commit addba38e7c3bc19036a05c83bcce7878dc644d87 Author: Greg Kroah-Hartman Date: Thu Aug 12 13:19:45 2021 +0200 Linux 4.19.203 Link: https://lore.kernel.org/r/20210810172944.179901509@linuxfoundation.org Tested-by: Hulk Robot Tested-by: Sudip Mukherjee Tested-by: Linux Kernel Functional Testing Tested-by: Guenter Roeck Tested-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman commit 4534571e1baf18dfe8a12addcb08cd82c2bd11b6 Author: Anson Huang Date: Fri Aug 31 15:53:12 2018 +0800 ARM: imx: add mmdc ipg clock operation for mmdc [ Upstream commit 9454a0caff6ac6d2a5ea17dd624dc13387bbfcd3 ] i.MX6 SoCs have MMDC ipg clock for registers access, to make sure MMDC registers access successfully, add optional clock enable for MMDC driver. Signed-off-by: Anson Huang Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin commit fa73444311956b5b1f14382ef0f6e32198c1c363 Author: Letu Ren Date: Sun Jul 25 21:45:12 2021 +0800 net/qla3xxx: fix schedule while atomic in ql_wait_for_drvr_lock and ql_adapter_reset [ Upstream commit 92766c4628ea349c8ddab0cd7bd0488f36e5c4ce ] When calling the 'ql_wait_for_drvr_lock' and 'ql_adapter_reset', the driver has already acquired the spin lock, so the driver should not call 'ssleep' in atomic context. This bug can be fixed by using 'mdelay' instead of 'ssleep'. Reported-by: Letu Ren Signed-off-by: Letu Ren Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 704e08f3475347666ebed4e018fad7277834f056 Author: Prarit Bhargava Date: Tue Jan 5 10:16:27 2021 -0500 alpha: Send stop IPI to send to online CPUs [ Upstream commit caace6ca4e06f09413fb8f8a63319594cfb7d47d ] This issue was noticed while debugging a shutdown issue where some secondary CPUs are not being shutdown correctly. A fix for that [1] requires that secondary cpus be offlined using the cpu_online_mask so that the stop operation is a no-op if CPU HOTPLUG is disabled. I, like the author in [1] looked at the architectures and found that alpha is one of two architectures that executes smp_send_stop() on all possible CPUs. On alpha, smp_send_stop() sends an IPI to all possible CPUs but only needs to send them to online CPUs. Send the stop IPI to only the online CPUs. [1] https://lkml.org/lkml/2020/1/10/250 Signed-off-by: Prarit Bhargava Cc: Richard Henderson Cc: Ivan Kokshaysky Signed-off-by: Matt Turner Signed-off-by: Sasha Levin commit 4d7ee5d0a6a960f1790be3c9a0c71573405df63a Author: Shreyansh Chouhan Date: Fri Jul 9 20:59:29 2021 +0530 reiserfs: check directory items on read from disk [ Upstream commit 13d257503c0930010ef9eed78b689cec417ab741 ] While verifying the leaf item that we read from the disk, reiserfs doesn't check the directory items, this could cause a crash when we read a directory item from the disk that has an invalid deh_location. This patch adds a check to the directory items read from the disk that does a bounds check on deh_location for the directory entries. Any directory entry header with a directory entry offset greater than the item length is considered invalid. Link: https://lore.kernel.org/r/20210709152929.766363-1-chouhan.shreyansh630@gmail.com Reported-by: syzbot+c31a48e6702ccb3d64c9@syzkaller.appspotmail.com Signed-off-by: Shreyansh Chouhan Signed-off-by: Jan Kara Signed-off-by: Sasha Levin commit df2f583b63637f9f882ba604cf23e0336de82220 Author: Yu Kuai Date: Fri Jul 2 12:07:43 2021 +0800 reiserfs: add check for root_inode in reiserfs_fill_super [ Upstream commit 2acf15b94d5b8ea8392c4b6753a6ffac3135cd78 ] Our syzcaller report a NULL pointer dereference: BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 116e95067 P4D 116e95067 PUD 1080b5067 PMD 0 Oops: 0010 [#1] SMP KASAN CPU: 7 PID: 592 Comm: a.out Not tainted 5.13.0-next-20210629-dirty #67 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-p4 RIP: 0010:0x0 Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. RSP: 0018:ffff888114e779b8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 1ffff110229cef39 RCX: ffffffffaa67e1aa RDX: 0000000000000000 RSI: ffff88810a58ee00 RDI: ffff8881233180b0 RBP: ffffffffac38e9c0 R08: ffffffffaa67e17e R09: 0000000000000001 R10: ffffffffb91c5557 R11: fffffbfff7238aaa R12: ffff88810a58ee00 R13: ffff888114e77aa0 R14: 0000000000000000 R15: ffff8881233180b0 FS: 00007f946163c480(0000) GS:ffff88839f1c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000001099c1000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __lookup_slow+0x116/0x2d0 ? page_put_link+0x120/0x120 ? __d_lookup+0xfc/0x320 ? d_lookup+0x49/0x90 lookup_one_len+0x13c/0x170 ? __lookup_slow+0x2d0/0x2d0 ? reiserfs_schedule_old_flush+0x31/0x130 reiserfs_lookup_privroot+0x64/0x150 reiserfs_fill_super+0x158c/0x1b90 ? finish_unfinished+0xb10/0xb10 ? bprintf+0xe0/0xe0 ? __mutex_lock_slowpath+0x30/0x30 ? __kasan_check_write+0x20/0x30 ? up_write+0x51/0xb0 ? set_blocksize+0x9f/0x1f0 mount_bdev+0x27c/0x2d0 ? finish_unfinished+0xb10/0xb10 ? reiserfs_kill_sb+0x120/0x120 get_super_block+0x19/0x30 legacy_get_tree+0x76/0xf0 vfs_get_tree+0x49/0x160 ? capable+0x1d/0x30 path_mount+0xacc/0x1380 ? putname+0x97/0xd0 ? finish_automount+0x450/0x450 ? kmem_cache_free+0xf8/0x5a0 ? putname+0x97/0xd0 do_mount+0xe2/0x110 ? path_mount+0x1380/0x1380 ? copy_mount_options+0x69/0x140 __x64_sys_mount+0xf0/0x190 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae This is because 'root_inode' is initialized with wrong mode, and it's i_op is set to 'reiserfs_special_inode_operations'. Thus add check for 'root_inode' to fix the problem. Link: https://lore.kernel.org/r/20210702040743.1918552-1-yukuai3@huawei.com Signed-off-by: Yu Kuai Signed-off-by: Jan Kara Signed-off-by: Sasha Levin commit 5d4f303010b717a05ec560dc1228918116f58637 Author: Christoph Hellwig Date: Fri Jul 9 15:02:37 2021 +0200 libata: fix ata_pio_sector for CONFIG_HIGHMEM [ Upstream commit ecef6a9effe49e8e2635c839020b9833b71e934c ] Data transfers are not required to be block aligned in memory, so they span two pages. Fix this by splitting the call to >sff_data_xfer into two for that case. This has been broken since the initial libata import before the damn of git, but was uncovered by the legacy ide driver removal. Reported-by: kernel test robot Signed-off-by: Christoph Hellwig Link: https://lore.kernel.org/r/20210709130237.3730959-1-hch@lst.de Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit 8d0f60617bc108e866c26fbd1a9f11cc5f3c3014 Author: Reinhard Speyerer Date: Wed Jun 12 19:02:46 2019 +0200 qmi_wwan: add network device usage statistics for qmimux devices commit 44f82312fe9113bab6642f4d0eab6b1b7902b6e1 upstream. Add proper network device usage statistics for qmimux devices instead of reporting all-zero values for them. Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support") Cc: Daniele Palmas Signed-off-by: Reinhard Speyerer Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 344dd5f1a330eb4baddbb81fa28e89ba97dbeaa1 Author: Like Xu Date: Mon Aug 2 15:08:50 2021 +0800 perf/x86/amd: Don't touch the AMD64_EVENTSEL_HOSTONLY bit inside the guest commit df51fe7ea1c1c2c3bfdb81279712fdd2e4ea6c27 upstream. If we use "perf record" in an AMD Milan guest, dmesg reports a #GP warning from an unchecked MSR access error on MSR_F15H_PERF_CTLx: [] unchecked MSR access error: WRMSR to 0xc0010200 (tried to write 0x0000020000110076) at rIP: 0xffffffff8106ddb4 (native_write_msr+0x4/0x20) [] Call Trace: [] amd_pmu_disable_event+0x22/0x90 [] x86_pmu_stop+0x4c/0xa0 [] x86_pmu_del+0x3a/0x140 The AMD64_EVENTSEL_HOSTONLY bit is defined and used on the host, while the guest perf driver should avoid such use. Fixes: 1018faa6cf23 ("perf/x86/kvm: Fix Host-Only/Guest-Only counting with SVM disabled") Signed-off-by: Like Xu Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Liam Merwick Tested-by: Kim Phillips Tested-by: Liam Merwick Link: https://lkml.kernel.org/r/20210802070850.35295-1-likexu@tencent.com Signed-off-by: Greg Kroah-Hartman commit 683b47d0ebb10ba0d272604b09686e023d10d40c Author: Dongliang Mu Date: Tue Jul 20 18:01:16 2021 +0800 spi: meson-spicc: fix memory leak in meson_spicc_remove commit 8311ee2164c5cd1b63a601ea366f540eae89f10e upstream. In meson_spicc_probe, the error handling code needs to clean up master by calling spi_master_put, but the remove function does not have this function call. This will lead to memory leak of spicc->master. Reported-by: Dongliang Mu Fixes: 454fa271bc4e("spi: Add Meson SPICC driver") Signed-off-by: Dongliang Mu Link: https://lore.kernel.org/r/20210720100116.1438974-1-mudongliangabcd@gmail.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 4af3486a7f8150d141a1f9390e63e169b2b64771 Author: Sean Christopherson Date: Wed Aug 4 14:46:09 2021 -0700 KVM: x86/mmu: Fix per-cpu counter corruption on 32-bit builds commit d5aaad6f83420efb8357ac8e11c868708b22d0a9 upstream. Take a signed 'long' instead of an 'unsigned long' for the number of pages to add/subtract to the total number of pages used by the MMU. This fixes a zero-extension bug on 32-bit kernels that effectively corrupts the per-cpu counter used by the shrinker. Per-cpu counters take a signed 64-bit value on both 32-bit and 64-bit kernels, whereas kvm_mod_used_mmu_pages() takes an unsigned long and thus an unsigned 32-bit value on 32-bit kernels. As a result, the value used to adjust the per-cpu counter is zero-extended (unsigned -> signed), not sign-extended (signed -> signed), and so KVM's intended -1 gets morphed to 4294967295 and effectively corrupts the counter. This was found by a staggering amount of sheer dumb luck when running kvm-unit-tests on a 32-bit KVM build. The shrinker just happened to kick in while running tests and do_shrink_slab() logged an error about trying to free a negative number of objects. The truly lucky part is that the kernel just happened to be a slightly stale build, as the shrinker no longer yells about negative objects as of commit 18bb473e5031 ("mm: vmscan: shrink deferred objects proportional to priority"). vmscan: shrink_slab: mmu_shrink_scan+0x0/0x210 [kvm] negative objects to delete nr=-858993460 Fixes: bc8a3d8925a8 ("kvm: mmu: Fix overflow on kvm mmu page limit calculation") Cc: stable@vger.kernel.org Cc: Ben Gardon Signed-off-by: Sean Christopherson Message-Id: <20210804214609.1096003-1-seanjc@google.com> Reviewed-by: Jim Mattson Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit 360928c500d1c004e2e01c432ba62dd800f976c5 Author: Paolo Bonzini Date: Wed Jul 14 17:37:49 2021 -0400 KVM: x86: accept userspace interrupt only if no event is injected commit fa7a549d321a4189677b0cea86e58d9db7977f7b upstream. Once an exception has been injected, any side effects related to the exception (such as setting CR2 or DR6) have been taked place. Therefore, once KVM sets the VM-entry interruption information field or the AMD EVENTINJ field, the next VM-entry must deliver that exception. Pending interrupts are processed after injected exceptions, so in theory it would not be a problem to use KVM_INTERRUPT when an injected exception is present. However, DOSEMU is using run->ready_for_interrupt_injection to detect interrupt windows and then using KVM_SET_SREGS/KVM_SET_REGS to inject the interrupt manually. For this to work, the interrupt window must be delayed after the completion of the previous event injection. Cc: stable@vger.kernel.org Reported-by: Stas Sergeev Tested-by: Stas Sergeev Fixes: 71cc849b7093 ("KVM: x86: Fix split-irqchip vs interrupt injection window request") Reviewed-by: Sean Christopherson Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit 0c83af3b16d201733a0881296b724b90b6ba56b7 Author: Zheyu Ma Date: Tue Jun 22 07:11:31 2021 +0000 pcmcia: i82092: fix a null pointer dereference bug commit e39cdacf2f664b09029e7c1eb354c91a20c367af upstream. During the driver loading process, the 'dev' field was not assigned, but the 'dev' field was referenced in the subsequent 'i82092aa_set_mem_map' function. Signed-off-by: Zheyu Ma CC: [linux@dominikbrodowski.net: shorten commit message, add Cc to stable] Signed-off-by: Dominik Brodowski Signed-off-by: Greg Kroah-Hartman commit 0d631eeedf40ab717f8472fb5d743a16416e5218 Author: Maciej W. Rozycki Date: Sat Jun 26 06:11:13 2021 +0200 MIPS: Malta: Do not byte-swap accesses to the CBUS UART commit 9a936d6c3d3d6c33ecbadf72dccdb567b5cd3c72 upstream. Correct big-endian accesses to the CBUS UART, a Malta on-board discrete TI16C550C part wired directly to the system controller's device bus, and do not use byte swapping with the 32-bit accesses to the device. The CBUS is used for devices such as the boot flash memory needed early on in system bootstrap even before PCI has been initialised. Therefore it uses the system controller's device bus, which follows the endianness set with the CPU, which means no byte-swapping is ever required for data accesses to CBUS, unlike with PCI. The CBUS UART uses the UPIO_MEM32 access method, that is the `readl' and `writel' MMIO accessors, which on the MIPS platform imply byte-swapping with PCI systems. Consequently the wrong byte lane is accessed with the big-endian configuration and the UART is not correctly accessed. As it happens the UPIO_MEM32BE access method makes use of the `ioread32' and `iowrite32' MMIO accessors, which still use `readl' and `writel' respectively, however they byte-swap data passed, effectively cancelling swapping done with the accessors themselves and making it suitable for the CBUS UART. Make the CBUS UART switch between UPIO_MEM32 and UPIO_MEM32BE then, based on the endianness selected. With this change in place the device is correctly recognised with big-endian Malta at boot, along with the Super I/O devices behind PCI: Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled printk: console [ttyS0] disabled serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A printk: console [ttyS0] enabled printk: bootconsole [uart8250] disabled serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A serial8250.0: ttyS2 at MMIO 0x1f000900 (irq = 20, base_baud = 230400) is a 16550A Fixes: e7c4782f92fc ("[MIPS] Put an end to 's long and annyoing existence") Cc: stable@vger.kernel.org # v2.6.23+ Reviewed-by: Philippe Mathieu-Daudé Signed-off-by: Maciej W. Rozycki Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106260524430.37803@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman commit 2c39c32f92084736bc871c1ef096602eb1cc7b5b Author: Maciej W. Rozycki Date: Sat Jun 26 06:11:05 2021 +0200 serial: 8250: Mask out floating 16/32-bit bus bits commit e5227c51090e165db4b48dcaa300605bfced7014 upstream. Make sure only actual 8 bits of the IIR register are used in determining the port type in `autoconfig'. The `serial_in' port accessor returns the `unsigned int' type, meaning that with UPIO_AU, UPIO_MEM16, UPIO_MEM32, and UPIO_MEM32BE access types more than 8 bits of data are returned, of which the high order bits will often come from bus lines that are left floating in the data phase. For example with the MIPS Malta board's CBUS UART, where the registers are aligned on 8-byte boundaries and which uses 32-bit accesses, data as follows is returned: YAMON> dump -32 0xbf000900 0x40 BF000900: 1F000942 1F000942 1F000900 1F000900 ...B...B........ BF000910: 1F000901 1F000901 1F000900 1F000900 ................ BF000920: 1F000900 1F000900 1F000960 1F000960 ...........`...` BF000930: 1F000900 1F000900 1F0009FF 1F0009FF ................ YAMON> Evidently high-order 24 bits return values previously driven in the address phase (the 3 highest order address bits used with the command above are masked out in the simple virtual address mapping used here and come out at zeros on the external bus), a common scenario with bus lines left floating, due to bus capacitance. Consequently when the value of IIR, mapped at 0x1f000910, is retrieved in `autoconfig', it comes out at 0x1f0009c1 and when it is right-shifted by 6 and then assigned to 8-bit `scratch' variable, the value calculated is 0x27, not one of 0, 1, 2, 3 expected in port type determination. Fix the issue then, by assigning the value returned from `serial_in' to `scratch' first, which masks out 24 high-order bits retrieved, and only then right-shift the resulting 8-bit data quantity, producing the value of 3 in this case, as expected. Fix the same issue in `serial_dl_read'. The problem first appeared with Linux 2.6.9-rc3 which predates our repo history, but the origin could be identified with the old MIPS/Linux repo also at: as commit e0d2356c0777 ("Merge with Linux 2.6.9-rc3."), where code in `serial_in' was updated with this case: + case UPIO_MEM32: + return readl(up->port.membase + offset); + which made it produce results outside the unsigned 8-bit range for the first time, though obviously it is system dependent what actual values appear in the high order bits retrieved and it may well have been zeros in the relevant positions with the system the change originally was intended for. It is at that point that code in `autoconf' should have been updated accordingly, but clearly it was overlooked. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org # v2.6.12+ Reviewed-by: Philippe Mathieu-Daudé Signed-off-by: Maciej W. Rozycki Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106260516220.37803@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman commit bc1954aa8a7e195ebd686a77e81c11863ce8edbf Author: Theodore Ts'o Date: Wed Aug 4 14:23:55 2021 -0400 ext4: fix potential htree corruption when growing large_dir directories commit 877ba3f729fd3d8ef0e29bc2a55e57cfa54b2e43 upstream. Commit b5776e7524af ("ext4: fix potential htree index checksum corruption) removed a required restart when multiple levels of index nodes need to be split. Fix this to avoid directory htree corruptions when using the large_dir feature. Cc: stable@kernel.org # v5.11 Cc: Благодаренко Артём Fixes: b5776e7524af ("ext4: fix potential htree index checksum corruption) Reported-by: Denis Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman commit 76ccb26c5312760113b2b3ef6de307474e8d4b45 Author: Alex Xu (Hello71) Date: Thu Aug 5 10:40:47 2021 -0400 pipe: increase minimum default pipe size to 2 pages commit 46c4c9d1beb7f5b4cec4dd90e7728720583ee348 upstream. This program always prints 4096 and hangs before the patch, and always prints 8192 and exits successfully after: int main() { int pipefd[2]; for (int i = 0; i < 1025; i++) if (pipe(pipefd) == -1) return 1; size_t bufsz = fcntl(pipefd[1], F_GETPIPE_SZ); printf("%zd\n", bufsz); char *buf = calloc(bufsz, 1); write(pipefd[1], buf, bufsz); read(pipefd[0], buf, bufsz-1); write(pipefd[1], buf, 1); } Note that you may need to increase your RLIMIT_NOFILE before running the program. Fixes: 759c01142a ("pipe: limit the per-user amount of pages allocated in pipes") Cc: Link: https://lore.kernel.org/lkml/1628086770.5rn8p04n6j.none@localhost/ Link: https://lore.kernel.org/lkml/1628127094.lxxn016tj7.none@localhost/ Signed-off-by: Alex Xu (Hello71) Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 51f990c70a320cd51317ba21be1150bc40a96d91 Author: Johan Hovold Date: Wed Jun 23 10:45:21 2021 +0200 media: rtl28xxu: fix zero-length control request commit 76f22c93b209c811bd489950f17f8839adb31901 upstream. The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation. Control transfers without a data stage are treated as OUT requests by the USB stack and should be using usb_sndctrlpipe(). Failing to do so will now trigger a warning. The driver uses a zero-length i2c-read request for type detection so update the control-request code to use usb_sndctrlpipe() in this case. Note that actually trying to read the i2c register in question does not work as the register might not exist (e.g. depending on the demodulator) as reported by Eero Lehtinen . Reported-by: syzbot+faf11bbadc5a372564da@syzkaller.appspotmail.com Reported-by: Eero Lehtinen Tested-by: Eero Lehtinen Fixes: d0f232e823af ("[media] rtl28xxu: add heuristic to detect chip type") Cc: stable@vger.kernel.org # 4.0 Cc: Antti Palosaari Signed-off-by: Johan Hovold Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman commit ef757e5b3bf2ddfeed744353ad59a0b63a8370c6 Author: Xiangyang Zhang Date: Mon Jun 28 23:22:39 2021 +0800 staging: rtl8723bs: Fix a resource leak in sd_int_dpc commit 990e4ad3ddcb72216caeddd6e62c5f45a21e8121 upstream. The "c2h_evt" variable is not freed when function call "c2h_evt_read_88xx" failed Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver") Reviewed-by: Hans de Goede Signed-off-by: Xiangyang Zhang Cc: stable Link: https://lore.kernel.org/r/20210628152239.5475-1-xyz.sun.ok@gmail.com Signed-off-by: Greg Kroah-Hartman commit 78264dfb6fafa8efff024a473dfbeec3bb861f18 Author: Tyler Hicks Date: Mon Jun 14 17:33:13 2021 -0500 optee: Clear stale cache entries during initialization commit b5c10dd04b7418793517e3286cde5c04759a86de upstream. The shm cache could contain invalid addresses if optee_disable_shm_cache() was not called from the .shutdown hook of the previous kernel before a kexec. These addresses could be unmapped or they could point to mapped but unintended locations in memory. Clear the shared memory cache, while being careful to not translate the addresses returned from OPTEE_SMC_DISABLE_SHM_CACHE, during driver initialization. Once all pre-cache shm objects are removed, proceed with enabling the cache so that we know that we can handle cached shm objects with confidence later in the .shutdown hook. Cc: stable@vger.kernel.org Signed-off-by: Tyler Hicks Reviewed-by: Jens Wiklander Reviewed-by: Sumit Garg Signed-off-by: Jens Wiklander Signed-off-by: Greg Kroah-Hartman commit c0add455ae992b53b0d52cd4d8682528b4014c42 Author: Steven Rostedt (VMware) Date: Wed Jul 21 11:00:53 2021 -0400 tracing/histogram: Rename "cpu" to "common_cpu" commit 1e3bac71c5053c99d438771fc9fa5082ae5d90aa upstream. Currently the histogram logic allows the user to write "cpu" in as an event field, and it will record the CPU that the event happened on. The problem with this is that there's a lot of events that have "cpu" as a real field, and using "cpu" as the CPU it ran on, makes it impossible to run histograms on the "cpu" field of events. For example, if I want to have a histogram on the count of the workqueue_queue_work event on its cpu field, running: ># echo 'hist:keys=cpu' > events/workqueue/workqueue_queue_work/trigger Gives a misleading and wrong result. Change the command to "common_cpu" as no event should have "common_*" fields as that's a reserved name for fields used by all events. And this makes sense here as common_cpu would be a field used by all events. Now we can even do: ># echo 'hist:keys=common_cpu,cpu if cpu < 100' > events/workqueue/workqueue_queue_work/trigger ># cat events/workqueue/workqueue_queue_work/hist # event histogram # # trigger info: hist:keys=common_cpu,cpu:vals=hitcount:sort=hitcount:size=2048 if cpu < 100 [active] # { common_cpu: 0, cpu: 2 } hitcount: 1 { common_cpu: 0, cpu: 4 } hitcount: 1 { common_cpu: 7, cpu: 7 } hitcount: 1 { common_cpu: 0, cpu: 7 } hitcount: 1 { common_cpu: 0, cpu: 1 } hitcount: 1 { common_cpu: 0, cpu: 6 } hitcount: 2 { common_cpu: 0, cpu: 5 } hitcount: 2 { common_cpu: 1, cpu: 1 } hitcount: 4 { common_cpu: 6, cpu: 6 } hitcount: 4 { common_cpu: 5, cpu: 5 } hitcount: 14 { common_cpu: 4, cpu: 4 } hitcount: 26 { common_cpu: 0, cpu: 0 } hitcount: 39 { common_cpu: 2, cpu: 2 } hitcount: 184 Now for backward compatibility, I added a trick. If "cpu" is used, and the field is not found, it will fall back to "common_cpu" and work as it did before. This way, it will still work for old programs that use "cpu" to get the actual CPU, but if the event has a "cpu" as a field, it will get that event's "cpu" field, which is probably what it wants anyway. I updated the tracefs/README to include documentation about both the common_timestamp and the common_cpu. This way, if that text is present in the README, then an application can know that common_cpu is supported over just plain "cpu". Link: https://lkml.kernel.org/r/20210721110053.26b4f641@oasis.local.home Cc: Namhyung Kim Cc: Ingo Molnar Cc: Andrew Morton Cc: stable@vger.kernel.org Fixes: 8b7622bf94a44 ("tracing: Add cpu field for hist triggers") Reviewed-by: Tom Zanussi Reviewed-by: Masami Hiramatsu Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman commit 43cba13ff1e793c0e1e1e317c951dea63710290e Author: Steven Rostedt (VMware) Date: Fri Jul 30 17:19:51 2021 -0400 tracing / histogram: Give calculation hist_fields a size commit 2c05caa7ba8803209769b9e4fe02c38d77ae88d0 upstream. When working on my user space applications, I found a bug in the synthetic event code where the automated synthetic event field was not matching the event field calculation it was attached to. Looking deeper into it, it was because the calculation hist_field was not given a size. The synthetic event fields are matched to their hist_fields either by having the field have an identical string type, or if that does not match, then the size and signed values are used to match the fields. The problem arose when I tried to match a calculation where the fields were "unsigned int". My tool created a synthetic event of type "u32". But it failed to match. The string was: diff=field1-field2:onmatch(event).trace(synth,$diff) Adding debugging into the kernel, I found that the size of "diff" was 0. And since it was given "unsigned int" as a type, the histogram fallback code used size and signed. The signed matched, but the size of u32 (4) did not match zero, and the event failed to be created. This can be worse if the field you want to match is not one of the acceptable fields for a synthetic event. As event fields can have any type that is supported in Linux, this can cause an issue. For example, if a type is an enum. Then there's no way to use that with any calculations. Have the calculation field simply take on the size of what it is calculating. Link: https://lkml.kernel.org/r/20210730171951.59c7743f@oasis.local.home Cc: Tom Zanussi Cc: Masami Hiramatsu Cc: Namhyung Kim Cc: Ingo Molnar Cc: Andrew Morton Cc: stable@vger.kernel.org Fixes: 100719dcef447 ("tracing: Add simple expression support to hist triggers") Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman commit 2ee3c5f196b0f8144d213700879fec840a2576e2 Author: Hui Su Date: Fri Jun 11 10:21:07 2021 +0800 scripts/tracing: fix the bug that can't parse raw_trace_func commit 1c0cec64a7cc545eb49f374a43e9f7190a14defa upstream. Since commit 77271ce4b2c0 ("tracing: Add irq, preempt-count and need resched info to default trace output"), the default trace output format has been changed to: -0 [009] d.h. 22420.068695: _raw_spin_lock_irqsave <-hrtimer_interrupt -0 [000] ..s. 22420.068695: _nohz_idle_balance <-run_rebalance_domains -0 [011] d.h. 22420.068695: account_process_tick <-update_process_times origin trace output format:(before v3.2.0) # tracer: nop # # TASK-PID CPU# TIMESTAMP FUNCTION # | | | | | migration/0-6 [000] 50.025810: rcu_note_context_switch <-__schedule migration/0-6 [000] 50.025812: trace_rcu_utilization <-rcu_note_context_switch migration/0-6 [000] 50.025813: rcu_sched_qs <-rcu_note_context_switch migration/0-6 [000] 50.025815: rcu_preempt_qs <-rcu_note_context_switch migration/0-6 [000] 50.025817: trace_rcu_utilization <-rcu_note_context_switch migration/0-6 [000] 50.025818: debug_lockdep_rcu_enabled <-__schedule migration/0-6 [000] 50.025820: debug_lockdep_rcu_enabled <-__schedule The draw_functrace.py(introduced in v2.6.28) can't parse the new version format trace_func, So we need modify draw_functrace.py to adapt the new version trace output format. Link: https://lkml.kernel.org/r/20210611022107.608787-1-suhui@zeku.com Cc: stable@vger.kernel.org Fixes: 77271ce4b2c0 tracing: Add irq, preempt-count and need resched info to default trace output Signed-off-by: Hui Su Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman commit 4549564ca1dbf81fb63a7dfaeeaaa482931c0cfe Author: Dmitry Osipenko Date: Sat Jul 17 21:21:27 2021 +0300 usb: otg-fsm: Fix hrtimer list corruption commit bf88fef0b6f1488abeca594d377991171c00e52a upstream. The HNP work can be re-scheduled while it's still in-fly. This results in re-initialization of the busy work, resetting the hrtimer's list node of the work and crashing kernel with null dereference within kernel/timer once work's timer is expired. It's very easy to trigger this problem by re-plugging USB cable quickly. Initialize HNP work only once to fix this trouble. Unable to handle kernel NULL pointer dereference at virtual address 00000126) ... PC is at __run_timers.part.0+0x150/0x228 LR is at __next_timer_interrupt+0x51/0x9c ... (__run_timers.part.0) from [] (run_timer_softirq+0x2f/0x50) (run_timer_softirq) from [] (__do_softirq+0xd5/0x2f0) (__do_softirq) from [] (irq_exit+0xab/0xb8) (irq_exit) from [] (handle_domain_irq+0x45/0x60) (handle_domain_irq) from [] (gic_handle_irq+0x6b/0x7c) (gic_handle_irq) from [] (__irq_svc+0x65/0xac) Cc: stable@vger.kernel.org Acked-by: Peter Chen Signed-off-by: Dmitry Osipenko Link: https://lore.kernel.org/r/20210717182134.30262-6-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 8b575d820ddac2e959acc9575c55a5d5272fbcee Author: Maxim Devaev Date: Tue Jul 27 21:58:00 2021 +0300 usb: gadget: f_hid: idle uses the highest byte for duration commit fa20bada3f934e3b3e4af4c77e5b518cd5a282e5 upstream. SET_IDLE value must be shifted 8 bits to the right to get duration. This confirmed by USBCV test. Fixes: afcff6dc690e ("usb: gadget: f_hid: added GET_IDLE and SET_IDLE handlers") Cc: stable Signed-off-by: Maxim Devaev Link: https://lore.kernel.org/r/20210727185800.43796-1-mdevaev@gmail.com Signed-off-by: Greg Kroah-Hartman commit 1071804cc89e984e0d2c966e890fd37f77a8e951 Author: Phil Elwell Date: Fri Jul 23 18:59:30 2021 +0300 usb: gadget: f_hid: fixed NULL pointer dereference commit 2867652e4766360adf14dfda3832455e04964f2a upstream. Disconnecting and reconnecting the USB cable can lead to crashes and a variety of kernel log spam. The problem was found and reproduced on the Raspberry Pi [1] and the original fix was created in Raspberry's own fork [2]. Link: https://github.com/raspberrypi/linux/issues/3870 [1] Link: https://github.com/raspberrypi/linux/commit/a6e47d5f4efbd2ea6a0b6565cd2f9b7bb217ded5 [2] Signed-off-by: Maxim Devaev Signed-off-by: Phil Elwell Cc: stable Link: https://lore.kernel.org/r/20210723155928.210019-1-mdevaev@gmail.com Signed-off-by: Greg Kroah-Hartman commit 92bb8520970470028aab5a1ea7875a798d2ba4c8 Author: Maxim Devaev Date: Wed Jul 21 21:03:51 2021 +0300 usb: gadget: f_hid: added GET_IDLE and SET_IDLE handlers commit afcff6dc690e24d636a41fd4bee6057e7c70eebd upstream. The USB HID standard declares mandatory support for GET_IDLE and SET_IDLE requests for Boot Keyboard. Most hosts can handle their absence, but others like some old/strange UEFIs and BIOSes consider this a critical error and refuse to work with f_hid. This primitive implementation of saving and returning idle is sufficient to meet the requirements of the standard and these devices. Acked-by: Felipe Balbi Cc: stable Signed-off-by: Maxim Devaev Link: https://lore.kernel.org/r/20210721180351.129450-1-mdevaev@gmail.com Signed-off-by: Greg Kroah-Hartman commit 6d55383c699ad771e551835a8dce2197fdfc8cad Author: Alexander Tsoy Date: Tue Jul 27 12:33:26 2021 +0300 ALSA: usb-audio: Add registration quirk for JBL Quantum 600 commit 4b0556b96e1fe7723629bd40e3813a30cd632faf upstream. Apparently JBL Quantum 600 has multiple hardware revisions. Apply registration quirk to another device id as well. Signed-off-by: Alexander Tsoy Cc: Link: https://lore.kernel.org/r/20210727093326.1153366-1-alexander@tsoy.me Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 67cf0fbcac0d42d4d4686cddc1e39f465bbfec37 Author: Anirudh Rayabharam Date: Wed Jul 28 14:21:07 2021 +0530 firmware_loader: fix use-after-free in firmware_fallback_sysfs commit 75d95e2e39b27f733f21e6668af1c9893a97de5e upstream. This use-after-free happens when a fw_priv object has been freed but hasn't been removed from the pending list (pending_fw_head). The next time fw_load_sysfs_fallback tries to insert into the list, it ends up accessing the pending_list member of the previously freed fw_priv. The root cause here is that all code paths that abort the fw load don't delete it from the pending list. For example: _request_firmware() -> fw_abort_batch_reqs() -> fw_state_aborted() To fix this, delete the fw_priv from the list in __fw_set_state() if the new state is DONE or ABORTED. This way, all aborts will remove the fw_priv from the list. Accordingly, remove calls to list_del_init that were being made before calling fw_state_(aborted|done). Also, in fw_load_sysfs_fallback, don't add the fw_priv to the pending list if it is already aborted. Instead, just jump out and return early. Fixes: bcfbd3523f3c ("firmware: fix a double abort case with fw_load_sysfs_fallback") Cc: stable Reported-by: syzbot+de271708674e2093097b@syzkaller.appspotmail.com Tested-by: syzbot+de271708674e2093097b@syzkaller.appspotmail.com Reviewed-by: Shuah Khan Acked-by: Luis Chamberlain Signed-off-by: Anirudh Rayabharam Link: https://lore.kernel.org/r/20210728085107.4141-3-mail@anirudhrb.com Signed-off-by: Greg Kroah-Hartman commit ce699ac03ec0e41347363e1cf0924669f5449e34 Author: Anirudh Rayabharam Date: Wed Jul 28 14:21:06 2021 +0530 firmware_loader: use -ETIMEDOUT instead of -EAGAIN in fw_load_sysfs_fallback commit 0d6434e10b5377a006f6dd995c8fc5e2d82acddc upstream. The only motivation for using -EAGAIN in commit 0542ad88fbdd81bb ("firmware loader: Fix _request_firmware_load() return val for fw load abort") was to distinguish the error from -ENOMEM, and so there is no real reason in keeping it. -EAGAIN is typically used to tell the userspace to try something again and in this case re-using the sysfs loading interface cannot be retried when a timeout happens, so the return value is also bogus. -ETIMEDOUT is received when the wait times out and returning that is much more telling of what the reason for the failure was. So, just propagate that instead of returning -EAGAIN. Suggested-by: Luis Chamberlain Reviewed-by: Shuah Khan Acked-by: Luis Chamberlain Signed-off-by: Anirudh Rayabharam Cc: stable Link: https://lore.kernel.org/r/20210728085107.4141-2-mail@anirudhrb.com Signed-off-by: Greg Kroah-Hartman commit c660c337e846be1be897e2d71c3ebbf1763743cb Author: David Bauer Date: Thu Aug 5 01:25:22 2021 +0200 USB: serial: ftdi_sio: add device ID for Auto-M3 OP-COM v2 commit 8da0e55c7988ef9f08a708c38e5c75ecd8862cf8 upstream. The Auto-M3 OP-COM v2 is a OBD diagnostic device using a FTD232 for the USB connection. Signed-off-by: David Bauer Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit d5008c3e90a9b39dd6a2b05edc0c293eda58dd2b Author: Willy Tarreau Date: Sat Jul 24 17:27:39 2021 +0200 USB: serial: ch341: fix character loss at high transfer rates commit 3c18e9baee0ef97510dcda78c82285f52626764b upstream. The chip supports high transfer rates, but with the small default buffers (64 bytes read), some entire blocks are regularly lost. This typically happens at 1.5 Mbps (which is the default speed on Rockchip devices) when used as a console to access U-Boot where the output of the "help" command misses many lines and where "printenv" mangles the environment. The FTDI driver doesn't suffer at all from this. One difference is that it uses 512 bytes rx buffers and 256 bytes tx buffers. Adopting these values completely resolved the issue, even the output of "dmesg" is reliable. I preferred to leave the Tx value unchanged as it is not involved in this issue, while a change could increase the risk of triggering the same issue with other devices having too small buffers. I verified that it backports well (and works) at least to 5.4. It's of low importance enough to be dropped where it doesn't trivially apply anymore. Cc: stable@vger.kernel.org Signed-off-by: Willy Tarreau Link: https://lore.kernel.org/r/20210724152739.18726-1-w@1wt.eu Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 67a377163fea67e9140e0ac67fb3d85ab5ced613 Author: Daniele Palmas Date: Tue Aug 3 21:47:11 2021 +0200 USB: serial: option: add Telit FD980 composition 0x1056 commit 5648c073c33d33a0a19d0cb1194a4eb88efe2b71 upstream. Add the following Telit FD980 composition 0x1056: Cfg #1: mass storage Cfg #2: rndis, tty, adb, tty, tty, tty, tty Signed-off-by: Daniele Palmas Link: https://lore.kernel.org/r/20210803194711.3036-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 08433a2b5b0d3975feac4c6b50b02e8c47b74948 Author: Qiang.zhang Date: Fri Jul 23 08:43:34 2021 +0800 USB: usbtmc: Fix RCU stall warning commit 30fad76ce4e98263edfa8f885c81d5426c1bf169 upstream. rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 1-...!: (2 ticks this GP) idle=d92/1/0x4000000000000000 softirq=25390/25392 fqs=3 (t=12164 jiffies g=31645 q=43226) rcu: rcu_preempt kthread starved for 12162 jiffies! g31645 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=0 rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior. rcu: RCU grace-period kthread stack dump: task:rcu_preempt state:R running task ........... usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: usb_submit_urb failed: -19 The function usbtmc_interrupt() resubmits urbs when the error status of an urb is -EPROTO. In systems using the dummy_hcd usb controller this can result in endless interrupt loops when the usbtmc device is disconnected from the host system. Since host controller drivers already try to recover from transmission errors, there is no need to resubmit the urb or try other solutions to repair the error situation. In case of errors the INT pipe just stops to wait for further packets. Fixes: dbf3e7f654c0 ("Implement an ioctl to support the USMTMC-USB488 READ_STATUS_BYTE operation") Cc: stable@vger.kernel.org Reported-by: syzbot+e2eae5639e7203360018@syzkaller.appspotmail.com Signed-off-by: Qiang.zhang Acked-by: Guido Kiener Link: https://lore.kernel.org/r/20210723004334.458930-1-qiang.zhang@windriver.com Signed-off-by: Greg Kroah-Hartman commit 3719acc161d5c1ce09912cc1c9eddc2c5faa3c66 Author: Tetsuo Handa Date: Wed Aug 4 19:26:56 2021 +0900 Bluetooth: defer cleanup of resources in hci_unregister_dev() [ Upstream commit e04480920d1eec9c061841399aa6f35b6f987d8b ] syzbot is hitting might_sleep() warning at hci_sock_dev_event() due to calling lock_sock() with rw spinlock held [1]. It seems that history of this locking problem is a trial and error. Commit b40df5743ee8 ("[PATCH] bluetooth: fix socket locking in hci_sock_dev_event()") in 2.6.21-rc4 changed bh_lock_sock() to lock_sock() as an attempt to fix lockdep warning. Then, commit 4ce61d1c7a8e ("[BLUETOOTH]: Fix locking in hci_sock_dev_event().") in 2.6.22-rc2 changed lock_sock() to local_bh_disable() + bh_lock_sock_nested() as an attempt to fix the sleep in atomic context warning. Then, commit 4b5dd696f81b ("Bluetooth: Remove local_bh_disable() from hci_sock.c") in 3.3-rc1 removed local_bh_disable(). Then, commit e305509e678b ("Bluetooth: use correct lock to prevent UAF of hdev object") in 5.13-rc5 again changed bh_lock_sock_nested() to lock_sock() as an attempt to fix CVE-2021-3573. This difficulty comes from current implementation that hci_sock_dev_event(HCI_DEV_UNREG) is responsible for dropping all references from sockets because hci_unregister_dev() immediately reclaims resources as soon as returning from hci_sock_dev_event(HCI_DEV_UNREG). But the history suggests that hci_sock_dev_event(HCI_DEV_UNREG) was not doing what it should do. Therefore, instead of trying to detach sockets from device, let's accept not detaching sockets from device at hci_sock_dev_event(HCI_DEV_UNREG), by moving actual cleanup of resources from hci_unregister_dev() to hci_cleanup_dev() which is called by bt_host_release() when all references to this unregistered device (which is a kobject) are gone. Since hci_sock_dev_event(HCI_DEV_UNREG) no longer resets hci_pi(sk)->hdev, we need to check whether this device was unregistered and return an error based on HCI_UNREGISTER flag. There might be subtle behavioral difference in "monitor the hdev" functionality; please report if you found something went wrong due to this patch. Link: https://syzkaller.appspot.com/bug?extid=a5df189917e79d5e59c9 [1] Reported-by: syzbot Suggested-by: Linus Torvalds Signed-off-by: Tetsuo Handa Fixes: e305509e678b ("Bluetooth: use correct lock to prevent UAF of hdev object") Acked-by: Luiz Augusto von Dentz Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit 76ab02d9b861da0785176f0228340f22023902fa Author: Yu Kuai Date: Thu Aug 5 20:46:45 2021 +0800 blk-iolatency: error out if blk_get_queue() failed in iolatency_set_limit() [ Upstream commit 8d75d0eff6887bcac7225e12b9c75595e523d92d ] If queue is dying while iolatency_set_limit() is in progress, blk_get_queue() won't increment the refcount of the queue. However, blk_put_queue() will still decrement the refcount later, which will cause the refcout to be unbalanced. Thus error out in such case to fix the problem. Fixes: 8c772a9bfc7c ("blk-iolatency: fix IO hang due to negative inflight counter") Signed-off-by: Yu Kuai Acked-by: Tejun Heo Link: https://lore.kernel.org/r/20210805124645.543797-1-yukuai3@huawei.com Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit 92c8d9aebe575f2a44a875cbdcd98c93594473af Author: Pavel Skripkin Date: Wed Aug 4 18:52:20 2021 +0300 net: vxge: fix use-after-free in vxge_device_unregister [ Upstream commit 942e560a3d3862dd5dee1411dbdd7097d29b8416 ] Smatch says: drivers/net/ethernet/neterion/vxge/vxge-main.c:3518 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev); drivers/net/ethernet/neterion/vxge/vxge-main.c:3518 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev); drivers/net/ethernet/neterion/vxge/vxge-main.c:3520 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev); drivers/net/ethernet/neterion/vxge/vxge-main.c:3520 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev); Since vdev pointer is netdev private data accessing it after free_netdev() call can cause use-after-free bug. Fix it by moving free_netdev() call at the end of the function Fixes: 6cca200362b4 ("vxge: cleanup probe error paths") Reported-by: Dan Carpenter Signed-off-by: Pavel Skripkin Reviewed-by: Jesse Brandeburg Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit bfee67c40873f47b2b4c4c7ea56cc9170e18daad Author: Pavel Skripkin Date: Wed Aug 4 18:51:51 2021 +0300 net: fec: fix use-after-free in fec_drv_remove [ Upstream commit 44712965bf12ae1758cec4de53816ed4b914ca1a ] Smatch says: drivers/net/ethernet/freescale/fec_main.c:3994 fec_drv_remove() error: Using fep after free_{netdev,candev}(ndev); drivers/net/ethernet/freescale/fec_main.c:3995 fec_drv_remove() error: Using fep after free_{netdev,candev}(ndev); Since fep pointer is netdev private data, accessing it after free_netdev() call can cause use-after-free bug. Fix it by moving free_netdev() call at the end of the function Reported-by: Dan Carpenter Fixes: a31eda65ba21 ("net: fec: fix clock count mis-match") Signed-off-by: Pavel Skripkin Reviewed-by: Joakim Zhang Reviewed-by: Jesse Brandeburg Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 423cbae7ee2a70ea8dd0bc129aa3aa32c54e0f12 Author: Pavel Skripkin Date: Wed Aug 4 17:30:05 2021 +0300 net: pegasus: fix uninit-value in get_interrupt_interval [ Upstream commit af35fc37354cda3c9c8cc4961b1d24bdc9d27903 ] Syzbot reported uninit value pegasus_probe(). The problem was in missing error handling. get_interrupt_interval() internally calls read_eprom_word() which can fail in some cases. For example: failed to receive usb control message. These cases should be handled to prevent uninit value bug, since read_eprom_word() will not initialize passed stack variable in case of internal failure. Fail log: BUG: KMSAN: uninit-value in get_interrupt_interval drivers/net/usb/pegasus.c:746 [inline] BUG: KMSAN: uninit-value in pegasus_probe+0x10e7/0x4080 drivers/net/usb/pegasus.c:1152 CPU: 1 PID: 825 Comm: kworker/1:1 Not tainted 5.12.0-rc6-syzkaller #0 ... Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x24c/0x2e0 lib/dump_stack.c:120 kmsan_report+0xfb/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x5c/0xa0 mm/kmsan/kmsan_instr.c:197 get_interrupt_interval drivers/net/usb/pegasus.c:746 [inline] pegasus_probe+0x10e7/0x4080 drivers/net/usb/pegasus.c:1152 .... Local variable ----data.i@pegasus_probe created at: get_interrupt_interval drivers/net/usb/pegasus.c:1151 [inline] pegasus_probe+0xe57/0x4080 drivers/net/usb/pegasus.c:1152 get_interrupt_interval drivers/net/usb/pegasus.c:1151 [inline] pegasus_probe+0xe57/0x4080 drivers/net/usb/pegasus.c:1152 Reported-and-tested-by: syzbot+02c9f70f3afae308464a@syzkaller.appspotmail.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Pavel Skripkin Link: https://lore.kernel.org/r/20210804143005.439-1-paskripkin@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 836e2fd208c87ab00d843cbe4cec884ba0895158 Author: Dan Carpenter Date: Thu Aug 5 13:38:26 2021 +0300 bnx2x: fix an error code in bnx2x_nic_load() [ Upstream commit fb653827c758725b149b5c924a5eb50ab4812750 ] Set the error code if bnx2x_alloc_fw_stats_mem() fails. The current code returns success. Fixes: ad5afc89365e ("bnx2x: Separate VF and PF logic") Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 273a38908f0ce411f4cc61212233c0fbc089757c Author: H. Nikolaus Schaller Date: Thu Jul 8 10:57:10 2021 +0200 mips: Fix non-POSIX regexp [ Upstream commit 28bbbb9875a35975904e46f9b06fa689d051b290 ] When cross compiling a MIPS kernel on a BSD based HOSTCC leads to errors like SYNC include/config/auto.conf.cmd - due to: .config egrep: empty (sub)expression UPD include/config/kernel.release HOSTCC scripts/dtc/dtc.o - due to target missing It turns out that egrep uses this egrep pattern: (|MINOR_|PATCHLEVEL_) This is not valid syntax or gives undefined results according to POSIX 9.5.3 ERE Grammar https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap09.html It seems to be silently accepted by the Linux egrep implementation while a BSD host complains. Such patterns can be replaced by a transformation like "(|p1|p2)" -> "(p1|p2)?" Fixes: 48c35b2d245f ("[MIPS] There is no __GNUC_MAJOR__") Signed-off-by: H. Nikolaus Schaller Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin commit 08882fba72a9be9446d744c60d6d418f547a0c96 Author: Antoine Tenart Date: Tue Aug 3 12:00:16 2021 +0200 net: ipv6: fix returned variable type in ip6_skb_dst_mtu [ Upstream commit 4039146777a91e1576da2bf38e0d8a1061a1ae47 ] The patch fixing the returned value of ip6_skb_dst_mtu (int -> unsigned int) was rebased between its initial review and the version applied. In the meantime fade56410c22 was applied, which added a new variable (int) used as the returned value. This lead to a mismatch between the function prototype and the variable used as the return value. Fixes: 40fc3054b458 ("net: ipv6: fix return value of ip6_skb_dst_mtu") Cc: Vadim Fedorenko Signed-off-by: Antoine Tenart Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 264216f8837a6ac690377c3118144de7f07e801b Author: Fei Qin Date: Tue Aug 3 12:39:11 2021 +0200 nfp: update ethtool reporting of pauseframe control [ Upstream commit 9fdc5d85a8fe684cdf24dc31c6bc4a727decfe87 ] Pauseframe control is set to symmetric mode by default on the NFP. Pause frames can not be configured through ethtool now, but ethtool can report the supported mode. Fixes: 265aeb511bd5 ("nfp: add support for .get_link_ksettings()") Signed-off-by: Fei Qin Signed-off-by: Louis Peens Signed-off-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit f91e7bd934c705f25dc6651e29e9c857d48a51f4 Author: Xin Long Date: Sun Aug 1 02:25:31 2021 -0400 sctp: move the active_key update after sh_keys is added [ Upstream commit ae954bbc451d267f7d60d7b49db811d5a68ebd7b ] In commit 58acd1009226 ("sctp: update active_key for asoc when old key is being replaced"), sctp_auth_asoc_init_active_key() is called to update the active_key right after the old key is deleted and before the new key is added, and it caused that the active_key could be found with the key_id. In Ying Xu's testing, the BUG_ON in sctp_auth_asoc_init_active_key() was triggered: [ ] kernel BUG at net/sctp/auth.c:416! [ ] RIP: 0010:sctp_auth_asoc_init_active_key.part.8+0xe7/0xf0 [sctp] [ ] Call Trace: [ ] sctp_auth_set_key+0x16d/0x1b0 [sctp] [ ] sctp_setsockopt.part.33+0x1ba9/0x2bd0 [sctp] [ ] __sys_setsockopt+0xd6/0x1d0 [ ] __x64_sys_setsockopt+0x20/0x30 [ ] do_syscall_64+0x5b/0x1a0 So fix it by moving the active_key update after sh_keys is added. Fixes: 58acd1009226 ("sctp: update active_key for asoc when old key is being replaced") Reported-by: Ying Xu Signed-off-by: Xin Long Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 9309cd087b4d9dbb40395d37e5ea2072422a1b95 Author: Wang Hai Date: Sat Jul 31 14:38:01 2021 +0800 net: natsemi: Fix missing pci_disable_device() in probe and remove [ Upstream commit 7fe74dfd41c428afb24e2e615470832fa997ff14 ] Replace pci_enable_device() with pcim_enable_device(), pci_disable_device() and pci_release_regions() will be called in release automatically. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Hulk Robot Signed-off-by: Wang Hai Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit a351cafd536e9fa8a8d16c7749af97325b6a1fa3 Author: Hans Verkuil Date: Wed Jun 30 09:58:23 2021 +0200 media: videobuf2-core: dequeue if start_streaming fails [ Upstream commit c592b46907adbeb81243f7eb7a468c36692658b8 ] If a vb2_queue sets q->min_buffers_needed then when the number of queued buffers reaches q->min_buffers_needed, vb2_core_qbuf() will call the start_streaming() callback. If start_streaming() returns an error, then that error was just returned by vb2_core_qbuf(), but the buffer was still queued. However, userspace expects that if VIDIOC_QBUF fails, the buffer is returned dequeued. So if start_streaming() fails, then remove the buffer from the queue, thus avoiding this unwanted side-effect. Signed-off-by: Hans Verkuil Reviewed-by: Laurent Pinchart Tested-by: Kieran Bingham Fixes: b3379c6201bb ("[media] vb2: only call start_streaming if sufficient buffers are queued") Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit 489492b5a81f0f6de1ffa246e4183e479298fd2b Author: Li Manyi Date: Mon Jul 26 19:49:13 2021 +0800 scsi: sr: Return correct event when media event code is 3 [ Upstream commit 5c04243a56a7977185b00400e59ca7e108004faf ] Media event code 3 is defined in the MMC-6 spec as follows: "MediaRemoval: The media has been removed from the specified slot, and the Drive is unable to access the media without user intervention. This applies to media changers only." This indicated that treating the condition as an EJECT_REQUEST was appropriate. However, doing so had the unfortunate side-effect of causing the drive tray to be physically ejected on resume. Instead treat the event as a MEDIA_CHANGE request. Fixes: 7dd753ca59d6 ("scsi: sr: Return appropriate error code when disk is ejected") Link: https://bugzilla.kernel.org/show_bug.cgi?id=213759 Link: https://lore.kernel.org/r/20210726114913.6760-1-limanyi@uniontech.com Signed-off-by: Li Manyi Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit a6af9385fe59c73b60df6842d96059cff7151e31 Author: H. Nikolaus Schaller Date: Thu Jul 1 16:00:22 2021 +0200 omap5-board-common: remove not physically existing vdds_1v8_main fixed-regulator [ Upstream commit c68ef4ad180e09805fa46965d15e1dfadf09ffa5 ] This device tree include file describes a fixed-regulator connecting smps7_reg output (1.8V) to some 1.8V rail and consumers (vdds_1v8_main). This regulator does not physically exist. I assume it was introduced as a wrapper around smps7_reg to provide a speaking signal name "vdds_1v8_main" as label. This fixed-regulator without real function was not an issue in driver code until Commit 98e48cd9283d ("regulator: core: resolve supply for boot-on/always-on regulators") introduced a new check for regulator initialization which makes Palmas regulator registration fail: [ 5.407712] ldo1: supplied by vsys_cobra [ 5.412748] ldo2: supplied by vsys_cobra [ 5.417603] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator The reason is that the supply-chain of regulators is too long and goes from ldo3 through the virtual vdds_1v8_main regulator and then back to smps7. This adds a cross-dependency of probing Palmas regulators and the fixed-regulator which leads to probe deferral by the new check and is no longer resolved. Since we do not control what device tree files including this one reference (either &vdds_1v8_main or &smps7_reg or both) we keep both labels for smps7 for compatibility. Fixes: 98e48cd9283d ("regulator: core: resolve supply for boot-on/always-on regulators") Signed-off-by: H. Nikolaus Schaller Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin commit 82ff713e72b5eeb97312cd7944159ba55934963a Author: Dario Binacchi Date: Sun Jul 25 18:07:25 2021 +0200 clk: stm32f4: fix post divisor setup for I2S/SAI PLLs [ Upstream commit 24b5b1978cd5a80db58e2a19db2f9c36fe8d4f7a ] Enabling the framebuffer leads to a system hang. Running, as a debug hack, the store_pan() function in drivers/video/fbdev/core/fbsysfs.c without taking the console_lock, allows to see the crash backtrace on the serial line. ~ # echo 0 0 > /sys/class/graphics/fb0/pan [ 9.719414] Unhandled exception: IPSR = 00000005 LR = fffffff1 [ 9.726937] CPU: 0 PID: 49 Comm: sh Not tainted 5.13.0-rc5 #9 [ 9.733008] Hardware name: STM32 (Device Tree Support) [ 9.738296] PC is at clk_gate_is_enabled+0x0/0x28 [ 9.743426] LR is at stm32f4_pll_div_set_rate+0xf/0x38 [ 9.748857] pc : [<0011e4be>] lr : [<0011f9e3>] psr: 0100000b [ 9.755373] sp : 00bc7be0 ip : 00000000 fp : 001f3ac4 [ 9.760812] r10: 002610d0 r9 : 01efe920 r8 : 00540560 [ 9.766269] r7 : 02e7ddb0 r6 : 0173eed8 r5 : 00000000 r4 : 004027c0 [ 9.773081] r3 : 0011e4bf r2 : 02e7ddb0 r1 : 0173eed8 r0 : 1d3267b8 [ 9.779911] xPSR: 0100000b [ 9.782719] CPU: 0 PID: 49 Comm: sh Not tainted 5.13.0-rc5 #9 [ 9.788791] Hardware name: STM32 (Device Tree Support) [ 9.794120] [<0000afa1>] (unwind_backtrace) from [<0000a33f>] (show_stack+0xb/0xc) [ 9.802421] [<0000a33f>] (show_stack) from [<0000a8df>] (__invalid_entry+0x4b/0x4c) The `pll_num' field in the post_div_data configuration contained a wrong value which also referenced an uninitialized hardware clock when clk_register_pll_div() was called. Fixes: 517633ef630e ("clk: stm32f4: Add post divisor for I2S & SAI PLLs") Signed-off-by: Dario Binacchi Reviewed-by: Gabriel Fernandez Link: https://lore.kernel.org/r/20210725160725.10788-1-dariobin@libero.it Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin commit cb6c9448a5c85135b8553bd28643b42cb05745d9 Author: chihhao.chen Date: Sat Jul 24 12:23:41 2021 +0800 ALSA: usb-audio: fix incorrect clock source setting [ Upstream commit 4511781f95da0a3b2bad34f3f5e3967e80cd2d18 ] The following scenario describes an echo test for Samsung USBC Headset (AKG) with VID/PID (0x04e8/0xa051). We first start a capture stream(USB IN transfer) in 96Khz/24bit/1ch mode. In clock find source function, we get value 0x2 for clock selector and 0x1 for clock source. Kernel-4.14 behavior Since clock source is valid so clock selector was not set again. We pass through this function and start a playback stream(USB OUT transfer) in 48Khz/32bit/2ch mode. This time we get value 0x1 for clock selector and 0x1 for clock source. Finally clock id with this setting is 0x9. Kernel-5.10 behavior Clock selector was always set one more time even it is valid. When we start a playback stream, we will get 0x2 for clock selector and 0x1 for clock source. In this case clock id becomes 0xA. This is an incorrect clock source setting and results in severe noises. We see wrong data rate in USB IN transfer. (From 288 bytes/ms becomes 144 bytes/ms) It should keep in 288 bytes/ms. This earphone works fine on older kernel version load because this is a newly-added behavior. Fixes: d2e8f641257d ("ALSA: usb-audio: Explicitly set up the clock selector") Signed-off-by: chihhao.chen Link: https://lore.kernel.org/r/1627100621-19225-1-git-send-email-chihhao.chen@mediatek.com Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit c22aabdfb7c358cc8c9df970994a3c8f455f7ca9 Author: Oleksandr Suvorov Date: Tue Jul 13 23:21:07 2021 +0300 ARM: dts: colibri-imx6ull: limit SDIO clock to 25MHz [ Upstream commit 828db68f4ff1ab6982a36a56522b585160dc8c8e ] NXP and AzureWave don't recommend using SDIO bus mode 3.3V@50MHz due to noise affecting the wireless throughput. Colibri iMX6ULL uses only 3.3V signaling for Wi-Fi module AW-CM276NF. Limit the SDIO Clock on Colibri iMX6ULL to 25MHz. Fixes: c2e4987e0e02 ("ARM: dts: imx6ull: add Toradex Colibri iMX6ULL support") Signed-off-by: Oleksandr Suvorov Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin commit ba5b3733e026e0b54c98dac28874a510ef10adf5 Author: Yang Yingliang Date: Tue Jun 15 20:52:38 2021 +0800 ARM: imx: add missing iounmap() [ Upstream commit f9613aa07f16d6042e74208d1b40a6104d72964a ] Commit e76bdfd7403a ("ARM: imx: Added perf functionality to mmdc driver") introduced imx_mmdc_remove(), the mmdc_base need be unmapped in it if config PERF_EVENTS is enabled. If imx_mmdc_perf_init() fails, the mmdc_base also need be unmapped. Fixes: e76bdfd7403a ("ARM: imx: Added perf functionality to mmdc driver") Reported-by: Hulk Robot Signed-off-by: Yang Yingliang Reviewed-by: Dong Aisheng Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin commit a61a98bbff14d8dcd767b17b0b6d18d0d65116be Author: Takashi Iwai Date: Tue Aug 3 13:43:12 2021 +0200 ALSA: seq: Fix racy deletion of subscriber commit 97367c97226aab8b298ada954ce12659ee3ad2a4 upstream. It turned out that the current implementation of the port subscription is racy. The subscription contains two linked lists, and we have to add to or delete from both lists. Since both connection and disconnection procedures perform the same order for those two lists (i.e. src list, then dest list), when a deletion happens during a connection procedure, the src list may be deleted before the dest list addition completes, and this may lead to a use-after-free or an Oops, even though the access to both lists are protected via mutex. The simple workaround for this race is to change the access order for the disconnection, namely, dest list, then src list. This assures that the connection has been established when disconnecting, and also the concurrent deletion can be avoided. Reported-and-tested-by: folkert Cc: Link: https://lore.kernel.org/r/20210801182754.GP890690@belle.intranet.vanheusden.com Link: https://lore.kernel.org/r/20210803114312.2536-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 87db7214e292d6b53e2068311c090acad47ad272 Author: Rafael J. Wysocki Date: Tue Aug 3 18:14:44 2021 +0200 Revert "ACPICA: Fix memory leak caused by _CID repair function" commit 6511a8b5b7a65037340cd8ee91a377811effbc83 upstream. Revert commit c27bac0314131 ("ACPICA: Fix memory leak caused by _CID repair function") which is reported to cause a boot issue on Acer Swift 3 (SF314-51). Reported-by: Adrien Precigout Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman