is called more than once for the same
terminal, the first terminal referred to must be the last one for which
endwin is called.
A program should always call endwin before exiting the application or
temporarily suspending curses's management of the terminal. endwin:
o resets colors to correspond with the default color pair 0,
o moves the cursor to the lower left-hand corner of the screen,
o clears the remainder of the line so that it uses the default
colors,
o sets the cursor to normal visibility (see curs_set(3x)),
o if applicable, stops cursor-addressing mode using the exit_ca_mode
(rmcup) terminal capability, and
o restores terminal modes (see reset_shell_mode(3x)).
Calling refresh(3x) or doupdate(3x) after a temporary escape causes
curses to resume managing the terminal.
isendwin returns TRUE if endwin has been called without any subsequent
calls to wrefresh(3x), and FALSE otherwise.
set_term re-orients the curses library's operations to another terminal
when the application has arranged to manage more than one with newterm.
set_term expects a SCREEN pointer previously returned by newterm as an
argument, and returns the previous one. set_term is the only curses
API function that manipulates SCREEN pointers; all others affect only
the current terminal.
delscreen frees the storage backing the supplied SCREEN pointer
argument. endwin does not, so that an application can resume managing
a terminal with curses after a (possibly conditional or temporary)
suspension; see curs_kernel(3x). Call delscreen after endwin when a
particular SCREEN structure is no longer needed.
endwin returns OK on success and ERR on failure.
In ncurses,
o endwin returns ERR if
o the terminal was not initialized,
o endwin is called more than once without updating the screen, or
o reset_shell_mode(3x) returns ERR.
o newterm returns ERR if it cannot allocate storage for the SCREEN
data structure or the top-level windows thereof: curscr, newscr,
and stdscr.
Functions that return pointers return NULL on error. In ncurses,
set_term does not fail.
X/Open Curses, Issue 4 describes these functions. It specifies no
error conditions for them.
X/Open Curses specifies that portable applications must not call
initscr more than once:
o The portable way to use initscr is once only, using refresh(3x) to
restore the screen after endwin.
o This implementation allows using initscr after endwin.
Old versions of curses, e.g., BSD 4.4, would return a null pointer from
initscr when an error is detected, rather than exiting. It is safe but
redundant to check the return value of initscr in X/Open Curses.
Calling endwin does not dispose of the memory allocated in initscr or
newterm. Deleting a SCREEN provides a way to do this:
o X/Open Curses does not say what happens to WINDOWs when delscreen
"frees storage associated with the SCREEN" nor does the SVr4
documentation help, adding that it should be called after endwin if
a SCREEN is no longer needed.
o However, WINDOWs are implicitly associated with a SCREEN. so that
it is reasonable to expect delscreen to deal with these.
o SVr4 curses deletes the standard WINDOW structures stdscr and
curscr as well as a work area newscr. SVr4 curses ignores other
windows.
o Since version 4.0 (1996), ncurses has maintained a list of all
windows for each screen, using that information to delete those
windows when delscreen is called.
o NetBSD copied this feature of ncurses in 2001. PDCurses follows
the SVr4 model, deleting only the standard WINDOW structures.
Different implementations may disagree regarding the level of some
functions. For example, SCREEN (returned by newterm) and TERMINAL
(returned by setupterm(3x)) hold file descriptors for the output
stream. If an application switches screens using set_term, or switches
terminals using set_curterm(3x), applications which use the output file
descriptor can have different behavior depending on which structure
holds the corresponding descriptor.
o NetBSD's baudrate function uses the descriptor in TERMINAL.
ncurses and SVr4 curses use the descriptor in SCREEN.
o NetBSD and ncurses use the descriptor in TERMINAL for terminal I/O
modes, e.g., def_shell_mode(3x), def_prog_mode(3x). SVr4 curses
uses the descriptor in SCREEN.
Unset TERM Variable
If the TERM variable is missing or empty, initscr uses the value
"unknown", which normally corresponds to a terminal entry with the
generic (gn) capability. Generic entries are detected by setupterm(3x)
and cannot be used for full-screen operation. Other implementations
may handle a missing/empty TERM variable differently.
Quoting from X/Open Curses Issue 7, section 3.1.1:
Curses implementations may provide for special handling of the
SIGINT, SIGQUIT, and SIGTSTP signals if their disposition is
SIG_DFL at the time initscr is called...
Any special handling for these signals may remain in effect for
the life of the process or until the process changes the
disposition of the signal.
None of the Curses functions are required to be safe with respect
to signals...
This implementation establishes signal handlers during initialization,
e.g., initscr or newterm. Applications which must handle these signals
should set up the corresponding handlers after initializing the
library:
SIGINT
The handler attempts to clean up the screen on exit. Although it
usually works as expected, there are limitations:
o Walking the SCREEN list is unsafe, since all list management
is done without any signal blocking.
o On systems which have REENTRANT turned on, set_term uses
functions which could deadlock or misbehave in other ways.
o endwin calls other functions, many of which use stdio(3) or
other library functions which are clearly unsafe.
SIGTERM
This uses the same handler as SIGINT, with the same limitations.
It is not mentioned in X/Open Curses, but is more suitable for
this purpose than SIGQUIT (which is used in debugging).
SIGTSTP
This handles the stop signal, used in job control. When resuming
the process, this implementation discards pending input with
flushinp(3x), and repaints the screen assuming that it has been
completely altered. It also updates the saved terminal modes with
def_shell_mode(3x).
SIGWINCH
This handles the window-size changes which were ignored in the
standardization efforts. The handler sets a (signal-safe)
variable that is later tested by wgetch(3x) and wget_wch(3x).
o wgetch returns the key code KEY_RESIZE.
o wget_wch returns KEY_CODE_YES and sets its wch parameter to
KEY_RESIZE.
At the same time, ncurses calls resizeterm to adjust the standard
screen stdscr, and update other data such as LINES and COLS.
curses(3x), curs_kernel(3x), curs_refresh(3x), curs_slk(3x),
curs_terminfo(3x), curs_util(3x), curs_variables(3x)
ncurses 6.5 2024-12-28 curs_initscr(3x)