# FAQs for emmeans

#### emmeans package, Version 2.0.3

This vignette contains answers to questions received from users or posted on discussion boards like Cross Validated and Stack Overflow

## Contents

1. What are EMMs/lsmeans?
2. What is the fastest way to obtain EMMs and pairwise comparisons?
3. I wanted comparisons, but all I get is (nothing)
4. The model I fitted is not supported by emmeans
5. I have three (or two or four) factors that interact
6. I have covariate(s) that interact(s) with factor(s)
7. I have covariate(s) and am fitting a polynomial model
8. I have transformed covariate(s)
9. Some “significant” comparisons have overlapping confidence intervals
10. All my pairwise comparisons have the same P value
11. emmeans() doesn’t work as expected
12. All or some of the results are NA
13. If I analyze subsets of the data separately, I get different results
14. My lsmeans/EMMs are way off from what I expected
15. Why do I get `Inf` for the degrees of freedom?
16. I get exactly the same comparisons for each “by” group
17. My ANOVA F is significant, but no pairwise comparisons are
18. I wanted differences, but instead I got ratios (or odds ratios)
19. I asked for a Tukey adjustments, but that’s not what I got
20. `emmeans()` completely ignores my P-value adjustments
21. `emmeans()` gives me pooled t tests, but I expected Welch’s t
22. I want to see more digits
23. I want to reproduce results from Stata’s `margins` command

Index of all vignette topics

## What are EMMs/lsmeans?

Estimated marginal means (EMMs), a.k.a. least-squares means, are predictions on a reference grid of predictor settings, or marginal averages thereof. See details in the “basics” vignette.

## What is the fastest way to obtain EMMs and pairwise comparisons?

There are two answers to this (i.e., be careful what you wish for):

1. Don’t think; just fit the first model that comes to mind and run `emmeans(model, pairwise ~ treatment)`. This is the fastest way; however, the results have a good chance of being invalid.
2. Do think: Make sure you fit a model that really explains the responses. Do diagnostic residual plots, include appropriate interactions, account for heteroscadesticity if necessary, etc. This is the fastest way to obtain appropriate estimates and comparisons.

The point here is that `emmeans()` summarizes the model, not the data directly. If you use a bad model, you will get bad results. And if you use a good model, you will get appropriate results. It’s up to you: it’s your research—is it important?

Back to Contents

## I wanted comparisons, but all I get is (nothing)

This happens when you have only one estimate; and you can’t compare it with itself! This is turn can happen when you have a situation like this: you have fitted

    mod <- lm(RT ~ treat, data = mydata)

and `treat` is coded in your dataset with numbers 1, 2, 3, … . Since `treat` is a numeric predictor, `emmeans()` just reduces it to a single number, its mean, rather than separate values for each treatment. Also, please note that this is almost certainly NOT the model you want, because it forces an assumption that the treatment effects all fall on a straight line. You should fit a model like

    mod <- lm(RT ~ factor(treat), data = mydata)

then you will have much better luck with comparisons.

## The model I fitted is not supported by emmeans

You may still be able to get results using `qdrg()` (quick and dirty reference grid). See `?qdrg` for details and examples.

## I have three (or two or four) factors that interact

Perhaps your question has to do with interacting factors, and you want to do some kind of post hoc analysis comparing levels of one (or more) of the factors on the response. Some specific versions of this question…

- Perhaps you tried to do a simple comparison for one treatment and got a warning message you don’t understand
- You do pairwise comparisons of factor combinations and it’s just too much – want just some of them
- How do I even approach this?

My first answer is: plots almost always help. If you have factors A, B, and C, try something like `emmip(model, A ~ B | C)`, which creates an interaction-style plot of the predictions against B, for each A, with separate panels for each C. This will help visualize what effects stand out in a practical way. This can guide you in what post-hoc tests would make sense. See the “interactions” vignette for more discussion and examples.

Back to Contents

## I have covariate(s) that interact(s) with factor(s)

This is a situation where it may well be appropriate to compare the slopes of trend lines, rather than the EMMs. See the `help("emtrends"()`“)` and the discussion of this topic in the “interactions” vignette

## I have covariate(s) and am fitting a polynomial model

You need to be careful to define the reference grid consistently. For example, if you use covariates `x` and `xsq` (equal to `x^2`) to fit a quadratic curve, the default reference grid uses the mean of each covariate – and `mean(xsq)` is usually not the same as `mean(x)^2`. So you need to use `at` to ensure that the covariates are set consistently with respect to the model. See this subsection of the “basics” vignette for an example.

## I have transformed covariate(s)

Suppose you have this code:

    mod <- lm(log(strength) ~ machine + sqrt(diameter), data = fiber)
    emmeans(mod, "machine")

This yields adjusted means of `log(strength)` for each machine. But be aware that these results are predictions at the mean `diameter`, not at the mean `sqrt(diameter)`. That is because emmeans determines the variables in a model via `all.vars()`:

    all.vars(formula(mod))
    ## [1] "strength" "machine"  "diameter"

… and note that this includes `diameter`, not `sqrt(diameter)`.

It is quite reasonable to want the adjusted means computed at `mean(sqrt(diameter))`, and if you want that to be done, your options are:

1. Create a separate variable for `sqrt(diameter)` and use that in fitting the model
2. Use `at = list(diameter = mean(sqrt(fiber$diameter))^2)`
3. Use `cov.reduce = \(x) mean(sqrt(x))^2` (but this will be used for all covariates)

In (2) and (3), be careful that the transformed means be back-transformed.

Why can’t we just use the means of the transformed predictors automatically? Because in R, lots of model formulas include function calls for lots of different reasons, and it would be very difficult to identify which are intended to be treated as transformed predictors.

Back to Contents

## Some “significant” comparisons have overlapping confidence intervals

That can happen because it is just plain wrong to use [non-]overlapping CIs for individual means to do comparisons. Look at the printed results from something like `emmeans(mymodel, pairwise ~ treatment)`. In particular, note that the `SE` values are not the same*, and may even have different degrees of freedom. Means are one thing statistically, and differences of means are quite another thing. Don’t ever mix them up, and don’t ever use a CI display for comparing means.

I’ll add that making hard-line decisions about “significant” and “non-significant” is in itself a poor practice. See the discussion in the “basics” vignette

## All my pairwise comparisons have the same P value

This will happen if you fitted a model where the treatments you want to compare were put in as a numeric predictor; for example `dose`, with values of 1, 2, and 3. If `dose` is modeled as numeric, you will be fitting a linear trend in those dose values, rather than a model that allows those doses to differ in arbitrary ways. Go back and fit a different model using `factor(dose)` instead; it will make all the difference. This is closely related to the next topic.

## emmeans() doesn’t work as expected

Equivalently, users ask how to get post hoc comparisons when we have covariates rather than factors. Yes, it does work, but you have to tell it the appropriate reference grid.

But before saying more, I have a question for you: Are you sure your model is meaningful?

- If your question concerns only two-level predictors such as `sex` (coded 1 for female, 2 for male), no problem. The model will produce the same predictions as you’d get if you’d used these as factors.
- If any of the predictors has 3 or more levels, you may have fitted a nonsense model, in which case you need to fit a different model that does make sense before doing any kind of post hoc analysis. For instance, the model contains a covariate `brand` (coded 1 for Acme, 2 for Ajax, and 3 for Al’s), this model is implying that the difference between Acme and Ajax is exactly equal to the difference between Ajax and Al’s, owing to the fact that a linear trend in `brand` has been fitted. If you had instead coded 1 for Ajax, 2 for Al’s, and 3 for Acme, the model would produce different fitted values. Ask yourself if it makes sense to have `brand = 2.319`. If not, you need to fit another model using `factor(brand)` in place of `brand`.

Assuming that the appropriateness of the model is settled, the current version of emmeans automatically casts two-value covariates as factors, but not covariates having higher numbers of unique values. Suppose your model has a covariate `dose` which was experimentally varied over four levels, but can sensibly be interpreted as a numerical predictor. If you want to include the separate values of `dose` rather than the mean `dose`, you can do that using something like `emmeans(model, "dose", at = list(dose = 1:4))`, or `emmeans(model, "dose", cov.keep = "dose")`, or `emmeans(model, "dose", cov.keep = "4")`. There are small differences between these. The last one regards any covariate having 4 or fewer unique values as a factor.

See “altering the reference grid” in the “basics” vignette for more discussion.

Back to Contents

## All or some of the results are NA

The emmeans package uses tools in the estimability package to determine whether its results are uniquely estimable. For example, in a two-way model with interactions included, if there are no observations in a particular cell (factor combination), then we cannot estimate the mean of that cell.

When some of the EMMs are estimable and others are not, that is information about missing information in the data. If it’s possible to remove some terms from the model (particularly interactions), that may make more things estimable if you re-fit with those terms excluded; but don’t delete terms that are really needed for the model to fit well.

When all of the estimates are non-estimable, it could be symptomatic of something else. Some possibilities include:

- An overly ambitious model; for example, in a Latin square design, interaction effects are confounded with main effects; so if any interactions are included in the model, you will render main effects inestimable.
- Possibly you have a nested structure that needs to be included in the model or specified via the `nesting` argument. Perhaps the levels that B can have depend on which level of A is in force. Then B is nested in A and the model should specify `A + A:B`, with no main effect for `B`.
- Modeling factors as numeric predictors (see also the related section on covariates). To illustrate, suppose you have data on particular state legislatures, and the model includes the predictors `state_name` as well as `dem_gov` which is coded 1 if the governor is a Democrat and 0 otherwise. If the model was fitted with `state_name` as a factor or character variable, but `dem_gov` as a numeric predictor, then, chances are, `emmeans()` will return non-estimable results. If instead, you use `factor(dem_gov)` in the model, then the fact that `state_name` is nested in `dem_gov` will be detected, causing EMMs to be computed separately for each party’s states, thus making things estimable.
- Some other things may in fact be estimable. For illustration, it’s easy to construct an example where all the EMMs are non-estimable, but pairwise comparisons are estimable:

    pg <- transform(pigs, x = rep(1:3, c(10, 10, 9)))
    pg.lm <- lm(log(conc) ~ x + source + factor(percent), data = pg)
    emmeans(pg.lm, consec ~ percent)

    ## $emmeans
    ##  percent emmean SE df asymp.LCL asymp.UCL
    ##        9 nonEst NA NA        NA        NA
    ##       12 nonEst NA NA        NA        NA
    ##       15 nonEst NA NA        NA        NA
    ##       18 nonEst NA NA        NA        NA
    ##
    ## Results are averaged over the levels of: source
    ## Results are given on the log (not the response) scale.
    ## Confidence level used: 0.95
    ##
    ## $contrasts
    ##  contrast              estimate     SE df t.ratio p.value
    ##  percent12 - percent9    0.1796 0.0561 23   3.202  0.0110
    ##  percent15 - percent12   0.0378 0.0582 23   0.650  0.8614
    ##  percent18 - percent15   0.0825 0.0691 23   1.194  0.5201
    ##
    ## Results are averaged over the levels of: source
    ## Results are given on the log (not the response) scale.
    ## P value adjustment: mvt method for 3 tests

The “messy-data” vignette has more examples and discussion.

Back to Contents

## If I analyze subsets of the data separately, I get different results

Estimated marginal means summarize the model that you fitted to the data – not the data themselves. Many of the most common models rely on several simplifying assumptions – that certain effects are linear, that the error variance is constant, etc. – and those assumptions are passed forward into the `emmeans()` results. Doing separate analyses on subsets usually comprises departing from that overall model, so of course the results are different.

## My lsmeans/EMMs are way off from what I expected

First step: Carefully read the annotations below the output. Do they say something like “results are on the log scale, not the response scale”? If so, that explains it. A Poisson or logistic model involves a link function, and by default, `emmeans()` produces its results on that same scale. You can add `type = "response"` to the `emmeans()` call and it will put the results of the scale you expect. But that is not always the best approach. The “transformations” vignette has examples and discussion.

## Why do I get `Inf` for the degrees of freedom?

This is simply the way that emmeans labels asymptotic results (that is, estimates that are tested against the standard normal distribution – z tests – rather than the t distribution). Note that obtaining quantiles or probabilities from the t distribution with infinite degrees of freedom is the same as obtaining the corresponding values from the standard normal. For example:

    qt(c(.9, .95, .975), df = Inf)

    ## [1] 1.281552 1.644854 1.959964

    qnorm(c(.9, .95, .975))

    ## [1] 1.281552 1.644854 1.959964

so when you see infinite d.f., that just means its a z test or a z confidence interval.

Back to Contents

## I get exactly the same comparisons for each “by” group

As mentioned elsewhere, EMMs summarize a model, not the data. If your model does not include any interactions between the `by` variables and the factors for which you want EMMs, then by definition, the effects for the latter will be exactly the same regardless of the `by` variable settings. So of course the comparisons will all be the same. If you think they should be different, then you are saying that your model should include interactions between the factors of interest and the `by` factors.

## My ANOVA F is significant, but no pairwise comparisons are

First of all, you should not be making binary decisions of “significant” or “nonsignificant.” This is a simplistic view of P values that assigns an unmerited magical quality to the value 0.05. It is suggested that you just report the P values actually obtained, and let your readers decide how significant your findings are in the context of the scientific findings.

But to answer the question: This is a common misunderstanding of ANOVA. If F has a particular P value, this implies only that some contrast among the means (or effects) has the same P value, after applying the Scheffe adjustment. That contrast may be very much unlike a pairwise comparison, especially when there are several means being compared. Having an F statistic with a P value of, say, 0.06, does not imply that any pairwise comparison will have a P value of 0.06 or smaller. Again referring to the paragraph above, just report the P value for each pairwise comparison, and don’t try to relate them to the F statistic.

Another consideration is that by default, P values for pairwise comparisons are adjusted using the Tukey method, and the adjusted P values can be quite a bit larger than the unadjusted ones. (But I definitely do not advocate using no adjustment to “repair” this problem.)

## I wanted differences, but instead I got ratios (or odds ratios)

When a transformation or link involves logs, then, unlike other transformations, comparisons can be back-transformed into ratios – and that is the default behavior. If you really want differences and not ratios, you can re-grid the means first. Re-gridding starts anew with everything on the response scale, and no memory of the transformation.

    EMM <- emmeans(...)
    pairs(regrid(EMM))   # or contrast(regrid(EMM), ...)

PS – A side effect is that this causes the tests to be done using SEs obtained by the delta method on the re-gridded scale, rather than on the link scale. Re-gridding can be used with any transformation, not just logs, and it has the same side effect.

## I asked for Tukey adjustments, but that’s not what I got

There are two reasons this could happen:

1. There is only one comparison in each `by` group (see next topic).
2. A Tukey adjustment is inappropriate. The Tukey adjustment is appropriate for pairwise comparisons of means. When you have some other set of contrasts, the Tukey method is deemed unsuitable and the Sidak method is used instead. A suggestion is to use `"mvt"` adjustment (which is exact); we don’t default to this because it can require a lot of computing time for a large set of contrasts or comparisons.

## `emmeans()` completely ignores my P-value adjustments

This happens when there are only two means (or only two in each `by` group). Thus there is only one comparison. When there is only one thing to test, there is no multiplicity issue, and hence no multiplicity adjustment to the P values.

If you wish to apply a P-value adjustment to all tests across all groups, you need to null-out the `by` variable and summarize, as in the following:

    EMM <- emmeans(model, ~ treat | group)   # where treat has 2 levels
    pairs(EMM, adjust = "sidak")   # adjustment is ignored - only 1 test per group
    summary(pairs(EMM), by = NULL, adjust = "sidak")   # all are in one group now

Note that if you put `by = NULL` inside the call to `pairs()`, then this causes all `treat`,`group` combinations to be compared.

Back to Contents

## `emmeans()` gives me pooled t tests, but I expected Welch’s t

It is important to note that `emmeans()` and its relatives produce results based on the model object that you provide – not the data. So if your sample SDs are wildly different, a model fitted using `lm()` or `aov()` is not a good model, because those R functions use a statistical model that presumes that the errors have constant variance. That is, the problem isn’t in `emmeans()`, it’s in handing it an inadequate model object.

Here is a simple illustrative example. Consider a simple one-way experiment and the following model:

    mod1 <- aov(response ~ treat, data = mydata)
    emmeans(mod1, pairwise ~ treat)

This code will estimate means and comparisons among treatments. All standard errors, confidence intervals, and t statistics are based on the pooled residual SD with N - k degrees of freedom (assuming N observations and k treatments). These results are useful only if the underlying assumptions of `mod1` are correct – including the assumption that the error SD is the same for all treatments.

Alternatively, you could fit the following model using generalized least-squares:

    mod2 = nlme::gls(response ~ treat, data = mydata,
                     weights = varIdent(form = ~1 | treat))
    emmeans(mod2, pairwise ~ treat)

This model specifies that the error variance depends on the levels of `treat`. This would be a much better model to use when you have wildly different sample SDs. The results of the `emmeans()` call will reflect this improvement in the modeling. The standard errors of the EMMs will depend on the individual sample variances, and the t tests of the comparisons will be in essence the Welch t statistics with Satterthwaite degrees of freedom.

To obtain appropriate post hoc estimates, contrasts, and comparisons, one must first find a model that successfully explains the peculiarities in the data. This point cannot be emphasized enough. If you give `emmeans()` a good model, you will obtain correct results; if you give it a bad model, you will obtain incorrect results. Get the model right first.

Back to Contents

## I want to see more digits

The summary display of `emmeans()` and other functions uses an optimal-digits routine that shows only relevant digits. If you temporarily want to see more digits, add `|> as.data.frame()` to the code line. In addition, piping `|> data.frame()` will disable formatting of test statistics and P values (but unfortunately will also suppress messages below the tabular output).

## I want to reproduce results from Stata’s `margins` command

Stata is oriented towards observational data, and its `margins` command takes a counterfactuals approach. Thus, try adding a `counterfactuals` argument (see help for `ref_grid`). For example, to reproduce the results in Stata’s Example 6 for `margins`, do:

    margex <- haven::read_dta("https://www.stata-press.com/data/r18/margex.dta")
    margex.glm <- glm(outcome ~ sex * factor(group) + age, data = margex,
                      family = binomial)
    emmeans(margex.glm, "sex", counterfactuals = "sex")

Index of all vignette topics